Data transfer between OSX 10.9 and WIN 7 stops

Hello,
Unfortunately, I have a problem with the data sharing through SMB.
I can connect easily to my Mac and see shared folders or data. But in attempting to copy files from Mac to Win 7 PC there is an error. The data transfer is terminated after a while. The file used in the test is an MKV with the size of 1.34 GB.
The Mac is accessed from a Win 7 PC with administrator privileges. The systems are connected via Wi-Fi 802.11 n.
The exchange of data between OSX in use of SMB or AFP works without any problems.
Maybe someone has a solution or a tip for me.
regards

Hi ip0wn,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Please click on the link for more details and troubleshooting steps:
Mac OS X: How to connect to Windows File Sharing (SMB)
http://support.apple.com/kb/HT1568
Cheers,
- Judy

Similar Messages

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Date transfer between 11g BPMN Process and Human Workflow task

I'm creating a small BPMN process in SOA Suite 11g. Pretty simple: Holiday Request where one enters name, start date, end date and leave type (e.g. annual). The odd thing is, any dates I enter into the process end up losing one day when viewed in the BPM Worklist.
So, to be clear:
* The BPMN process receives a message like this (note the +10:00 -- I'm running this in Australia):
<RequestData>
<name>JohnJames</name>
<startDate>2010-06-21+10:00</startDate>
<endDate>2010-06-21+10:00</endDate>
<leaveType>annual</leaveType>
</RequestData>
* It does some minor processing, then passes this onto a Human Workflow task (exactly the same):
<RequestData>
<name>JohnJames</name>
<startDate>2010-06-21+10:00</startDate>
<endDate>2010-06-21+10:00</endDate>
<leaveType>annual</leaveType>
</RequestData>
* When I open the task in the BPM Worklist app I see this:
name : JohnJames
startDate : 20/06/2010
endDate : 20/06/2010
leaveType : annual
So, why? My processing code doesn't alter the dates in any way at all before passing them to Human Workflow. I figure this has something to do with locales used by HW but I can't figure out where or what to change. Any clues? Comments? Ideas?

OK, I have a solution that works for me: YMMV. There's two parts to it:
1) To have the dates interpreted correctly, I changed the fields on the generated forms for the Human Tasks. The Start Date and End Date fields were created as Input Text fields with the "Converter" property set to <default>. I changed the fields to Input Date fields instead, and the dates were interpreted correctly (i.e. May 21 showed up as May 21 rather than May 20) But they still showed up in US date format: 5/21/2010.
2) To have them formatted for my locale, I added a "formatting-locale" entry to the "trinidad-config.xml" file: <formatting-locale>en-AU</formatting-locale>. The dates then showed up as 21/5/2010.
This solution doesn't give you dates automatically formatted for your own locale, or different locales based on browser, but it does give me what I want for now. Thought some folks might be interested.

Data transfer between SAP & Java and Vice versa using IDOC Process

Dear Experts,
        We are working on one of the good requirement related to data transfer between SAP and Java software. Client requirement is, they want to transfer the data in both the ways (from SAP --> Java and Vice versa also).
In detail is, after sales order creation using one custom program loading plan details will be calculated. Once loading dates are confirmed then, user will release the sales document to transfer the data from SAP to Java using "Outbound IDOC processing". Similarly in that JAVA software some shipment details will be performed, once completed from JAVA software again details needs to be pumped back to SAP as "Inbound IDOC Processing".
For this fields are already identified from external software SAP and we are looking for the same to perform the steps in SAP.
At this stage, I need your expert opinion / feedback how to go about at this stage.
Meaning,
                 1. What are the customizing steps needs to be done in SAP..?
                 2. How to trigger the :Outbound IDOC process" once the documents are "Released" from custom transaction
                 3. How to create the link between SAP and JAVA to transfer the data between these 2 software
                 4. How to trigger the "Inbound IDOC Process" from JAVA software to SAP and how to store the data in SAP
Experts, please give your feedback in terms of reply or by sending the step by step process to fulfill this client requirement.
Thanks for your cooperation.
Regards,
Ramesh

Maybe too many open questions in the same document.
Maybe you should repost a more specific question in a technical forum.
This looks like a small project where you already know what you want, maybe you should contract a technical specialist so he proceeds to the implementation!

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I Sync a folder (which contains all types files, sub folders and weighs some gigs) through wifi or USB ( and not using cloud services) between my New Ipad and Win 7 PC? Any apps available? Kindly help

How can I Sync a folder (which contains all types files, sub folders and weighs some gigs) through wifi or USB ( and not using cloud services) between my New Ipad and Win 7 PC? Any apps available?
kindly suggest a solution.
Thank you inadvance!

You can only import photos/videos via USB and the camera connection kit.
ITunes: Syncing media content to your iOS devices
http://support.apple.com/kb/ht1351
 Cheers, Tom

Data Transfer Between HR and Erec

Hi all,
We are using having 2 backend systems 1 for HR other than Erec and another one for erec.
Now we have setup the ALE data transfer using Message type HRMD_ABA.
In erec we have only ERECRUIT Component deployed in backend,no EA HR or SAP HR component deployed.
MEaning no PA* tables.
Now when Transfer personnel number(HR!001-A008 with Position) to erec box,it says no pernr exist.
Howver i cannot tranfer the pernr from ECC to Erec as we dont have PA* tables in Erec.
Can you share me the object types that are transferred from ECC to EREc and EREC and ECC.
What are the components to be deployed in backend Erec box.
In Portal for requistions application which should backend(System Object) and for recruiter and recruitment admin applications which should be the backend system(System Object).
Thanks,
Nachy

Hi ,
1) First get your users created with roles in your Erec system
Example recruiter ,Manager ,Recruitment Admin
2) Get your Structure created in your HR back end system .
3)Make sure you maintain your basic Infotypes with 0105 miantained (System user name /Email id )
Assign the user to 0105 subtype 0001
4)ALE that you have setup first move Org structure moved
next move the person (Pers no ) .
ALE chose the insert mode and goto WE10 if yoru IDOCS are clean without errors .
Make sure all the personal data including address ,postal code is all maintained .
Let me knwo if it helps
Regards
Santosh

Data sharing between OSX and WinXP/Vista partition in boot camp

Due to software and external hardware issues, i need to revert back to an XP/Vista setup but would like to keep 1 computer to minimise having multiple copies/versions of data e.g. music, video, photos and office related docs.
If i perform a boot camp install, will the following scenarios work?
1) Have 1 large OSX partition which will store all my data. Will WinXP be able to read/write/delete data on the OSX partition
2) Have 1 large WinXP partition which will store all my data. Will OSX be able to read/write/delete data on the WinXP partition (Assuming i have the NTFS-3g software installed)
3) Have 1 (for arguments sake) 30GB OSX, 1 30GB WinXP and a third partition formatted as NTFS to hold my data.
Scenario 3 would appear to be the most sensible option as it keeps data away from the OSess so if i loose one, the data will be intact regardless.
Which brings me to my final question:
If i have to reinstall OSX, would i loose the WinXP partition in the process?
Many thanks!

Along with MacFUSE, take a look at MacDrive7 for Windows to read/write to HFS Extended volumes.
WinClone to backup Windows XP/Vista
Reinstall or restore? either way, and you really should never need to reinstall if you take an hour to backup (clone) or use TimeMachine (or combination of both).
I think Boot Camp Assistant is far too much of one-way only in not allowing or supporting more than one partition for OS X and one for Windows.
You can shrink OS X volume and create a partition out of free space. Or you can shrink Windows Vista (probably XP also) and partition that (but that can confuse OS X startup disk or boot manager "Option key.").
MacFUSE has had the side effect of making "Windows" volume not show up in OS X Startup Disk also.
I'd say MacDrive7 is your best bet without requiring an external drive (but do have one or two for your backups).

Data Transfer - eMac (OSX 10.3.9) to eMac (OSX 10.4)

Am in a predicament I hope someone can help me with. The eMac (#1) referred to below belongs to my brother. I am trying to get data from his eMac #1, transfered on another eMac (#2), that I bought to replace his eMac. Since I'm not a Mac user myself, I'm a bit lacking in knowledge on how to best get the process done.
Here's the situation:
Have my brothers 1.25 GHz eMac(#1) with OSX v 10.3.9 installed. The CRT on this eMac has gone bad. I bought an adapter to allow me to connect an external PC LCD, and now video can be seen. Problem is, eMac #1 will shut down for no apparent reason after 5-10 minutes of use.
I bought a 1.42GHz eMac (#2) with OSX 10.4 installed. I plaln to give this eMac to my brother to replace his sick one, ... IF I can get all of his data successfully transfered onto this newer eMac. I bought a firewire to firewire cord so I can use it to try transfering the data, but can't figure out what steps to take to get the job done.
Ideally, ... I think if it's possible to clone the drive from eMac #1, then install the clone onto eMac #2, that would work great. I assume once the clone has been installed on eMac #2, there might be a way to upgrade OSX 10.3.9 to one of the OSX 10.4 versions. Hope I've explained the situation clear enough to get some help getting things done the right way.
disaksen

Like roam says, if you can keep the first (sick) eMac up for an extended period of time by disconnecting the display then FireWire Target Disk mode is ideal, no display needed on the sick eMac.
I WOULD have suggested just swapping the hard disks over, but the newer 1.42GHz eMac requires OSX 10.4 as a minimum.
Did it come with it's original discs (CDs or DVDs) ?
Then you may be able to swap the hard disks, start it up of the Install CD/DVD and install OSX 10.4.
Was the disk in the sick eMac partitioned in any way ? I just have something nagging in the back of my mind that says only the first partition of the first hard disk can be shared in FireWire Target Disk mode.
There are other possibilities, but all depend on getting the sick eMac to stay available for an extended period of time, perhaps 2 hours, perhaps overnight. We're all hoping that running it without display achieves this.
Was the original eMac dropped ? Just check that the RAM is still correctly seated.
One one piece of good news is that once the data transfer is complete, you can salvage any RAM from the 1.25GHz eMac and use it in the new 1.42GHzz eMac. There's only 2 RAM slots but you may be able to find 2 512MB sticks between the two of them.

I am looking for a fool-proof way to share files between Mac 10.6 and Win 7

I need to share files BOTH WAYS between Mac OS 10.6 (latest rev - 10.6.3 at the time of this post) and Windows 7 Premium. Both computers are on a private network and both are on the same workgroup.
I followed this tutorial:
http://macs.about.com/od/filesharing/ss/file-sharing-with-snow-leopard-win7.htm
and I got part of the way there. This tutorial shows me how to set up sharing using the "Sharing" pref pane. I set up a few folders for sharing to specific users (me) from the PC. I set permissions properly, and enabled SMB. Everything was by the book (I have shared between XP and older macs in the past, this is not totally new to me).
For some reason, my Win 7 box is only able to see my public folder. I can set that folder (using the sharing panel in OSX) to read and write, so I can move files to and from it in Win7, but none of the other folders I shared on my Mac are available in Win7.
I am accessing my shares in Win7 like this:
\\192.168.123.130\Desktop
that's my Mac's static IP and then the Desktop is one of my shared folders on the Mac.
When I type that, I get an error in Win7 that says that folder is not accessible, and that I may not have permission. I am not prompted for a username/password at any point in the process.
the only way I am able to access the Mac's public folder is because I type "\\192.168.123.130" in Windows 7 and I am presented with a list of shared printers on my Mac and then the public folder. My other Mac shares are not listed there.
What am I doing wrong?
Oh, one more thing. Is there a good tutorial anywhere for sharing Win7 folders to my Mac? All the ones I have found are not working.
God, I really hate Windows sometimes.
Thanks
-----------S

LAN Manager authentication level was already set to "Send LM & NTLM - use NTLMv2 session security if negotiated" according to a web tutorial. I changed it to the option you recommended above.
Still, only the public folder is visible.
By the way - this is a brand new install of Windows 7. Almost nothing has been altered from its stock just-installed state.
It is connected to my Mac via a cat-6 ethernet cable which is plugged into my Mac Pro's second ethernet port. I did this because the PC is a Maya workstation, and I do not want to slow it down by installing all of our corporation's IT-required software that slows our systems down. It is not connected to the open internet in any way - just file sharing to my Mac.
My Mac is 192.168.123.130, the Win7 box is 192.168.123.132. Both have a subnet of 255.255.255.0 and a gateway of 192.168.123.130. I am UNABLE to ping the PC from the Mac. I am ABLE to ping the Mac from the PC.
Message was edited by: Steve Dorsey

Data discrapancy between queries in SAP and BW

Hi All,
I have a problem in data discrapancy between the queries in SAP R/3 and BW Queries .can any one please tell me how to investigate this kind of problems and how to fetch this data ,
please help me ASAP this is an urgent issue
and how many ways we can investigate this kind of issues ,please send me some steps .......
Thanks
Tom

Hi Tom,
You can proceed in a step by step fashion when trying to match the BW query data with that in R/3 reports.
. Try to check the filters and calculations applied in the BW query. You can create a very basic query if required.
. If this does not work then try using transaction LISTCUBE so that you can directly see the data in the InfoCube as per your chosen selections.
. If this doesn't yield anything, then look at the way data is being processed: Any code in the Start routines, Update or Transfer rules. Check them for correctness.
. If you loaded through the PSA, you can also check data in the PSA. Or you can also check the data extracted using RSA3 in the R/3 system.
. Try to provide us some more specifics about the data that you are trying to match. Which module is it? Which is the datasource?
Hope this helps...

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

Stock transfer between plants without STO and storage locations

Hi.
In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer from unrestricted to unrestricted.
Is there any reason for this?

Hi
Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
Regards,
Vivek Swarnapuri

Data transfer between datbases?

Hi,
Here's my question:
I have 2 databases.DB1 and DB2.I have 1 table in each with the same name and same structure .Lets say the table name is "STUDENT".Student table in DB1 has 100 rows in it.Now useing SQL ,i want the Student table in DB2 to contain the same data as the data contained in Student table in DB1.
How can i use an insert with a select statement to accomplish the above task.
Suggestions appreciated.
Thanks,
Aparna.
null

You'll need to define a database link between the two DBs and a synonym.
Then you just do :
Insert into student(columns,...) Select * from db2.student;
The key is the database link

Data transfer between OSX 10.9 and WIN 7 stops

Similar Messages

Maybe you are looking for