DATA TRANSFER urgent
Hi
how to transfer data dynamically from selection screen to std transaction.
pls its urgent
Hi,
You can use the SET PARAMTER from the program, you wil have the fields for the selection screen then use the SET APRAMTER to pass the values
Regards
Sudheer
Similar Messages
-
Inbound IDOC with Master data transfer -- Urgent.
Hi Techie's,
I have got a requirement, SAP System interfaces with the Legacy system ( DB2). when ever there is a change in data base table of Legecy an Idoc should hit the SAP system and should update the SAP Database immediately.
I would like the programming approches and methods like change pointers / message control ?
Good solutions will be rewarded.
Regards,
RAMHi Dayakar Reddy,
Can you tell us how you solved the issue?
Thanks
Chris -
ALE Data Transfer - Urgent help needed
I am trying to set up an ALE interface from a SAP ECC 6 system to another SAP ECC 6 system using HRMD_A idocs. The complication I have is in the receiving system, I need to generate a new PERNR for all employees transferred.
Can anybody advise how to go about doing this?
Many thanks
JezHi you can send the employees from sender system to reciever system.
With the help of transaction pfal you can send the personnel number.
You have to choose the ploan version 01
object type will be p
in object id write the employee number which will be transferred to the reciever system
Then push the run button.
But you have to configure HRMD_A in ALE implementation. -
Error in Data Transfer Process (DTP) Urgent!
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nipsPlease do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent! -
Internal candidates Data transfer in E recruiting..Urgent
Hi experts,
How to transfer internal candidate's data from E-recruting to PA??
Please reply its urgent
Thanks
Sameer
Edited by: sameer dhuke on Mar 17, 2008 9:54 AMHi sameer,
you have to go to the ecc to hire the person as the information from e-recruiting is far not enough to process a hiring. currently standard data transfer brings ~15 fields to the ecc while the complete hiring action will probably have >100 fields.
To do the hiring from e-recruiting you would have not only get the information into e-recruiting first, but also get all the business logic combined. Things which sound easy can get quite complicated e.g. the name. In all projects i took part so far firstname is no required field as the companies attract applicants from around the world and there are countries where having only one name is common. So firstname can't be a required field in e-recruiting but in PA the field is required as it is necessary for social insurance, taxes and stuff (these people really get a second name to be processed when getting a work permit). You would have to get all the logic on country specific name requirements to e-recruiting. Furthermore you separate the systems to separate the data. Data security guys would get crazy if you could run complete hiring actions / organizational change action from e-recruiting accessing payment data, banking information, CB information, information on related persons ... .
For additional documents I have to disappoint you. I do not have more than the standard stuff you get from sap net rest of my knowledge results from various rollouts.
Best Regards
Roman -
Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required
Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!error is clear, check your abap code.
-
Data transfer process(urgent)
Hi bw gurus,
can any one help me on data transfer process .i need to prepare the ppt on this .plz help me out in this..
thanks in advance
uma reddyHi Uma,
Check out the below link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/content.htm
In BI 7,using info packages you can only load data upto PSA. To load the data from PSA to data targets we use DTP's.
Hope this helps.
Cheers
Praveen -
Employee Data Transfer From Recruitment to PA
Hi All,
I have a query pertaining to employee data transfer from recruitment (PBA7) to PA.
Here the client uses recruitment module only for data maintenance and then transfer the data to PA module. Is it possible if we skip the data transfer from Rec. module to PA module.
Please advise URGENTLY.
Regards,
GarimaGarima,
If your query is resolved, request to close the thread or else feel free to touch base
Thanks and Regards
Anil -
How to find the max data transfer rate(disk speed) supported by mobo?
I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section. -
ISSUE:regarding production version tab of MRP4 of data transfer using BD10
Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA -
We run a small network in our office consisting mainly of Intel iMacs we purchased several months ago. The server computer is a brand new Intel Mac Pro server with 4 500 gig drives raided together, two 2.66GHz dual core intel processors, all the other bells and whistles we could think of, etc. We added in two fiber-optic switches: one in the server room, one in the office. The switches connect to each other and the server with fiber optic cables, but the iMacs connect with ethernet cables.
We had the iMacs for a while but we just recently got the new server and upgraded our old 100 base switches. Afterwards we wanted to test out the data transfer speeds, as we plan to back up to the server frequently. We were dismayed to find that transfer rates capped out at 60 MegaBytes/sec according to the Activity Monitor's Network Activity tab. In fact, it would range mostly from 40-45MB/sec. None of us here have much experience with networking, but that seemed a tad too slow. My basic math tells me that a byte is 8 bits, and from that a Gigabit network should transfer data at 120 MegaBytes/sec, which is three times the speeds we were actually seeing.
We sent data both to and from the server in order to test this. Thinking it was perhaps a problem with the ethernet itself, we grabbed an external FireWire hard drive and transferred data from one of the iMacs directly to it and noticed exactly the same transfer rates. We plugged two iMacs directly into each other and transferred at the same rate, ~45MB/sec.
Well this was highly frustrating. All Macs supposedly ship with Gigabit ethernet since, what, 2002? Earlier? Why are our speeds so slow? We thought the hard drives might be slow, so we got info on the drives and googled them for their tech specs. The iMacs' Western Digital drives are capable of much much faster speeds according to everything we've read.
We started reading anything we could online that addressed this issue. Some information read the problem might be that the optical DVD-R/CD-R drive was only capable of slower transfer speeds. Since the optical drive and the hard drive are on the same bus it would slow down the hard drive's maximum transfer rate, much like having a Gigabit hub with a 10 base computer plugged into it would slow the entire network down (which is of course why we use switches instead of hubs). Is there any truth to this? If this is, in fact, the case, can we bypass this bottleneck somehow? I'm not talking about opening the computer and manually disabling the optical drive, as that's a waste of a perfectly good DVD-R/CD-R drive.
Also, if this is true, why in blue blazes is Apple flaunting Gigabit ethernet if the computer can only take advantage of 1/3 the speeds Gigabit ethernet has to offer?! I'll happily provide any more information that's relevant to the problem at hand.
Thank you
Mac OS X (10.4.8)Here's the specs for the default Hard Drive that Apple put in here:
http://www.westerndigital.com/en/products/Products.asp?DriveID=137
From that page
Buffer To Host (Serial ATA) 300 MB/s (Max)
Buffer To Disk 748 Mbits/s (Max)
I have no idea what signaling overhead for my data transfer protocol means.
The ethernet cords are no longer than 20 feet, are all Cat5E, and are well shielded. There is little to no ElectroMagnetic interference in any area they run. The longest cable is the Fiber Optic one, which runs about... oh... 40 yards? These were all installed by professionals.
I feel it's important to stress the fact that we tested an isolated direct computer to computer transfer with a single 6 foot Cat5E Ethernet cable and still experienced the same speeds that we experienced over the network. We tested multiple computers, multiple cables, multiple files. -
Issues with data transfer / connectivi​ty
Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
ThanksYou can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com -
Init w/o data transfer shows Added/Transfrd - 1/1
Hi ,
Init w/o data transfer load was successful after having applied <i>Note 689964 - ODS object: Switching from a full to delta upload !</i>
I have two weird ( nt sure ) issues below :
<b>Issue 1</b>
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?
<b>
Issue 2</b>
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
Please comment SDNer'sDear Jr.Roberto,
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?
<b>
--> When you do a init with out data transfer, system transfers one record that is not corresponding to the data, but is a control record corresponding to the init selections.</b>
Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
<b>---> It is because you dont have a active update rules maintained for the infosource to the data target, or you have not selected any data target in the infopackage , it can also be the case that the infopackage which generates a program to start the load is having some errors, if possbile create another infopackage and start the load with active Update rules to data target.</b>
Cheers!!!!
Charan
Message was edited by:
Sri Krishna Charan Viswanatha -
Hello Everyone,
I have a new 2TB Time Capsule running with a MacBook Air. I want to use the TC to access data (Aperture library, iTunes library, other Files) and to backup my MacBook Air via Time Machine. I set it up, integrated the TC in my Network (FritzBox) by choosing "extend existing network" and it works. BUT only with 1.1Mbit/second while writing or reading Data to/from it. Internet speed is very good, like it was before. While the 1.1Mbit/second seem to be ok with Aperture and iTunes (streaming music and movies) it is still painfully slow and I'm not realy happy with that
I've read that:
The 1.1Mbit problem is pretty common when Time Capsule is integrated and used to extend a network (bridge modus), it also looses all ethernet connectivity then (that woul explain why connecting it by ethernet didn't help during initial setup and data transfer)
Is there a solution besides ditching the Fritzbox and using the TC to build the network? Because basicly I still need the Fritzbox for its DECT features.
Thank you for any help in advance and have a nice day,
OlliYou have double hop wireless with this setup..
You should bridge the TC.. that is router bridge not wireless bridge, and plug the TC into the Frizyboy by ethernet.
Then you can setup the TC wireless to reinforce the fritzy..
Same wireless name as SSID.
Same security settings... really should be WPA2 AES or in TC personal.
Same password..
Just different wireless channel.
Then you can use 5ghz on the TC if you are up close and personal. -
Data transfer b/w SAP to Java using IDOC and Interface SAP Jco
Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VELHi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P
Maybe you are looking for
-
Error when selecting system during scheduling of background job in RAR
Hi, I am getting an error when I attempt to schedule a background in RAR. It happens when I go to the multiple system selection option. I select a system and click copy. An error example below appears in the logs even when I dont go ahead and schedul
-
Edit in Photoshop shows a black photoshop window
I have the latest version of Lightroom and Photoshop. Whenever I right click to open the image in photoshop, photoshop window opens with a black screen. It don't open the image.
-
How can i use the gui of the operating system
hi i am working with the gui and i want to ask how can the gui of the java be like the operating system.. ex : i want the buttons and the frame be like the windows xp .. not appear as default..
-
BPC 10.1 Unified Environment
Hello Experts, My client has some questions around unified environment.Please help me understand it better 1) If we have a bpc model exactly same in classic environment and an unified environment,Will the model in unified environment be faster in per
-
Runtime error MESSAGE_TYPE_Xn in SE16 during Download
Hi, When I try to download data in SE16 or when I try to display the data in SE16 in an excel sheet I get a short dump MESSAGE_TYPE_X I think it is user dependent because my collegues in the project dont get this short dump. I compared the SAP Logon