Data transfer toolbox dump

Hi,
I am using sap standard data transfer toolbox (transaction - /n/hrbp/zdtt) to upload my OM related data. Initially I am trying to upload infotype 1000 and 1001. But I am getting a short dump with the below description.
"The ABAP program lines are wider than the internal table.The current ABAP program "/HRBP/ZHDX1000" had to be terminated because it has
come across a statement that unfortunately cannot be executed.".
Could anyone help me if they have encountered such a problem in DTT.
Regards
Shyam.

Hi,
We encountered the same problem while using the DTT toolbox and have to copy the ZHDX1000 program to another ZProgram and then we changed the required include statement and now its running.Not from the DTT tool but that custom report.
Alo some settings need to be altered in the User Profile who is running the tool like UGR is set to 99 and MOL is set to country running the program.
Regards,
Amit
When we executed the DTT program, we followed the dump and found one of the include have a perform missing, so the developer just took care for that one and now its running through that custom program.
Message was edited by:
Amit Khare

Similar Messages

Data Transfer Toolbox for ECC 6.0

I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM. I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes. A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed. So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
Thanks
Mike

Hi Michael,
Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
Thanks.

HR Data Transfer Toolbox - Initial Conversion

Our project is trying to use the HR Data Transfer Toolbox to initially load all employees using best practice configured action 'X'. However, we have turned on concurrent employment in our config settings. This is causing a BDC error. The BDC records SAPMP50A 2000, but the screen called when you run the BDC session is SAPMP50A 2200. Has anyone come across this issue and what is the proposed resolution.

I am looking for the same thing, from what I can tell, you need to purchase this separately, it's not free. Try the following links and let me know if you find something different.
https://websmp104.sap-ag.de/bestpractices
then click cross-industry packages and then HCM

HR Data Transfer Toolbox

Hi,
I am trying to create employee record in HR module using HR Data Transfer Toolbox. But when I typed in transaction code ZBPHR_ZDTT, the error came out that transaction doesn't exist.
Can anyone tell me how I can get into this toolbox?
Thank you in advance,
Sunny

I am looking for the same thing, from what I can tell, you need to purchase this separately, it's not free. Try the following links and let me know if you find something different.
https://websmp104.sap-ag.de/bestpractices
then click cross-industry packages and then HCM

HCM Best Practices version 1.500 (HCM Data Transfer Toolbox)

Hi,
Does anyone have the HCM Data Transfer Toolbox (BPHRDTT, HR-DTT, HRDTT)? This seems to be discontinued and been replaced by LSMW which does not provide anything even close to this tool!!!!
I wish this would have been posted in the Downloads on SDN.
Thanks
Check out the following link to see what I mean:
http://help.sap.com/bp_hcmv1500/HRBP_DTT_V1_500/index.htm
Edited by: Andreas Mau on Jan 30, 2009 8:42 AM

Hi Uwe,
Thanks for giving it a try, but my question is very specific for the reason that SAP has discontinued a perfectly good tool and replaced it with some do-over.
LSMW - is not always suitable and for large loads the performance is out of wack. You always have to start from scratch creating the stuff.
PU12 - The interface toolbox is nice but it could offer something more like XML or MHTML formating so you can actually reuse the data without pain. Also for payroll extraction on retro-results for only deltas this is not useful either.
HR-DTT - Was a tool that had all you really needed and was working just fine. It had everything not just infotypes but also T558B/C/E load although I prefer T558D than T558C. Here SAP is totally lacking support. The 2 BAPIs for BUS1023 do not support all one is only for outsourcing, the other for only B/D tables. In the code the E table update is commented out since they forgot to actually add the corresponding structure for the load as importing parameter...
SXDA - A rather unknown Data Transfer Workbench which also uses projects to organize the data transfer hooks up onto LSMW as well, but again that is where the tools end. There are no example projects for any area that are of any use. SCM/SRM has some minor examples but nothing that could be called exhaustive.
The Link: Thanks to SAP support this link has been discontinued so that no-one can ask questions any more on this issue. You may still find the docu on the service marketplace in 50076489.ZIP for HRBP_USA_V1500
Edited by: Andreas Mau on Apr 23, 2009 10:36 PM
Edited by: Andreas Mau on Apr 24, 2009 1:39 AM

Upload infotype with ZDTT (HR DATA TRANSFER TOOLBOX)

Hi,
Can someone has documentation for ZDTT ?
Thanks in advance
Soufiene

Hi,
As far as I remeber , The package when you download does comes under 2 parts. one of them BPHR_PD_DATASET.exe which contains the excel sheets. If you are not able to get just mail me ur id, I will try to send them
Regards

DTT - Data Transfer Toolbox Template?

Any know of another location to download the set of templates for DTT, the URL SAP provide on their bestpractice website doesn't work..
http://help.sap.com/bp_hcmv1500/HRBP_DTT_V1_500/DTT_Documentation/Templates/USA

all of them pretty much..
[email protected]
thx

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Possible network issues preventing successful application data transfer?

Hello all.
We are having a few issues with a specific set up here at work involving Oracle 11, and Oracle 9 databases and I was hoping someone with a fair idea of how Oracle configurations work when it comes to network connectivity and data transfer would mind sharing their opinion on the matter.
First off, a bit of background. I'm a network security engineer by trade and my experience when it comes to the application side of things, specifically databases is inherently weak; so I apologise if my terminology or logic is slightly off here.
Basically what I'm trying to determine is where a fault lies between our users using a terminal server and a remote Oracle SQL database that should service their requests.
The problem lies wherein the user will utilise the 'sqlplus' application invoked from a Windows command prompt window, and expect to be able login and query a database. I believe we have two versions available to use, version 9 which is not actually in production but able to be used for testing and version 11 which is active in production.
When accessing Oracle 11 servers will hang where we expect to see a successful connection followed by a healthy looking "SQL>" prompt data transfer appears to stall as follows:
C:\>sqlplus username/[email protected]
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:12:17 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
*hangs here*If we try on the Oracle 9 setup things look fine initially:
C:\>sqlplus username/[email protected]
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:19:20 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - ProductionHowever once connected to the Oracle 9 box; if we run a query similar to:
sqlplus username/[email protected]
select * from <database> where rownum < 10;This will again hang.
That said however, if we try and run a query similar to:
sqlplus username/[email protected]
select * from <database> where rownum < 5;This will return 4 rows of usable data, without issue.
Our systems engineer provided me with a SQLNET trace from the server side and believes he's identified where it occurs:
[21-SEP-2010 16:06:42:989] nsdo: entry
[21-SEP-2010 16:06:42:989] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
[21-SEP-2010 16:06:42:989] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:990] nsdo: nsctx: state=8, flg=0x420c, mvd=0
[21-SEP-2010 16:06:42:990] nsdo: gtn=156, gtc=156, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:990] nsdo: switching to application buffer
[21-SEP-2010 16:06:42:990] nsrdr: entry
[21-SEP-2010 16:06:42:990] nsrdr: recving a packet
[21-SEP-2010 16:06:42:990] nsprecv: entry
[21-SEP-2010 16:06:42:990] nsprecv: reading from transport...
[21-SEP-2010 16:06:42:990] nttrd: entry
#    HANG OCCURS HERE
[21-SEP-2010 16:10:13:347] ntt2err: entry
[21-SEP-2010 16:10:13:347] ntt2err: soc 25 error - operation=5, ntresnt[0]=517, ntresnt[1]=131, ntresnt[2]=0
[21-SEP-2010 16:10:13:347] ntt2err: exit
[21-SEP-2010 16:10:13:347] nttrd: exit
[21-SEP-2010 16:10:13:347] nsprecv: transport read error
[21-SEP-2010 16:10:13:347] nsprecv: error exit
[21-SEP-2010 16:10:13:347] nserror: entry
[21-SEP-2010 16:10:13:347] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=131, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[21-SEP-2010 16:10:13:348] nsrdr: error exit
[21-SEP-2010 16:10:13:348] nsdo: nsctxrnk=0
[21-SEP-2010 16:10:13:348] nsdo: error exit
[21-SEP-2010 16:10:13:348] nioqrc: wanted 1 got 0, type 0
[21-SEP-2010 16:10:13:348] nioqper: error from nioqrc
[21-SEP-2010 16:10:13:348] nioqper:    nr err code: 0
[21-SEP-2010 16:10:13:348] nioqper:    ns main err code: 12547
[21-SEP-2010 16:10:13:348] nioqper:    ns (2) err code: 12560
[21-SEP-2010 16:10:13:348] nioqper:    nt main err code: 517
[21-SEP-2010 16:10:13:348] nioqper:    nt (2) err code: 131
[21-SEP-2010 16:10:13:349] nioqper:    nt OS   err code: 0
[21-SEP-2010 16:10:13:349] nioqer: entry
[21-SEP-2010 16:10:13:349] nioqer: incoming err = 12151
[21-SEP-2010 16:10:13:349] nioqce: entry
[21-SEP-2010 16:10:13:349] nioqce: exit
[21-SEP-2010 16:10:13:349] nioqer: returning err = 3113
[21-SEP-2010 16:10:13:349] nioqer: exit
[21-SEP-2010 16:10:13:349] nioqrc: exit
[21-SEP-2010 16:10:13:349] nioqds: entry
[21-SEP-2010 16:10:13:349] nioqds: disconnecting...
[21-SEP-2010 16:10:13:349] nsdo: entry
[21-SEP-2010 16:10:13:349] nsdo: cid=0, opcode=67, *bl=0, *what=1, uflgs=0x2, cflgs=0x3
[21-SEP-2010 16:10:13:350] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:10:13:350] nsdo: nsctx: state=1, flg=0x420c, mvd=0
[21-SEP-2010 16:10:13:350] nsdo: nsctxrnk=0
[21-SEP-2010 16:10:13:350] nsdo: error exitFrom the client log side, it looks like this:
[21-SEP-2010 16:06:42:886] nsdo: entry
[21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
[21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
[21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:886] nsdofls: entry
[21-SEP-2010 16:06:42:886] nsdofls: DATA flags: 0x0
[21-SEP-2010 16:06:42:886] nsdofls: sending NSPTDA packet
[21-SEP-2010 16:06:42:886] nspsend: entry
[21-SEP-2010 16:06:42:886] nspsend: plen=17, type=6
[21-SEP-2010 16:06:42:886] nttwr: entry
[21-SEP-2010 16:06:42:886] nttwr: socket 1724 had bytes written=17
[21-SEP-2010 16:06:42:886] nttwr: exit
[21-SEP-2010 16:06:42:886] nspsend: packet dump
[21-SEP-2010 16:06:42:886] nspsend: 00 11 00 00 06 00 00 00 |........|
[21-SEP-2010 16:06:42:886] nspsend: 00 00 03 05 1C 01 01 01 |........|
[21-SEP-2010 16:06:42:886] nspsend: 0F                       |.       |
[21-SEP-2010 16:06:42:886] nspsend: 17 bytes to transport
[21-SEP-2010 16:06:42:886] nspsend: normal exit
[21-SEP-2010 16:06:42:886] nsdofls: exit (0)
[21-SEP-2010 16:06:42:886] nsdo: nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: normal exit
[21-SEP-2010 16:06:42:886] nsdo: entry
[21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
[21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
[21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:886] nsdo: switching to application buffer
[21-SEP-2010 16:06:42:886] nsrdr: entry
[21-SEP-2010 16:06:42:886] nsrdr: recving a packet
[21-SEP-2010 16:06:42:886] nsprecv: entry
[21-SEP-2010 16:06:42:886] nsprecv: reading from transport...
[21-SEP-2010 16:06:42:886] nttrd: entry
#    HANG OCCURS HERE
#    Need to <CTRL C> twice to kill
#I've tried searching the net for similar occurrences of some of the interesting looking trace data but there appears to be limited information available, none of which is terribly helpful.
What I'm really after is either someone who has had this issue before, or someone who can better interpret the error output from the trace files and perhaps give me an idea of what's causing it to occur. Specifically whether that error text above relates to a failed connection on the underlying network connectivity side of things or whether it may be something on a higher level within the application layers. We have done packet dumps on firewalls to check the traffic as it traverses the firewall but there are no anomalies that I can see which may be contributing to the issue at hand.
I have organised for some testing to occur within the next 24 hours as there is a Cisco ASA Firewall that sits in the network path that is performing inspection on packets travelling through it. The inspection for SQLNET specifically is disabled, but we intend to enable this once more for testing to see whether it makes a difference. I'm not entirely confident it will however, and until we do get a chance to test any constructive input or alternate ideas will be greatly appreciated. I'm trying to cover as many bases as possible here.
Cheers,
Josh.

So some further testing doesn't show anything interesting. But that said here's a look at a TCP Dump for the Oracle 11 session that hangs:
SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
tcpdump: WARNING: bond0: no IPv4 address assigned
tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
21:55:43.781596 IP (tos 0x0, ttl 126, id 24439, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.62008 > 172.x.x.x.1521: S, cksum 0x4d0a (correct), 2416392635:2416392635(0) win 64512 <mss 1380,nop,nop,sackOK>
21:55:43.782454 IP (tos 0x0, ttl 59, id 50281, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: S, cksum 0xc0ae (correct), 3123579836:3123579836(0) ack 2416392636 win 49680 <mss 1460,nop,nop,sackOK>
21:55:43.783311 IP (tos 0x0, ttl 126, id 24440, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0xb382 (correct), 1:1(0) ack 1 win 64512
21:55:43.787142 IP (tos 0x0, ttl 126, id 24441, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 1:245(244) ack 1 win 64512
21:55:43.788504 IP (tos 0x0, ttl 59, id 50282, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xed72 (correct), 1:1(0) ack 245 win 49436
21:55:43.859023 IP (tos 0x0, ttl 59, id 50283, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: P, cksum 0xe166 (correct), 1:9(8) ack 245 win 49680
21:55:43.860392 IP (tos 0x0, ttl 126, id 24445, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 245:489(244) ack 9 win 64504
21:55:43.861773 IP (tos 0x0, ttl 59, id 50284, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xeb82 (correct), 9:9(0) ack 489 win 49680
21:55:43.861908 IP (tos 0x0, ttl 59, id 50285, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.62008: P 9:41(32) ack 489 win 49680
21:55:43.865341 IP (tos 0x0, ttl 126, id 24446, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.62008 > 172.x.x.x.1521: P 489:645(156) ack 41 win 64472
21:55:43.867017 IP (tos 0x0, ttl 59, id 50286, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.62008: P 41:168(127) ack 645 win 49680
21:55:43.874836 IP (tos 0x0, ttl 126, id 24447, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.62008 > 172.x.x.x.1521: P 645:682(37) ack 168 win 64345
21:55:43.876405 IP (tos 0x0, ttl 59, id 50287, offset 0, flags [DF], proto: TCP (6), length: 226) 172.x.x.x.1521 > 125.x.x.x.62008: P 168:354(186) ack 682 win 49680
21:55:43.995921 IP (tos 0x0, ttl 126, id 24451, offset 0, flags [DF], proto: TCP (6), length: 1420) 125.x.x.x.62008 > 172.x.x.x.1521: . 682:2062(1380) ack 354 win 64159
21:55:43.995978 IP (tos 0x0, ttl 126, id 24452, offset 0, flags [DF], proto: TCP (6), length: 671) 125.x.x.x.62008 > 172.x.x.x.1521: P 2062:2693(631) ack 354 win 64159
21:55:43.999910 IP (tos 0x0, ttl 59, id 50288, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xe18d (correct), 354:354(0) ack 2693 win 49680
21:55:44.015402 IP (tos 0x0, ttl 126, id 24455, offset 0, flags [DF], proto: TCP (6), length: 326) 125.x.x.x.62008 > 172.x.x.x.1521: P 2693:2979(286) ack 354 win 64159
21:55:44.020491 IP (tos 0x0, ttl 59, id 50289, offset 0, flags [DF], proto: TCP (6), length: 1420) 172.x.x.x.1521 > 125.x.x.x.62008: . 354:1734(1380) ack 2979 win 49680
21:55:44.020789 IP (tos 0x0, ttl 59, id 50290, offset 0, flags [DF], proto: TCP (6), length: 671) 172.x.x.x.1521 > 125.x.x.x.62008: P 1734:2365(631) ack 2979 win 49680
21:55:44.021015 IP (tos 0x0, ttl 59, id 50291, offset 0, flags [DF], proto: TCP (6), length: 355) 172.x.x.x.1521 > 125.x.x.x.62008: P 2365:2680(315) ack 2979 win 49680
21:55:44.022489 IP (tos 0x0, ttl 126, id 24457, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0x9ea4 (correct), 2979:2979(0) ack 2365 win 64512
21:55:44.148236 IP (tos 0x0, ttl 126, id 24461, offset 0, flags [DF], proto: TCP (6), length: 215) 125.x.x.x.62008 > 172.x.x.x.1521: P 2979:3154(175) ack 2680 win 64197
21:55:44.152125 IP (tos 0x0, ttl 59, id 50292, offset 0, flags [DF], proto: TCP (6), length: 187) 172.x.x.x.1521 > 125.x.x.x.62008: P 2680:2827(147) ack 3154 win 49680
21:55:44.174040 IP (tos 0x0, ttl 126, id 24462, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
21:55:44.732635 IP (tos 0x0, ttl 126, id 24482, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
21:55:44.735346 IP (tos 0x0, ttl 59, id 50294, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xcefc (correct), 3632:3632(0) ack 4168 win 49680
21:56:17.076742 IP (tos 0x0, ttl 126, id 25631, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: R, cksum 0x942e (correct), 4168:4168(0) ack 2827 win 0
*SQL session hangs here*The 'RESET' occurs when I kill the client using CTRL+C after a long period of inactivity, not during the session itself.
And then.. Here's a successful login and query of 7 rows on the Oracle 9 database from a network perspective:
SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
tcpdump: WARNING: bond0: no IPv4 address assigned
tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
21:53:27.598450 IP (tos 0x0, ttl 126, id 19396, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.61937 > 172.x.x.x.1521: S, cksum 0xc9b4 (correct), 2519356327:2519356327(0) win 64512 <mss 1380,nop,nop,sackOK>
21:53:27.612189 IP (tos 0x0, ttl 53, id 46015, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: S, cksum 0x1cdb (correct), 1010936359:1010936359(0) ack 2519356328 win 49680 <mss 1460,nop,nop,sackOK>
21:53:27.612905 IP (tos 0x0, ttl 126, id 19398, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0x0faf (correct), 1:1(0) ack 1 win 64512
21:53:27.616233 IP (tos 0x0, ttl 126, id 19399, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 1:282(281) ack 1 win 64512
21:53:27.629987 IP (tos 0x0, ttl 53, id 46016, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4886 (correct), 1:1(0) ack 282 win 49680
21:53:27.692135 IP (tos 0x0, ttl 53, id 46017, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: P, cksum 0x3d6e (correct), 1:9(8) ack 282 win 49680
21:53:27.693603 IP (tos 0x0, ttl 126, id 19402, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 282:563(281) ack 9 win 64504
21:53:27.707460 IP (tos 0x0, ttl 53, id 46018, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4765 (correct), 9:9(0) ack 563 win 49680
21:53:27.707883 IP (tos 0x0, ttl 53, id 46019, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.61937: P 9:41(32) ack 563 win 49680
21:53:27.711950 IP (tos 0x0, ttl 126, id 19403, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.61937 > 172.x.x.x.1521: P 563:719(156) ack 41 win 64472
21:53:27.725971 IP (tos 0x0, ttl 53, id 46020, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.61937: P 41:168(127) ack 719 win 49680
21:53:27.734468 IP (tos 0x0, ttl 126, id 19405, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.61937 > 172.x.x.x.1521: P 719:756(37) ack 168 win 64345
21:53:27.748270 IP (tos 0x0, ttl 53, id 46021, offset 0, flags [DF], proto: TCP (6), length: 199) 172.x.x.x.1521 > 125.x.x.x.61937: P 168:327(159) ack 756 win 49680
21:53:27.878720 IP (tos 0x0, ttl 126, id 19409, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
21:53:28.994991 IP (tos 0x0, ttl 126, id 19443, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
21:53:29.010680 IP (tos 0x0, ttl 53, id 46023, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3d83 (correct), 1276:1276(0) ack 1826 win 49680
21:53:32.561849 IP (tos 0x0, ttl 53, id 46024, offset 0, flags [DF], proto: TCP (6), length: 989) 172.x.x.x.1521 > 125.x.x.x.61937: P 327:1276(949) ack 1826 win 49680
21:53:32.710661 IP (tos 0x0, ttl 126, id 19550, offset 0, flags [DF], proto: TCP (6), length: 223) 125.x.x.x.61937 > 172.x.x.x.1521: P 1826:2009(183) ack 1276 win 63237
21:53:32.724384 IP (tos 0x0, ttl 53, id 46025, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3ccc (correct), 1276:1276(0) ack 2009 win 49680
21:53:32.732636 IP (tos 0x0, ttl 53, id 46026, offset 0, flags [DF], proto: TCP (6), length: 133) 172.x.x.x.1521 > 125.x.x.x.61937: P 1276:1369(93) ack 2009 win 49680
21:53:32.739922 IP (tos 0x0, ttl 126, id 19553, offset 0, flags [DF], proto: TCP (6), length: 947) 125.x.x.x.61937 > 172.x.x.x.1521: P 2009:2916(907) ack 1369 win 63144
21:53:32.763266 IP (tos 0x0, ttl 53, id 46027, offset 0, flags [DF], proto: TCP (6), length: 329) 172.x.x.x.1521 > 125.x.x.x.61937: P 1369:1658(289) ack 2916 win 49680
21:53:32.770925 IP (tos 0x0, ttl 126, id 19555, offset 0, flags [DF], proto: TCP (6), length: 78) 125.x.x.x.61937 > 172.x.x.x.1521: P 2916:2954(38) ack 1658 win 64512
21:53:32.784774 IP (tos 0x0, ttl 53, id 46028, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 1658:1836(178) ack 2954 win 49680
21:53:32.787455 IP (tos 0x0, ttl 126, id 19556, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
21:53:33.478760 IP (tos 0x0, ttl 126, id 19578, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
21:53:33.492256 IP (tos 0x0, ttl 53, id 46030, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34ce (correct), 2268:2268(0) ack 3063 win 49680
21:53:36.820908 IP (tos 0x0, ttl 53, id 46031, offset 0, flags [DF], proto: TCP (6), length: 472) 172.x.x.x.1521 > 125.x.x.x.61937: P 1836:2268(432) ack 3063 win 49680
21:53:36.824225 IP (tos 0x0, ttl 126, id 19733, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 3063:3080(17) ack 2268 win 63902
21:53:36.837345 IP (tos 0x0, ttl 53, id 46032, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34bd (correct), 2268:2268(0) ack 3080 win 49680
21:53:36.838015 IP (tos 0x0, ttl 53, id 46033, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 2268:2338(70) ack 3080 win 49680
21:53:36.839520 IP (tos 0x0, ttl 126, id 19734, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3080:3119(39) ack 2338 win 63832
21:53:36.853507 IP (tos 0x0, ttl 53, id 46034, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2338:2516(178) ack 3119 win 49680
21:53:36.855886 IP (tos 0x0, ttl 126, id 19735, offset 0, flags [DF], proto: TCP (6), length: 160) 125.x.x.x.61937 > 172.x.x.x.1521: P 3119:3239(120) ack 2516 win 63654
21:53:36.870292 IP (tos 0x0, ttl 53, id 46035, offset 0, flags [DF], proto: TCP (6), length: 99) 172.x.x.x.1521 > 125.x.x.x.61937: P 2516:2575(59) ack 3239 win 49680
21:53:36.879557 IP (tos 0x0, ttl 126, id 19738, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3239:3278(39) ack 2575 win 63595
21:53:36.893506 IP (tos 0x0, ttl 53, id 46036, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2575:2753(178) ack 3278 win 49680
21:53:36.895884 IP (tos 0x0, ttl 126, id 19739, offset 0, flags [DF], proto: TCP (6), length: 292) 125.x.x.x.61937 > 172.x.x.x.1521: P 3278:3530(252) ack 2753 win 63417
21:53:36.911464 IP (tos 0x0, ttl 53, id 46037, offset 0, flags [DF], proto: TCP (6), length: 305) 172.x.x.x.1521 > 125.x.x.x.61937: P 2753:3018(265) ack 3530 win 49680
21:53:36.913580 IP (tos 0x0, ttl 126, id 19740, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3530:3569(39) ack 3018 win 63152
21:53:36.927515 IP (tos 0x0, ttl 53, id 46038, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3018:3196(178) ack 3569 win 49680
21:53:36.938328 IP (tos 0x0, ttl 126, id 19742, offset 0, flags [DF], proto: TCP (6), length: 315) 125.x.x.x.61937 > 172.x.x.x.1521: P 3569:3844(275) ack 3196 win 64512
21:53:36.953008 IP (tos 0x0, ttl 53, id 46039, offset 0, flags [DF], proto: TCP (6), length: 183) 172.x.x.x.1521 > 125.x.x.x.61937: P 3196:3339(143) ack 3844 win 49680
21:53:36.961020 IP (tos 0x0, ttl 126, id 19743, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3844:3883(39) ack 3339 win 64369
21:53:36.974890 IP (tos 0x0, ttl 53, id 46040, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3339:3517(178) ack 3883 win 49680
21:53:36.977183 IP (tos 0x0, ttl 126, id 19744, offset 0, flags [DF], proto: TCP (6), length: 208) 125.x.x.x.61937 > 172.x.x.x.1521: P 3883:4051(168) ack 3517 win 64191
21:53:36.991461 IP (tos 0x0, ttl 53, id 46041, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 3517:3587(70) ack 4051 win 49680
21:53:36.993439 IP (tos 0x0, ttl 126, id 19747, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4051:4090(39) ack 3587 win 64121
21:53:37.007199 IP (tos 0x0, ttl 53, id 46042, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3587:3765(178) ack 4090 win 49680
21:53:37.011239 IP (tos 0x0, ttl 126, id 19748, offset 0, flags [DF], proto: TCP (6), length: 183) 125.x.x.x.61937 > 172.x.x.x.1521: P 4090:4233(143) ack 3765 win 63943
21:53:37.025767 IP (tos 0x0, ttl 53, id 46043, offset 0, flags [DF], proto: TCP (6), length: 210) 172.x.x.x.1521 > 125.x.x.x.61937: P 3765:3935(170) ack 4233 win 49680
21:53:37.027455 IP (tos 0x0, ttl 126, id 19750, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4233:4272(39) ack 3935 win 63773
21:53:37.041382 IP (tos 0x0, ttl 53, id 46044, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3935:4113(178) ack 4272 win 49680
21:53:37.044708 IP (tos 0x0, ttl 126, id 19751, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4272:4307(35) ack 4113 win 63595
21:53:37.058388 IP (tos 0x0, ttl 53, id 46045, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4113:4129(16) ack 4307 win 49680
21:53:37.060398 IP (tos 0x0, ttl 126, id 19752, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4307:4342(35) ack 4129 win 63579
21:53:37.073926 IP (tos 0x0, ttl 53, id 46046, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4129:4145(16) ack 4342 win 49680
21:53:37.088056 IP (tos 0x0, ttl 126, id 19753, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xf23e (correct), 4342:4342(0) ack 4145 win 63563
21:53:56.309909 IP (tos 0x0, ttl 126, id 20509, offset 0, flags [DF], proto: TCP (6), length: 176) 125.x.x.x.61937 > 172.x.x.x.1521: P 4342:4478(136) ack 4145 win 63563
21:53:56.325783 IP (tos 0x0, ttl 53, id 46047, offset 0, flags [DF], proto: TCP (6), length: 398) 172.x.x.x.1521 > 125.x.x.x.61937: P 4145:4503(358) ack 4478 win 49680
21:53:56.329152 IP (tos 0x0, ttl 126, id 20511, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
21:53:56.557234 IP (tos 0x0, ttl 126, id 20519, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
21:53:56.570496 IP (tos 0x0, ttl 53, id 46049, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24ea (correct), 4904:4904(0) ack 4495 win 49680
21:53:58.561449 IP (tos 0x0, ttl 53, id 46051, offset 0, flags [DF], proto: TCP (6), length: 441) 172.x.x.x.1521 > 125.x.x.x.61937: P 4503:4904(401) ack 4495 win 49680
21:53:58.602228 IP (tos 0x0, ttl 126, id 20579, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4495:4534(39) ack 4904 win 64512
21:53:58.615281 IP (tos 0x0, ttl 53, id 46052, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24c3 (correct), 4904:4904(0) ack 4534 win 49680
21:53:58.616571 IP (tos 0x0, ttl 53, id 46053, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 4904:5082(178) ack 4534 win 49680
21:53:58.745531 IP (tos 0x0, ttl 126, id 20584, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xead2 (correct), 4534:4534(0) ack 5082 win 64334
21:54:01.476582 IP (tos 0x0, ttl 126, id 20707, offset 0, flags [DF], proto: TCP (6), length: 53) 125.x.x.x.61937 > 172.x.x.x.1521: P 4534:4547(13) ack 5082 win 64334
21:54:01.492998 IP (tos 0x0, ttl 53, id 46054, offset 0, flags [DF], proto: TCP (6), length: 53) 172.x.x.x.1521 > 125.x.x.x.61937: P 5082:5095(13) ack 4547 win 49680
21:54:01.499924 IP (tos 0x0, ttl 126, id 20709, offset 0, flags [DF], proto: TCP (6), length: 50) 125.x.x.x.61937 > 172.x.x.x.1521: P, cksum 0xe469 (correct), 4547:4557(10) ack 5095 win 64321
21:54:01.500558 IP (tos 0x0, ttl 126, id 20710, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: F, cksum 0xeaba (correct), 4557:4557(0) ack 5095 win 64321
21:54:01.513561 IP (tos 0x0, ttl 53, id 46055, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: F, cksum 0x23ec (correct), 5095:5095(0) ack 4557 win 49680
21:54:01.513628 IP (tos 0x0, ttl 53, id 46056, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x23eb (correct), 5096:5096(0) ack 4558 win 49680
21:54:01.514175 IP (tos 0x0, ttl 126, id 20713, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xeab9 (correct), 4558:4558(0) ack 5096 win 64321The above is obviously fine, but it's really quite strange. I can get the Oracle 9 queries to hang if I select over 7 rows (8 being the point at which it dies).
So I can run
Sqlplus user/[email protected]
Select * from <blah> where rownum < 7;Over and over again, as many times as I like without issue.
But!.. As soon as I run
Sqlplus user/[email protected]
Select * from <blah> where rownum < 8;The session will hang, and from a network perspective there are no packets being transferred in either direction. It looks exactly like the Oracle 11 session in that the session is still ESTABLISHED from a client perspective but no data is flowing in either direction..
Does anyone have any idea why '8' is the magic number that would be causing it to hang? I'm really stuggling to see from a network perspective how this may be occuring, as above the TCPDump looks clean.
Unfortunately I don't have access do a dump on the client/server itself however, just on the network path. I guess that may be where we need to be looking next.
Thanks for the ideas so far all, much appreciated.
Josh.

Error in Data Transfer Process (DTP) Urgent!

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nips

Please do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent!

HR Master Data Transfer to MRS

Hi Experts,
we have recently implemented MRS scheduling for PM orders and we ran three jobs to transfer work center data, capacities and personnel assignment from ECC6 HR (release 604/0020) into MRSS (release 700/0004) . The reports are /MRSS/SGE_PN_MNT , /MRSS/CAG_CG_PLANNING_NODE_MNT and /MRSS/HCM_RPTWFMIF. The data transfer took several days to run manually.
Now our customer wants to run nightly updates to MRS on any work centers/ Personnel records which have changed. Issues are:
u2022 /MRSS/CAG_CG_PLANNING_NODE_MNT short dumps if you execute in background
u2022 if PM users have work orders open when we execute the jobs, the useru2019s transaction can short dump (this can happen even if they are from a plant which is not related to the data being transferred)
How have other MRS users overcome these issues of regular HR master data updates?
Thanks in advance
Sarah

PFAL transaction is used when we want to transfer an object without a change pointer. For sending deltas you should be using RBDMIDOC (TRAN - BD21) and provide the message type . This program will send the delta.
But neither of the programs PFAL or BD21 will help in filtering the future dated record. This filtering should happen in an user exit for outbound IDoc. The user exit need to be coded to exclude a change pointer from processing if the key in CP contains a future dated record and that may get processed. This may get complex as you would like to send part of the changed record and not the other part of changed record. For example if you create a new IT0002 with future date, you would still want the current record which was delimited one day prior to future dated record.
It would be nice to have the target system handle this instead of handling it within SAP.
Regards
Ravikumar

Regd Data Transfer routine Transport

Hello All,
I have created a Copy Control Data Transfer routine 60X in the Development System. This created a Include RV45C60X in the Include RV45CNNN. When I check the where used list for RV45C60X it shows Include RV45CNNN. When I transported it to Quality System this Include was created but it was not in the Include RV45CNNN and the system was giving a short dump when SO created with reference to Quote.
I executed the program RV80HGEN and than also generated the Program RV45CNNN in the Quality system. Than the Include RV45C60X was shown in Include RV45CNNN and the system works fine. The where used list for RV45C60X does not show RV45CNNN even though it is in the Include RV45CNNN. Is that ok or something more needs to be done.
Can you please clarify.
Thanks,
SNK.

Hello friends,
Any suggestions for this. Or is this not an issue.
Thanks,
SNK.

TWAIN data transfer error

NEW! When I try to scan (CANON 8400F scanner) into my desktop (WindowsXP) I now get an error message (code 2,178,0) followed by the message "TWAIN data transfer error". Can this be fixed? sunnycroft

Hello sunnycroft.
Uninstalling and reinstalling the drivers may resolve this issue. Please perform the following:
1. Click Start and open the Control Panel.
2. Open the Add or Remove Programs option.
3. Uninstall the CanoScan 8400F and the Canon CanoScan Toolbox.
4. Close all windows that are open.
Once this has been done, ensure that the scanner has been disconnected. Then reinstall the unit be downloading the Drivers and CanoScan Toolbox from our website at the following link.
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSof...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Fast Data Transfer over Internet

Hello friends:
i need your help to transfer Data.
i have few servers and some of them are really stuffed with huge amount of data on them.
i want to move my data to other servers.
i dont have a telnet access and more ever i dont want to remain connnected till the time the task is over.
can you recommend a faster way of Data transfer over internet.
awaiting your reply.
regards

Why don't you dump the data to a tape, send the tape to the other server, and reload it there? That can be faster than sending the data over the network if it's large.

How to find the max data transfer rate(disk speed) supported by mobo?

I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Data transfer toolbox dump

Similar Messages

Maybe you are looking for