Data transfer processes and info packages in new client
Hi,
We have created new client from the development client.
The Info cubes and update rules are available in new client, bu the data transfer processes and info packages are not moved to the new client.
What is the actual sequence of steps to be followed when new client created from development client. Have I missed some sequence or steps. What are the sequence of steps to be followed when created a new client.
Kindly suggest to resolve this issue.
thanks and regards
Murugesan
Hi,
I have never seen clients created on the BI system. As such all the objects in the BI system are client independent as well as the data stored in the tables does not have the mandt field. Hence you cannot distinguish different clients in the BI system. Also if you notice all the request in BI are workbench request and not customizing requests.
I do not think this is a viable solution. Maybe you can contact SAP.
http://help.sap.com/saphelp_nw70/helpdata/en/b7/8a9a3aaf894871e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/bb963a570b4b5de10000000a114084/frameset.htm
Regards,
Vikram
Similar Messages
-
Data Transfer Process and Delete Overlapping Requests
Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
ScottHi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks -
Data Transfer Process and Infopackage
Are both Data Transfer Process and Infopackage the same...Can someone please explain... thanks
Hi,
Pl search the forum for these questions as these are mostly discussed in the forums.
or simply google it...
Now IP is mandatory and used to bring the data from source to PSA..
and DTP is loading and transfering the data within BI itself.
rgds, -
I'm using Yosemite now, new computer comes with Mountain Lion, can I transfer apps and info?
You can, but there is a high risk of leaving OS X in your new Mac unusable. This is because Migration Assistant will detect that your new Mac has got preinstalled apps with an older version than the ones you have in the "old" Mac, and it will try to replace them. However, the new apps versions are designed for Yosemite, so you will not be able to open any application.
Because of that, I recommend you to set up the new Mac without transferring your data, and upgrade it to Yosemite. Then, use Migration Assistant to transfer your files. -
What is the "Data Transfer Process" in the BI7.0, and how does it work?
Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks -
RE: Transformation and Data transfer process.
Hi guys,
Please some bosy help me out by providing the differences between Transformation and Data Transfer Process.
thanks in adwance
omkarHi Omkar,
Trnasformations providing the mapping between Sorce fields( datasource to data target). only map the structures..
<b>Transformations:</b>----
-->Trsnsformations are used to create mappings between two BI Objects and to
transform data from BI Source(From where) to BI Target .
-->You can create One-One Mappings between source and target in BI
-->In transformations Source is : DataSource, InfoSource, DataStore object,
InfoCube, InfoObject and InfoSet
-->Target is: InfoSource, InfoObject, DataStore object and InfoCube.
-->Transformations replaces the transfer and update rules.It's like creating transfer
rules and update rules.Through these rules/mappings/transformations, the
system is going to transform data from Source to Target.
but DTP means.. the data loading procedure will be done with this step..
<b>DTP :</b>
DTP is used to transfer data from PSA to the infoprovider.
The data transfer process can also be used to control data distribution from a BI system into any target outside of the BI system. For this purpose, a data transfer process with an open hub destination is used as the target.
Since Deltas are now based on request from PSA ,you can have multiple datatargets pulling data with same selection criteria from same datasource(ECC) with INITS/DELTA,not possible earlier.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
regards
@jay -
Data Transfer Process filter: how to view the filter values?
Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
JeanHi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh -
DTP (Data Transfer Process)
Hi, I would like to know more about DTP (Data Transfer Process), how can i use it to replace infosources, transfer rules and update rules in just one transformation.
I will be very grateful for your comments and your help...
Thanks and regards!hi,
You use the data transfer process (DTP) to transfer data within BI from a persistent object to another object in accordance with certain transformations and filters
It is like a replacement of the info packages in the olderr versions.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
youu can refer to this link for mor infos.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
hope it helps.. -
Error while transporting PCs and Info packages frm dev to qa
Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani...... -
Errors druing Data Transfer process
Hello!
I go through the SAP BW example and have the following error by generating Data Transfer process.
I have corrected the errors (from "EURO" to "EUR") in CSV-files, but I get still the errors:
No SID found for value 'EURO ' of characteristic 0CURRENCY
No SID found for value 'U1 ' of characteristic 0UNIT
I have recreated the flat files/.csv-files, deleted and created the info cube, but the error still occurs.
What are the steps to fix the error?
How can I know which data source contains the error?
What are the possible values for 0CURRENCY and 0UNIT?
Can some one give some recommendation?
Thank you very much!
rergards
ThomHello,
You need to delete the data from PSA after an Unsuccessful load, if you want to load it again after correcting data in the source (Flat file in ur case). Right click ur datasource->Manage. Select the request which failed and hit the delete button (trash) at bottom. Now try loading it again.
To get all possible values of currencies and units defined in your system. check contents of following tables:
TCURC - Currency Codes (field -WAERS)
T006 - Units of Measurement (field - MSEHI)
Thanks -
Activation of Objects with Type Data Transfer Process
Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
Internal Activation (Data Transfer Process )
Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW 700 SAPKW70014 *
Your suggestion will be appreciated with maximum points
ThanksHello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks -
Data transfer process(urgent)
Hi bw gurus,
can any one help me on data transfer process .i need to prepare the ppt on this .plz help me out in this..
thanks in advance
uma reddyHi Uma,
Check out the below link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/content.htm
In BI 7,using info packages you can only load data upto PSA. To load the data from PSA to data targets we use DTP's.
Hope this helps.
Cheers
Praveen -
Is there any documentation for filter routine in Data Transfer Process?
I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0data: l_dow TYPE I,
L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
date = sy-datum
IMPORTING
day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF. -
Error in Data Transfer Process (DTP) Urgent!
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nipsPlease do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent! -
Hi,
I am having problems with a data transfer process, i am getting the message:
Extraction datasource Z_WMS_VRM
Prepare for extraction
Exceptions in Substep: Extraction Completed
Processing terminated
When I click the button behind "Exceptions in Substep" it jumps to a line with
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
in method IF_RSBK_CMD_X~GET_DATAPACKAGE.
When I look in the PSA(13 records) it all looks ok, no weird values. De infopackage runs ok and fills the PSA. Screenshot of PSA contents: http://i44.tinypic.com/sesqw2.jpg
The datasource is an external DS filled by powerexchange 4.
The system's current support pack is 18.
Edited by: Thijs de Jong on Jun 23, 2009 12:00 PM
Edited by: Thijs de Jong on Jun 23, 2009 12:11 PMHello Thijs,
The same issue happened to me this week. This can happen for several reasons:
- Some parts of the loading line is not active, resp. structures were changed and need to be activated again.
- There is no more tablespace in the DB.
- There is a deadlock when reading a table (maybe the table is too big...)
Hope this helps.
Cheers,
Stephan
Maybe you are looking for
-
NEED HELP IN LABELLING A TRIANGLE _ VERTICES
PLEASE HELP ______ import java.awt.*; import java.awt.event.*; import java.awt.geom.*; import java.text.NumberFormat; import javax.swing.*; import javax.swing.event.*; import javax.swing.table.DefaultTableCellRenderer; import java.lang.*; import java
-
Runtime Error R6034 blocking my access to Itunes any ideas on how to fix it
Hi I got a notice to update my Itunes yesterday and after confiriming the dowload I got an error as listed above. I could not access my Itunes and the error keeps showing when I restart my pc. So far I have uninstalled all Apple programmes and tried
-
Character value truncated in ALV display
Hi, We are using DISPLAY() method in class CL_SALV_TABLE to display the ALV output. One of the field in internal table that is being used contains more than 400 characters. But in the output, it is displaying not more than 255 characters. Can you p
-
Dear, Is there any way to use swing applet in IE. Thanks,
-
Internal Order Settlement-urgent
Hi Gurus I have an internal order balance of -160$ USD. USD is the Controlling Area Curr. But when viewed in local Curr (CAD) it has a balance of zero. I checked the controlling area settings, and it is set to update local aswell as contr. area curr.