Data tips on charts

Can anyone point me at the code in the DMV classes that creates, positions
(and doesn't scale ;-) ) the data tip that appears when you mouse over bars
in a ColumnChart ?
Tom Chiverton
Helping to administratively differentiate strategic corporate impactful
strategic users
as part of the IT team of the year, '09 and '08
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the
registered office together with a list of those non members who are referred to as partners. We use the word partner to refer to a member of the LLP, or an employee or consultant with equivalent standing and qualifications. Regulated by the Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit
www.halliwells.com.

On Thursday 05 Mar 2009, Tom Chiverton wrote:
> Can anyone point me at the code in the DMV classes that creates, positions
> (and doesn't scale ;-) ) the data tip that appears when you mouse over
> bars in a ColumnChart ?
Hmmm, DataTip.createChildren() seemed obvious, and works, but when the scale
is changed, the cache of tips needs to be invalidated.
Somewhere in ChartBase would seem sensible - this cache is probably already
cleared in various other places is it ?
Tom Chiverton
Helping to quickly pursue value-added intuitive products
as part of the IT team of the year, '09 and '08
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the
registered office together with a list of those non members who are referred to as partners. We use the word partner to refer to a member of the LLP, or an employee or consultant with equivalent standing and qualifications. Regulated by the Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit
www.halliwells.com.

Similar Messages

  • Data tips in column charts - numbers need trimming

    I want to keep the standard data tip format in my column
    charts, but the numbers often look weird - even though the raw
    numbers add up neatly to eg 3 decimal places, the data tip shows
    15! As an example when the total of a column is 49.346, the data
    tip shows "Total: 49.346000000000004". How can I stop this? I can't
    find an example of how to do my own data tip function that
    replicates the standard so I can round the numbers down.
    Thanks.

    Hello,
    Sorry about resurecting an old post, but I'm having the same issue. My original numbers have unknow number of decimals, and when storing them in my ArrayCollection, I was originally using Math.round(myNumber*100)/100 to keep only 2 decimals. To my surprise, chart datatips show some numbers with 10 decimals (38.4899999999 for example).
    I switched to using Number(nfToVal.format(myNumber)), since I already use the same NumberFormatter to display those numbers in a datagrid.
    For info, nfToVal is:
    var nfToVal:NumberFormatter = new NumberFormatter();
    nfToVal.decimalSeparatorFrom=".";
    nfToVal.decimalSeparatorTo = ".";
    nfToVal.useNegativeSign="true";
    nfToVal.thousandsSeparatorFrom="";
    nfToVal.thousandsSeparatorTo="";
    nfToVal.precision="2";
    nfToVal.rounding="nearest";
    Problem still there! Numbers display correctly as strings after being formatted, but get decimals again when converted back to numbers ...
    Any hints ????
    Thanks,
    Olivier

  • I need to display pie chart data tips at specified location instead of default location?

    I need to display pie chart data tips at specified location instead of default location?
    can any body let me know how to do that?
    thanks guys.

    Hi,
    Check this thread.
    Log for J2EE Web Services?
    Regards,
    Harini S

  • [svn:fx-4.x] 14837: Changing the way data tips are rendered in when mirrored.

    Revision: 14837
    Revision: 14837
    Author:   [email protected]
    Date:     2010-03-18 00:26:27 -0700 (Thu, 18 Mar 2010)
    Log Message:
    Changing the way data tips are rendered in when mirrored.
    Single data tip shows to left in RTL now which shows to right in LTR
    Callouts connecting datatips to chart items are also modified.
    QE notes:
    Doc notes:
    Bugs: FLEXDMV-2347 ( Datatips cluterred in bubble chart when layoutDirection=rtl)
    FLEXDMV-2348 ( Position of datatips not changing WRT layoutDirection)
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FLEXDMV-2347
        http://bugs.adobe.com/jira/browse/FLEXDMV-2348
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/chartClasses/Ch artBase.as

    Setting Lightroom's preview size to larger than screen resolution is guaranteed to slow things down. I have a dual monitor system whith Lightroom showing the loupe on one screen and the grid on the other. The screen sizes are 1920x1080 and 2560x1440. Following your practice for previews would bring my system to a crawl and I have an entry level workstation.All my previews are of standard 1024x768 in size. The only delays in viewing come when Lightroom is asked to display an image where there is no preview. Once the preview has been created, browsing is near instantaneous.
    I beg to differ! The reason is that a preview can be used for any size, which is smaller than that of the preview. Scaling down a preview can be done with little or not loss in quality compared to getting the full resulution and scale that down. Scaling up is not possible.
    In your case, you will not use the previews of 1024x768 at all for full screen display. Instead you will force L3 to create bigger previews the first time you open the photo. You could try this by generating the standard previews for new imported photos before you start browsing. Then try to browse. You will probably get the "Loading" message, which indicates that the preview was not used and another one with higher resolution will be made. Then try the same experiment, setting the size of the standard preview to 2048. If, and only if, the size of your display area is not more than 2048 pixels wide and you display a photo in lanscape orientation, you will be able to browse without delay after generating the standard previews.
    If I understand your setup correctly, you display the photos in a window of 2560x1440 pixels. I suspect that only 1:1 previews could be used for that. I think Adobe should increase the maximum size of the previews to a value larger than 2048, so that you are not forced to use only the 1:1 previews.
    I agree, that when the previews have been generated, browsing is near instantaneous.

  • LineChart data tip won't display with single data point?

    Hi,
    I have a Flex 3 LineChart with LineSeries which use CircleItemRenderer. If there is only a single data point to display, the data tip is not displayed. If there are several data points, each data tip is displayed correctly.
    How can I make the datatip appear correctly with even just one data point? Any workarounds for this problem?
    Quick googling found that I'm not the only person with this problem. A suggested workaround is to use PlotChart instead, but I don't want to go there unless there is absolutely no good way to solve this problem directly.
    http://www.pubbs.net/200911/flex/28102-flexcoders-line-chart-data-tips-dont-display-when-t heres-a-single-data-point.html
    Thanks for any clues!!
    BR,http://forums.adobe.com/people/sikkfgkwwsdfkjkjwjfhjdskj
    sikkfgkwwsdfkjkjwjfhjdskj

    No one wanted to help me but I figured out that I was not referencing the DSN on the test server, only the local DSN. 
    The information to connect to the MSSQL database given by my hosting company was not correct for Dreameweaver (or MS Access) either.

  • Make data tip show currency in stacked ColumnChart

    Hi all,
    I'd like to know the best practice for showing the number values as currency in a data tip on a ColumnChart.  My current specific problem is with one that has a type of "stacked".
    By default it renders the Series name, category field, item value, item percent of total column and total column value.  I'd like item value and total column value be formatted using currency.
    I tied into dataTipFunction as a possibility, but can't seem to find all the necessary values to make this work.  For sure, I'm missing how I can get the total for the column easily (without iterating through all the series myself).  Is using a dataTipFunction the only way to do this, or is there a better way?
    Can someone help guide me through this?
    Thanks in advance,
    topher.

    "crl-alt-del" <[email protected]> wrote in
    message
    news:ghu2b1$t4f$[email protected]..
    > What I want to do is simple. I have a line chart, on the
    lines I want
    > the little image that denotes a data point to always be
    visible. I don't
    > want the datatip to be always visible, just the little
    image that you
    > mouseover
    > to show the tip. Surely I'm missing something...this
    shouldn't be this
    > hard to
    > figure out. Thanks in advance.
    http://flexdiary.blogspot.com/2008/08/charting-example.html

  • Display Data on waveform chart or XY graph over a long period of time

    Display Data on waveform chart or XY graph over a long period of time
    Can anyone help?
    I am acquiring data from an Ni DAQ card with the following parameters - sample rate = 12800, number of samples = 4096. I want to extract order information so as to track changes in the amplitudes of certain frequency harmonics. So I use the sound and vibration toolkit to extract this information as shown in the attached Vi.  I will like to plot the resulting amplitudes against real-time starting at the time the Vi was run.  I really want the display to show these changes over long periods (eg. days, months and even years).
    Problem.
    I have tried to plot the Y component of the resulting magnitude for a given order on a waveform chart. My choice of the waveform chart is because I also want to display  alarm limits (using the mask and limit vi) (I can't have these lines displayed on an XY graph plot).  I tried adjusting the scale offset using the property node and setting the offset to current time. However, the display on the X-axis can only show a span of  2 minutes as will be seen when you run the attached vi. I want the time display on the x-axis to be over a period of  days, months  and even years.  Is there a way to set the maximum scale on the x-axis to be say a year or so in future.
    I really want the display to be like the one in in the second attachment.
    Attached is a sample VI created using an Ni USB 9234 DAQ card. Any card will do but I am only getting the signal from one channel for this example
    I will appreciate any help that can be given to me.
    Thanks
    Attachments:
    Real-Time Graph Display.vi ‏170 KB
    Sampe screen1.doc ‏37 KB

    Long term testing can be tricky- and we'l get into that later.  Lets start with the basics that you have wrong.
    The vi as you have constructed it has only one memory element, the chart history length (default is 1024.)
    You can change the number of points the Chart will remember by Right-clicking the chart an select Chart History Length from the menu.
    But for a long term test - and one where you want to REMEMBER the first value you need a memeory element that is independant of the application.  Your PC WILL loose power or need to be rebooted eventually.  Heck it might even need to be replaced! you really need to store your data in a file. Preferablly in a file that is backed-up on a regular basis so you don't lose every point of data if the PC dies.  It realy hurts when you have to restart a 2yr test because you've lost the 18months of data you collected.
    For an application like this I would seperate my "collection" and "Evaluation" operations. 
    Have one vi that takes the reading and writes it to a file at a configurable rate  You may want 1reading  per minute for seveal days then 1 per hour for a few weeks- then maybe only once or twice a week for the next couple of years since you are looking for LONG TERM stability.  having too much data to evaluate can take a lot of digging to find the few things that interest you (but always take more that you think you need)
    Have another utility that COPIES the files, reads them and displays the data you are interested in that day.  The data you want to look at won't change over time HOWEVER, you WILL want to analize it in different ways depending on what the data trends look like.  Having seperate routines for collection and display allows you to update the display style and analisys without even stopping the collection vi (much less editing the vi)
    Jeff

  • Data web bean (chart) using a dynamic view object

    Please I want a quick help. I read all forums concerning this subject but I still couldn't do it.
    - I create a view object which takes a proameter using the ? style parameter.
    - I passed the parameter from an html page and execute the query
    of the view as follows:
    <%
    String deptno = request.getParameter("deptno");
    if(deptno != null) {
    oracle.jbo.html.jsp.JSPApplicationRegistry.registerApplicationFromPropertyFile(session , "MyProject21_package3_Package3Module");
    oracle.jbo.ViewObject v = oracle.jbo.html.jsp.JSPApplicationRegistry.getInstance()
    .getAppModuleInstance("MyProject21_package3_Package3Module",request,session)
    .findViewObject("View1");
    v.setWhereClauseParam(0,deptno);
    v.executeQuery();
    %>
    - And then I used the data web bean chart as follows:
    <jsp:useBean class="oracle.jbo.html.databeans.ChartRenderer" id="ch" scope="request" >
    <%
    ch.setReleaseApplicationResources(false);
    ch.initialize(application,session, request,response,out,"MyProject21_package3_Package3Module.View1");
    ch.setCommonScriptName("/webapp/jsp/chart_common.jsp");
    ch.getChart().setGraphType(ch.PIE);
    ch.setSeriesLabelColumnName("DeptNo");
    ch.setDisplayAttributes("CountEmplNo");
    ch.getChart().setPieFeelerTextDisplay(0);
    ch.getChart().setPieTilt(10);
    ch.getChart().setPieRotate(0);
    ch.getChart().setLegendDisplay(true);
    ch.getChart().setLegendMarkerPosition(0);
    ch.getChart().setTitleString("Title");
    ch.getChart().setSubtitleString("Subtitle");
    ch.getChart().setFootnoteString("Footnote");
    ch.setImageWidth(400);
    ch.setImageHeight(400);
    ch.render();
    %>
    - I tried to use the View1 as a view name, and the v as a view name
    but both of them get the same result
    SQL Statement error and the sql statement is displayed with the ? in it which means that he didn't replace it by the parameter.
    Please I need quick help.
    Thanks.
    </jsp:useBean>
    Remark : please send me the reply at "[email protected]"

    Hi Rishab,
    I'm running into the exact same problem, in the same situation. Did you solve this problem and can you tell me how?
    Thanks in advance,
    Paskal

  • How do I convert a 1-D array of cluster of 5 elements into a 2-D array of numbers? (history data from a chart)

    Hello,
    in my vi I have a chart with 5 Plots displaying measurement data.
    The user should be able to save all the history data from the chart at anytime. (e.g. the user watches the chart and some event happens, then he presses a "save"-button)
    I know, that I can read out the history data with a property node. That is not the problem. The problem is, how do I handle the data? The type of the history data is a 1-D array of cluster of 5 elements.
    I have to convert that data somehow into a 2 D-array of numbers or strings, so that I can easily save it in a text-file.
    How do I convert a 1-D array of cluster of 5 elements into a 2-D array of numbers?
    I use LabVIEW 7.1
    Johannes
    Greetings Johannes
    Using LabVIEW 7.1 and 2009 recently
    Solved!
    Go to Solution.

    Gerd,
    thank you for the quick response and the easy solution.
    Look what I did in the meantime. I solved the problem too, but muuuch more complicate :-)
    And I have converted the numbers to strings, so that I can easily write them into a spreasheet file.
    Johannes
    Message Edited by johanneshoer on 04-28-2009 10:39 AM
    Greetings Johannes
    Using LabVIEW 7.1 and 2009 recently
    Attachments:
    SaveChartHistory.JPG ‏57 KB
    SaveChartHistory.JPG ‏57 KB

  • In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    yes.
    To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu.  Select the menu item "Hide ..."

  • Display last 12 months data in column chart

    Hi All,
    I have one  dashbord  requirement in list box i have (example:):  "oct-11" i need to display previous 12 mnth data in column chart anybody help in excel formula how to display last 12 mnths based on list box selection.
    example:  if i select oct-11 from list box i need to display in chart like
    nov-10 dec-10 nov-10...................................oct-11
    please provide how to write in logic in excel

    Hi Shankar,
    Try this formula in excel : DATE(YEAR(A1),MONTH(A1)-1,DAY(A1))
    A1 will be your cell which is the destination of your List box. & then drag it till 12 months.
    If you are not having day from your list box then manually enter 1 in any cell and map that cell in place of A1 for day.
    HTH.
    Neeraj..

  • External XML data for more charts in a single page

    I am using a plot chart which gets data from an external XML file through <mx:HTTPService>
    I create another chart in the same page which also gets data from another XML file.
    How can i provide data to this chart through the HTTP Service ?
    - Sen

    I hope i've understood well what you want to do.
    Easily you could define 2 different httpservice with different url and bind them to chart.
    hope this help!
    bye!

  • How to extract the data from the chart. Data were not saved

    Hi everyone. Beginners question, but could not find an answer to it
    How can I get the numerical data from the chart. Chart is already on the screen and data vere not saved into file during VI run. All I have - just chart, but I need numbers       
    Thanks
    Message Edited by olka on 07-18-2007 09:41 AM

    You can still do it, the process just changes a bit...
    Copy the control to a new VI as before, and change it into a control.
    Create the diagram shown in the attached screen shot.
    Run the new VI. You will get two arrays: one of x-axis values and one of y-axis values.
    Mike...
    Message Edited by mikeporter on 07-18-2007 12:21 PM
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    extracting xy data.JPG ‏5 KB

  • Data movement of Chart of Account from one instance to other

    We are doing data movement of Chart of account tables(FND_FLEX tables) from one instance(oracle 10.7)to another instance(Oracle 11.0.3).
    Some of the columns of flex value tables are obsoleted in Oracle 11.0.3. like description in fnd_flex_values is obsoleted and description is used from fnd_flex_values_tl.
    My question is, Is it necessary to do the data movement of fnd_flex_values_tl table to get the description or just the data movement for fnd_flex_values table will serve the purpose.
    Thanks in advance.

    Hi
    When upgrading you need to populate both the fnd_flex_values and the fnd_flex_value_tl table. Please note applications will not function properly when you dont populate this table.
    I am not sure how you are populating this table, if using the oracle upgrade process then Oracle takes care of this else please ensure that you populate all the _tl tables
    Thanks
    Bharat

  • Date format in charts

    Hello,
    is it possible to change the date format in a chart?? Example: From 'dd.mm.YYYY' to 'dd'
    Edited by: Gerrit Lober on Jun 25, 2008 2:21 PM

    Hi
    No it is not possible to change the date format in Chart
    Bcos the chart displays the values or the date from the report.
    If you need to change the display in chart then Display in the report should be changed.
    Regards
    M.A

Maybe you are looking for

  • Why does Captivate 6 create mp4 files that the swf does not playback clearly?

    Captivate 5 created a .swf which suited my training purposes very nicely.  There were swf files in the library, embedded in the (rather large) .swf that I asked the students to run.  Now it seems that Captivate 6.0.1.240 won't do that.  Captivate 6 c

  • How to create STPR(Stock Trasnsfer Pruchase Req) in MRP Run

    Hello PP Guru , I am running MRP in various branch-plant .I maintained Special Procurement Key 40  for all the material in branch-plant .Here we have one supply plant .We run MRP at Supply plant once all our other branches(plant) completes their MRP

  • IB --Domain

    In IB->Configuration->Quick Configuration->IB Domains I see the app server name and application server path is wrong. I want to change it to different app server name. Plz let me know the steps and what is the signifiance of it.

  • Chart type changin in the runtime

    Hello gurus its possible to change chart type in the runtime ??? if its possible how can I do that. thnx

  • CTL-W doesn't close tab

    CTL-W no longer closes a tab in FF8 ... I do not have the evernote extension as noted [https://support.mozilla.com/en-US/questions/895191 here]