Data Target CACHE not known in APD

Dear All,
I have created CRM extension thru EEWB and also i have created necessary query at BW side. Now when i try to create Analysis Process thru APD, i am not able to add my Analytical Data Storage wat i have created in CRM thru EEWB.
It is giving "CRM error: Data target CACHE;ZSBP not known" where ZSBP is my ADS created on CRM.
Is this some authorization issue or wat? Plz suggest.
Regards,
SS.

The same question in data source is not appeared in the Infopackage.

Similar Messages

CRM error: Data target BPMKT; not known

Hi,
I m working on Loyalty Points Mgmt. which is combination of CRM & BW. I have created a Analysis Process Designer (RSANWB) Here source is Query & Target is CRM Attributes, In CRM attributes I have selected Data Target : BPMKT "Marketing attributes for business partner segmentation". When I am going to active this the system shows "CRM error : Data target BPMKT not known".
Anyone could help me. Where I am wrong...? How could I correct this Error.
Thanx in Advance.
Regards
Manoj Kulkarni

Hi Rogier, I got same problem.
How to resolved it?
Regards.
Enrique.

The data target is not appeared in the Infopackage under datatagets tab.

Hi thanks for your response, i eloboreted my problem below pl see,
In the Info Cube structure i check the Trassactinal check box, In the Infopackage level under the data targets tab i selected the 'Select data targets' radio button icon but the data target is not appeared in the table.pl give me a suggetion in which location can i make a change.
Thanks & Regards
Bhaskar

The same question in data source is not appeared in the Infopackage.

List of data targets is not visible during data upload

Hi all,
I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
thanks in advance
regards,
a.fahrudeen
Message was edited by:
FAHRUDEEN MUSTAFA

Hi Fahrudeen,
Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
Regards
Manick

Data Targets does not show up despite having Active Update Rule

Hi mates,
I have an Info Cube of which I have created an Update Rule from a Active Info Source.
However, when I created the Info Package, the 'Data Targets' tab does NOT seem to show the Info Cube as part of the Data Target
Please advice

hello John;
check if this is a Basic cube or Transactional cube. If for some reasons this has been created as a transactional cube then you won't be able to see the cube on the InfoPackage because you theoritically you won't be loading data into the transactional cubes.
let us know the details.
Regards:
BK

PSA request updated to data targets but not showing

Hi All,
It must be a basic question for BW support activities. However appreciate if someone can help me out as I am unable to find similar post.
In PSA the request shows it successfully updated to a data target but I can't see the delta request in the data target (Cube)- Manage.
This is a delta request. Can someone tell me how do I load the data back in to the cube? Do I need to delete the request from cube and run it again but I guess the deltas will be lost.
Help. pls give me all the steps in detail how do I fix this.
Thanks,
B

Hi,
There are two options.
1. at PSA find how many records are exist for your request.
Note/down load the records into excel if you have countable. As my guess delta records might be less.
Later thru repair full request you can load to PSA and then to target.
AT repair full request we need to use proper selections to load required records only.
2. PSA Request must be stored at back end table.
in that table if we can change update further status then we can do the psa request to target thru delta dtp.
Thanks

Data target is not available when creating an info package in BW

Hi,
I am not sure how, but I have accidentally deleted the info packages for one of the info sources. I have created init package successfully, but when I try to create a delta info package for the data mart, the data target( which is an info cube) is not appearing in the data target tab.
Any help in this issue is higly appreciated.
Thanks
Prashant

PRASHANT ASOPA , did you find a solution to this - I am facing a similar situation! I have tried almost everything including deleting and recreating the update rule, recreating the export datasource, activating everything a couple of times and of course cretaing and deleting info packages, but no matter what I do I can't get the system to recognize the data target.
The "funny" thing is that everywhere else, even in the "Show data flow" everything looks right!

Updating record that exist in master data target but not master data sourc

HI,
I have PLANT key value "0004" that exist in my master data target ZPLANT, but this value has never sended by my source system, it was added only when I loaded my Infoprovider.
My problem is that this key value "0004" haven't text, and I would like put automatiquely the text of another value '0005' for this value '0004'.
I'm in BI7 for information.
Do you have any idea please? ABAP, Start routine or End routine?
Andcould you give me please the ABAP code to do that?
Radj.

Thank you for your answer, but the source system doesn't contain the value '0004'.
Can'I add this value while loading ZPLANT master data from source system?
If yes, How can'I do it, and How can I maitain (automatiquely not manually) the text of '0004' key value?
PS:
The text of '0004' key value is the same as the text of '0005' key value'.
Thank you.
Radj.
Edited by: Radjech Radjech on Jul 26, 2009 8:53 AM

How to see target groups in Data Target in the APD

Hi everybody.
I am trying to make a marketing segmentation of customers in the APD (BI) and I need to send the results to a target group in CRM, my problem is that I can´t see target groups in the u201CData Target CRMu201D.
I select the Logical System and when I select the Data Target the system shows CRM error: Data target TARGET_GROUP_FROM_B not known.
I know that the communication is OK, the RFC is working cause I can see Marketing Attributes (I released data target for replication and maintained attributes) but I don´t know if I need to do something similar with Target Groups of CRM or how.
Does anyone have an idea how can I see target groups in the window of the Data Target?
Thanks.

Hello,
I have seen this problem in other systems and it was caused by a GUI bug. Can you please check that you have the latest GUI patch installed for your GUI release.
Best Regards,
Des

Data is not updating in data target from PSA

Hi,
i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..

hi bwusr,
direct update, so it's master data,
is it attribute or text ? perhaps there's invalid character or lower case,
check in monitor tab detail.
and when you said not updated to data target,
you check by right click 'maintain master data' ?
or you mean it's not updated to reporting ?
execute change run ? rsa1->tools->apply attribute/hierarchy change.
hope this helps.

Data target 'XYZ' removed from list of loadable targets; not loadable

Hi Guys,
I am trying to run one of the infopakcage. When i open the IP i get this error (red) message "Data target 'XYZ' removed from list of loadable targets; not loadable".
I tired deleting and re-creating the IP but still get the same message. I checked the data target "XYZ" but could not find in the system. It does not exists.
This is not just a warning but an error which does not allow me to schedule the IP. I checked many forumns on this topic but did not get solution for this. I saw some of the OSS notes on other similar foroums but those not applicable.
I would appreciate if anyone could provide me the right solution for this.
Thanks,
Manmit

Manmit90
The XYZ data target has not been part of initilization but this is connected to the datasource. since the data target has been deleted now, system is throwing you an error that "Data target 'XYZ' removed from list of loadable targets; not loadable."
Old init is corrupted now. you will have to try a fresh one.
Before running the re-init, run the delta's and make sure that no the RSA7 is emptied for this datasource.
There will not be any problem with the re-init, it's just that you are trying to modify the data target selections.
The re-init will load delta data to only those targets that you choose now.
Regards,
Sudheer.

Using PC data targets not get updated...

Hai murali/friends...
now in my daily running process chain i have one error . i.e. in that if i use transaction rspcm the daily running chain is showing yellow colour...not showing in green colour and then i have displayed , display varient and then it shows one execute info package as yelloow colour i tried to right click on that and i displayed display messages and then it shows
"INFORMATION WAS STORED IN SOURCE SYSTEM"
to avoid this i mean i need to get data succefully updated but instead of this am getting above messages and my data targets also not updated succefully ...what will be the solution??? and in PSA data is available.....
help me friends.... last day onwards am trying to solve this issue but i can not......

thnak you very much sreekanth....
but while trying to load manually .. it is saying that already already data is there in delta... we cant not process this request...
like that am getting ... am totally ... confused sreekanth... in other messages am getting
There is a discrepancy between the confirmation and deletion of qRFC-LUWs
Message no. RSQU016
Diagnosis
When data was confirmed and deleted in the qRFC queue, the system found a discrepancy between the number of newly confirmed LUWs ( 2282) and the number of LUWs to be deleted ( 3424).
Where more LUWs are to be deleted than were previously confirmed, a previous delete attempt was terminated.
The LUWs were confirmed but not completely deleted from the qRFC and tRFC tables. The confirmation already ensures that the data is not transferred into the BW again with a subsequent request.
Delta extraction was continued.
Procedure
You do not need to do anything urgently.
If the message also arises during all subsequent delta requests, contact SAP Support with the message number at hand. In this case, there is a danger that the qRFC and tRFC tables run at full capacity, which may also affect other applications.

Authorization issue with report on "Char data target"

Hi,
we've a characteristic ZCHAR inserted as data target.
user is not able to execute a report created on this "Characteristic data target".
error is as follows : "Error : You are not authorized to use ZCHAR".
Could some one advise how to resolve this issue & what authorizations need to be assigned to this user.
PS: same user has no problems running other reports created on infocube & ODS.
also, this characteristic data target is not "authorization relevant" in the info object definition.
appreciate your help.
I've following profile assigned to user.
S_RS_ICUBE - Administrator Workbench - InfoCube
Activity : All activities
InfoCube Subobject : All values
InfoArea : *
InfoCube : *
Hari Immadi
http://immadi.com
SEM BW Analyst

Gova,
thanks for your reply.
profile doesn't have any authorization object S_RS_IOBJ.
looks like this is the problem.
I quickly tested with this object on a dummy profile & it worked with following settings. Is this correct just for reporting?
Object S_RS_IOBJ
Activity Display
InfoObject ZCHAR
InfoObject catalog *
Subobject of InfoObject Data
Hari Immadi
http://immadi.com
SEM BW Analyst

InfoPackage don't update Data Target

I Have a general problem that InfoPacjage didn't update any data target especially InfoCube
I am using the Data Flow 3X
When I am using DTP instead I succesfuly update data target
I need to know why InfoPackage didn't update data target?
Edited by: Mohamed Anas on May 29, 2011 9:36 PM

hi Mohamed,
Make sure your infopackage data target is not PSA only, there are multiple selection like PSA, Direct to Data Target.. sequencially and paralller. If that is not the issue, is your datasource emmulated DS? or it is 3.X? make sure you use the correct datasource type.. you can change that in rsds tc. Still that is not the issue, then tell us if you are getting any error? is it specific to one datasource or to others as well? try to do it in background instead of dialog. Hope that helps.
thanks.
Wond

APD and Data Target in CRM

Hi,
I have created ADS in CRM through EEWB with BI info objects.
Now I want to load this ADS table through APD from BI to CRM.
for that I am creating APD in BI with category as general.
I have selected data target as CRM
In that I am giving the appropriate logical system .
In the second dropdown which is for Data Targets : Here I am not getting ADS ( Analytica Data Source ) as my Data Target.
In CRM table BWTARGETS it is there with all attributes.
Also in CRM SPRO the data Target is Available with name as CACHE.
Path in SPRO : SPRO -> Integration with other mysap components -> Data Transfer from SAP Business Information Warehouse -> Define ID for data target adapters.
Let me know what I am missing in above process to get data target ADS in APD design ?

Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves...

Data Target CACHE not known in APD

Similar Messages

Maybe you are looking for