Data target error when opening InfoPackage (not loadable)

Hi,
I have transported my objects from the development environment to QA environment, but now when I try to open one specific InfoPackage (in QA) to schedule a data load to an DSO, I receive the following error:
Data target 'P_USUARIO ' removed from list of loadable targets; not loadable RSM 33
Data target 'P_USUARIO ' is not active or is incorrect; no loading allowed RSM 36
I tried to run RS_TRANSTRU_ACTIVATE_ALL program before realizing that it is not relevant in NW04s and I tried to transport many times again this specific data target with no success.
Any suggestion??
Thanks in advance.
Raphael

Hi:
The program you ran is for Transfer Structure.
The error you are gettign is for an Inactive Update Rule.
If the infopackage is loading several data targets and an update rule is inactive, then, you have take off laoding to that Update Rule in Infopackage.
First, see which Update Rule is Inactive. Look in all the tabs of infopackage and you will find it.
Ram C.

Similar Messages

Error when open Infopackage

Dear Gurus
When i double click to open an infopackage that attached to flat file source system i'm getting the following error
boldAn internal error occurred during the authorization check.
Message no. RSM894bold
If i open other infopackage within the same source system , i'm abale to open w/o any error
Please advice
thank you
BR

Su53 return no error
When i double click on the Infosource that this infopackage belong to , it return
InfoSource ZBWCH034 (Master Data) is not known
Message no. RSAR208
Please help
I can work with this object in DEV and QAS but after i transport to PRD this errors are coming up
Thank you
BR

Opening an Excel 2003 file in Office 2010 Universal Data Connection error when opening the file from a domain.

Hi.
One of my users are having problem with old accounting files in Excel 2003 when opening Excel 2010.
The user experience that linked information is not being updated properly.
And suspects that it something do with Universal Data Connection .
How can an Excel 2003 spread sheet be converted to Excel 2010 spread sheet and still contain active links?
When the user is opening and converting the file as mention in your suggestion, on the common share on a common domain, the links "breaks".
we are not using SharePoint on our domain.
But when doing it on a local machine, the links does not "breaks".
Looking forward to get solved to this problem.
Thank you in advance.
Rgds

it sounds link, the links changed from relative paths to absolute path. You need to use absolute path in original file.
KR

Data target 'XYZ' removed from list of loadable targets; not loadable

Hi Guys,
I am trying to run one of the infopakcage. When i open the IP i get this error (red) message "Data target 'XYZ' removed from list of loadable targets; not loadable".
I tired deleting and re-creating the IP but still get the same message. I checked the data target "XYZ" but could not find in the system. It does not exists.
This is not just a warning but an error which does not allow me to schedule the IP. I checked many forumns on this topic but did not get solution for this. I saw some of the OSS notes on other similar foroums but those not applicable.
I would appreciate if anyone could provide me the right solution for this.
Thanks,
Manmit

Manmit90
The XYZ data target has not been part of initilization but this is connected to the datasource. since the data target has been deleted now, system is throwing you an error that "Data target 'XYZ' removed from list of loadable targets; not loadable."
Old init is corrupted now. you will have to try a fresh one.
Before running the re-init, run the delta's and make sure that no the RSA7 is emptied for this datasource.
There will not be any problem with the re-init, it's just that you are trying to modify the data target selections.
The re-init will load delta data to only those targets that you choose now.
Regards,
Sudheer.

Data target '0BBP_PO' removed from list of loadable targets; not loadable

We have implemented the Business Content for Logistics and when we run the InfoPackage (IP) we have this message : Data target '0BBP_PO' removed from list of loadable targets; not loadable. We have Support Package 19 of BI 7.04 . The Data Target 0BBP_PO is not among the Data Targets of the IP, of course and none in the BW but why the IP takes it into account.
Many Thanks
Best Regards
Amadeus

Hi,
This should solve your problem
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925304
Also check this thread
'ODS' removed from list of loadable targets
Thanks and regards,
Srinath.

WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection

Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas Chang

Gosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang,

Data target 'ZGPPCAOD' removed from list of loadable targets; not loadable

Hi Friends,
I deleted some info providers and now I'm receiving messages when I try to start an info package´that had deleted info providers as data targets.
RSM033:
Data target 'ZGPPCAOD' removed from list of loadable targets; not loadable
RSM036:
Data taget 'ZGPPCAOD' is not active or incorrect; No loading allowed
How to get rid of these messages?
The problem is, that when I try to add those info packages to
process cnains no default processes like deleting and generating indices are provided.
Any ideas?
Thanks in advance
Joe

Hi,
this should solve your issue: https://websmp103.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=925304&_NLANG=EN
regards
Siggi

I am getting an error when opening the organizer saying online services could not be initialized?

I just installed photoshop elements 11 on my Mac and am receiving an error when opening the organizer. It is stating that online services could not be initialized and that I need to reinstall. I tried that and it is still coming up. What do I do?

How did you uninstall it?

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Javascript error when opening CS3 on pc..?

I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
'JavaScript Error'
'Error Number 45'
'Error string :Object is Invalid'
'Line 387'
also
'JavaScript Error'
'Error Number 45'
'Error String; Object is Invalid'
'Line 428'
there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
Anyone help?

hi
thanks for all the helpful info
i tried to reinstall INDESIGN only... didnt work same problem.
i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
thanks again
Date: Sat, 2 Jan 2010 09:50:57 -0700
From: [email protected]
To: [email protected]
Subject: Javascript error when opening CS3 on pc..?
I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
Peter
>

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

APEX bug:9879227 (ORA-01403: no data found error when using validations)

Hi,
We are getting the
ORA-01403: no data found error
when the APEX page has validations AND a tabular form is also present on the page.
I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ).
But what i want to get a confirmation on is, in which release was this bug really fixed ?
i see the release notes of 4.0.1.00.03 claiming that it is fixed
in the release.
we are on 4.0.1.00.03. is this bug really solved in release 4.0.1.00.03?
are there any known work-arounds ? i tried re-creating the report multiple times, but that did not help.
Any suggestions or work-arounds will greatly help us.
Regards,
Ramakrishnan

Ramakrishnan,
If you are talking about getting no data found when trying to save the report then take a look at the last message in this thread:
{message:id=9971445}
Cheers,
Tyson Jouglet

Data target error when opening InfoPackage (not loadable)

Similar Messages

Maybe you are looking for