Data target

Hi guru's,
For updating external data to infocube,
I created all the settings in Administrator workbench.
Created infocube &transferrules &update rules but time of updation from flat file its not identify the data target but in dataflow it shows the data target so please let me know why its like this.
Thanks in advance
Prabhu

HI Prabhu,
While creating the update rules for Info cube, in the first pahe you find the data source with three radio buttons..info source,ods object and info cube...Have you selected the correct info source?..check this..
regards
uma mahesh

Similar Messages

APD, filename for file data target

Hello,
i am designing a APD process with a file as process target.
I can hardcode the file path and name in the data target properties, however i would rather set the filename by user input or by a abap routine (eg. include the date of APD execution in the file name). Is that possible?
Thanks in advance

Hi,
You can use the option 'Logical File Name' option to create a dyanmic file name.
You can define a Logical File Name in tcode 'FILE', where you can append system date, time, varaible to a static file name.
Hope this helps.

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

How to push a perticular request from PSA to Data target using DTP in BI

Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.

Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D

How to find from Data target filled by which process chain.

hi all.
i have list of cubes i want to know that which cube is filled by which prcess chain ...
can anyone suggest me appropriate solution.
simply i want to know that when reconcilation which process chain affect on which bex report so that if one process chain got failed then i will not generate that specific report for that day..
i have list of multiprovider on which we are generating rports and tech. name of report also i have.

Ganesh ji,
Choose your infopackage which holds the data targets, in the Infopackage screen reach the Scheduler tab and you will find the where-Used list. This will let you know the particular process chain responsible.
thanks
Prabhakaran
09176665954

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to initialize delta for a new data target

Hi
I have an ODS from which there are several other targets getting updated thru an export datasource. The delta initialization happend some 6 months back. I now have a new ODS into which i need to load the data from the original ODS. How can i initialise the delta to my new target without changing the delta initialization of the other targets and continue the delta for all of them together?
can i use the same initialization for my new target??
If i do a full update and then a initialise w/o data transfer, will the further delta bring the data from the correct point, is there a possiblity of data loss??
Regards,
Sujai

Hi Ajay,
the steps are as follows.
1 delete the initialization. open infopackage >> menu scheduler >> Initialization options for source systems >> delete the request thats there.
2. Now go to the Update tab of the infopack >> select option Initialize Delta process >> check the option initialize without Data transfer
3. Goto Schedule tab and start the job.
here the data targets will be all the targets the infopack loads.
4. Create a new infopack
5. goto Data targets tab >> select data targets >> put a check on your new ODS/Cube
6. Goto Update tab >> select the option Full update
7. goto menu Scheduler >> select Repair full request >> put a check on Indicate request as Repair Request >> hit OK
8. Goto schedule tab >> start the job.
9. Continue with the existing Delta infopack that was load the old ODS/Cubes and make sure your new ODS/Cube is also cheked for the delta.
Regards
Sujai

Can u give clear steps how to load 3 data target at a time by the help of p

can u give clear steps how to load 3 data target at a time by the help of parllalesim

hi,
create the load infopackage type and give the infopack you need to load.
create 3 similar process types.
chain should have this flow
start -> delet index(if cube is the target) -> load target(connect the load process to start process) parallel -> and process -> create index(if cube)/actiavtion of ods(if ods)
Ramesh

Delta Upload request from ODS is not including the Data target of planning

Hi,
I have a process chain in which there is a delta upload from ODS to 3 different data target. One of the data target is the planning cube. last 2days back i have changed the process chain schedule after was the Delta request is not hapenning for Planning cube. The process chain contains the changing the planning to load mode and load to planning mode. Every thing is working fine but the Delta is not happening for the Planning cube. Delta request are going correctly to the Other 2 data targets. Now it was like Delta has excluded the Planning cube. Another this there is nto planning package is appearing in the Infousources. and when I am trying to upload manually from ODS to Data targets it say that No delta is there. Please help me in this. This is a production problem. I have checked all the data monitors every thing is from but no delta is hapenning for the planning cube.
Thanks
Naveen.

Resolved

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Updating data from PSA to Data Target

Hi,
I just want to update data from PSA to data target.
There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data target.
There is a update rule for 0Vendor but itu2019s not active at the movement and also it is not properly mapped with the 0Vendor.
Is there any other method which I can update data from PSA to Data target with in the same process chain.
Thanks
Ganesh

If this is BW 3.5, change the infopackage setting to load to data target as well.
This is a other w ay than using the update from infopackage.
if this is 7.0, Use the DTP to load from PSA(datasource) to Target.
Let me know if this helps.
Thanks
Sachin

Delta Update in data Target Must be Deactivated Before deleting the request

Hi Experts,
I got an error while deleting a request from an ODS target. In breaf Let me explain..
Today one data load got failed. The data source 0CRM_SALES_CONT_I ( CRM Sales Contract : Item ) is updating data to 4 ( Four ) ODS targets.
So I forcefully made the request red to delete the request from the targets. But I unfortunately deleted another request without making it RED, I reconstructed it. Everything is looking fine.
   But the thing is , when I tried to Delete the ERROR request from the other two related Data Targets ( 0CRM_CN2P and   0CRM_CNT1) , I fount these warnings..
                --> Request 140522 already retrieved by Data Target BWPCLNT600
                --> Delta update in Data Target BWPCLNT600 must be DEACT. before deleting the request.
                --> Do you want to DEACTIVATE the Delta Update in the Data Target BWPCLNT600   ?
   I clicked on YES.
I am having doubt, will it make any problem in future ? Or How Can I Resolve this problem   ?
Thanks,
Utpal.

Hi shanthi bhaskar ,
Thank you. But the client no which I have mentioned is not our. That is different, I have given for the example. Bur the DS and ODS name are as it is.
   and Shanthi, Won't be any problem as I got the warning as mentioned above.. ?
Thanks,
Utpal

Unable to delete data target contents of Write-Optimized DSO in Process Chain

Hi Experts,
We are using SAP Net Weaver BW 7.01 version and we need to delete the entire data target contents of Write-Optimized DSO in the process chain before the next data load.
I included this step in process chain but still it is failing with errore message"Message not found (in main memory), Drop Cube Failed In Data Target"
This process type is working during BW 7.0 version but not in BW 7.01 version.
However i found that we can use the program RSSM_DELETE_WO_DSO_REQUESTS to delete old requests in the Write-Optimized DSO for BW 7.01 SP07 as per SAP Note 1437407 but still it's not working even after implementing this program as the Prerequisite to delete the request is the data mart status should be updated where it is not happening for the program.
We had an process type option to 'delete the requests from Write-Optimized DSO' directly in BW 7.3 but still not available in 7.01 version.
Could you please suggest me on how to resolve this issue in BW 7.01?
Many thanks for your help in advance.
Regards,
Madhu

Create ABAP program as attached code.
Then you can use that ABAP program in process chains through ABAP variant
ABAP varaint should have following properties
Select call mode as Synchronous; call from Local; and Program
Give your ABAP program name in "program name" and create one program variant for each write optimized DSO.
Please refer how to use ABAP program in process chains for further details.
Hope this helps

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Data target

Similar Messages

Maybe you are looking for