Data target problem

Hi,
I am learning BW now.
I am in an attempt of doing activation of Business content(area :personnel development-infosource (0HR_PA_PD_2),data source(0HR_PA_PD_2)),while doing I am getting the following error message;
"No data targets have yet been updated from this request
(It might be that no data targets have been defined or selected yet)
Do you really want to load data?".
If anyboday has the doc for the above problem please send me the doc to [email protected]
With Regards,
Jaheer

PL go step by step.
1. Activate the data targets
2. Activate the info sources.
3. Create ad activate the update rules.
4. Create the info package.
At this point, you have everything in BW. But you need to work on the source side to get the source.
Go to RSA5, activate the data sources, replicate them in BW, check the mappings in the info source, activate the info sourceand now you are set to load data.
Ravi Thothadri

Similar Messages

Problem for updating records in to data targets

Murali/sreenivas.
my processchain is working fine ..but upto Persistent Staging Area data is getting updated perfectly but after that daily i need to run
DTP manually , to avoid this what sholud i do??? i.e.
selecting particular info source and then Persistent Staging Area and then selecting particular request in PSA and selecting
update with scheduler.... by rightcliking on that... and then
after selecting this and then selecting immediate update...then Persistent Staging Area data is getting updated in to particular data targets...
i want to the data to be updated immediately once data is succefully reached Persistent Staging Area
Edited by: ganandkumar on Sep 13, 2010 7:15 AM
Edited by: ganandkumar on Sep 13, 2010 7:16 AM

Hi,
Are you using BW 3.5 or BI 7.0.
If you are in BW ,then please in the infopackage make the setting psa and data target in parallel.
If you are in BI 7.0,then include the step DTP.
Thanks,
Saveen Kumar

Delta Upload request from ODS is not including the Data target of planning

Hi,
I have a process chain in which there is a delta upload from ODS to 3 different data target. One of the data target is the planning cube. last 2days back i have changed the process chain schedule after was the Delta request is not hapenning for Planning cube. The process chain contains the changing the planning to load mode and load to planning mode. Every thing is working fine but the Delta is not happening for the Planning cube. Delta request are going correctly to the Other 2 data targets. Now it was like Delta has excluded the Planning cube. Another this there is nto planning package is appearing in the Infousources. and when I am trying to upload manually from ODS to Data targets it say that No delta is there. Please help me in this. This is a production problem. I have checked all the data monitors every thing is from but no delta is hapenning for the planning cube.
Thanks
Naveen.

Resolved

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Delta Update in data Target Must be Deactivated Before deleting the request

Hi Experts,
I got an error while deleting a request from an ODS target. In breaf Let me explain..
Today one data load got failed. The data source 0CRM_SALES_CONT_I ( CRM Sales Contract : Item ) is updating data to 4 ( Four ) ODS targets.
So I forcefully made the request red to delete the request from the targets. But I unfortunately deleted another request without making it RED, I reconstructed it. Everything is looking fine.
   But the thing is , when I tried to Delete the ERROR request from the other two related Data Targets ( 0CRM_CN2P and   0CRM_CNT1) , I fount these warnings..
                --> Request 140522 already retrieved by Data Target BWPCLNT600
                --> Delta update in Data Target BWPCLNT600 must be DEACT. before deleting the request.
                --> Do you want to DEACTIVATE the Delta Update in the Data Target BWPCLNT600   ?
   I clicked on YES.
I am having doubt, will it make any problem in future ? Or How Can I Resolve this problem   ?
Thanks,
Utpal.

Hi shanthi bhaskar ,
Thank you. But the client no which I have mentioned is not our. That is different, I have given for the example. Bur the DS and ODS name are as it is.
   and Shanthi, Won't be any problem as I got the warning as mentioned above.. ?
Thanks,
Utpal

How to see target groups in Data Target in the APD

Hi everybody.
I am trying to make a marketing segmentation of customers in the APD (BI) and I need to send the results to a target group in CRM, my problem is that I can´t see target groups in the u201CData Target CRMu201D.
I select the Logical System and when I select the Data Target the system shows CRM error: Data target TARGET_GROUP_FROM_B not known.
I know that the communication is OK, the RFC is working cause I can see Marketing Attributes (I released data target for replication and maintained attributes) but I don´t know if I need to do something similar with Target Groups of CRM or how.
Does anyone have an idea how can I see target groups in the window of the Data Target?
Thanks.

Hello,
I have seen this problem in other systems and it was caused by a GUI bug. Can you please check that you have the latest GUI patch installed for your GUI release.
Best Regards,
Des

Request status in Manage data targets

Hi
I have an ODS, which loads from a flat file. When I load data, during activation I am getting error on subsequent processing stage with status 5. What is interesting to me is, request is available for reporting icon is turned on, but I am seeing a status RED on Manage data targets. Even if I try to change manually the status to green as I am seeing the data, it didnot allow me. The error I am seeing on details tab of monitor is as shown below..
Activation of data records from ODS object ZQM_O55 terminated
System error occurred (RFC call)
Record mode Y unknown (data record REQU_3ZRQHGCF4GHOFNNP818446N3F/000001/150), activation failed
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Eventhough it says activationt terminated with errors, how it got the icon on request for reporting option on? How to correct this issue? What am I missing. when does the record mode Y record will be created? Any help would be highly appreciated.
Thanks
Pandiri

Hi!
I had a similar problem, check your file and ods definition, maybe it is not correct.... and before you load replicate datasource and re-activate the transfer rules.....
I hope this can help you.

List of data targets is not visible during data upload

Hi all,
I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
thanks in advance
regards,
a.fahrudeen
Message was edited by:
FAHRUDEEN MUSTAFA

Hi Fahrudeen,
Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
Regards
Manick

How to know which transformation code is using the data target..

Hi,
Say I have a DSO ZXXX. Now there are transformations for other data targets, where the ABAP code is doing a select on this DSO ZXXX and reading and using that data for the result package.
Typically if we wany to know if a DSO is used where where we try to do a 'display data flow' on that and find out. But that does not capture if that DSO is being read in the code.
So is there any way I can find it ?
Or do I have to manually go to each routines, start, end, mapping related routines etc and try to figure out ?
thnks

Dear sdnuser1,
The following link has a program to solve your problem.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ABAPprogramtofindBIlookupsandcodePatterns]
Hope this helps.
Rgds,
Guru

Authorization issue with report on "Char data target"

Hi,
we've a characteristic ZCHAR inserted as data target.
user is not able to execute a report created on this "Characteristic data target".
error is as follows : "Error : You are not authorized to use ZCHAR".
Could some one advise how to resolve this issue & what authorizations need to be assigned to this user.
PS: same user has no problems running other reports created on infocube & ODS.
also, this characteristic data target is not "authorization relevant" in the info object definition.
appreciate your help.
I've following profile assigned to user.
S_RS_ICUBE - Administrator Workbench - InfoCube
Activity : All activities
InfoCube Subobject : All values
InfoArea : *
InfoCube : *
Hari Immadi
http://immadi.com
SEM BW Analyst

Gova,
thanks for your reply.
profile doesn't have any authorization object S_RS_IOBJ.
looks like this is the problem.
I quickly tested with this object on a dummy profile & it worked with following settings. Is this correct just for reporting?
Object S_RS_IOBJ
Activity Display
InfoObject ZCHAR
InfoObject catalog *
Subobject of InfoObject Data
Hari Immadi
http://immadi.com
SEM BW Analyst

How to update DSO data in Data targets (ODS data into Data Targets)

Hi,
In 3.5 version we have a option Update ODS data in Data Targets
to Transfer Data From ODS to Info cube.
In 7.0 How to transfer DataStore Object data to Info Cube, I can't find
Update DSO data in Data Target option.
can any body Help me to solve this problem.
Thanks
prasanna

Hi prassna,
0RECORDMODE are auto generated infoobjects which are requried to be mapped if you are going for a delta update from your DSO otherwise you can proceed further without mapping the 0RECORDMODE and neglect the system generated warning
check this for the Creation of data targets
 In left panel select info provider
 Select created info area and right click to create ODS( Data store object ) or Cube.
 Specify name fro the ODS or cube and click create
 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
 Click Activate.
 Right click on ODS or Cube and select create transformation.
 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
 Activate created transformation
 Create Data transfer process (DTP) by right clicking the master data attributes
 In extraction tab specify extraction mode ( full)
 In update tab specify error handling ( request green)
 Activate DTP and in execute tab click execute button to load data in data targets.
cheers
Sunil

Data Mismatch problem in Production system

Dear Experts,
We have been encountering serious data mismatch problems with our source system since 29th Dec 2010.
We have realized this mismatch only on 11th Jan 2011. So, we have deleted entire data from 29th Dec 2010 onwards to 11th Jan 2011. Then we tried to load delta again as per our Process Chain sequence. Since then, our production system has become very inconsistent. We found that the entire data from 29th Dec 2010 to till date is started giving mismatch.
Our system got damaged in terms of data drastically. If I delete any bad requests from our Cubes & Data Store Objects, the next time when we try to load data, cube & Data Store Objects is showing the deleted request no. is not updated properly. Because of this, our Process chain is daily failing to complete and giving so many technical errors. We are totally confused to restore our data from 29th Dec 2010 to till date.
Can any one please help us to restore our data fully and Process Chain to run successfully...............?
Thanks in Advance,
Suman

Hi Suman,
I understood that you are using 3.x version of BW
such kind of issues occurs if you distrub the delta sequence by deleting the requests without making them red.
you can resolve this two ways......
1) Go to reconstruction tab of the DSO and CUBE, select all the req from 29th Dec 2010 thru 11th Jan 2011 and reconstruct them. once they appear in the request tab. make all the requests to red (set the QM status to RED) one by one and delete them from the CUBE and DSO.
This should set the delta status back to 29th and you will be able to run a repeat delta from then in your next delta.
2) Go to RSRQ and give the SID or the Request ID one by one that it is giving you ( request no. which is not updated properly)
Mke the QM status as RED for all of them.
Since you have already deleted them from the targets, just changing the QM status to RED will be sufficinet.
You have make the QM status to RED inorder to inform the system that the requset is incorrect one and has been deleted.
Once it is set to RED, system will not prompt any req and say "request no.# not updated properly".
i suggest you the second option.
Once you resume the delta load, it should run successfully.....and if you feel some data is still missing from 29th Dec 2010 thru 11th Jan 2011, just run a full repair load the get the data back.
If your Datasource is of LO extraction u may need to fill the setup tables to perform full repair.
Please let me know if the Datasource is of LO extraction. Also let me know once the issue is resolved.
Regards,
Sudheer.
Edited by: Sudheer Kumar Kurra on Jan 22, 2011 7:58 AM
Edited by: Sudheer Kumar Kurra on Jan 22, 2011 8:03 AM

Delete Request which is already updated to Futher data target

Hi Experts,
Is there any way that we can delete a request from infocube which is already updated in to another data target.
My requirement is i have PCA infocube which 3 full loads and 1 delta. I can delete the full loads by using delete overlap request process type. But from PCA infocube the data is futher updated in another planning cube as delta request to update the actuals.
This is causing the problem as the data is getting further update to another cube as a delta request i am not able to delete the overlapping request of full loads in PCA cube. Any ideas or suggestions would be a great help.
please note that i cant change the dataflow at this point as this cube is already in production.
Thanks,
RRRRR.

Hi R,
thanks for pointing this out.
I still think the procedure that I described would be suitable.
Let me re-capture: You want to delete the Full request in the Infocube, but you don't want to touch the data of this request that has been already updated in the planning cube.
1- Delete the full request in your infocube
2- Confirm the messages that this will lead to de-activating the delta to the planning cube (as explained previously)
3- Load your new full request into your infocube iif you want to
4- Set up the delta between Infocube and Planning cube again, by requesting an INIT w/o data
This way you will be able to change the data in the Infocube, but not impact the data that has already been updated in your data target the planning cube.
In case you want the new FULL request to be updated via a DELTA into your planning cube you have to swap the order of steps 3 and 4 above.
Hope that clarifies this approach to you.
kind regards,
Ralf

Request (PSA) was NOT posted successfully to data target (InfoCube)

In our daily load process chain I am getting an Error Message for "PSA to InfoCube" as:
Request was NOT posted successfully to data target (InfoCube)
Message no. RSMPC163
Please what is the exact problem it means & what is the solution
Rajesh Giribuwa

Hello Rajesh,
This requests fails when updating from PSA to Infocube.
Pleaes check the update rules for errors.
Try to find out the exact error message and explore the tabs in monitor for this job.
Hope this helps..
thanks,

Data target problem

Similar Messages

Maybe you are looking for