Data table vanishing on reload

Hi,
I have in the jsp a table populated by arraylist. The bean used is request scope and cannot be kept as session scope. When I view the page for the first time the list comes properly. But subsequent operation on the same page the list doesnt appears. On subsequent opertaion I dont repopulate because I think jsf should do the same for me.
Could anyone help me on this?
Regards,
KP

I have seen similar behavior when nested collections are used to populate nested datatables and the bean had a scope of request. Outside those nested cases, I did not experience the behavior you are describing with request bean. I think it is a bug. Use session scope as a workaround. Unfortunately you will need to manually remove from session scope in case needed for performance reasons, ...etc

Similar Messages

DSO upload and no data in Active data table

Hi Experts,
I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
Pls advise.
Tati

Hi,
I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
Thanks,
Naren

Weird problem with mysql query and data table buttons !!!!

Hi,
I'm using jsc 2 update 1 on windows and mysql 4.1 . I have a page with a data table. One column of the data table contains "Details" buttons.
Source query for the table is :
SELECT tbl_tesserati.idtbl_tesserati idTesserato,
tbl_tesserati.num_tessera,
tbl_tesserati.nome,
tbl_societa.codice_meccanografico
FROM tbl_tesserati
INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
WHERE
tbl_tesserati.cognome LIKE ?
AND tbl_tesserati.nome LIKE ?
AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
AND tbl_tesserati.idtbl_tesserati LIKE ?
AND tbl_cariche.idtbl_cariche LIKE ?
AND tbl_qualifiche.idtbl_qualifiche LIKE ?
AND tbl_tesserati.data_nascita >= ?
AND tbl_tesserati.data_nascita<= ?
AND tbl_discipline.idtbl_discipline LIKE ?
AND codice_affiliazione LIKE ?
AND tbl_societa.denominazione LIKE ?
AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
The tbl_tesserati.data_nascita is a mysql date field.
The click event handler code for the "Details" Button is:
public String btnModificaTesserato_action() {
        try{
            TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");
            getRequestBean1().setId_tesserato((Long)rowData.getValue("idTesserato"));
        } catch(Exception ex) {
            log("errore nella query",ex);
        return "dettaglioTesseratoSocieta";
    }When i run the project and open the page the table is correctly rendered and populated with some rows. But when i click on details button nothing happens, the page is simply reloaded.
If i set a breakpoint in the code line TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");the debbuger does not stop the code execution ! As if the button was never clicked!
I tried to modify the source query to :
SELECT tbl_tesserati.idtbl_tesserati idTesserato,
tbl_tesserati.num_tessera,
tbl_tesserati.nome,
tbl_societa.codice_meccanografico
FROM tbl_tesserati
INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
WHERE
tbl_tesserati.cognome LIKE ?
AND tbl_tesserati.nome LIKE ?
AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
AND tbl_tesserati.idtbl_tesserati LIKE ?
AND tbl_cariche.idtbl_cariche LIKE ?
AND tbl_qualifiche.idtbl_qualifiche LIKE ?
AND tbl_tesserati.data_nascita >= ?
OR tbl_tesserati.data_nascita<= ?
AND tbl_discipline.idtbl_discipline LIKE ?
AND codice_affiliazione LIKE ?
AND tbl_societa.denominazione LIKE ?
AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
Using this query everything works well !! The click handler works and the debugger too !!
I changed only the AND in OR !!!
I also tried to change mysql-x-x-connector driver but without solving my problem.
Can someone help me ?
Thanks
Giorgio

You'll find that it is more to do with the way MySql deals with dates than anything else! Depending on how your date field is setup, then try using a BETWEEN statement for those 2 lines in your first query e.g.
AND ( tbl_tesserati.data_nascita BETWEEN ? AND ?)
The date column needs to be in the ISO format to work. If you examine your second query output, you might discover that the output is only going to refer to one parameter (probably the OR one). Did you manage to view the output logs from the application server? You would have got an idea from there with a message like stating a conversion error'.
Alternatively, you could try using the to_days() function and convert it directly to a number which would be a lot easier to deal with. For example:
AND to_days(tbl_tesserati.data_nascita >= ? )
AND to_days( tbl_tesserati.data_nascita<= ? )
Or try the BETWEEN version with to_days() and see what you get.
More info about date formatting (v5) here:
http://dev.mysql.com/doc/refman/5.0/en/date-and-time-functions.html#function_to-days
Before I forget, sometimes you may need to treat dates as Strings rather 'Long' as you did.
As a matter of interest, did you try your query in a different piece of software?
If my queries are a little more complicated, I tend to try MySql queries out in the free MySql query browser and also double check in another to verify certain issues. I found it easier to develop SQL in a seperate program then import the final version to JSC making the required modifications for parameters.
Message was edited by:
aerostra

Error while loading to active data table in DSO

Hi,
please help me in resolving the issue with active data table . when i am activating the new data table the job gets cancelled with message as 'Error when assigning SID: Action VAL_SID_CONVERT table OCALMONTH'.
Thanks and Regards,
Prasad.

Hi,
In the displaying error message tab of ODS activation, you will get error message and invalid value for the 0CALMONTH will be displayed. Search the NEW TABLE of ODS with the same value, identify the error records.
If you have PSA in the flow, delete (w/o making the status RED), correct data in PSA and reconstruct the data.
If you don't have PSA, you have to delete by making red, reload through PSA correcting the erroneous data in PSA.
Regards
Chandu

Expand All and Collapse All with Data table

Hi Guys,
     I have a data table as shown in code pasted . where the first and second column have row category which gives a categorization with a twisty.
     When i click on the twisty or item name the level beneath it expands. Eerything works fine.. but i need to have to links     Expand All and Collapse All which when clicked open the entire hierarchy or collapse it. Can anyone suggest a way of doing. Can it be done using javascript, I am not comfortable with java script .If someone has done this before please share the piece of code.Also please suggest the different ways of doing it. I am using RAD 7 and IBM JSF components.
     <hx:dataTableEx border="0" cellpadding="2" cellspacing="0"
     columnClasses="columnClass1" headerClass="headerClass"
     footerClass="footerClass" rowClasses="rowClass1, rowClass2" binding="#{masterPublList.tablebindData}"
     id="tableEx1" styleClass="dataTableEx" value="#{masterPublList.lst_publication}" var="varlst_publication">
          <hx:columnEx id="columnEx3">
               <hx:panelRowCategory id="rowCategory2"
                    styleClass="panelRowCategory"
                    value="#{varlst_publication.publCategory}" collapsed="true">
               </hx:panelRowCategory>
          </hx:columnEx>
          <hx:columnEx id="columnEx2">
               <hx:panelRowCategory id="rowCategory1"
                    styleClass="panelRowCategory" value="#{varlst_publication.publSubCategory1}">
                    <h:outputText id="text5" styleClass="outputText"></h:outputText>
               </hx:panelRowCategory>
          </hx:columnEx>
          <hx:columnEx id="column1">
               <hx:outputLinkEx id="linkEx1" styleClass="outputLinkEx" value="#{varlst_publication.publUrl}" target="_blank">
                    <h:outputText id="text3" styleClass="outputText" value="#{varlst_publication.publName}"></h:outputText>
               </hx:outputLinkEx>
          </hx:columnEx>
          <hx:columnEx id="columnEx1">
               <h:selectManyCheckbox disabledClass="selectManyCheckbox_Disabled"
                    id="checkbox1" styleClass="selectManyCheckbox" value= "#{varlst_publication.publLang}">
                    <f:selectItems value= "#{masterPublList.lst_lang}"/>
               </h:selectManyCheckbox>
          </hx:columnEx>
     </hx:dataTableEx>
               Thanks in anticipation

Hi Naamkeek,
Per my understanding that you have added the Expand All and Collapse All button in an drill down report by adding the "Go to report" action, now you got the report always refresh and return to the first page, right?
I have tested on my local environment and can reproduce the issue, no matter whether to add two buttons or using the parameter to do the Expand All and Collapse All, it is always return to the first page.
Gernerally, SQL Server Reporting Services does a postback while clicking a expand/collapse icon. SSRS re-renders reports because it need to regenerate the pages to fit the defined width & Height. That is why SQL Server Reporting Services reloads
the whole report.
This is by design. And, currently, we are not able to turned it off.
I would suggest you submitting a wish at
http://connect.microsoft.com
If the service requests frequently, we may include it in the next release.
Appreciate your understanding, and if you have any more questions, please feel free to ask.
Regards
Vicky Liu

Deleted and adjusted the Master data table, sid table and text table

Deleted and adjusted the master data table, sid table and text table of an zinfoobject after removing and adding attributes to that zinfoobject and was trying to activate it and system was giving me messages that cannot activate infoobject something like this.
So, i deleted and adjusted the master data table, sid table and text table. Since then getting messages right after executing the query because in that query that infoobject is getting used.
So the messages i am getting is:
SID 9 for characteristic Zinfoobject could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
System error in program SAPLRRK0 and form MEGA_SORT_M_02-02- (see long text)
Please help me in fixing this whole thing.
Thanks
SAPBW

SAP BW,
After adjusting your Master Data IOBJ and deleting and reloading the data - run a change run to adjust the references to the SIDs and then see if your query runs - run program RSDDS_AGGREGATES_MAINTAIN from se38 and select your IOBJ in the next screen..
Arun
Assign points if useful
P.S I did notice that in your earlier post for the same topic - you have had 12 answers / suggestions Please maintain only one thread as previously suggested..
My 0.02
Message was edited by:
Arun Varadarajan

Why in SE16 we can not see New Data Table for standard DSO

Hi,
We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not see New Data Table of Standard DSO.
Regards,
Sushant

Hi Sushant,
It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
Sankar Kumar

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

A data table in one column of a dynamic data table

Hi , I have to design a dynamic data table(with dynamic columns and data) which looks as the following
DETAILS      NAME      ROLE NUMBER     CLASS     SECTION
15     MATHS     SURESH     15     10     A
20     SCIENCE
25     ENGLISH
15     MATHS     SURESH     15     10     A
20     SCIENCE
25     ENGLISH
The data in the column 'DETAILS' should have inner table. The data in this inner table should have hyper links. If there is no inner table infor mation there shold be an image with hyperlink. This data table should also have pagination and sorting features. Please send me some example code for this. Please help me out as i have client demo on monday

You may find this example useful: [http://balusc.blogspot.com/2006/06/using-datatables.html#NestingDatatables].
To toggle between a nested datatable and a hyperlink with image just use the rendered attribute. E.g.
    <h:column>
        <h:dataTable rendered="#{!empty dataItem.innerList}">
        </h:dataTable>
        <h:commandLink rendered="#{empty dataItem.innerList}">
        </h:commandLink>
    </h:column>
...

DSO activation: Data in new data table but missing in active data table?

we use an end routine in transformation to populate a data field in DSO.
it works as we can see the value populated in new data table.
when we activate (activation) DSO, we see the value is deleted from this data field.
why?
this data field is set as an characteristic info obj in the data field portion of the DSO.
we are using 2004s, I forget to check the SP level.
George

good job ,thanks for the update and good luck.
I saw it late on this, else i never miss OSS notes
Chetan
@CP..

How to get list data and bind to data table or Grid view in share point 2010 using j query

hi,
How to bind list data in to data table or grid view using Sp Services.
How to use sp services in share point 2010 lists and document library

Hi, You can use List service, SPServices and JQuery to get your requiement done-
See here for an sample implementation -
http://sympmarc.com/2013/02/26/spservices-stories-10-jqgrid-implementation-using-spservices-in-sharepoint/
http://www.codeproject.com/Articles/343934/jqGrid-Implementation-using-SpServices-in-SharePoi
Mark (creator of SPServices) has some good documentation on how to use SPServices-
http://spservices.codeplex.com/wikipage?title=%24().SPServices
SPServices Stories #7 – Example Uses of SPServices, JavaScript and SharePoint
http://sympmarc.com/2013/02/15/spservices-stories-7-example-uses-of-spservices-javascript-and-sharepoint/
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Data not going from active data table to new data table -DSO activation iss

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha

Abap code not working - deleting based on master data table information

Hi,
I wrote a piece of code earlier which is working and during test we found out that it will be hard for the support guys to maintain because it was hard coded and there is possibility that users will include more code nums in the future
sample code
DELETE it_source WHERE /M/SOURCE EQ 'USA' AND
/M/CODENUM NE '0999' AND
/MCODENUM NE '0888' AND.
Now I created a new InfoObject master data so that the support people can maintain the source and code number manually.
master data table - the codenum is the key.
XCODENUM    XSOURCE
0999               IND01
0888               IND01
now I wrote this routine all the data gets deleted.
tables /M/PGICTABLE.
Data tab like /M/PGICTABLE occurs 0 with header line.
Select * from /M/PGICTABLE into table tab where objvers = 'A'.
if sy-subrc = 0.
LOOP at tab.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM NE tab-XCODENUM.
ENDLOOP.
Endif.
But when I chage the sign to EQ, I get opposite values , Not what I require.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM EQ tab-XCODENUM.
Cube table that I want to extract from
/M/SOURCE                             /M/CODENUM
IND01                                       0999
IND01                                       0888
IND01                                       0555
IND01                                       0444
FRF01                                      0111
I want to only the rows where the /M/CODENUM = 0999 and 0888 and i would also need FRF101
and the rows in bold should be deleted.
thanks
Edited by: Bhat Vaidya on Jun 17, 2010 12:38 PM

It's obvious why it deletes all the records. Debug & get your answer i wont spoon feed
Anyways on to achieve your requirement try this code:
DATA:
      r_srce TYPE RANGE OF char5, "Range Table for Source
      s_srce LIKE LINE OF r_srce,
      r_code TYPE RANGE OF numc04,"Range table for Code
      s_code LIKE LINE OF r_code.
s_srce-sign = s_code-sign = 'I'.
s_srce-option = s_code-option = 'EQ'.
* Populate the range tables using /M/PGICTABLE
LOOP AT itab INTO wa.
s_code-low = wa1-code.
s_srce-low = wa1-srce.
APPEND: s_code TO r_code,
          s_srce TO r_srce.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM:
r_code COMPARING ALL FIELDS,
r_srce COMPARING ALL FIELDS.
* Delete from Cube
DELETE it_source WHERE srce IN r_srce AND code IN r_code.

Getting selected values from a data table

My data table gets values directly from a result set.
I went through http://balusc.blogspot.com/2006/06/using-datatables.html#top ,
however, the data table shown in this example takes values from a simple list. I have trouble in getting selected values.
Can anyone suggest how to select multiple values. here is a small code sample of what I have
SessionBean
ResultSet rs= db.retrieve_draft();
datamodel = new ResultSetDataModel();
datamodel.setWrappedData(rs);This is the JSF
<h:dataTable binding="#{Engineer.dataTable1}" headerClass="list-header" id="dataTable1"
rowClasses="list-row-even,list-row-odd" style="left: 144px; top: 192px; position: absolute"
value="#{SessionBean1.datamodel}" var="currentRow">
<h:column id="column1">
<h:outputText id="outputText77" value="#{currentRow['report_number']}"/>
<f:facet name="header">
<h:outputText id="outputText78" value="Report Number"/>
</f:facet>
</h:column>Edited by: ktip on Jul 29, 2008 11:04 AM

Here is what I was doing :
This is my Session Bean (viz. SessionBean1)
private CachedRowSetDataProvider draft_infoDataProvider;
    private CachedRowSetXImpl draft_RowSet;
    public CachedRowSetDataProvider getDraft_info() {
        return draft_infoDataProvider;
    public void setDraft_info(CachedRowSetDataProvider draft_info) {
        this.draft_info = draft_infoDataProvider;
    public CachedRowSetXImpl getDraft_RowSet() {
        return draft_RowSet;
    public void setDraft_row(CachedRowSetXImpl draft_row) {
        this.draft_row = draft_RowSet;
public void get_drafts()
            Class.forName("com.mysql.jdbc.Driver");
            String url = "jdbc:mysql://localhost:3308/test";
            String dbUser = "root";
            String dbPassword = "adminadmin";
            con = DriverManager.getConnection(url, dbUser, dbPassword);
        String sql="SELECT report_id from reports WHERE status='Draft' ";
        ResultSet rs=null;
        try
            Statement stmt1=con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
            rs=stmt1.executeQuery(sql);
            draft_RowSet=new CachedRowSetXImpl();
            draft_RowSet.populate(rs);
            draft_infoDataProvider=new CachedRowSetDataProvider(draft_RowSet);
            result="ok";
        catch(SQLException e)
          System.out.println(e);
          result="fail";
Here is my jsp page (developed in Netbeans 6.1) showing the data table
<webuijsf:table augmentTitle="false" binding="#{Engineer.table1}" clearSortButton="true" deselectMultipleButton="true"
                                        id="table1" selectMultipleButton="true" sortPanelToggleButton="true"
                                        style="left: 48px; top: 144px; position: absolute; width: 450px" title="Table" width="0">
         <webuijsf:tableRowGroup id="tableRowGroup1" rows="10" sourceData="#{SessionBean1.draft_infoDataProvider}" sourceVar="currentRow">
                  <webuijsf:tableColumn headerText="report_number" id="tableColumn1" sort="test_report.report_number">
                                        <webuijsf:staticText id="staticText1" text="#{currentRow.value['reports.report_id]}"/>
                    </webuijsf:tableColumn>
         </webuijsf:tableRowGroup>
   </webuijsf:table>Doing all this just resulted in a javax.Naming.Exception : Data Source is null
I tested this piece of code to give me the number of rows in the underlying rowset and it worked well. But somehow I could not get to display the data. Am I missing something?
Edited by: ktip on Jul 31, 2008 1:21 PM

Problem with Exception Worksheet using Data from Supply Plan Data Table

I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
I'm using Demantra version 7.2. Thanks for any help!
Edited by: user9253208 on Mar 30, 2010 6:40 AM

Thanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.

Data table vanishing on reload

Similar Messages

Maybe you are looking for