Data Transfer Icon

Hi must have switched on Mobile Data by Mistake while using Maps and now I can get rid of this symbol
A GPRS Data connection is opening or closing "Can not Paste Picture "
I have powered down Phone and still same plus been on to wif_Fi and opened maps and closed plus used off line still same
I am on O2 in UK is suspect it is a carrier issue as when powered down does not come on till network appeares Nokia 701 FP2
How can I get rid of it
Thanks
Nokia 701 Helping with Lumia 800

Have you tried restoring the phone back to its default settings? This should not delete any personal data on the phone:
Select > Settings and Phone > Phone management > Factory settings >
Restore.

Similar Messages

Not able to connect N82 to pc in data transfer mod...

I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
Thank you for your support.
mlhpr
Solved!
Go to Solution.

22-Mar-2008 02:51 PM
scoobyman wrote:
Hi mlhpr
If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
:I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
mlhpr

Data Transfer Process and Delete Overlapping Requests

Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
Scott

Hi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks

6301 & PC Suite - "Data transfer not possible. Che...

Well, as the title says really.
Upgraded from 6280 -> 6301.
I use Outlook 2003 and sync contacts & calendar.
Sync'd the 6280 before finalising upgrade, plugged in the 6301 with a mini-usb cable (All driver reports it installed new hardware fine) once it had fully come into service and it wouldn't sync.
The phone displays "Data transfer not possible. Check connection" and Nokia PC Sync shows the warning "The mobile phone as not responded". It's solution is "Please ensure your phone is in the standby mode, then restart the Synchronisation. "
Have updated to latest version of PC Suite 6.85.
A bit annoying, as I no longer have any contacts info on the new phone...
Running XP, AMD 3ghz, 4gb ram.

Having spent many hours on this I have now got it working...
This is how :
1. On the phone go to : Settings: Sync and Backup: Server Sync: PC Syncronisation and enter a username and password.
2. Select Synchronise in Nokia PC Suite, in the Connected to 6301 window click the spanner (settings) icon. Now click the Adjustable wrench (Advanced) Icon and go to the sync profile tab and enter the same username and password that you used on the phone. Click OK twice and sync away...
Message Edited by kage64 on 05-May-2008 11:04 PM

GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song". Please Help!

I recently had a data transfer from my older mac to my newer one. After the transfer I logged into my new account and opened up my GarageBand. It worked perfectly fine, however when I logged into my old account with all my older data that I just transferred over, I could not open my GarageBand files and there is an error that states "GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song".If anyone could please help me with this issue, I'd greatly appreciate it. Thank You!

When you transferred your data from your old mac, you may have accidentally transferred an older GarageBand version and either overwritten your newer version, or your old account still has the old GarageBand icon in the Dock.
Search with SpotLight, if you have more than one Garageband version on your new Mac (type "GarageBand" into the SpotLight search field). Does it list more than one GarageBand version? Then delete the older GarageBand.app.
What GarageBand version have you been using at your old mac, and what is the version on your new mac? If it has been bought recently, it should have come with GarageBand '11.
Regards
Léonie

International- Data Transfer

Be careful about using your phone for data transfer in Europe! I Just got back from a 2-week trip to Europe with my family of four- we all brought our iPhones. I had international roaming- World Traveller- turned on before we left. I was told that phone calls would be $1.99 per minute and data transfer (Internet, email, etc.) would be unlimited because we already pay the $20 for that. It turns out it is NOT unlimited. We just got a bill for $3700. AT&T has agreed they told us wrong and they will credit our data usage charges but I'm still not sure it is really going to happen. They have since instituted a new plan something like this: International Data Transfer is about $20 per month for about 15mb of data. But there is a 1 year commitment for this plan. Hopefully, they will revise this plan to something more useful.

Yesterday afternoon the advice I received from AT&T was to call and have the data part of the phone turned off while traveling. That would, I was told, keep me from getting a big bill. This morning I telephoned again to ask about wi fi, and was told, essentially, that if wi fi is free where I am, there would be no charge for web browsing or reading and sending email. Also, I was told that the advice I received yesterday was incorrect. The way to keep from getting the data charges that are very large is to go to mail settings and for each account, to turn it "off." That way the phone will not look for email. Presumably not clicking the Safari icon is a part of this plan. So the work around today sounds like it is to use free wi fi if you can find it.

Data Transfer: 701 - Lumia 925

Hello there, I am contemplating buying a Lumia 925. At the moment, I have a Nokia 701. Using Nokia Data Transfer on the 925, can anyone tell me if it's possible to transfer my text messages to the Lumia? I tried the latest version of Nokia's data transfer app on a 820 and for some reason transfering text messages was unfortunately not available. Is there a chance it could work on a 925? Or does it not work with the 701 S^3? I need to know this before I make the purchase. Thanks in advance!

It does..
Transfer my Data is a quick and easy way of copying contacts from almost any phone (Symbian, Android, iOS, BlackBerry, Windows Phone and others) to your new Windows Phone using Bluetooth. Some phones may also be capable of transferring text messages and pictures, including many Nokia phones. Transfer my Data copies all your contacts into the Windows Phone People Hub, from where it’s easy to call, mail, chat or follow friends on your favorite social network. On supported phones, contacts and messages can also be transferred to and from an SD card.
What’s new?
- Transferring text and MMS messages to and from an SD card
- Bug fixes
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Init with out data transfer option is not enabled

Hi Friends,
I am loading data from the data soruce 0CO_OM_OPA_7 - (Internal order items) into BI. This datasoruce is delta enabled. Flow is designed in 3.5. I checked the extractor RSA3, it shows 9 records and then i tried to load using init with data transfer, the load is not successful, it is in yellow for long time and gives the messages no record found. I tried with full load then load is successful. why init load is not successful? Is there any setting i am missing here?
Then I tried to go other option, run init without data transfer and then a full load, but I could not change the radio button to without data transfer option, it is defaultly taken init with data transfer and greyed out. How can i check init without transfer option?
thanks in advance.
Regards
Sreekanth

Hi,
In the present case you need to delete the earlier initialization flag from infopackage. Once done then you can be able to view the init without data transfer option.
So delete the flag in the menu bar --> Initialization option for source system
in the popup select the init entry and use the trash icon to delete the same.
Before doing that you can mark your earlier init load to Red and then perofrm this activity.
Once done then you can execute init-without transfer wiht no issue.
Once after this you can perform repair full load to load the data to your target.
Hope this helps.
Murali

Data transfer from E-Reruitment to SAP in the intigrated system

Dear all,
iam working on E-Recruitment project with intigrated system ( e-rec & SAP same instance)
in E-Rec i performed Applicant Acctivity ( Data tranfer for new employee)
but there is no entry in t752f table.
and please tell me exactly what data will transfer to sap automatically.
if i want to transfer all the data do i need any developments.
Pls suggest me as early as posible.
Regards
ushamohan11

Hi,
In Applicant Acctivity ( Data tranfer for new employee) will help you to get ready for the transfer.
Goto pa40 and click on Hire Applicant (ACTION) and click on Transfer Icon on your left side of the screen.
plz update me the status of it ..
All the Best
KRC

Turn off data transfer?

Hi,
We have a very strict data plan in NZ. 250 MB month... I want to ensure no data can be transferred at times (esp if I reach my limit). How can I switch off all data transfer so I don't get hammered at the end of my billing month?
Thanks,
Scott

The only way for sure is to put the phone into Airplane mode, but then no phone calls either.
There is no setting to disable data only on the iPhone. All you can do is manual - don't open safari, email, maps. Maybe move those icons to a different screen and periodically check you data usage through the carrier and the iPhone settings screen.

Apple Store did Data Transfer to new Mach. Do I need to do Boot Camp all over again to run my Paralles/Windows?

HI.
In May, I used Boot Camp to partition my MacBookPro and then installed Parallels and Windows. Worked great!
Two weeks later my MBP died.
In order to save my students projects which I'd saved that week on my book (yup, without backing up daily) they did a data transfer for me to my new MBP and I left the store without crying over lost work!
Now however, when I click on my Paralles Icon it won't work. I get this:
I'm not sure what to do or how to get this working again!

no you did not do it throught boot camp
boot camp is when you start up your computer and hold down option and choose for it to not start osx at all but start windows insted
what you were doing was running virutal machine using parallel which just happened to rather then load it image from a file read it from the boot camp parition
unless you ever held down the option key and started windows windows without osx
then you have always run it as a virtuel machine just from a location which was skipped by your backup system
so you kinda cheated yourself first of all then it's more trouble to install windows under bootcamp then in a virtual machine
and when in bootcamp then as you've seen is not a part of a backup
read more here
https://discussions.apple.com/docs/DOC-3321

How to find the max data transfer rate(disk speed) supported by mobo?

I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

ISSUE:regarding production version tab of MRP4 of data transfer using BD10

Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM

>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

Bottleneck in Data Transfer

We run a small network in our office consisting mainly of Intel iMacs we purchased several months ago. The server computer is a brand new Intel Mac Pro server with 4 500 gig drives raided together, two 2.66GHz dual core intel processors, all the other bells and whistles we could think of, etc. We added in two fiber-optic switches: one in the server room, one in the office. The switches connect to each other and the server with fiber optic cables, but the iMacs connect with ethernet cables.
We had the iMacs for a while but we just recently got the new server and upgraded our old 100 base switches. Afterwards we wanted to test out the data transfer speeds, as we plan to back up to the server frequently. We were dismayed to find that transfer rates capped out at 60 MegaBytes/sec according to the Activity Monitor's Network Activity tab. In fact, it would range mostly from 40-45MB/sec. None of us here have much experience with networking, but that seemed a tad too slow. My basic math tells me that a byte is 8 bits, and from that a Gigabit network should transfer data at 120 MegaBytes/sec, which is three times the speeds we were actually seeing.
We sent data both to and from the server in order to test this. Thinking it was perhaps a problem with the ethernet itself, we grabbed an external FireWire hard drive and transferred data from one of the iMacs directly to it and noticed exactly the same transfer rates. We plugged two iMacs directly into each other and transferred at the same rate, ~45MB/sec.
Well this was highly frustrating. All Macs supposedly ship with Gigabit ethernet since, what, 2002? Earlier? Why are our speeds so slow? We thought the hard drives might be slow, so we got info on the drives and googled them for their tech specs. The iMacs' Western Digital drives are capable of much much faster speeds according to everything we've read.
We started reading anything we could online that addressed this issue. Some information read the problem might be that the optical DVD-R/CD-R drive was only capable of slower transfer speeds. Since the optical drive and the hard drive are on the same bus it would slow down the hard drive's maximum transfer rate, much like having a Gigabit hub with a 10 base computer plugged into it would slow the entire network down (which is of course why we use switches instead of hubs). Is there any truth to this? If this is, in fact, the case, can we bypass this bottleneck somehow? I'm not talking about opening the computer and manually disabling the optical drive, as that's a waste of a perfectly good DVD-R/CD-R drive.
Also, if this is true, why in blue blazes is Apple flaunting Gigabit ethernet if the computer can only take advantage of 1/3 the speeds Gigabit ethernet has to offer?! I'll happily provide any more information that's relevant to the problem at hand.
Thank you
Mac OS X (10.4.8)

Here's the specs for the default Hard Drive that Apple put in here:
http://www.westerndigital.com/en/products/Products.asp?DriveID=137
From that page
Buffer To Host (Serial ATA) 300 MB/s (Max)
Buffer To Disk 748 Mbits/s (Max)
I have no idea what signaling overhead for my data transfer protocol means.
The ethernet cords are no longer than 20 feet, are all Cat5E, and are well shielded. There is little to no ElectroMagnetic interference in any area they run. The longest cable is the Fiber Optic one, which runs about... oh... 40 yards? These were all installed by professionals.
I feel it's important to stress the fact that we tested an isolated direct computer to computer transfer with a single 6 foot Cat5E Ethernet cable and still experienced the same speeds that we experienced over the network. We tested multiple computers, multiple cables, multiple files.

Issues with data transfer / connectivity

Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
Thanks

You can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com

Data Transfer Icon

Similar Messages

Maybe you are looking for