Data Transfer Issue from R/3 Prod to BW Prd

Hello All,
We have recently connected our BW PRD system to R/3 PRD system.
During data transfer its giving an Message " Error Opening an RFC Connection"
So we have to go to the Transact RFC mode & Forcefully transfer the data.
we have given below profiles to the ALEREMOTE & BIWREMOTE users in R/3 & BW
SAP_ALL, SAP_NEW, S_BI-WHM_RFC, S_BI-WX_RFC, S_RS_ALL
Any thing is missing, please let us know
Regards
Lalan

Hi,
If you are using SAP R/3 Plug-In 2004.1
For BIWREMOTE profile S_BI-WHM_RFC (Business Information Warehouse, RFC user in the Warehouse) is sufficient to extract the data.
For ALEREMOTE profile SAP_ALL covers all authorizations.
Check following configurations for both systems
RFC connections
ALE settings
Partner profiles
Port
IDoc types
IDoc segments
BW settings
All the above configuration is fine, still you are facing same problem check the OSS note: 150315
Regards,
RC

Similar Messages

ALE Data Transfer Issue--Needs Immediate Attention

Hello Gurus
I am hoping somebody can guide me here--
We are on E-Rec 603 with seperated standlone e-rec system.
we have set up ALE Data transfer for object type P from ECC QA to E-Rec QA system but unfortunately the I-Doc is always gettign posted with status 52 ( application document not fully posted).
The infotypes 0000,0001,0002,0006 and 0105 are being transferred. The report HRALXYSNC refuses to recognise the 'P' object transferred and says=='data not found for search condition'.
We debugged HRALXSYNC and found that IT 0003 needs to be included but we tried transferring that too--however, the ALE still fails to transfer the data.
Not sure why the data transfer is not happening--what is the best alternative?
Would really reallly appreciate some light....!!
Thanks
Tania

Hello Tania,
first of all we should have a look on your system landscape. If you have e-recruiting on an standalone server, the server installation should only include basis components (BASIS, ABA, PI, ...) and the e-recruiting component. Running e-recruiting standalone on a server with a complete ERP installation is not officially supported up to EhP3.
Could you please check that you either have the first landscape situation or if you have installed a full ERP implemented note 1147882.
Before running some ALE at all ensure that the system works well and w/o any SLG1 entries for external candidates and internal candidates created using report RCF_CREATE_USER.
Then make sure the BAdI implemtations are set accorting to note 997181:
BAdI                    Implementation
HRALE00SPLIT_INBOUND    HR_INB_PROCESS_IDOC -> activated
HRALE00INBOUND_IDOC     HRRCF00_DELETE_SPREL -> activated
HRSYNC_P                CONV_HR_DATA_TO_EREC -> deactivated (if existing)
HRALE00INBOUND_IDOC     HRRCF00_INBD_NEWMOD -> deactivated (if existing)
For the distribution model define a filter restriction the infotypes / subtypes destributed for P to:
Infotype 0000
Infotype 0001
Infotype 0002
Infotype 0006 Subtype 0001
Infotype 0105 Subtyoes 0001, 0010
If you want to include the OM in E-rec (use positions in requisition maintenance, etc.) add a filter for Infotypes 1000 and 1001 for objects P, S, O and C (you can use the subtype to restrict relations and avoid unnecessary relations in the IDoc. P->CP relation is only necessary for EhP 4 and higher.
Make sure you use the best practise step by step descripion for the intial data transfere for EhP 3 documented in note 997181 document Two_Instance_E-REC_Integr_ERP_EN.pdf page 4, add the processing for type C after each object type S step.
Hope that helps.
Kind regards
Roman

Data migration issue from 10.2 to 9.2

Hello,
When oracle data is migrated from 9.2 to 10.2, there are new features in 10.2 like new tablespace called SYSAUX available and many new features. how to export data from 10.2 to 9.2 with manual export/import commands?? I have tried using 9.2 export utility to export data from 10.2 and imported in 9.2. But import tereminated with error sysaux tablespace not available in 9.2.
Please help.
Edited by: user2319345 on Aug 18, 2009 7:16 AM

Sorry to ask the question again...
I have exported the data from 10.2 with 9.2 exp utility and tried to import in 9.2 with imp utility.
Here i am giving full log details of imp in 9.2 . full log may give you a hint on what will be the exact problem.
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8ISO8859P1 character set and UTF8 NCHAR character set
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/ORACLE/start/base/db"
"s/sysaux/sysaux_1.dbf' SIZE 2500M EXTENT MANAGEMENT LOCAL AUTOALLOCA"
"TE ONLINE PERMANENT NOLOGGING SEGMENT SPACE MANAGEMENT AUTO"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/ORACLE/start/base/dbs/sysaux/sysaux_1.dbf'
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 13: Permission denied
IMP-00017: following statement failed with ORACLE error 28007:
"ALTER USER "SYS" IDENTIFIED BY VALUES 'E9CB42B1D98DweCD' TEMPORARY TABLESPA"
"CE "TEMP01" PROFILE "DB_DEFAULT""
IMP-00003: ORACLE error 28007 encountered
ORA-28007: the password cannot be reused
IMP-00017: following statement failed with ORACLE error 28007:
"ALTER USER "SYSTEM" IDENTIFIED BY VALUES '5A8FB62F8were8063' TEMPORARY TABLE"
"SPACE "TEMP01" PROFILE "DB_DEFAULT""
IMP-00003: ORACLE error 28007 encountered
ORA-28007: the password cannot be reused
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "ADADM" IDENTIFIED BY VALUES 'A12345wewew12' DEFAULT TABLESPACE"
" "SYSAUX" TEMPORARY TABLESPACE "TEMP01" PROFILE "DB_DEFAULT" PASSWORD EXPIR"
"E"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'SYSAUX' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "PERFSTAT" IDENTIFIED BY VALUES 'D33BCF1wewewF38D9' DEFAULT TABL"
"ESPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP01" PROFILE "DB_DEFAULT" PASSWORD"
" EXPIRE ACCOUNT LOCK"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'SYSAUX' does not exist
IMP-00017: following statement failed with ORACLE error 990:
"GRANT CREATE JOB TO "SCHEDULER_ADMIN" WITH ADMIN OPTION"
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT CREATE ANY JOB TO "SCHEDULER_ADMIN" WITH ADMIN OPTION"
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT EXECUTE ANY PROGRAM TO "SCHEDULER_ADMIN" WITH ADMIN OPTION"
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT EXECUTE ANY CLASS TO "SCHEDULER_ADMIN" WITH ADMIN OPTION"
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT MANAGE SCHEDULER TO "SCHEDULER_ADMIN" WITH ADMIN OPTION"
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT CREATE EXTERNAL JOB TO "SCHEDULER_ADMIN" WITH ADMIN OPTION"
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 1919:
"GRANT ADVISOR TO "OEM_ADVISOR""
IMP-00003: ORACLE error 1919 encountered
ORA-01919: role 'ADVISOR' does not exist
IMP-00017: following statement failed with ORACLE error 990:
"GRANT CREATE JOB TO "OEM_ADVISOR""
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT ADMINISTER SQL TUNING SET TO "OEM_ADVISOR""
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 1919:
"GRANT ADVISOR TO "OEM_MONITOR""
IMP-00003: ORACLE error 1919 encountered
ORA-01919: role 'ADVISOR' does not exist
IMP-00017: following statement failed with ORACLE error 990:
"GRANT CREATE JOB TO "OEM_MONITOR""
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 990:
"GRANT ANALYZE ANY DICTIONARY TO "OEM_MONITOR""
IMP-00003: ORACLE error 990 encountered
ORA-00990: missing or invalid privilege
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT UNLIMITED TABLESPACE TO "MWADM""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'MWADM' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT CREATE SESSION TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER SESSION TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT CREATE TABLE TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT CREATE PROCEDURE TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT CREATE SEQUENCE TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT CREATE PUBLIC SYNONYM TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT DROP PUBLIC SYNONYM TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT "DBA" TO "MWADM""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'MWADM' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT "SELECT_CATALOG_ROLE" TO "PERFSTAT""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "MWADM" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'MWADM' does not exist
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "PERFSTAT" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'PERFSTAT' does not exist
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "PERFSTAT" QUOTA UNLIMITED ON "TEST1" QUOTA UNLIMITED ON "SYSAUX"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'PERFSTAT' does not exist
. importing PERFSTAT's objects into PERFSTAT
"ALTER SESSION SET CURRENT_SCHEMA= "PERFSTAT""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully

EWM CIF Integration Model master data transfer Issue

Hi Gurus,
I am not able to transfer the master data from ERP to EWM.
When I excecute the transaction CFM1 and CFM2 integration model ,the material is not getting transferred.
I am getting the below mentioned Error message.
"Location does not exist for external location 9997, type 1040, and BSG CSSCMDEV"
Please help me in resolving this issue.
Regards
Govind

Hi,
Thanks for the reply
I had created the location 9997 for the location type 1001earlier.
When I tried to delete the location and create new Location for Location type 1040.System is not allowing me to delete.Please let me know how to delete the existing Location.
Regards
Govind

Data Extraction issue from the data source 2LIS_08TRTLP

Hi All,
We are facing one issue in time of extraction from data source 2LIS_08TRTLP(Shipment Delivery Item Data per Stage) in BW. For some out bound delivery no. Gross weight(BRGEW) is coming zero though there is value showing in the source system(ECC) in VL03 and in LIPS table. BRGEW (Gross weight) which is directly mapped in BW infosource. There is no restriction in the extraction and 0 is coming for this field in the first layer extraction.Even in the PSA all values are zero.
We have checked those delivery , delivery is being split into batch . But not the all split delivery is
giving this problem.
With Thanks
Shatadru

Yes I have done the same means I have filled setup table for those shipment no related to that delivery no and checked in the RSA 3 and required value is coming in RSA3 a. That means there is no problem in the Extractor .But I can not pull the data now in BW as it is in Production and every day delta comes .But the in the first layer ODS there is no value for that entry which was previously loaded(Though there is no routine and any restriction).
But I have one observation in the data source that particular field is in INVERSION marked in the Source. But that particular delivery for which it is giving is not canceled or returned or rejected. PGI created for that delivery and delivery status is completed for that.

Video transfer issue from iPhone

Hello!
I own iPhone 4S and iPad (3rd Generation) and regularily make video with both devices and then transfer the video to my PC via the USB cable and then play the videos in Quick Time on the PC.
Prior to updating to iOS 6 on both my iDevices on September 19, I had no problems at all. The videos transferred properly and I was able to view them on my PC in Quick Time. Today (September 25), I made a video on my iPhone 4S, transferred it to my PC the way I always have (via USB), and when I opened it in Quick Time, I just got a black screen with no audio. I then tried the same thing with my iPad (3rd Generation) and had the same results.
The videos played perfectly on the iOS devices on which they were shot.
Anybody else having these issues? What can I do to fix this?

in case you ended up on this thread via web search (as I did today),
I'll post how I solved it when it happened to me.
the issue was caused by importing 3 months of camera roll using Image Capture (I do not use iPhoto anymore).
after importing all the items, I selected them all in the Image Capture window and clicked on "delete".
a few ghost files (video only) were left behind, all of them 0 Bytes.
tried disconnecting/restarting the device but the issue persisted.
no way to delete the video references from the mac.
had to go in camera roll and manually delete them all.
using "select' on the top right you can tap them and delete after they are all checked.
hope this helps someone
u.

Data Transfer problem from cursor to table

Hi ,
         I created one Extract FM to extract data through a Datasource by RAS3. When i run the FM directly the cursor value (S_CURSOR) is displayed as 3850 and when i try to transfer using FETCH NEXT to a internal table (E_T_DATA) 498 entries populated but if i open the table all lines are blank. Pls help me. i.e. E_T_DATA[] = 498
OPEN CURSOR WITH HOLD S_CURSOR FOR
    SELECT MATNR
    FROM MARA AS A "INNER JOIN MARC AS C
    "ON A~MATNR = C~MATNR
    "INTO TABLE E_T_DATA
    WHERE MATNR IN L_R_MATNREAN
      AND MTART IN ('ZPLU','ZPAK',
                      'ZCOM','ZTIN',
                      'ZSCR','ZEXW',
                      'ZCOU','ZGVR')
      AND EAN11 = ''
      AND ATTYP = '00'.
FETCH NEXT CURSOR S_CURSOR
             APPENDING CORRESPONDING FIELDS
             OF TABLE E_T_DATA
             PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
    CLOSE CURSOR S_CURSOR.
    RAISE NO_MORE_DATA.
ENDIF.

first of all you have to put your FETCH into a DO ... ENDDO

Log & transfer issues from Canon 5D

Hey,
There's some footage shot on a Canon 5D (in H.264 format), I want to use FCP 7's log & transfer feature to convert to apple pro res. However the files are greyed out and unable to click on them. Equally as unsuccessful, I can't drag them from finder on to the log & transfer window.
The files haven't been moved since copying the data from cards (which they are no longer on) so unsure as to why they are not importing. I have tried from both an external hard drive and from a server but can't access them via FCP 7.
I can view them in preview, but not in Quicktime if this helps anyone find the root of the problem

Download and install the free 'EOS Movie Plugin E1 for FCPV1.2'
http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_ ii#DriversAndSoftware
Use the Log and Transfer to import H.264 footage form the camera or the card directly into FCP, you will have the options in the import window setting to decide what type of ProRes to convert to. Works like a charm..

Data transfer problems from PC to M125

I have been reading posts all morning and trying to sync a Palm M125 to my laptop running VISTA. I have down loaded the Palm Desktop 6.2 and HotSync Manager update and also the Pimlico Palm Hot Sync Setup but I still can not get the data to transfer. The device syncs up and appears to go through all the files and then no data. Does anyone have any suggestions?
Post relates to: Palm m125

Does anyone have any ideas about my issue? I have had this a couple years but it is brand new, I took it out of the box the day I posted this. Was hoping someone could help me get it up and running.

Data loading issue from BW Production to BW Sandbox

Hello Guys,
I am trying to load data from one info cube (Production) to another info cube (Sendbox) applying update rules for prototype model. I am not getting any error in monitoring window for Info Package. But what I see is '0 from 0 records' for long time. I have tested connection between two systems that looks O.K. There is data in Production Cube. This is first time I am loading data between two BW systems. I am not sure what could be wrong. Can some one please help me ASAP? Thanks a lot.
Export data source for that cube in production is created.
Kate

Hi Kate,
The first thing you might want to check is the status of the extractor job in your Production system. The job name will be same as the request name BI_REQU*. So, in SM37 of Production system check for the extractor job <request number> and check the status of the job. If it is running, it means that ur extraction is running still and you can wait for some more time or monitor the job closely in SM50 regarding it's progress.
If it is in cancelled state, you need to check the job log or any short dumps for the error message.
Regards,
Sree

Can I use bluetooth for data transfer to/from iPhone?

I was wondering why I cant get my iPhone Bluetooth feature to work/connect with a Razor phone...
Can I not hook up, using Bluetooth, to another phone and recieve ringtones?
Or am I not doing something right in the Bluetooth mode?
Any help would be great!!!

The iPhone's bluetooth is limited at the moment to bluetooth headsets and car kits
Even if you would succeed in pairing it you cannot transfer any type of files from it to the other phone

How do I control data transfer rate from Java applications to CGI scripts?

Hi. I've written a test cgi script which echoes any data it's sent back to the client, and I'm trying to write a java application that reads data from files on my hard drive and sends it to the cgi application.
The method I've used is the same as the one described in the tutorial on this site, ie. create an URL object, open an URLConnection, get output stream from URLConnection, write data to output stream.
The problem however is that the java application writes to the output stream at a much faster rate than my internet connection can handle, and so when I try to send more than a few kb the data doesn't seem to get sent at all. Is there some way I can control the rate at which data is sent, or is there a better way of sending data to a cgi application?
I'd really appreciate any help, thanks!
Ose.

I've done some experimenting, and it seems that the problem is with my CGI application and not the Java application after all! (sigh) I wish I hadn't spent those duke dollars now. Oh well.

Attachment transfer issue from Shopping cart to Purchase req in ECC

Hello,
How are you all. Need your expert advise..
We are trying to achieve functionality where documents which are attached on shopping cart get transfer into Purchase req in ECC (Classic Scenario with SRM 5.0 and ECC 6.0). For this we have done following config / enhancements:
- Activated BADI "BBP_CREATE_BE_RQ_NEW" in SRM with following code for attachment;
cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
- Created new document type ECC with t.code DC30 for SRM and assigned the object links for EBAN table.
After performing above task we are able to see Link of the attachment into Purchase req in ECC with document number (i.e. the one we assigned while defining document type in DC30) but not able to open the document in ECC.
Could you please let us know if there is any settings which we have missed for actually opening documents in ECC?
Thank you
Ritesh

Issue as reported Please let me know why the docs are not uploaded to SRm succesfully .
I am facing the below weird issue .
Easy shopping >Shop> eHiring catalog
Click Transfer to SRM
Now click on the button ‘Details’ and open the tab ‘Notes and attachments’
All attchments are names after the 1st attachment and all have the same file type
Basically you have lost all you attachments here, except 1 (when you click on the link, all links refer to the same document, so not just cosmetic). This is a problem.
When you order this shopping cart and search for it and open it again, the attachment tab is even completely empty, so now all attachments are lost.
Something like this, but less severe, happens in the process a bit further.
- Approve the shopping cart with the applicable approver
- Log in as Hiring desk:
Still no original attachments (like job descriptions).
Now click button ‘responses and awards’
Click tab ‘Items’ and fill out price ‘40’ euro
Click notes and attachment tab
I added 5 attachments
As can be seen here, the docx becomes an xlsx again, but it looks like it just takes over the 1st file type that was uploaded, it can also be the other way around (xlsx becomes docx) when the 1st uploaded attachment is a document.
But in this case, when you click on the link, it will open the right file with the right program, so over here it looks like it is just cosmetic.

Convert into Data Table issue from Excel Sheet Table

Hi
i've excel file where 10-12 sheets are available in that excel file.one of the sheet is named as summary.there are 8-10 tables(named as Table1,Table2,Table3....) in that summary sheet as well.
i've to actually get the Table1 from the summary sheet into the DataTable.
So,i've written a following method to read "summary" sheet and then i checked if the Table1 exist then break the loop.My problem is i've found Table1 but i am not able to convert it into the DataTable.Can anyone tell me how to do it.
private void GetProjectTable(string ExcelFileUrl)
string sheetName = "Summary";
string value = null;
// Open the spreadsheet document for read-only access.
try
String siteURL = SPContext.Current.Site.Url;
SPSecurity.RunWithElevatedPrivileges(delegate()
Stream dataStream = null;
using (SPSite site = new SPSite(siteURL))
using (SPWeb web = site.OpenWeb())
SPFile file = web.GetFile(ExcelFileUrl);
dataStream = file.OpenBinaryStream();
using (SpreadsheetDocument document =
SpreadsheetDocument.Open(dataStream, false))
// Retrieve a reference to the workbook part.
WorkbookPart wbPart = document.WorkbookPart;
Sheet theSheet = wbPart.Workbook.Descendants<Sheet>().
Where(s => s.Name == sheetName).FirstOrDefault();
// Throw an exception if there is no sheet.
if (theSheet == null)
throw new ArgumentException("sheetName");
WorksheetPart wsPart =
(WorksheetPart)(wbPart.GetPartById(theSheet.Id));
DocumentFormat.OpenXml.Spreadsheet.Table table = null;
DataTable dt = null;
foreach (TableDefinitionPart tdp in wsPart.TableDefinitionParts)
if (tdp.Table.DisplayName == "Table1")
table = tdp.Table;
break;
catch (Exception ex)
Note: I am using this code in the Visual Web Part for SharePoint

Hi hellofragrance,
According to the description, you want to convert to the table in Excel to DataTable using Open XML SDK.
As far as I know, there is no such API we can achieve the goal directly. However, we can write custom code to complete the job. Here are some major steps for your reference:
1. Get the information of the table we wanted to convert. For example, column information and the range address for the table. And we can get the these information via the
Table object of
TableDefinitionPart Class
2. Then we can create a DataTable via the column information we get from step1 and initialize the data table via read the data from range of table.
In addition, here is helpful article about read the value of specific cell for your reference:
How to: Retrieve the values of cells in a spreadsheet document (Open XML SDK)
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Transferring data(Transfer Order ) From SAP system to Legacy System

Hi Friends
please , help me out
I Need to Transfer The Transfer Order (LT03) Data To legacy System
How to create the Idoc on LT03
Is there a solution for this please..
Regards..
null

Hi Viswa ,
You need to setup the configure the communication between SAP and legacy.
EDI will suffice your requirement.
Regards,
Madhu.

Data Transfer Issue from R/3 Prod to BW Prd

Similar Messages

Maybe you are looking for