Data transfer fm bb9900 to Q10 using BB Protect

Dear All!
Yesterday my BB 9900 was damaged beyond repair. All information in it is lost. The only place where there is a backup of the info from the phone is BlackBerry Protect. Today I bought a new Q10. It registered to the same user in BB Protect. I thought it could be transferred to the stored copy info from the old (BB 9900) to the new (Q10) by BB Protect. Is it possible and how to do it?
Regards!
Nikolay

I don't think it can be done like this. You need to restore to a 9900. Then connect the 9900 to BB Link and transfer it to the Q10.
Blackberry Engineering in Switzerland - Dexion Services AG

Similar Messages

  • Error in Configuring Data Transfer From EMS to BAM using JMS

    Hi,
    Hi i am trying to import data from database into BAM dataobjects using JMS.
    I am able to get the data in JMS queue, but hav problem configuring BAM.
    After modifying the 2 xml files on BAM server and after making required changes on adminsrator on BAM console (Changing paths of jar files),
    I have to import some OBAM Artifacts. Refer
    - To import Oracle BAM artifacts needed for BAM server, perform the following steps,
    Copy $ORACLE_HOME/sysman/bam/emsys_all.xml into the BAM machine.
    Can anyone guide me to where can i get this file emsys_all.xml. I am not bale to locate it on my BAM server.

    Hi,
    The file that you referred to emsys_all.xml is for integrating BAM and Enterprise Manager
    More details on that can be found in
    Oracle® Enterprise Manager Management Connectors Integration Guide -
    http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/em_de.pdf
    However this is not required for EMS working, take a look at this document,
    http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_Configurefor1013OC4J.pdf
    that gives the steps for EMS.
    Thanks
    Ranga

  • Data transfer from mac to pc using ipod

    I need to transfer some data files from my MacBook to my PC using my 30GB ipod. I get all the files copied onto my ipod from my mac with no problems. I have my ipod set to be used in disk mode.
    Once I plug it into my pc, it tells me that I need to format the drive. How can I successfully transfer data from my mac to my pc using my 30GB ipod?
    Someone told me to go ahead and format the drive/ipod on my pc and then plug it into my mac, place the files in the ipod and then I should be able to access the files having the ipod plugged into my pc. I started to try this, but it messes up my ipod to where I need to reset my ipod to factory settings using, my macbook.
    Would it be possible to reset my ipod to factory settings using itunes on my pc and then try plug the ipod into my macbook and copy the files over that way?
    Please let me know what you have found out. I need to backup all my files and get them on to a second computer. I have 25GB worth of home videos that makes it so that I need to use my ipod, other wise another device would do the trick.

    eternalfam wrote:
    Would it be possible to reset my ipod to factory settings using itunes on my pc and then try plug the ipod into my macbook and copy the files over that way?
    Yes. In fact, I'm pretty sure that's what you were supposed to do in the first place. The wonderful thing about OS X: It'll speak HFS+, FAT32, and it'll even understand NTFS (but it can't write to it... yet). Oddest thing: XBox 360 will read HFS+, but WinXP/Vista won't... curious, isn't it?

  • Data transfer of Selected sets (QS51) using Function modules

    Hi All,
    I am doing data migration of Selected sets (TCODE QS51) using function module. I have tried using BDC recording but it is not working in background.In foreground it is giving information error on second screen as field  RQSKT-AUSWAHLMGE is not present on screen 1000..  In foreground I am pressing enter after this error its working fine but in background the execution stops there. So I am trying function modules QPAM_SELSET_CODE_CREATE  and QPAM_SELECTED_SET_CREATE
    The fields in template I have are KATALOGART(Catalog), WERKS(Plant),AUSWAHLMGE(Selected set) ,KTX01(short text), STATUS(status),CODEGRUPPE(code group), CODE (code), KURZTEXT (short text for codegroup),BEWERTUNG(Valuation code), FEHLKLASSE(Defect class)
    QPAM_SELSET_CODE_CREATE contains fields  KATALOGART, WERKS,AUSWAHLMGE ,CODEGRUPPE,CODE which I need and While stand alone testing of this function module I am geting error as follows with the data filled :
    Runtime:        6.496 Microseconds
    Exception       WRONG_KEY
    Message ID:          QS                         Message number:           299
    Message:
    No entries were found in catalog 1
    MAN WERK K AUSWAHLM CODEGRUP CODE
    300 WI10 1 DDTEST   THREADS  1
    QPAM_SELECTED_SET_CREATE contains KATALOGART , WERKS,AUSWAHLMGE , KTX01 which I need and it requires Language key fiels KSP01. I specified it it executes successfully but in transaction it is not there. some FMs contain some fields and not all fields so I want to know which one to use ? Can anyone give me sample code how to use these FMs?

    Note 381286 - Code grps + selectd sets:Transport request requestd
    Note 592418 - Composite SAP note: Transport of code groups and codes
    But I do not recommend a modification because the system does not generate request for that in the production system.
    This means you can maintain catalog directly without transport in the production system.
    Only development or test system ask you a request number.
    Regards
    Luke

  • Data transfer from RT to FPGA using DMA FIFO

    Hello all,
    My question is "How do you stream data from RT target to FPGA target using DMA FIFOs?"
    I would like to control some indicators (or controls) in FPGA vi using controls in the RT vi using DMA FIFO.
    I have used four controls in my RT vi, but I get only one indicator out on my FPGA vi. (I would actually like to use some controls on the FPGA target using controls on the RT target)
    Is this possible?
    Can anyone help me with this?
    I have attached my vi s. 
    Attachments:
    fpgatest.vi ‏28 KB
    rt_test.vi ‏73 KB

    Based purely on your example, I see two options:
    1. Do as RavensFan suggests and use Boolean Array To Number to send a single number down to the FPGA.  Your FPGA can break up the number easily enough to update the indicators.
    2. Just write dirctly to the indicators.  I do not see a need for the DMA.  Again, based purely on your example.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Data transfer from BW to CRM using infospoke.

    Dear All,
    I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
    These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
    Can someone help here ?
    Thanks,
    Mukund.

    Dear All,
    I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
    These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
    Can someone help here ?
    Thanks,
    Mukund.

  • Asset Legacy data transfer reconciliation with GL

    We have recently merged a deactivated company code with our operating company and transferred all Finance processes, open items,master data etc.
    We transferred assets using Legacy Data Transfer AB91 (we did not use intercompany asset transfer ABT1N).
    We then transferred the Trial Balance.
    The asset balances reconcile against the GL accounts for the transferred assets when executing S_ALR_87011964 and FS10N.
    However there is a difference in ABST2 which is the same difference as the migrated assets.
    I would expect there to be no difference between FI and AA for legacy data transfer
    I have also run ABST for all affected GL accounts and there is no difference when executing this report.
    Note that the company code migration occurred in January 2008, there is no effect on 2007 year end data.

    Hi
    You have to take over the GL  balance using OASV t.code
    regards
    Sibichan

  • Data Transfer Erec and ECC HR

    Hi all,
    We are using having 2 backend systems 1 for HR other than Erec and another one for erec.
    Now we have setup the ALE data transfer using Message type HRMD_ABA.
    In erec we have only ERECRUIT Component deployed in backend,no EA HR or SAP HR component deployed.
    MEaning no PA* tables.
    Now when Transfer personnel number(HR!001-A008 with Position) to erec box,it says no pernr exist.
    Howver i cannot tranfer the pernr from ECC to Erec as we dont have PA* tables in Erec.
    Can you share me the object types that are transferred from ECC to EREc and EREC and ECC.
    What are the components to be deployed in backend Erec box.
    In Portal for requistions application which should backend(System Object) and for recruiter and recruitment admin applications which should be the backend system(System Object).
    Thanks,
    Nachy

    Hi,
    Check the link :
    http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm
    Supported infotypes for transfering data from the E-Recruiting to the HR-System are the PA infotypes 0,1,2 and 6. There are 15 fields sent to pa48 if they were filled in the E-Recruiting system, which are
    - forename, initials, surname
    - gender
    - birth date
    - correspondance language
    - address (street, city, streetcode, region, country)
    - hiring date
    - organisation unit
    - position
    - personel number (for internal candidates)
    So these are the infotypes which can be transfered automatically and cause no problems. If you want the "title" to be transferred additionally, you have to adjust the  system behaviour accordingly.
    To set up data transfer,
    In E-Rec System, use Tcode - BD64 Partner Type LS - Generate partner profile for the ECC System
    Use Tcode - WE20 for the Partner profiles checking
    For ECC Partner Profile, Give Outbound parameters - Messahge type HRMD_ABA and SYNCH. Give Inbound parameters- Message Type HRMD_ABA
    In ECC system, use BD64 for the Partner Type LS. Partner Type LS - Generate partner profile for theCreate Erec System(
    Use Tcode - WE20 for the Partner profiles checking
    For E-Rec Partner Profile  , Give Outbound parameters - Messahge type HRMD_ABA and SYNCH. Give Inbound parameters- Message Type HRMD_ABA
    After doing data transfer using RHALEINI, use transaction SM58 to check whether the data has been transferred or not.
    Hope it helps!
    Arpita

  • Data transfer with IDoc

    Hi All,
    Can any one please explain me about "Data transfer with IDoc".

    Dear Prasad,
    Using the IDoc option , you will not have a staging in BW like PSA were you can do corrections if required,
    We can use IDOC option when we are very sure that data we are loading is error free,
    and in older versions we are forced to use only IDOC option when doing hierarchy loads and its ruled out now,
    Data transfer with IDoc
    The data is packed into IDocs by the source system and sent to the Business Information Warehouse. In BW your data is saved persistently and intransparently in the IDoc store. From there the IDocs can be updated in the IDocs manually or automatically.
    It is used for hierarchies load Limitations with IDoc is:
    transfer structure must not have more than 1000 Bytes in the character format.
    If it is a critical data we can use IDocs it can't be modified here. In case the load fails we need to load data from source system.
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
    Hope this helps u..
    Best Regards,
    VVenkat.
    Edited by: Venkata Narayana Jakkampudi on Dec 23, 2008 12:03 PM

  • New Hire Data Transfer from E-Rec to ECC via PA48

    Hi,
    We have requirement where we need to use the basic new hire data transfer from erec to ecc using PA48.
    Could someone help me by listing the step by step process that is required to configure in both EREC & ECC?
    I know there is pdf document available online but that refers mostly to XI which we are not planning to use.
    Please help.
    Regards,
    Vikram

    Hi,
    For integration between E-Rec and ECC, check [Link|http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm]
    This gives detailed information on synchronous and asynchronous data transfers between E-Rec and ECC.
    Hope it helps!
    Arpita

  • DTP (Data Transfer Process)

    Hi, I would like to know more about DTP (Data Transfer Process), how can i use it to replace infosources, transfer rules and update rules in just one transformation.
    I will be very grateful for your comments and your help...
    Thanks and regards!

    hi,
    You use the data transfer process (DTP) to transfer data within BI from a persistent object to another object in accordance with certain transformations and filters
    It is like a replacement of the info packages in the olderr versions.
    Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
    youu can refer to this link for mor infos.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    hope it helps..

  • RE: Transformation and Data transfer process.

    Hi guys,
    Please some bosy help me out by providing the differences between Transformation and Data Transfer Process.
    thanks in adwance
    omkar

    Hi Omkar,
       Trnasformations providing the mapping between Sorce fields( datasource to  data target).  only map the structures..
    <b>Transformations:</b>----
    -->Trsnsformations are used to create mappings between two BI Objects and to
    transform data from BI Source(From where) to BI Target .
    -->You can create One-One Mappings between source and target in BI
    -->In transformations Source is : DataSource, InfoSource, DataStore object,
    InfoCube, InfoObject and InfoSet
    -->Target is: InfoSource, InfoObject, DataStore object and InfoCube.
    -->Transformations replaces the transfer and update rules.It's like creating transfer
    rules and update rules.Through these rules/mappings/transformations, the
    system is going to transform data from Source to Target.
      but DTP  means.. the data loading procedure will be  done with this step..
    <b>DTP :</b>
       DTP is used to transfer data from PSA to the infoprovider.
    The data transfer process can also be used to control data distribution from a BI system into any target outside of the BI system. For this purpose, a data transfer process with an open hub destination is used as the target.
           Since Deltas are now based on request from PSA ,you can have multiple datatargets pulling data with same selection criteria from same datasource(ECC) with INITS/DELTA,not possible earlier.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    Creating DTP
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
    regards
    @jay

  • E90 on data transfer mode.

    hi
    i am trying to connect my E90 to the PC via data transfer mode but i get the message saying "Unable to activate data transfer mode. memory is being used by another application" when i check, i have no applications running. Kindly help..!!!
    Solved!
    Go to Solution.

    If you have installed 3rd party themes to your memory card, and then choose to use one of these, this will possibly trigger the error message that you are seeing...
    Steve at AAS recommends installing themes to the phone memory and not to the memory card...

  • ISSUE:regarding production version tab of MRP4 of  data transfer using BD10

    Hi all,
    This is regarding production version tab of MRP4 of  data transfer using ALE idoc (BD10).
    When i transfer the data using BD10 the production version is received at receiving end through segment
    but not created in MRP4 view tab.An error is coming as-
    "You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
    I logged in as-EBGABAP
    Please help me resolve the issue.
    Thanks
    Edited by: sanu debu on May 6, 2009 11:08 AM
    Edited by: sanu debu on May 6, 2009 11:09 AM
    Edited by: sanu debu on May 6, 2009 11:11 AM

    >
    sanu debu wrote:
    > Hi,
    > I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    >
    > Thanks.
    >
    > Edited by: sanu debu on May 6, 2009 3:24 PM
    BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

  • Time Capsule only runs with 1,1Mbit up/down during data transfer, internet speed is ok, TC is used to extend an existing network

    Hello Everyone,
    I have a new 2TB Time Capsule running with a MacBook Air. I want to use the TC to access data (Aperture library, iTunes library, other Files) and to backup my MacBook Air via Time Machine. I set it up, integrated the TC in my Network (FritzBox) by choosing "extend existing network" and it works. BUT only with 1.1Mbit/second while writing or reading Data to/from it. Internet speed is very good, like it was before. While the 1.1Mbit/second seem to be ok with Aperture and iTunes (streaming music and movies) it is still painfully slow and I'm not realy happy with that
    I've read that:
    The 1.1Mbit problem is pretty common when Time Capsule is integrated and used to extend a network (bridge modus), it also looses all ethernet connectivity then (that woul explain why connecting it by ethernet didn't help during initial setup and data transfer)
    Is there a solution besides ditching the Fritzbox and using the TC to build the network? Because basicly I still need the Fritzbox for its DECT features.
    Thank you for any help in advance and have a nice day,
    Olli

    You have double hop wireless with this setup..
    You should bridge the TC.. that is router bridge not wireless bridge, and plug the TC into the Frizyboy by ethernet.
    Then you can setup the TC wireless to reinforce the fritzy..
    Same wireless name as SSID.
    Same security settings... really should be WPA2 AES or in TC personal.
    Same password..
    Just different wireless channel.
    Then you can use 5ghz on the TC if you are up close and personal.

Maybe you are looking for