Data storage for the T.codes

hi , sap experts ,
If we maintain the data for the following t.code's in which tables the data will be stored:
T.codes
po13
ppoc_old
ppoce
ppsc
Thanks in advance

Hi Prasad,
Go to T-code se16 go get all the objects in table HRP1000 and for objects relationships HRP1001
Objects
Organizational unit - O
Job - C
Position - S
Person - P
Task - T
Cost Center - K
Work Center - A
Relationships
organizational unit to organizational unit
jobs to positions
organizational unit to positions
position to position
position to persons
Cheers
Ratan

Similar Messages

  • Error " Data missing for the entry check while creating a new waste code

    Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
    This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
    I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
    I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
    I have checked everything several times watching for typos or looking for a missing step.
    I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
    I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
    Phrase set to Z_EHS_WA_WASTE_CATALOG.
    enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
    After matching up the master data It should work fine but I might be missing something to get it running ok.
    ¿Any idea?
    Regards,
    Alvaro

    Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
    1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
    2. Create a copy of the 5 characteristics included in this class.
    SAP_EHS_1024_001_WASTE_CATALOG
    SAP_EHS_1024_001_WASTE_CODE
    SAP_EHS_1024_001_WA_SUBCATEG
    SAP_EHS_1024_001_WA_CATEGORY
    SAP_EHS_1024_001_REMARK
    change the name by
    Z_EHS_WA_WASTE_CATALOG
    Z_EHS_WA_WASTE_CODE
    Z_EHS_WA_SUBCATEG
    Z_EHS_WA_CATEGORY
    Z_EHS_WA_REMARK.
    I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
    I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
    3. Create phrase sets for each new category. with same name.
    4. Match up the master data.
    5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
    I think I have followed all the steps, but for some reason it doesn't find the catalog
    The phrase for the catalog is EWC in english and LER in spanish.
    Regards
    Alvaro.

  • Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"   TIme machine won't load backup "error code -8003"

    Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
    now Aperture won't open,  get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"  
    TIme machine won't load backup "error code -8003"
    Tried reloading Aperture 3.2 but get same result.

    You’re running an outdated copy of Safari on your Desktop. That won’t work.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
    If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • How to reset data for the company code 1000

    Hi Gurus,
    I am practicing SAP SD on a sandbox server as am learning it.
    But i see that the standard data for the company code 1000 has been altered by previous users and most of the standard setttings have been changed.
    Due to this am having a lot of issues while configuring a new company code by copying it from 1000.
    Please help me reseting the data for the company code 1000 so that it will be easier for customizing and learning.
    Regards,
    Harish

    Hi Harish,
    Follow the step given below
    SPRO --> Enterprise Structure --> Definition --> Financial Accounting --> Edit, Copy, Delete, Check Company Code
    A pop screen will appear which will give you two options
    1)  Copy, delete, check company code
    2)  Edit Company Code Data
    Select option one
    On next screen --> Click at " Check org. object" or press F8 --> It will ask your company code --> enter your company code 1000 --> Enter
    It will check all the related table and if it find any discrepency
    then it will show you one pop up screen
    Errors in
    foreign key dependencies
    Do you want the error log
    displayed now?
    Click at Display now --> correct all the fields which are wrongly maintained.
    Hope this helps
    Regards,
    MT

  • SR830 data storage for rs232

    Hi,
    I found a LabVIEW code here which can storage data from input signal (e.g.A/I)in SR830 and transfer it by the GPIB.
    I used function generator to generate a sine wave with frequency:30Hz& Vp-p:100mVolt , conencting to SR830.
    Clearly ,I got a correct result when i used the code by GPIB communication interface(left graph).
    Than,I tried to change the communication interface RS232 to accept the same signal,but it has mistakes(right graph).
     Here is original code "data storage for GPIB"
    Here is rewrite code for RS232 by myself,but what's wrong i did?
    Attachments:
    SR830 DATA STORAGE EXAMPLE.VI ‏54 KB
    scan test1.vi ‏43 KB

    The SR830 expects three integer arguments (separated by commas) for the TRCA? query:
    * i = 1 or 2 specifies which buffer to download from
    * j >= 0 specifies the starting point
    * k>=1 specifies how many points to download
    If you know k, you can calculate the exact number of bytes in the response. For your code, which downloads 4000 points at a time, that will be something like 60 kB (if memory serves, the response in ASCII transfer mode is 15 bytes/value). Make sure that you're not hitting any timeout or serial buffer size limits with a transfer of that size.  
    Edit: You have your bitrate set to 9600 baud (1200 bytes/second) and a 10 second timeout. That will read 12 kB before timing out, or 1/5th of your transfer. The 830 supports baud rates up to 19,200, which will help, but you'll also need either a longer timeout or to transfer your data in smaller chunks. 

  • I'm trying to upgrade my iCloud storage for the new price.

    I'm trying to upgrade my iCloud storage for the new price, but it doesn't gives me the option of 20G for $0.99 a month.
    How can I get 20g for $0.99 a month?
    Thanks!

    Katherine,
    have you read the message in the panel? Something is wrong with your credit card. Perhaps you have to enter a new date of expiration.
    In the small print it says, there is still a purchase, that needs paying,"Ugly Heart" with an amount of R 9.99. And "We were unable to authorise your credit card for this purchase".  You will first have to update your Billing Information before you can proceed to make a new purchase for upgraded storage.  Click "Account Details" in the iCloud panel.
    -- Léonie
    If you cannot fix the account from the iCloud panel, open iTunes and sign into the "Store" menu, Then use the "Store > View account" item there to check for problems with your Billing Information.

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • Performance for the below code

    Can any one help me in improving the performance for the below code.
    FORM RETRIEVE_DATA .
    CLEAR WA_TERRINFO.
    CLEAR WA_KNA1.
    CLEAR WA_ADRC.
    CLEAR SORT2.
    *To retrieve the territory information from ZPSDSALREP
    SELECT ZZTERRMG
           ZZSALESREP
           NAME1
           ZREP_PROFILE
           ZTEAM
         INTO TABLE GT_TERRINFO
         FROM ZPSDSALREP.
    *Preparing Corporate ID from KNA1 & ADRC and storing it in SORT2 field
    LOOP AT GT_TERRINFO INTO WA_TERRINFO.
      SELECT SINGLE * FROM KNA1 INTO WA_KNA1
                      WHERE KUNNR = WA_TERRINFO-SALESREP.
      SELECT SINGLE * FROM ADRC INTO WA_ADRC
                      WHERE ADDRNUMBER = WA_KNA1-ADRNR.
      IF NOT WA_ADRC-SORT2 IS INITIAL.
      CONCATENATE 'U' WA_ADRC-SORT2 INTO SORT2.
      MOVE SORT2 TO WA_TERRINFO-SORT2.
    MODIFY GT_TERRINFO1 FROM WA_TERRINFO.
      APPEND WA_TERRINFO TO GT_TERRINFO1.
      CLEAR WA_TERRINFO.
      ENDIF.
      CLEAR WA_KNA1.
      CLEAR WA_ADRC.
    ENDLOOP.
    ENDFORM.                    " RETRIEVE_DATA

    Hi
    The code is easy so I don't think you can do nothing, only u can try to limit the reading of KNA1:
    FORM RETRIEVE_DATA .
      CLEAR WA_TERRINFO.
      CLEAR WA_KNA1.
      CLEAR WA_ADRC.
      CLEAR SORT2.
    *To retrieve the territory information from ZPSDSALREP
      SELECT ZZTERRMG
      ZZSALESREP
      NAME1
      ZREP_PROFILE
      ZTEAM
      INTO TABLE GT_TERRINFO
      FROM ZPSDSALREP.
      SORT GT_TERRINFO BY SALESREP.
    *Preparing Corporate ID from KNA1 & ADRC and storing it in SORT2 field
      LOOP AT GT_TERRINFO INTO WA_TERRINFO.
        IF KNA1-KUNNR <> WA_KNA1-KUNNR.
          SELECT SINGLE * FROM KNA1 INTO WA_KNA1
               WHERE KUNNR = WA_TERRINFO-SALESREP.
          IF SY-SUBRC <> 0.
            CLEAR: WA_KNA1, WA_ADRC.
          ELSE.
            SELECT SINGLE * FROM ADRC INTO WA_ADRC
                                     WHERE ADDRNUMBER = WA_KNA1-ADRNR.
            IF SY-SUBRC <> 0. WA_ADRC. ENDIF.
          ENDIF.
        ENDIF.
        IF NOT WA_ADRC-SORT2 IS INITIAL.
          CONCATENATE 'U' WA_ADRC-SORT2 INTO SORT2.
          MOVE SORT2 TO WA_TERRINFO-SORT2.
    * MODIFY GT_TERRINFO1 FROM WA_TERRINFO.
          APPEND WA_TERRINFO TO GT_TERRINFO1.
          CLEAR WA_TERRINFO.
        ENDIF.
      ENDLOOP.
    ENDFORM. " RETRIEVE_DATA
    If program takes many times to upload the data from ZPSDSALREP, you can try to split in sevaral packages:
    SELECT ZZTERRMG ZZSALESREP NAME1 ZREP_PROFILE ZTEAM
      INTO TABLE GT_TERRINFO PACKAGE SIZE <...>
      FROM ZPSDSALREP.
      SORT GT_TERRINFO BY SALESREP.
    *Preparing Corporate ID from KNA1 & ADRC and storing it in SORT2 field
      LOOP AT GT_TERRINFO INTO WA_TERRINFO.
        IF KNA1-KUNNR <> WA_KNA1-KUNNR.
          SELECT SINGLE * FROM KNA1 INTO WA_KNA1
               WHERE KUNNR = WA_TERRINFO-SALESREP.
          IF SY-SUBRC <> 0.
            CLEAR: WA_KNA1, WA_ADRC.
          ELSE.
            SELECT SINGLE * FROM ADRC INTO WA_ADRC
                                     WHERE ADDRNUMBER = WA_KNA1-ADRNR.
            IF SY-SUBRC <> 0. WA_ADRC. ENDIF.
          ENDIF.
        ENDIF.
        IF NOT WA_ADRC-SORT2 IS INITIAL.
          CONCATENATE 'U' WA_ADRC-SORT2 INTO SORT2.
          MOVE SORT2 TO WA_TERRINFO-SORT2.
    * MODIFY GT_TERRINFO1 FROM WA_TERRINFO.
          APPEND WA_TERRINFO TO GT_TERRINFO1.
          CLEAR WA_TERRINFO.
        ENDIF.
      ENDLOOP.
    ENDSELECT.
    Max

  • Setting date format for the entire SQL Server installation - SQL Server 2008 R2-2012

    Hi,
    I need to safeguard the behaviour of SQL codes that inserting into SQL tables with some date columns. For this purpose, I need to change the date format for the SQL instance and not using CONVERT and CAST.
    I've seen the SET DATE FORMAT statement, but if I use it, could I solve my problem?
    Thanks

    The language setting is related to the database user.
    BOL: "DEFAULT_LANGUAGE = { NONE | <lcid> | <language name> | <language alias> }              
    Specifies the default language for the new user. If a default language is specified for the user and the default language of the database is later changed, the users default language remains as specified.
    If no default language is specified, the default language for the user will be the default language of the database. If the default language for the user is not specified and the default language of the database is later changed, the default
    language of the user will change to the new default language for the database."
    LINK: http://technet.microsoft.com/en-us/library/ms173463.aspx
    The default language setting can be overridden by SET LANGUAGE for the session:
    http://technet.microsoft.com/en-us/library/ms174398.aspx
    Example:
    SET LANGUAGE us_english; -- mdy
    SELECT CAST ('12/13/2014' as DATE); -- 2014-12-13
    GO
    SET LANGUAGE british; -- dmy
    SELECT CAST ('12/13/2014' as DATE);
    GO
    (1 row(s) affected)
    Changed language setting to British.
    Msg 241, Level 16, State 1, Line 2
    Conversion failed when converting date and/or time from character string.
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Reg : Enhacement for the transaction code MD04

    Hi experts,
    I have implemented an user exit for the transaction code MD04 where in the stock/requirement list I am supposed to add a new column for the exception number which displays the exception description for the corresponding exception number.
      The coding part for fetching the exception description for the corresponding exception number is done in the include 'ZXM61U03'.
      The problem is in the importing parameter IMDEZEXIT in which all the screen data will be present basing on which the data fetching is done .The AUSKT(Exception number) value is not getting populated . All the other data in the row is getting populated.
    Please suggest e a solution for this.
    Regards,
    Ramkishore.

    Hi
    Hope it will help you.
    reward if help.
    Please use FM MD_STOCK_REQUIREMENTS_LIST_API to get all information for transaction MD04/MD05.
    You might also want to check out the function module API.
    MD_MRP_LIST_API
    and also
    check this link for extracting data from MRP tables:
    http://www.sap-img.com/pp001.htm

  • Search for the t-code where the specefic output type is used

    Hi
    I want to know how can we search for the t-code used  for a  specefic output type in use?
    I have a requirement where in i have a output type, i knwo teh prog name and the form name...
    i know it is used in SD and billing but i am not able ot exactly pin point as to in which t-code to be used..so that i can check the output throught the T-code.
    Experts sugget!!
    Thanks
    Prashant

    Hi
    It is used for a Standard t-code i want to find that T-code. Through NACE the outputtype (which i already have) i can find teh prog name and the form name.
    and through SPRO also its the same info...
    i want to knwo for SD-> Billing->INvoice i can find the output type...i want to knwo what T-code needs to be run and on givign the data and running the out put type from the menu and choosing my OUTput type...and seeing the output in the print format.
    Hope you got my problem.Thanks for the reply.
    Prashant

  • [svn:osmf:] 15581: Better coding style and some comments for the previous code submission.

    Revision: 15581
    Revision: 15581
    Author:   [email protected]
    Date:     2010-04-19 17:14:00 -0700 (Mon, 19 Apr 2010)
    Log Message:
    Better coding style and some comments for the previous code submission.
    Modified Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

    Revision: 15581
    Revision: 15581
    Author:   [email protected]
    Date:     2010-04-19 17:14:00 -0700 (Mon, 19 Apr 2010)
    Log Message:
    Better coding style and some comments for the previous code submission.
    Modified Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

  • URGENT HELP ME OUT !!! NO FILED DEFINED FOR THE FUNCTION CODE

    hello friends,
                       I am working with module programming t-se80,
    i have made a simple screen with some filed on it.Along with this i have made gui staus with 2 icons create and display and i have assiged text to them also , also they appear in screen when i run the t-code.
    problem is that when i click on any of icon i am unable to debug my code and system prompts an information message
    "NO FILED DEFINED FOR THE FUNCTION CODE ".
    In the screen elements with elemnt ok if have assigned ok_code in the screen and also a data statement in the code.
    Still i m unable to monitor the debuger.
    when ever i run the t-code and on the debuger and when i click on the create icon nothing happens?/
    kindly help me urgently
    with thanks
    sam

    Hi,
    It seems you have not assigned Function codes to your buttons in GUI. Assign them d relevant fct codes in Screen Painter (if u've created 2 push buttons) or menu painter.
    Hope this wil soleve your problem.
    Reward points if helpful.
    Thnx
    Pradipta K Mishra

  • Can we use SQL Server as a primary data storage for SharePoint 2013?

    Is it possible to use external SQL Server as a primary data storage for SharePoint 2013?
    Having this implemented we can generate reports, query data and it would become very very powerful to use.
    Or
    Is there a way to keep on using existing content databases and using external SQL Server as a secondary data storage at the same time. So I want it to be like redundant data in SQL Server.
    Thanks 

    Hi，
    Not sure if I understand your question correctly, SharePoint has its own content database storing SharePoint list data, we can use SSRS/SSAS integated with SharePoint mode to use sharepoint list as datasource to generate reports.
    http://technet.microsoft.com/en-us/library/bb326358(v=sql.105).aspx
    http://sqlmag.com/business-intelligence/delivering-bi-through-sql-server-and-sharepoint
    http://www.mssqltips.com/sqlservertip/2068/using-a-sharepoint-list-as-a-data-source-in-sql-server-reporting-services-2008-r2/
    Thanks
    Daniel Yang
    TechNet Community Support

Maybe you are looking for