Data target technical name for a query
Hi
Can some one tell me how to find the respective data target technical name for a report (query)?
Thanks
Abhi
Hi,
Create a View on tables RSZCOMPDIR and RSZCOMPIC and take fields INFOCUBE,COMPID and keep join condition
1) RSZCOMPDIR-COMPUID = RSZCOMPIC-COMPUID.
2) RSZCOMPDIR-COMPUID = RSZELTDIR-ELTUID.
and keep condition RSZELTDIR-DEFTP = 'REP'.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma
Message was edited by: Anil Kumar Sharma
Similar Messages
-
Display technical name of a query in a web template ?
Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps. -
While saving Bex query with Technical name, it says Query already existing
Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh -
Technical names for drop down values through webui
Hi All, I have ECC 6.0 (SAPKH61705) transactions being launched in CRM 7.0 (SAPKU71305) through the transaction launcher. We are able to display technical names for values in ECC through the gui, and in CRM in both the gui and webui. Is it possible to display the technical names for ECC through the webui? Apologies if this is not the correct forum, I was not sure where to post. For further clarification of the issue, I hope these screen shots assist: ECC gui with 'display technical names' activated: qui - tech names on.jpg CRM webUI with 'display technical names' activated in both ECC and CRM: webui - tech names not visible.jpg Assistance appreciated.
Hi Amy,
Yes, it's possible.
You can achieve it by coding. Instead of passing only the description to your drop down values, we can send technical name and description simultaneously to your drop down value. That's it.
BR,
RAM. -
Program name for the query generated using sq0102-03
Hi Folks,
How can we know the proggram name for the query generated using sq01 and all?
K.Kiran.Hi Kiran,
U can get program name of nay transaction code by following this procedure
after entering tcode it will direct u to the related screen then on the tool bar select system then go for status there u can find program name
Rewards if helpfull
Regards,
Pavan -
Identifying Technical name of a query through a portal link
Hi,
If from a portal link I see a BW report, how can I know its technical name so that I can access it in BEx to see the query definition. The title on the portal appears not to be helping.
ThanksIn the future, please do not post the same question more than once:
Identifying Technical name of a query through a portal link
Thanks! -
How to change Query Description/Technical name of a query
<i><b>Hi</b></i> I have couple of questions with Query name changing.
<b>1)Is it possible to change the Technical name of a query?
If Yes how?
2)I could change the description of a query but when the same query is saved in a role how to change its description?</b>
<i><b>Thanks
Ajay</b></i>hi,
open your query in query designer and use button 'save as' then you can change name description.
Remember that when you change technical name it will be completely new query and you will have to add it to your role.
Regards,
Andrzej -
Authorization check on technical name for statistical key figures
Dear experts,
I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
Thanks for any ideas,
RenéTry something in similar lines as suggested in below link:
https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
Regards
Sreenivas -
Technical name for formula in query designer
Hi,
We have created some formulas in Query Designer.
We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled.
Is there a way to assign technical names of the formulas created in the query designer.
Regards,
CharuCharu Pandey,
Formulas are local, means available for particular queries only. No technical name.
Create Calculated keyfigures instead of formulas..., so you can save with technical names.
To display technical name in query, give discription same as technical name.
Hope it Helps
Srini -
Find technical name of receiving query in RSBBS assignment
Dear Experts,
under transaction RSBBS one can assign sender/receiver details. While the technical name of both sender and receiver are entered when createing the RRI, one can only retrieve a compressed ID (i.e. 46F28FNV1L4H1QENI1KKEKWUCAZPAOPRD) for the receiver in transaction RSBBS.
We would like to find a way to determine the technical name of that particular compressed ID. I have already searched the RSBBS* tables, but I cannot get past the compressed ID (field RONAM) in i.e. table RSBBSQUERY
My question:
- Can you provide me a table/view/program/transaction/... that shows the relationship between senders and receivers by means of technical query names (not ID's)?
- Or can you provide me (step-by-step) the relation between different tables and fields that would allow me to do so?
Kind regards,
PJHi Simon,
thank you for your reply. I have researched your proposal, and I can indeed find the relation between my sender query's technical name ZSENDERQUERY_Q001 and the field RSBBSQUERY-RONAM that looks like this: 46U5CEI2BU3U8P8GZOFWWN3GKAZSD_C03 (Mind the name of the infoprovider at the end!).
This information can also be retrieved from transaction RSBBS, where I can enter 1 senderquery's technical name, and which returns me the associated RSBBSQUERY-RONAM values in the column "Receiver Object". Your contribution allows me to create a view to get this information for multiple sender queries from different cubes.
However, I would like to go one step further. From this RSBBSQUERY-RONAM value I would like to get the target/receiving query's technical name that looks like this "ZRECEIVERQUERY_Q002".
This is my ultimate goal as I need to delete all obsolete queries from the BI system, and the associated jumpqueries. Creating a single list by means of a view would help me a lot.
Kind regards,
Pieter-Jan -
Inputting technical name for varaints in portal makes it viewable to all
Hello all, we are BI 7.0 using Portal for reporting
This is the issue I am facing, when an user is trying to save a varaint for any particular query it asks for description and technical name. Now if the user only enters description and not tech name still the system accepts it and it works fine. If user inputs both the fields still it works fine. But now the difference is that if the user has entered technical name than that varaint can be viewed by all the users kind off like global variant for everyone; and if the user only inputs description than only the user that created the varaint can see it.
So i just want to take away the technical name box from that screen; where/which template do I need to modify? I am using 0ANALYSIS_PATTERN for reporting.
Is there any other work around for this or information that i am missing and i am seeing such behavior can someone explain.
Thanks in advanceHi guys,
Thanks for your answers first of all.
I don't want to store the technical name of the openhub in the logical file name....i want this to be determined dynamically, depending on the openhub that is used with this logical file name.
I was wondering were i can fetch the openhub technical name during the execution of the DTP on the openhub / when also the function module FILE_GET_NAME is being ran.
Let me know!
Thanks in advance!
Regards,
Freek -
Function module to create query view from technical name of the query ?
Hi Experts,
I am trying to create webservice definition using function module.
In this code, I am calling function module 'RSCRMBW_REPORT' which requires query view name ( we can see this in RSCRM_BAPI) as a value for parameter i_reportuid.
For the time being I am hardcoding the value but I need to use a function module which will convert techincal name of query into query view.
Can anyone have any idea about the above requirement? Or is there any other way to solve the problem?
Thanks in advance
Shamkant
Edited by: SHAMKANT SONAWANE on Apr 7, 2009 5:38 AMHi,
You can use FMs CONVERSION_EXIT_GENID_INPUT and CONVERSION_EXIT_GENID_OUTPUT to get query view.
First call FM CONVERSION_EXIT_GENID_INPUT with parameter input as query technical name then it will return Output in the form of GENID .
Pass this GENID as input parameter to FM CONVERSION_EXIT_GENID_OUTPUT to get query view as output.
Eg :
Test for function group RRI5
Function module CONVERSION_EXIT_GENID_INPUT
Uppercase/Lowercase
Runtime: 6,652 Microseconds
Import parameters Value
INPUT Y0IC_C03_Q0018_2
Export parameters Value
OUTPUT 4D1I916ID7TWS1CK27154WYZ8
Test for function group RRI5
Function module CONVERSION_EXIT_GENID_OUTPUT
Uppercase/Lowercase
Runtime: 2,818 Microseconds
Import parameters Value
INPUT 4D1I916ID7TWS1CK27154WYZ8
Export parameters Value
OUTPUT 0IC_C03/Y0IC_C03_Q0018_2
0IC_C03/Y0IC_C03_Q0018_2 is expected query view.
Hope it helps...
regards,
Raju -
Technical names for objects within RSA1
Hi!
I cannot see in tcode RSA1 --> BI CONT --> Object Types --> Queries the technical names of the objects
When I search for 0TCT_MC21* as query, no results can be shown.
How can I change these settings in order to see the technical names of the objects as well?
Any helpful information will be very appreciated
HolgerHi,
When you click on select objects there is an icon which says Technical Names on/off. This will show the objects with technicakl names.
Amith -
How to check a query element based on the technical name of a query builde?
We often see, e.g., 401OQ2EEM5EJH4GQ5N2HFNE7P as a query element of a query builder. How to know what kind of InfoObj. or R2R link it would be base on the long technical name? We remember there is a table to look these up, what's the table name and how to look for it's description name?
Thankshi Ari,
The table you recommend seems to only work for Report to Report link, but not for query element, is there any other table that we can find which InfoObj. is used for this long technical name in query?
Thanks and we have given you rewards points. -
i want to know one thing how the name for the report is made.
Transaction code ZPNL_TESTDEMO
Package ZDEV
Transaction text FGI3 P&L REPORT
Transaction START_REPORT
D_SREPOVARI-REPORTTYPE = RE
D_SREPOVARI-REPORT
D_SREPOVARI-EXTDREPORT
D_SREPOVARI-VARIANT
D_SREPOVARI-NOSELSCRN
D_BACKGROUND_EXEC
D_SREPOVARI-EXTDREPORT =
FBRG01FAGLFLEXS ZTESTDEMO.
the question is how to determine the name of the the report to call i.e (FBRG01FAGLFLEXS ZTESTDEMO)
this is made in parameter transaction in se93.sorry to say about the query.....actually the report is made in report painter.
and i am able to see it in fgi3.....
but the issue is how can i make the transaction that can run that report directly.
regards
saurabh
Maybe you are looking for
-
Some macs don't appear in shared menu
I've got an iMac, mac mini, and a dual core all running on an airport network. When I am on my Tower the other machines sometimes disappear out of the shared menu in the finder window. They are on and awake, yet I can't share files. Files sharing is
-
Ysterday I updated to the new IOS6 on my Iphone 4. The phone service is provided by the Softbank carrier in Japan but I am an American and my Itunes account is U.S. After the update I get this warning when trying to install app updates "Your accoun
-
Hi, I have order information in two files (OH231456.txt and OD231456.txt). Both the files contains information on the same order. One is Order Header and another is Order Body. I'm reading the each file with a file adapter and passing each generated
-
Goa line item sequencing issue
Hello experts, I am facing a problem in GOA line item sequencing in SRM 4.0. I create a GOA with lets say 3 line items and distribute it successfully to the backend. Now if I want to add extra items using option 'Add Calaog items' from R/3 material a
-
Volume iPhone 5s too low from speakers
My iPhone 5s has low volume from the speakers. It is plenty loud thru the headphones. Is there a way to fix this?