DATA THROUGH ...........
Hi, Gurus
I want zno_doc(no of documents for vendor)infocube data.
my senario is.
i want no of open documents exists for vendor and have to check company code of vendor also.
company code - 100
vendor - 10001
documents, item_status
5000 open
5001 open
5002 close
5003 open
zno_doc(no of documents for vendor) value should be = 3.
where i should write coding for this zno_doc(no of documents for vendor).
My report is based on infoset where i am using ods.
so in one of them i want to add that zno_doc(no of documents for vendor)info object.
looking for input.
Message was edited by:
SSMS
Hi
You can code in the update rules before uploading for that infoobject doc number
Assign points if useful
Thanks
N Ganesh
Similar Messages
-
Can't load data through smart view (ad hoc analysis)
Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com -
i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer
I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi 729 KB -
How do I access session data through an EJB?
Hi
How do I access session data through an EJB?
I am currantly developing a Web service (using ejb's, JBoss.net and Apache Axis). A client making a call to this Web service, is expecting a bussiness-object in return. My problem is that this bussiness-object i stored in a users session data. How do I retrieve this bussiness-object from the users session.
I have read that this does not work with httpsessions, is this true? If this is true, is it possible to store the bussiness object in a JavaBean e.g:
<jsp:useBean id="userContextWebImpl" scope="session" class="com.ac.march.client.UserContextWebImpl">
<%
String key = "test";
String value = "This is the value";
userContextWebImpl.setValue( key, value1 );
%>
</jsp:useBean>
and then retrieve this information through the EJB? Or is it possible to do this by using Statfull JavaBeans? Or can this be done through a nother solution?
Please help!I have created a JavaBean with scope="application" to store some data. The data is stored when a user prefomes a spesific task.
A different person then makes a call to a Web-Service on the server. The Web-Service then asks an EJB to retrieve the data stored in the JavaBean (servlet cotext). In other words: How do I retrieve this data from the EJB?
I have tried with this code, but with no luck.
(ApplicationContextWebImpl is the JavaBean)
public static String getBookingResult( String key )
String myResult = null;
String myKey = key;
ApplicationContextWebImpl applicationContextWebImpl = null;
try
applicationContextWebImpl = new ApplicationContextWebImpl();
myResult = (String)applicationContextWebImpl.getValue( key );
catch ( java.rmi.RemoteException e )
return myResult;
} -
Importing of BPPayment Methods data through DTW
HI All,
Please explain how to upload BPPaymentMethods data through DTW?
Kind Regards
Silpa.NYou can use oBPPaymentMethods template to reach your goal through DTW. There are only 3 column needed to fill the teplate.
RecordKey is identifier. It has to be unique.
Linenum is (line number - 1) in that record.
PaymentMethodCode is Incoming or Outgoing
Hope this info is helpful to you.
Thanks,
Gordon -
How to pass delivery date through BAPI while creating a sale order
Dear frndz,
I am using 'BAPI_SALESORDER_CREATEFROMDAT1'
to create a sale order .
I don't have any problem..
But I have to pass schedule line delivery date through this bapi .
I used REQ_DATE in structure BAPISCHDL.
But I can' t get it.
Through which parameter can i meet this..
The sale order should be created line item wise along with my delivery date..
Any suggestions...
regards.
sivaDear frnd,
Danq for your response..I can't use DLV_DATE for this requirement..
But I used REQ_DATE in the structure BAPISCHEDULE .
I came to know that the problem i faced previously was only
internal data conversion.
Now am able to pass my delivery date..
so I am closing the thread..
Regards.
siva -
Standard transaction CG02 is not saving the data through F4 help.
Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu. -
Error while Loading data through .csv file
Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak -
SAP BPC 7.5 SP3 and Citrix Entering Data through BPC Client and Citrix
Hello BPC experts,
my client is using SAP BPC 7.5 SP3 in combination with Citrix. We are having problems now, while entering data through the BPC Client (installed on BPC Server) and the BPC Client (running on Citrix).
When we enter data through the BPC Client (Server) and expand the sheet, we can only see the data that we entered through the BPC client (Server). When entering data through the BPC Client (Citrix), we can see only the data we enter through the BPC Client (Citrix).
The database, however, saves both entries correctly. For test purposes we created a test report which shows both entries correctly in the BPC Client on the server and on Citrix.
Does anyone have an idea what can be wrong with our system? We tried to create an EvDRE log File for this BPC version as well, but failed. Maybe one of you already did that and can help me with this.
Thanks in advance!You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG) -
Error while importing Item Master data through DTW
Hello Expert,
I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
Please help me...
I am using SAP 9.0 Pl 6
Regards,
SandyHi Sandy,
Kindly follow the check list
1. Right Click DTW and run it as Administrator.
2. Is your DTW version is same as SAP B1.
3. Uninstall and re-install DTW.
4. If you are using 64-bit DTW, try to use 32-bit one.
5. Check the Template, is it of the same DTW version.
6. Remove all the unnecessary columns.
7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
Hope you find this helpful......
Regards,
Syed Adnan -
Error in accessing data through external table
Hi,
I am getting the following error while trying to view data through external table,
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04062: no data source specified
ORA-06512: at "SYS.ORACLE_LOADER", line 19
according to this error "KUP-04062: no data source specified", location should be specified and i have specified the location as
LOCATION (<diectory_name>:' '),
then also it is giving the same error.
Please Help!I am also got the same error when retrieving the data from external table.
I resolve this problem, like this:
1. I imported the flat file(.csv) into repository.
2. Map that flat file fields to database table cols.
3. Deployed the mapping using controlcenter, and run the mapping.
4. if it fails there, i loaded the flatfile data through the command prompt using "sqlldr" statement and control file is our mapping control file.
5 Then it loaded data into database table sucessfully.
Thanks. -
Unable to update payment cards data through ORDERS05 in va02
Hi all,
I noticed one thing that in IDOC_INPUT_ORDERS (ie creation of sales order) we have a bdcdata populated for payment cards (for header in VA01) .But when we are changing sales order by IDOC_INPUT_ORDCHG (change sales order VA02) we have no bdcdata populated for updating payment cards ( like CCNUM ) though we are passing these details through IDOC.
Can anyone tell me why bdcdata through idoc posting is getting populated in VA01 but not through VA02 . We can change payment card dara manually in VA02 why cant we achieve the same through idoc.
Please help me as updating payment card data through idoc in VA02 is my requirement .
Do i need to populate it by writing code in an exit in IDOC_INPUT_ORDCHG.
Any help is appreciated.
Thanks and Regards
SwetaHi,
Can you please let me know the segment in ORDERS05 Idoc to process the Payment card information and if the standard Function Module can handle the creation of a Sales Order with data for Payment Card.
We have a requirement to map the Tokenized Number of the Credit Card send from a store front end to ECC mapping via SAP-PI.
Thanks in Advance, -
Restricting Creation/Update of Profit Center Master Data through KE51/KE52
Hi,
I have a scenario where profit center master data is maintained in MDM which acts as central repository and the master data is syndicated from MDM to ECC through PRCMAS IDoc. Business requirement is that since MDM is acting as central repository creation/update for profit center through transactions KE51/KE52 should be restricted in ECC. I know that through roles we can restrict user to create profit centers but is there any way/configuration steps which we can perform to restrict user to create profit centers through transaction and I also want to know if that process would affect the creation/updation of master data through PRCMAS IDoc.
Thanks,
AmitHi,
As I told you can go forward using SetID but for that you have to create the SET than assign it to a table and also have to cutomize a standard FM.
Meanwhile I will tell you a easy way you can opt for Transaction Variant usinh SHD0 where dont give the option to save so that no user can create any Profit Centre and than assign that Tcode to the users.
Its a simple way hope it helps you.
Thanks
Arbind -
Upload excel sheet data through sqlloader into oracle tables
hi everyone,
i am working with excel sheet with following records
8501 Jacob Marshall 15000 21/10/2009 Finance
8502 Chris Campell 50000 13/06/2008 R&D
8503 Simon Dough 50000 3/07/2008 Engineering
8504 Mark Haggai 75000 9/3/2006 Product Management
8505 Verica Beverley 45000 7/2/2008 HR
and i saved it in emp_details.csv
after that when i write following code to make control file
load data
infile 'C:\Documents and Settings\prashant_dabral\Desktop\a.txt'
into table tmp
field terminated by','optionally enclosed by" "
(emp_no,emp_name,salary,doj,dept_name)
after this pl\sqldev returning me error message that ORA-00900:invalid sql statement
can anybody tell me how to resolve issue
or
another method to Upload excel sheet data through sqlloader into oracle tablesA control file is a file located on the operating system, not some SQL or PL/SQL code you try and execute.
Create the control file as a file and then use that to load your data with SQL*Loader from the command line.
http://www.morganslibrary.org/reference/sqlloader.html
Or better still, create it as an external table and then you don't need a seperate control file or need to use sql loader from the command line...
http://www.morganslibrary.org/reference/externaltab.html -
The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.
nobuto wrote:
> I want to transfer data through the serial port in the same coding
> that hyperterminal uses. How can i do it?
>
> The serial port seems to be working, and labview seems to be sending
> the data, but the problem is in which format does it send the data,
> because in hyperterminal i just input the string "JDX" and it sends it
> to my device, with labview it sends something but my device does not
> recognize it.
Hyperterminal adds the carriage return/line feed to the string which is
generated by the return key to send out the current line. LabVIEW simply
sends out what you tell it, so try to set the string to "Show \ Display"
format and add a \r or \n or \r\n to the command you want to send out.
Assumes of course that you set the right baudr
ate/bits/parity etc in
LabVIEW with the VISA property node, when opening the serial port.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
I want to capture data through I/O while posting to Customer Line items
Hi Experts
Can you please suggest me that while posting to Customer line items i would require to capture data through Internal Order, is this possible if yes please explain
Regards
SreenivasuluHi
Internal Order details can be updated to the P&L line item ie revenue line item in your case. From ECC 6.0 it will be available in the General Ledger view of the document.
Regards,
Lakshmanan Krishnan
Maybe you are looking for
-
Creation of a Table control with the wizard
Hi all, I'd like to add a table control to my dynpro with the wizard. I want to use an internal table and a work area from my program but I get the following error : "The table work area WA_FID does not exist or is not a structure". here is my data d
-
I have an iphone 4s. I tried to download the iOS 7 but it couldn't download because it said it was an error. I have plenty of space to download the upgrade. Do you know what it is?
-
20 GB Ipod Problem - Not viewable in Windows and wont start
Hello all, wondering if you can help me with this Ipod problem i have. 1) Ipod turns on and displays folder with exclamation mark. 2) Ipod is not viewable in my computer 1 - I have tried a reset and putting into disk mode, which goes through fine, bu
-
Awrrpt gives wrong tablespace names (old names of renamed tablespaces)
Hi all, I found a strange thing running some awr reports: I'm running a 10.2.0.1.0 db on a 32 bit Win cluster. I rebuilt some tablespaces to switch to automatic extents management, and I renamed tablespaces to a new name. Everything works fine, but a
-
Tiger won't reinstall on machine already running tiger
Hello all, I'm trying to reinstall tiger on my old laptop (to erase everything and clean it up for someone else). When I put in the installation disk it says that it 'cannot be installed on this machine'. Since the machine is already running tiger, t