Data synchronization between ERP and BI

Hi Experts,
We have done a client copy from BI production to BI test and later after 2 weeks we have done client copy of ERP production source system to ERP test source system.
As we have 2 weeks of gap inbetween these two client copies and ERP being the later, we have 2 weeks of more data in ERP test system which is not available in BI test.
Now, My requirement is to transfer these two weeks of data from ERP test source system to BI test system.
I hope some of you would have faced the similar requirement and any help on this seriously appreciated.
regards,
Magaan.

Hi vamsi nagaraju
it depends on wich version of ECC you are using, if you are using ECC 6.0 or ECC 5.0 all records are in table FAGLFLEXT but if you are using R/3 4.7, 4.6 etc, all records are in ECMCT for consolidation purposes.
Try to run T-code F.01 for balance sheet in both versions.
which validations do you want?
regards!!

Similar Messages

Data Synchronization between Planning and HPCM

Hello,
How it is possible to synchronize the Data between HPCM and Planning?
I have 12 Dimensions in HPCM and only 8 Dimensions in Planning.
8 Dimensions in HPCM are like Planning dimensions + 2 Standard HPCM dimensions + 2 staging dimensions.
I want to move the Data from HPCM to Planning (Both 11.1.1.3)
Many thanks in advance,
Whitebaer

Are you re-initialising your Source System after adding new members to EBS?
Regards,
Gavin

Help, about data synchronization between C++ and PHP API!

I use Berkeley DB XML as my Server's database, the client access the database via http by C++ API. I don't close the XmlManager and XmlContainer after read and write the database for better performance. However, I provide another way to manipulate the database via web by PHP. After I updated the data by PHP, I found that I couldn't catch the update.
If I close the XmlManager and XmlContainer after read and write the database every time, the problem disappeared. But I can't do that for performance.
How can I solve this problem? Thanks!

First of all, thank you for your attention.
I don't share the same environment for the two processes, but I seted the same configure flags on the environment. The flags as follows:
DB_CREATE|DB_INIT_LOCK|DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN|DB_RECOVER;
The C++ code as follows:
//C++ code
UINT32 envFlags = DB_CREATE|DB_INIT_LOCK|DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN|DB_RECOVER;
INT32 lRet = 0;
string ctnName = "rls_services.bdbxml";
string docName = "index.xml";
CHAR acXQuery[256] = {0};
CHAR acXmlDoc[] = "<test>C++ test</test>";
//from
DbEnv *pDbEnv = new DbEnv(0);
XmlManager *pxmlMgr = NULL;
pDbEnv->open("/usr/local/xdms", envFlags, 0);
pxmlMgr = new XmlManager(pDbEnv, DBXML_ADOPT_DBENV);
lRet = pxmlMgr->existsContainer(ctnName);
if(0 == lRet)
     pxmlMgr->createContainer(ctnName);
XmlContainer xmlCtn = pxmlMgr->openContainer(ctnName);
//to
// the code between 'from' and 'to' is a seperate function
XmlQueryContext xmlQC = pxmlMgr->createQueryContext();
XmlUpdateContext xmlUC = pxmlMgr->createUpdateContext();
sprintf(acXQuery, "doc(\"%s/%s\")", ctnName, docName);
XmlQueryExpression xmlQE = pxmlMgr->prepare(acXQuery, xmlQC);
XmlResults xmlResult = xmlQE.execute(xmlQC);
XmlDocument xmlDoc;
if (xmlResult.hasNext())
xmlDoc = xmlCtn.getDocument(docName);
xmlDoc.setContent(acXmlDoc);
xmlCtn.updateDocument(xmlDoc, xmlUC);
else
xmlDoc = pxmlMgr->createDocument();
xmlDoc.setName(docName);
xmlDoc.setContent(acXmlDoc);
xmlCtn.putDocument(xmlDoc, xmlUC);
// I don't close the Container and Manager for performance
The PHP code as follow:
<php?
$DB_DIR = "/usr/local/xdms";
$env = new Db4Env();
$enFlags = DB_CREATE|DB_INIT_LOCK|DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN|DB_RECOVER;
$env->open("/usr/local/xdms", $enFlags, 0);
$xmlManager = new XmlManager($env, 0);
$ctnName = 'rls_services.bdbxml';
$docName = 'index.xml';
$docContent = '<test>PHP test</test>';
if (!$xmlManager->existsContainer($ctnName))
     return ;
$xmlCtn = $xmlManager->openContainer($ctnName);
$xmlQC = $xmlManager->createQueryContext();
$xmlUC = $xmlManager->createUpdateContext();
$acXQuery = "doc('".$ctnName.'/'.$docName."')";
$xmlQE = $xmlManager->prepare($acXQuery, $xmlQC);
$xmlResult = $xmlQE->execute($xmlQC);
if ($xmlResult->hasNext())
     $xmlDoc = $xmlCtn->getDocument($docName);
     $xmlDoc->setContent($docContent);
     $xmlCtn->updateDocument($xmlDoc, $xmlUC);
else
     $xmlDoc = $xmlManager->createDocument();
     $xmlDoc->setName($docName);
     $xmlDoc->setContent($docContent);
     $xmlCtn->putDocument($xmlDoc, $xmlUC);
unset($xmlDoc);
unset($xmlCtn);
?>
The code between 'from' and 'to' excute only one time when server start.
After the server started, I write data by PHP. I can read out the data that
writed by PHP just now, but I can't read out the data by C++ because I don't
close the XmlContainer and XmlManager.
After I restarted the server, I can readout the data by C++. But I can't
open and close database for each request for performance as a server.
what should I do ? Thank you!
Whether I express my question clearly or not?

Data sync between oracle and sql server

Greetings Everyone,
Your expert views are highly appreciable regarding the following.
We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
If you can pour in more knowledge then it's great.
Thank You.

Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
These are the steps, from a high level:
1.Get the appropriate GG Software for your source and target OS.
2.Install GG on source and target systems.
3.Create Manager and extract processes on source system
4.Create Manager and replicat processes on target system
5.Start these processes.
First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
Here is a good article that may be handy in your case.
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
Edited by: satrap on Nov 30, 2012 8:33 AM

Need to syncronize the Regions between ERP and CRM

Hi MW gurus,
I didn't find a adapter object to synchronize the 'Regions' between ERP and CRM. The regions are stored to the table T005S in ERP and the same table exists in CRM too.
Will any one of you adivce on how to sync. these two tables using a replication object?
Thanks,
Raj

Dear Friends,
Start initial load of object "DNL_CUST_BASIS5"
Refer:
http://www.scribd.com/doc/33952988/Download-Country-Region-V-T005S-From-R3-to-CRM-2007-06Jun2010
Thanks & Regards,
Rajagopal
Chennai - INDIA

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Basic question regarding Contract data exchange between CRM and ERP

Hi,
1) At a very general level, can somebody tell me via what technology are contract documents exchanged between CRM and ERP? IDocs, RFC modules or proxies?
2) Is it possible to sychronise changes in a contract, e.g. if the contract is changes in the ERP system, those changes are auotomatically updated in the CRM contract?
3) Can somebody point me to any documentation on this?
Kind Regards,
Tony.

contracts are exchanged between CRM ans ERP ssytem ny RFC and FM , you use object SALESCONTRACT for this,it is possible to synchronize changes between both the systems

Data exchange between SCM and ERP

Hi Guys,
Can you please tell what all data is exchanged between ERP system and SCM system.
I am doing a project to find out the exchange of data between these systems, it would be great if u can help me out or throw a direction to find these details.
Thanks a lot guys
Regards,
Kumar
POINTS ASSURED

Hi Kumar,
Please find detailed document help link as below:
http://help.sap.com/saphelp_scm70/helpdata/en/64/08533b89050863e10000000a114084/frameset.htm
For master data following data flow occurs from ECC to APO:
u2022     Products
u2022     Locations
u2022     Classes and characteristics
u2022     Batches
u2022     Setup groups
u2022     Resources
u2022     Production Process Modes / Produtc Data structures
Transaction data flow
u2022     Sales documents
u2022     Stocks
u2022     Inspection lots
u2022     Purchase orders and requisitions
u2022     Planned orders
u2022     Maintenance orders
u2022     Project / network orders
Regards
Datta

Bp master data match between crm and erp

hi gurus,
is there a match list indicating the customer master fields in erp and in crm.
which field can be synchronized to crm? which field is the target one?
can gurus help provide? thank you.

Hi Daniel,
I am not sure if there is a list for that. But, the mandatory fields in R/3 should be same as the mandatory fields in CRM for the data transfer to be successful. You can set that up in transaction OVT0.
Regards,
Shwetha

Replication of text determination (business partner) between ERP and CRM

Hello,
in ERP I have maintained a text determination procedure Z1 and assigned it to the text object "KNA1". The textprocedure include the Text ID's "Z011" and "Z020".
In CRM exist the text object "KNA1" and "BUT000". I have customized a a text determination procedure "Z1" and the same Text ID's as in ERP, to booth text objects.
The text ID's don't be replicated, no matter i maintain it in CRM or ERP.
Can anybody tell me, how can I replicate the content of the text ID's? What is the relevant text object in CRM?
Thanks for help
Regards
Andreas

Andrea,
There are objects for replicating the data between CRM and CDB.
CRM_DNL_TTXOB and CRM_DNL_TTXID.
But none for replication between R/3 and CRM. WE need to maintain it manually.
Regards,
Aj.

Password synchronization between OID and AD - 10.1.2

Hi,
I've some questions about the following issue:
I've tried to setup the password synchronization between OID 10.1.2 and active directory, with the intent of exporting ldap users from OID to AD..
Well, the bootstrap gone fine, but when I tried to activate the export of password in the activexp.map configuration file,
I've obtained this:
*Writer Thread - 0 - [LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0*
for each entry I tried to export...
I've opened a SR on metalink and I've received the following answer:
_" As shown by the synchronization profile, currently you have a mapping for the password from OID to AD._
_userpassword: : :person:unicodepwd: :person:_
_According to the documentation, password synchronization requires the directories to be configured for SSL mode:_
    _http://download-uk.oracle.com/docs/cd/B14099_12/idmanage.1012/b14085/odip_actdir003.htm#CHDEFIED_
_18.3.2.8 Synchronizing Passwords_
_You can synchronize Oracle Internet Directory passwords with Active Directory._
   _You can also make passwords stored in Microsoft Active Directory available in Oracle Internet Directory._
   _Password synchronization is possible only when the directories run in SSL mode 2, that is, server-only authentication."_
The SSL setup is the only way to achieve this, or there's another alternative?
Thanks

Yes. It needs to be in SSL.
http://download-uk.oracle.com/docs/cd/B14099_12/idmanage.1012/b14085/odip_actdir003.htm#CHDCJHHB
Some excerpts:
Active Directory Connector uses SSL to secure the synchronization process. Whether or not you synchronize in the SSL mode depends on your deployment requirements. For example, synchronizing public data does not require SSL, but synchronizing sensitive information such as passwords does. To synchronize password changes between Oracle Internet Directory and Microsoft Active Directory, you must use SSL mode with server-only authentication, that is, SSL Mode 2.
-shetty2k

User base Synchronization between SAP and MS Active Directory Server

Dear all!
I'm using Web AS 6.20 ABAP and MS Active Directory Server based on Win 2003 Server.
i successfully implemented the synchronization of user data between SAP and the ADS.
My question: Is there a way to customize the users on Active Directory Server in regard to their SAP authorization (roles auth. objects etc.)?
Currently I don't have a clue how to do this.
Regards,
Christoph

Have you searched on SDN for "Active Directory"? That turns up a number of results. I think your expectation might be backwards though, it's not how ADS exposes SAP specific data but how SAP uses ADS to store SAP specific data. My understanding (from quite some time ago so I am fuzzy on this) is that SAP can use ADS in much the same way it can use LDAP as an external user store.
The Security Newsletter from November 04 [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/sap security newsletter november 2004.pdf] mentions that a webinar is hosted on SDN about this exact topic, unfortunately I was unable to find a direct link.
Regards,
Marc g

Data synchronization between ERP and BI

Similar Messages

Maybe you are looking for