Data target for 0EC_PCA_3

Hi,
On checking the Business Content I found that there seems to be no Data target for infosource : 0EC_PCA_3.
Also it seems to be listed under 3.5 infosources in BI7.0.
Any idea on which data target is to be used for 0EC_PCA_3 ?
Thanks in advance,
Regards
Govind.

Hello Govind,
Please check this:
http://help.sap.com/saphelp_nw04/helpdata/en/40/7a914026489920e10000000a1550b0/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/BBLibrary/HTML/ProfitCenterAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B54_BB_ConfigGuide_EN_DE.doc
Regarding your question:
The Data Target for 0EC_PCA_3 is 0PCA_C01.
Regards,
Jorge Diogo

Similar Messages

  • Standard Business Content & Data Targets for Case Management & CRM Survey

    Dear Friends,
    We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following:
    1. Case Management
    2. CRM Survey (We have already been able to identify Data targets in BW3.5 for Web Survey & in CRM 2007 we have been able to identify Data targets for CRM Survey, as well as Web Survey. Our requirement is identifying Data Target for CRM Survey)
    Please guide.
    Regards,
    Rajesh Banka

    hi,
    You can find the planning scenarios related to planning ifor CRM at this link http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
    You can also find the details on demo content for the same at http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
    Regards,
    Deepti

  • What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

    Hi,
    I am looking at help.sap.com but not able to find out the data flow from these two datasources.
    0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
    What are the data targets and further flow for these data sources?
    Thanks,
    Akshara

    Hi,
    Data source  - 0EC_PCA_1 and cube - 0PCA_C01
    Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
    you can use same cube for two data sources.
    Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
    Thanks

  • Data Target for info source 0EC_PCA_3 (Profit Centre Line Items)

    I have brought info source 0EC_PCA_3 into my system from Business Content (Profit Centre Line Items) but I'm unable to find any update rules or the target for this info source?
    Many thanks for your help.
    Matt

    Have you collected the object properly. I am please take the mentioned datasource and collect the object with dataflow before and afterwords in t-code RSORBCT. Cross check the collection for infocube, TR and UR and then start installation.
    Regards
    Pankaj

  • Error "cannot load request real time data targets" for new cube in BI 7.

    Hi All,
    WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
    I am using BI 7.0 for first time and ahve the following issue:
    I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets". 
    I checked cube type in setting in infcune is shows as Standard.  When I doube clicked on error the following message showed up
    You are trying to load data into a real-time InfoCube using a DTP.
    This is only possible if the correct load settings have been defined for the InfoCube.
    Procedure
    In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
    I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
    Thanks
    KV

    Hi Kverma,
    Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
    Real Time data Target can be loaded With Data; Planning not allowed &
    Real Time data Target can be Planned; Data loading not allowed
    You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
    Regards,
    Kams

  • Data source and data target for p.o condition records

    Hi All,
    can any one help me what is the data source for p.o and shedule line  condition records and their data target
    Thanks
    sivakumar R

    hi sri,
    to pick up the condition records from the table table konv with respect to the p.o no  and also schedule line with condition values from table A016 any data souce and any data target are available in standard.
    pl help on this
    Thanks
    sivakumar R
    Edited by: Siva Kumar on Feb 19, 2010 10:22 AM

  • Data Target for TCURR

    Hi All,
    I have a requirement where i need to extract TCURR to a flat file using Open Hub. As Open Hub does not support tables in BW, I think the only option available is to generate a data source for the table TCURR in R/3. I'm not available to find the suitable InfoObjects for these fields.
    The fields and the respective data types are:
    Field                   Data Type
    KURST              CHAR
    FCURR              CUKY
    TCURR               CUKY
    GDATU             CHAR
    UKURS             DEC
    FFACT              DEC
    TFACT              DEC
    Please Help.

    Hello,
    If TCURR is in BW,then you can use APD.
    You can use TCURR as source table and save it as a CSV file.
    If TCURR table is in R/3 ,then you need to use tranfer global settings in RSA1 or run program RSIMPCUST program.
    Select Currencies and re-build option.

  • Procurement for Public Sector - PPS Data Targets

    Hello Everyone,
    I need to install new BI objects whci are related to SRM.
    There are total 7 data targets for "Procurement for Public Sector (PPS)" . They are,
    1. Purchasing Contracts - 0PSCTR_D1
    2. Shopping Cart - 0PSSC_D1
    3. Purchase Order History - 0PSPS_D1
    4. Purchase Order Accounting - 0PSPAC_D1
    5. RFx Responses - Single Documents (Quotations) - 0PSBID_D1
    6. RFx - Single Documents - 0PSBIN_D1
    7. Public Sector PO History - 0PPS_PO_C
    I got the data modelling documentation for this objects, but no documentation for queries and even data modelling documentation is not complete and clear.
    Need your help in finding out the documentation for queries..
    Thanks in advance.
    Regards,
    Lasya.

    Hello Guys,
    I know very few people will work on this area, but it is purely a searching factor.. examples: how to search or queries which does not have documentation...
    need your inputs..
    Helping Information is in the below link:
    http://help.sap.com/saphelp_nw70/helpdata/en/0e/e3c3cbe5644bc1ae09d1b1cf5b1f77/frameset.htm
    Thanks,
    Lasya.

  • Creating InfoPackage: Data Targets not available for selection. Any hints?

    Hi,
    I have 5 ODSes which by design are to feed a 6th ODS. I created 5 update rules, using each of the 5 ODSes, separately as infosources.
    The problem is that under the Infosource tree, I see the system generated InfoSouce but while creating the Infopackage, under Data Targets tab, my 5 ODSes are not available. Infact, it gives me no data targets for selection.
    Any hints on what I might be missing in the steps?
    Thanks

    hi Amanda,
    say you have zods1 to zods6, and zods6 is feed by zods1-zods5,
    under infosource tree, you create infopackage from which ods's generated infosource ? i guess zods6,
    then yes you wont see any ods in data target, since zods6 has no further update to any data target,
    you will see zods6 in generated infosource of zods1,zods2,zods3,zods4,and zods5.
    you won't see all zods1-zods5 in one infosource unless they have update rules for all zods1-zods5 with same infosource.
    you will need to go one by one infosource for each ods's infosource.
    hope this helps.
    note : it seems recently you only reward 'solved' for the last reply, please note you can reward more than one star

  • Can not update request in data target

    Hi,
    We have a process chain for master data (10 parallel) loads.  One of the load
    failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
    When I checked the InfoPackage
    (a) update: full load
    (b) it has data selection
    (c) processing :PSA and then to data targets
    (d) Data targets: update in all data targets for which active rules exist.
    But I do not see any list of data targets here.
    Can some one please suggest me how do I correct this load failure.
    Thanks

    Hi Wondewossen, NS and Nagesh,
    Thanks for the information. I am in support, and the developer is
    not here now.
    I have checked Header tab in the monitor, in this there
    is a update symbol and infosource name and an -->
    but after arrow there is nothing.
    when I click on this I get a message
    "No active update rules exist".
    Can you please advice me how to I correct this.
    Thanks

  • APD Analysis Process Designer - CRM Data Target

    Hi,
    I have now defined the DataTarget and by "Release data target for Replication from SAP BW" I get the error:
    <b>Error when processing function module /SVC/OBJ_F4_<MyDataTarget></b>
    what does it mean and how can I solve this situation?
    Thanks
    FedeX

    Hi!
    in case if you are not able to find the docu...here is the docu helop for the function group...
    "The function group CRMBW_ADAPTERS combines function modules that are necessary for implementing a data target adapter as part of the data upload from SAP BW. You can use the function modules delivered by SAP as a template for new adapters (for example, you can copy them).
    The function modules contained in this function group are divided into the following areas on the basis of their naming convention:
    o     Function modules for defining data targets
    -     CRMBW_OBJ_F4_*
    -     CRMBW_DET_F4_*
    -     CRMBW_CHECK_*
    o     Function modules for designing the analysis process
    -     CRMBW_LIST_*
    -     CRMBW_DETAIL_*
    o     Function modules for the data upload
    -     CRMBW_UPDATE_*
    The placeholder * stands for a data target adapter defined in the IMG activity .
    The corresponding adapter modules are called up dynamically during runtime at the appropriate points in the program, using the name of the data target adapter and applying the following program logic:
    CONCATENATE l_namespace l_nameconvention
      l_function l_target INTO l_funcname.
    TRY.
      CALL FUNCTION l_funcname
        EXPORTING
        IMPORTING
        TABLES
      CATCH cx_root.
        l_msgv1 = l_funcname.
        CALL FUNCTION 'BALW_BAPIRETURN_GET2'
          EXPORTING
            type   = 'E'
            cl     = 'CRMBW_ATTR_WRITE'
            number = '005'
            par1   = l_msgv1
          IMPORTING
            return = ls_return.
        APPEND ls_return TO et_return.
    ENDTRY.
    Consequently, if a function module does not exist or errors occurred when calling it up, a runtime error is not issued directly. Instead, the error is returned as a message in the return table for the instance calling up the function module.
    If you want to create customer-specific data target adapters, observe the following:
    o     Define the ID for the data target adapter in the IMG activity . Ensure that your entry begins with the letter Y or Z to avoid any naming conflicts with subsequent SAP enhancements.
    o     In this function group, implement adapter modules that begin with the namespace stored in the IMG activity mentioned above and with the naming convention, and that also fulfil the naming convention listed under Integration. In this way, you ensure that there are no naming conflicts with subsequent SAP deliveries.
    o     To provide the data upload with full support, implement all six adapter modules.
    With the following entry in the IMG activity , implement the function modules listed below.
    Data Target Adapter     Namespace     Naming Convention
    ZTARGET     /COMPANY/     MYLOAD_
    Function Modules
    /COMPANY/MYLOAD_OBJ_F4_ZTARGET
    /COMPANY/MYLOAD_DET_F4_ZTARGET
    /COMPANY/MYLOAD_CHECK_ZTARGET
    /COMPANY/MYLOAD_LIST_ZTARGET
    /COMPANY/MYLOAD_DETAIL_ZTARGET
    /COMPANY/MYLOAD_UPDATE_ZTARGET
    with regards
    ashwin

  • How to see target groups in Data Target in the APD

    Hi everybody.
    I am trying to make a marketing segmentation of customers in the APD (BI) and I need to send the results to a target group in CRM, my problem is that I can´t see target groups in the u201CData Target CRMu201D.
    I select the Logical System and when I select the Data Target the system shows   CRM error: Data target TARGET_GROUP_FROM_B not known.
    I know that the communication is OK, the RFC is working cause I can see Marketing Attributes (I released data target for replication and maintained attributes) but I don´t know if I need to do something similar with Target Groups of CRM or how.
    Does anyone have an idea how can I see target groups in the window of the Data Target?
    Thanks.

    Hello,
    I have seen  this problem in other systems and it was caused by a GUI bug. Can you please check that you have the latest GUI patch installed for your GUI  release.
    Best Regards,
    Des

  • What are Data sources for 0PUR_c10

    Hi ,
    Now iam activating BCT for 0PUR_c10 cube in BI 7.0
    before activating in BI side can i know
    1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
    2. plz tell me , what are master data info objects in BW side for MM data ?
    i will assign points .....
    Thank u
    PSR

    <i>
    1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?</i>
    PO delivery schedule lines are first consolidated in an ODS through data from the InfoSources Purchasing Data (Document Schedule Line Level) as of 2.0B (2LIS_02_SCL) and Offsetting Confirmation and Goods Receipt (2LIS_02_SGR).
    http://help.sap.com/saphelp_nw70/helpdata/en/bb/e99a3d35cf6f53e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/41/2b52e35f153014e10000000a114e5d/content.htm
    Do look for the dataflow/network diagram for 0PUR_C10 in Metadata Repository - you can find the BContent Flow.
    <i>2. plz tell me , what are master data info objects in BW side for MM data ?</i>
    Right click on ODS's & Cubes in MM - Infosource Overview - This will give the list of loadable data targets for associated Datatargets.
    Go to RSA5 search for the datasources.

  • Data loading for newly enhanced fields

    hi  friends
    we have a cube that updated with data daily for last one year.now we needed to add two fields to that data source .if we do so how can we  update data for those newly added fields in our data target for the previoue one year.
    Thanks  in  advance
      venkat.p

    HI,
    GOTO INfOPACKAGE screen ,select the two fields you want in the dataselection Tab you can give the values for those fields in the From Value and To Value, now goto update tab and choose initialize delta process  and schedule the dataload
    Hope this helps....

  • Targets for Datasources 0FI_GL_21 and 0FI_GL_20

    Hi All,
    Could you please tell me what are the Targets for the Datasources 0FI_GL_21 and 0FI_GL_20.
    Thanks in advance.
    Veerendra.

    hi,
    the data target for datsoure are:
    0FIGL_C20 : 0FIGL_C20 (G/L Accounts: Transaction Figures (Replicated))  standard cube
                             0FIGL_R20 (G/L Accounts: Transaction Figures (Direct))  virtual cube        
    0FI_GL_21:   Not able to find
    regards,
    mahesh

Maybe you are looking for