Data Transfer Tool for ECC 6.0

Hi All,
Good Morning. I would like to know if anybody has had the opportunity to use this tool in ECC 6.0. If so, where did you obtain the software related to this tool?
Please Advise.
Kind Regards,
Daniel A. La Mendola

I am actually looking for where the program resides and if it exists for ECC 6.0. I have found tons of documentation, but nothing on how to obtain the tool itself.
If anybody can assist me in the endeavor it would be greatly appreciated.
Thanks again for you help

Similar Messages

Data Transfer Toolbox for ECC 6.0

I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM. I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes. A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed. So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
Thanks
Mike

Hi Michael,
Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
Thanks.

Data transfer position for candidate

Hi Experts,
We are implementing ECC 6, E Recruiting. When we do data transfer activity for a candidate then we want to pull the position on which data transfer activity was done for candidate in a Z Report.
Can any one tell me in which info type position is stored for a candidate at which data transfer activity is done or it is not stored at all any where in data base.
Regards
Puneet

data is always stored anywhere, how would the system know what to show otherwise?
http://www.nicx.co.uk/attachments/File/Data%20Model%20&%20Infotypes.pdf

EDT and BDT data transfer tool...

Hi,
I am working in insurance module of SAP. There is a business object called Business Partner which we need to migrate from legacy to R/3.
Now for migration of Business partner generally LSMW is not used. People here use EDT (External data transfer) and BDT (Business data toolset)
Does some one know about EDT and BDT as data transfer tools ?
Regards,
Rajesh.

Hi Rich,
I will make sure that I don't duplicate the post.
Thanks.

Configuration Data Transfer Tool

Hello all,
I am working with my client to plan our ME Configuration and we are trying to determine how best to propagate the configuration from one system to another (i.e. DEV to QA to PROD).
I understand there is a new tool being developed for SAP ME 6.0 called the Configuration Data Transfer Tool.
Will it be possible to use this tool for SAP ME 5.2.5? Has anyone tried to do this?
What are the overall recommendations and/or methods other folks have used to move their configuration to another system?
The goal is to move configuration and master data only, no transactional data.
Any insight would be greatly appreciated.
Thank you.
Mari Santangelo

Mari,
Configuration Data Transfer Tool is not a standalone application but just a feature (the activity) of ME 6.0 so you can't use it with ME 5.2.5. And there is no information about porting it back from 6.0 to 5.2.5.
In 5.x and prior releases, there is DataXchange tool mentioned by Ivan and Site2Site Transfer activity (you can find the guide next to Xchange guide on SMP).
Regards,
Sergiy

The standard SAP data transfer program for vendors

Hi Experts,
Could u please tell me that wt is the program which is <b>"the standard SAP data transfer program for vendors"</b>?
could you plz tell me what exactly is it?
and itz tcode..
is it the "XK01" only or anything other?
thnx
Message was edited by: sey ni

Hi,
Pl use RFBIKR00 for Vendor Matser upload. Th eProgram documentation is very useful too.
Regards,
Suresh Datti

Data transfer files for Sales Invoices (A/R Invoices)

Hi,
I want Data Transfer Sheets for A/R Invoices in Sales module, Can you provide me?
Thanks,
Surendra.

Hi Fidel,
I have checked that path.
The below mension templetes are available in that path
C:\Program Files\SAP\SAP Business One\Data Transfer Workbench\Templates\Templates\
oSalesForecast, oSalesOpportunities, oSalesPersons, oSalesStages, oSalesTaxAuthorities, oSalesTaxAuthoritiesTypes, oSalesTaxCodes, oSalesTaxInvoice, & etc
No templates for Sales Invoice. I saw oInvoices template, it will usefull for Sales invoices, can you check it & confirm me please?
Path: C:\Documents and Settings\Noni SAP4\Desktop\ZSL\Templates\Templates\oInvoices
Thanks,
Surendra.

Problems when creating data transfer process for 0EC_CPLAN (Compensation )

Hi experts,
I have the infoobject 0EC_CPLAN (Compensation Plan) Active in my BW sistem.
I tri to create data transfer process for text and atributtes for it, but when i do this i get a "Target 0EC_CPLAN (Type IOBJA) is not active" error message.
When i double-click on the texts or attributes i recive an "Administration function is not possible for this InfoObject" information message and i can not active or edit it.
What could this be? I am breaking my brain.
Thank you all!

Debugging i have seen this:
15         CALL FUNCTION 'RSD_IOBJ_GET'
16           EXPORTING
17             i_iobjnm         = l_iobjnm
18             i_objvers        = rs_c_objvers-active
19             i_bypass_buffer = rs_c_false
20           IMPORTING
21             e_s_vcha         = l_s_vcha
22           EXCEPTIONS
23             iobj_not_found   = 1
24             illegal_input    = 2
25             bct_comp_invalid = 3
26             OTHERS           = 4.
27         IF sy-subrc <> 0 OR l_s_vcha-infoarea IS INITIAL.
28           MESSAGE i025(rsawbn).
l_s_vcha-infoarea is Initial.
Dues this mean that the object has no-infoarea??? In infoprovider i is under "enterprise compensation management" Does it give you a clue?
Thanks!

TR History Data Migration Tool in ECC 6.0

Hi,
Is there any tool is ECC 6.0 to migrate old 4.6C transaction data in to ECC 6.0?
We want to configure a new ECC 6.0 system with TR-TM and migrate all transaction data from old system 4.6C to ECC 6.0. All configuration of 4.6C in TR-TM and FI-CO will be maintained in ECC 6.0
Please advise if you know any such tool in ECC 6.0
Thank you.
With Kind Regards,
Naresh B. Pandya

Hi,
Got it. I have done a similar project from 4.0B to 4.6C a few years back and it was painful, as there were no tools available.
In ECC6, SAP provides an elaborate set of tools, however the process will still be painful, as you would first need to customise your ECC6 box as per 46C customisation, but there will be a difference in customisation due to the fact that FSCM is now used for Treasury, where position management and business parters are handled very differently.
The 46C data will now need to be treated as legacy, the only benefit will be that data availability in the form you want will be easy.
After you activate the extension EA-FS as suggested earlier, you will see the node for Financial Supply Chain Management in the IMG. Navigate as below for the data transfer process:
Financial Supply Chain Management ->Treasury and Risk Management->Transaction Manager->General Settings->Tools->Legacy Data Transfer
You will need to refer to the IMG help and the link below for help.
[Legacy Data Transfer|http://help.sap.com/saphelp_erp2005/helpdata/en/56/d880392c58ab54e10000000a114084/frameset.htm]
Cheers.

Data Transfer Erec and ECC HR

Hi all,
We are using having 2 backend systems 1 for HR other than Erec and another one for erec.
Now we have setup the ALE data transfer using Message type HRMD_ABA.
In erec we have only ERECRUIT Component deployed in backend,no EA HR or SAP HR component deployed.
MEaning no PA* tables.
Now when Transfer personnel number(HR!001-A008 with Position) to erec box,it says no pernr exist.
Howver i cannot tranfer the pernr from ECC to Erec as we dont have PA* tables in Erec.
Can you share me the object types that are transferred from ECC to EREc and EREC and ECC.
What are the components to be deployed in backend Erec box.
In Portal for requistions application which should backend(System Object) and for recruiter and recruitment admin applications which should be the backend system(System Object).
Thanks,
Nachy

Hi,
Check the link :
http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm
Supported infotypes for transfering data from the E-Recruiting to the HR-System are the PA infotypes 0,1,2 and 6. There are 15 fields sent to pa48 if they were filled in the E-Recruiting system, which are
- forename, initials, surname
- gender
- birth date
- correspondance language
- address (street, city, streetcode, region, country)
- hiring date
- organisation unit
- position
- personel number (for internal candidates)
So these are the infotypes which can be transfered automatically and cause no problems. If you want the "title" to be transferred additionally, you have to adjust the system behaviour accordingly.
To set up data transfer,
In E-Rec System, use Tcode - BD64 Partner Type LS - Generate partner profile for the ECC System
Use Tcode - WE20 for the Partner profiles checking
For ECC Partner Profile, Give Outbound parameters - Messahge type HRMD_ABA and SYNCH. Give Inbound parameters- Message Type HRMD_ABA
In ECC system, use BD64 for the Partner Type LS. Partner Type LS - Generate partner profile for theCreate Erec System(
Use Tcode - WE20 for the Partner profiles checking
For E-Rec Partner Profile , Give Outbound parameters - Messahge type HRMD_ABA and SYNCH. Give Inbound parameters- Message Type HRMD_ABA
After doing data transfer using RHALEINI, use transaction SM58 to check whether the data has been transferred or not.
Hope it helps!
Arpita

Hi Data transfer methods for ABAP Dataflow

HI
Good Day !!!!
Can any one Explain about What are Data tansfer mothods in ABAP Dataflow Explain Each one which is the best one can you explain with example .
Regards
Chandu

Data Transfer
Definition
Synchronous Data Transfer
Data is transferred directly (simultaneously, synchronously) from program to program via CPI-C communication.
Both communications partners must be available at the same time. Because the central SAP system in a typical SAP installation does not run round the clock, but the linked systems are frequently in operation 24 hours a day, asynchronous data transfer is necessary.
Synchronous data transfer has the following disadvantages:
Transfer is not possible is the partner system or the line is not available.
A data backlog in the reciever system causes a data backlog in the sender system. Processing in the application is delayed.
If a connection is broken, it may be necessary to perform a recovery in both systems.
Asynchronous Data Transfer
With asynchronous, or buffered, data transfer, data is temporarily stored in a sequential queue.
Asynchronous transfer has the following advantages:
Wait times in the sender system are avoided.
A recovery is automatically performed in the sender system.
Transfer need not be performed during online time. This avoids placing unnecessary load on the system and thus helps to reduce costs.
The Queue Application Programming Interface (Q-API) is an SAP interface for asynchronous data transfer.
Data is buffered sequentially and processed immediately or later by an asynchronously running process.
One possible processing method is to send data to an external partner system via CPI-C. Data units that belong together can be stored in accordance with transaction and sent to a communications partner.
Data is buffered in queues before it is transferred to the target system.
In an R/3 System, the queues are stored in a relational database. All R/3 database systems are supported.

Data transfer software for Samsung cell phones

hi,
does anyone know where i could buy data transfer software + usb cable for a samsung a650? i have been able to find the software for windows pcs but not for mac os x.
thanks,
vince

I have found two possibilities for iSync with a Samsung A650:
Data Pilot: http://www.susteen.com/phonesupport/en_US/13/7/410
OnSync: http://www.onmadesoft.com/pgs/mobiles_samsung.html
OnSync is shareware, so you can try it out, but you'll have to find a cable first. It's not clear from their web site whether it works with the A650 specifically.
I have an A650 also, and am interested in hearing from anyone who's actually succeeded in using it with iSync.

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

How to install Data Transfer Tool (DTT) on ECC 6.0

Hello SAP Guru's,
I am trying to get DTT installed on ECC 6.0 system. It used to be part of Best Practices for HCM in ECC 5.0 system. However the Best practices for HCM in ECC 6.0 does not have DTT included in it. Is there any way, I can get just the DTT part of it on ECC 6.0?
Any help you can privide, is greatly appreciated.
Warm Regards,
Balkrishna Kute

Balkrishna,
I've got the same issue as you.
Did you get an answer to this elsewhere or is your issue still unresolved since September last year?

How to implement a conversion rule in KC7R (External Data transfer-Tool)

Hi,
I am familiar with programming conversion rules in ABAP in the LSMW and IS-U Migration workbench.
Unfortunately we have to work with EDT (transaction KCLJ).
I need to implement a simple conversion rule: migration file has the external BP number BPEXT and I must retrieve the internalone (PARTNER) for the migration program.
So I must implement a short ABAP code (select single * from BUT000 ...).
Now I see that in KC7R you can use constants and conversion rules. There are also "General Ruels" and "conversion routines".
Can someone explain how to implement this simple ABAP conversion rule in KC7R giving a short example?
This would be great.
EDT is the workst of all SAP Standard Migration Tools I have seen.....
Kind regards,
Thomas

Thomas,
Coud you please share your findings as I am now in a similar to your original post.
ie I too would like to know how to code convesions for use within the transfer rules used by KCLJ.
Kind Regards,
Hiten Mistry.

Data Transfer Tool for ECC 6.0

Similar Messages

Maybe you are looking for