Data Tab missing in Report Manager

I have Desktop Intelligence XI installed but in Report Manager, the Data Tab is missing.  The Map Tab is there.  Anyone know how to get this back?

Figured it out.  Was a permissions problem solved through the Central Management Console.

Similar Messages

  • Customer Data Tab missing fileds.

    Hi Experts,
    We have upgrade from CRM 4 to CRM 5. ( I am totally new to CRM)
    When I entered tcode BP and choose Consumer , we have a Customer Data tab, in that tab some fields are missing. Do not phone , Do not Call fields. its there in CRM 4, but not in this version.
    Can someone please help me .. how to solve this problem.
    Thanks in Advance.
    Raghu

    Hi
    Check the Data sets of the role you are looking for BP and compare the CRM4.0 and 5.0 systems do compare the dataset changes and also check the field groupings  for BP role in CRM 5.0 system if any field radio button is turned to hide mode change it to optional radio button then save field grouping
    then you will see the fields
    reward points if helpful
    Regards
    Dinaker vikas K

  • Cellular data tab missing

    I have an ipad 2 and subscribe to a cellular data plan.  Upgraded to ios 5.1.1.  Now the "cellular data" tab is missing from settings.  Have tried to restore but no luck.  Does anyone know how to get the cellular data tab back?  Thanks

    If your iOS detail provided is accurate, I'm pretty sure the Cellular Data on/off option wasn't avaialble until iOS 4.0.

  • Additional Data tab missing from PO items

    Hi Experts,
    The Additional Data tab for items is missing when I try creating a PO.
    I have compared the screen layout, with the system where it is working fine, and found no difference in the configuration.
    Please suggest, how can I enable the "Additional Data" tab in PO for items.
    With Warm Regards,
    Sayan

    Hi Preeti/ Dev,
    Please refer to the below screen-shot.
    Here you will find the Additional Data tab in the Items section.
    The Additional Data tab in the header section is appearing fin

  • How to avoid data tab in webi report.

    Hi BO gurus,
    I need one clarification, while seeing the webi report(edit mode) we can see data tab left side of report. how can we avoid the data tab?
    I mean with out  data tab .
    Regards,
    Arjun

    Hi Arjun,
    Please find the above requirement available below:-
    BI 4.1 Web Intelligence GUI Customization - Business Intelligence (BusinessObjects) - SCN Wiki
    SAP KBA 1859784 - How to disable the Design and Data buttons in Web Intelligence in BI 4.1 also available for the same.
    Hope this helps.
    Regards,
    Manpreet

  • Master data text missing in reports

    Dear All,
    In my report, some text for infoobject master data is missing. When I see the text table of that, entry for the interval containing 31/12/9999 is not there. I checked in R3 and there also this entry is absent. This is fine and no issues. This is in BI Quality.
    Same is not the case in Production. Here entry is there in BI for 31/12/9999 in text table but in R3 Prod, entry is not there.
    My question:
    How come the entry is there in text table in BI Prod for 31/12/9999 ? Has someone extracted it earlier when there was an entry in R3 or there could be some other reason ? If someone has extracted it earlier, and now in R3 prod, entry is not there, then this should immediately reflect in BI ?
    Please clear my confusions.
    Regards,
    Srinivas

    Fine with the answers. But how come the table in BI system is not in sync with the R3 ? Since the text is absent in R3 for the interval 31/12/9999, so it should be blank too in BI after the most recent update ? This is the property of master data.
    Thanks,
    Srinivas

  • Addnl data tab missing in cv01n

    Dear SAP Experts,
    We have created a content server 640 with MAX DB and attached to our ECC6.0 system.
    we have created a repository and we could connect through the csadmin to that repositiry.
    Now when we are trying to upload any document from the cv01n. we are not able to find the tab addnl data in cv01n.
    Please help us how to upload the document in cv01n to store in the created repository.
    Thanks
    Ram Kumar.

    Hi Ram,
    As said by other experts, the originals (Attachments) can be uploaded in a DIR using either 'Originals' section or through 'Originals' tab. If these section/tab is not visible, then check the configuration of a document type (tcode-DC10) for suppressed fields((Screenshot attached).
    Document type configuration screenshot:
    And to answer your second question, 'Additional data' tab appears in DIR only if it is configured in the document type(shown in the above screenshot) or if you are manually linking the class to a DIR using classification button(Appear above the document number).
    In configuration, only one class can be linked and if multiple classes are to be linked then manual method can be used.
    Coming to your third question - Storage of your attachment in content repository,
    After uploading your document using 'open original', right-click on the original and choose 'Check-in' to select the 'storage category' created under the content repository.
    Hope this helps.
    Regards,
    Ravi

  • SCCM report data are missing inside report since Update SCCM 2012 to R2 Cu1

    Hi All,
    I encountered an issue regarding certains SCCM reports after migrating to SCCM R2 CU1.
    After this upgrade, I've already encountered some issues on differents reports .. reports where we need to select a collection or patches or computers from a drop list (all theses drop list were empty).
    I resolved these issues by adding the "read" security permission in the security role dedicated to our Support Team. (Read permission is now applied on Collections, Packages ect...)
    This sort of report works well now.
    But this same Team show me another issue where I did not find any resolution.
    In the categorie called "Hardware - General", we have a report named "Computer information for a specific computer" where, as you know, we normally could find some informations regarding a computer.
    In fact, the only informations which are visible through this report are the NetbiosName,Username, Domain User & computer and IP adress.
    All others informations are not displayed.
    If I use this report with a user who has admin rights in SCCM (which is not the fact with my support team of course) ...all informations are displayed normally.
    It seems that it looks like the first read rights issue that I encountered at the beginning, but I did not find where could be the cause of this issue
    Does anyone has already seen this sort of issue ?

    In CM12R2 RBA is now enabled for report. So this tell me that you have NOT grant the support team access to the data and therefore this is normal.
    There is a quick fix for this see Brian post.
    http://www.mnscug.org/blogs/brian-mason/162-report-user-role
    http://www.enhansoft.com/

  • Battery not detected after windows install. Batteries tab missing in device manager too

    My eM250 still charges fine but I have no way to see how much juice I have left. no after market meters or anything like that has helped. How can I fix such an odd problem?

    iluvwhtchix,
    I've looked at the quick start and service guide and do not see a standby button, what am I missing? LoL 
    It just sounds like there are some drivers that did not install, was this with the media that was sent from eMachines? There might be a drivers disc that could resolve the issues, if so. You can always go check to see if you have the right drivers on our eMachines support page.

  • Report Manager - Data collection

    Hi,
    I'm having problems with data collection on a number of servers.
    Essentially, I've configured data logging on a number of servers
    by creating a job in the 'Manage jobs' window, using the task type
    'data logging' and running it against a number of hosts.
    Unfortunately, when I look at the 'data collection' window via report
    manager, a number of host entries have an excamation mark attached
    which implies that data has not been collected. If I look at the attribute editor for one of the logged entries on an affected server, the history tab
    clearly states that the 'Save History as Disk_File' is ticked.
    Any ideas?

    I have also seen this issue. Some of these issues were fixed by checking
    DNS. For data collection to work both forward and reverse DNS must work
    for the agent. If there is a mismatch or missing DNS it doesn't work.
    If there is a mismatch in DNS sometimes a re-discovery is required.
    Hi,
    I'm having problems with data collection on a
    number of servers.
    Essentially, I've configured data logging on a number
    of servers
    by creating a job in the 'Manage jobs' window, using
    the task type
    'data logging' and running it against a number of
    hosts.
    Unfortunately, when I look at the 'data
    collection' window via report
    manager, a number of host entries have an excamation
    mark attached
    which implies that data has not been collected. If I
    look at the attribute editor for one of the logged
    entries on an affected server, the history tab
    clearly states that the 'Save History as Disk_File'
    is ticked.
    Any ideas?

  • All Report Manager Report Name

    Hi All,
    Report manager has more than 5000 reports. I want to check which all reports are active and which all reports are inactive.
    From catalog table I can see report name but if it will be run once also in report manager then only it will show report name in catalog.
    Is there any table available on Report Server database from where we can see which all reports are available on Report Manager?
    Thanks & Regards,
    Khushi

    Hi Khushi,
    Based on my research, I find that the general properties of all the items (including Date Sources, Datasets and reports) on the Report Manager are stored in the Catalog table in ReportServer database. And it stores the current data refer to the Report Manager.
    If we have modify something (upload or delete some documents) on the Report Manager, it takes a synchronous update on the table. So the table is in sync with Report Manager.
    Different value in the Type column represent different type in the Report Manager. The type=2 represents Reports in the Report Manger. If we want to select all reports name in Report Manager, we can use the query below:
    use ReportServer
    select Name
    from dbo.Catalog
    where dbo.Catalog.Type=2
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Since Adobe Connect 9 hosted release missing filter date field in registration report tab

    Prior to the new version we use to do the below steps and get a Filter Reports option.  Now that option is missing.  Is there another way to pull this report?  Is this a bug and can be resolved?  Am I missing something?
    -Event Management
    -Shared Events
    -PREP Master 2011 1.0 (Name of our Main Folder)
    -Click on PREP Master (Cty.) 2011 1.0 (Name of on demand stored in main folder)
    --Reports
    -Filter Reports
    -Change Time, Later Time-One day behind time frame 12:00am start to 12:00am finished (Missing Date Filter)
    (Date should have remained the same from Training report, no need to filter date)
    -By Registrants (Attendance Report)(Missing Option/Replaced by Campaign Report)
    -Download Report Data
    If you go to the By Answers Tab you get the Filter Reports link.  If you go to pull Training reports you get the filter link.  But going to Event Management, locating the event, and then trying to pull a report on Registration does NOT give you filter reports like it use to.  We need this. 

    HI
    add that fileds in the all locations where you need it like
    in internal table declaration , write statement , select statement
    these are the main areas where you have to add that 2 fileds

  • Data Driven Subscription Missing in Reporting Services Manager under Subcriptions

    I am attempting to create my first data driven subscription.
    However, the 'New Data-driven Subscription'
    button is missing from my management view under Subscriptions for the report I am using.
    I have verified that I have the 'Content Manager' and 'System Administrator' roles associated with my login.  Also, I am running on the necessary Enterprise Edition.
    Microsoft SQL Server 2012 Enterprise Edition (64-bit) on Windows NT 6.2 
    Please assist me in troubleshooting this matter as this is the only method I'm aware of for accessing data driven subscriptions.

    Hi ThornDrill,
    According to your description, the 'New Data-driven Subscription' button is missing though you install SQL Server Enterprise edition.
    In you scenario, it’s possible that you are running a different SKU of Report Server while the SQL Server is Enterprise edition. Please find the first log file within the Reporting Service logs, then search the keyword with “SKU” to find the actual edition
    of the report server instance. For more information, please refer to this similar thread:
    Data driven subscription button not displayed.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • 3.0 final- 2.1 EA1: Delete Persistent Settings missing in Data tab

    Hi,
    This cool new feature in the worksheet's result set seems to be missing from the table/view's Data tab. Can this be added?
    Thanks,
    K.

    Ah, I see it in the context menu now, nice.
    However, as you state, if we'd ever run into an invalid query, we wouldn't be able to recover from it.
    FWIW, I did run into invalid Data tabs in previous versions, but didn't run into an invalid result set nor Data tab in 2.1 yet. Obviously you guys are fixing bugs in this area too.
    I did restore column order with the button.
    So IMHO, having the button on the Data tab's toolbar would be more consistent with the worksheet's result grid and would play safe if anything goes wrong, but maybe you guys think it gets cluttered.
    If you're not sure about the button, let's see if anyone runs into an invalid tab and reports it here...
    Thanks,
    K.

  • Can not see the report in report manager/admin tab

    Hi,
    in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
    Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
    Thank you.

    On the administration page, you will be able to see "View Reports For" header on the top.
    Under that header you will see the following fields:
    User ID/Type/Last/Status/Folder /Instance
    Above values will be used by PeopleSoft to filter and display the list of reports
    If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
    If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
    Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Maybe you are looking for

  • Bridge won't open. Tried many ways but none works. Any suggestions please

    Bridge won't open. Tried many ways but none works. Any suggestions please

  • Dreamweaver MX 2004 Update?

    I've tried to update my Dreamweaver MX 2004 - but everytime I start going through the install it says that Dreamweaver is not found within the Macromedia/Dreamweaver folder and therefore can't install. I've verified that the application is in that fo

  • Crossbow to Labview

    Hi everybody. I am trying to get the data from crossbow to labview. I am using Memsic WSN starters kit (MIB520 Gateway,MICA2 node, MTS400 sensor board ) and I am trying to get data from it into labview. I followed instructions from this webpage ht

  • SPAM Filter Issues for Email

    I don't understand how I can continue to get 20+ SPAM emails a day that the filter does not catch.  I even login and tag them as SPAM per the instructions.  I even forward the emails to "report SPAM" email alias, yet they keep on coming...same ones,

  • Flash slideshow working on a portion of the site

    I have created two photo slideshows to put on a site I'm working on. One  is on the home page and it seems to work fine. The second is on another  page. This one is not working for some reason. I published it in the  same way I did the first from Fla