Data transfer via thunderbolt

WWould external hard disks connected to a Mac mini in target disk mode be accessible from another Mac mini connected via thunderbolt?

Hi bj1234,
Target Disk Mode will only show drives that are internal to the connected Mac, not external drives. See this article -
How to use and troubleshoot FireWire target disk mode
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

Does iPhone SDK support the feature of data transfer via Bluetooth or USB?

Hi,
I'm developing a application in which I want a feature for data transfer either using Bluetooth or USB.
Does iPhone SDK support this feature of data transfer via Bluetooth or USB?
Please help me.
Thanks.

The SDk doesn't deal with BlueTooth or USB. Your only option is wireless data. (WiFi, 3G, etc)

N95 crashes in Data transfer via USB cable, help?

I ve been using my N95 with no problems for more than a year. Sometime ago I bought a new 8Gb Micro SDHC memory card, it was recognised by the phone and worked perfectly. But after the card was stored with data for more than 1gb, the phone crashes everytime I try to copy even the smallest file on the memory card through Data transfer mode via USB cable. Than I try to copy a file an error message is displayed in Windows XP and the phone reboots. The strangest thing that I can copy without a problem even a 500 mb movie file to the phone if the stored space on the memory card is say like 985mb, but after that it will crash even with the copying a 10 kb text file.
Any help would be appreciated.

No, its not the file system or Memory card itself - cause transfering a data through a card reader works fine and the phone recognize correctly everything transfered. Can it be the case of USB cable driver? May be I need to install it or go for a newer version? BTW, I removed Nokia PC Suite from my notebook - cause I dont used it much, but this program still used a lot of my PC resources without asking to. I belive that PC Suite is not nesessary for using the phone through a Data Transfer mode?

Data transfer via ipod video

Does iTunes or any other software need to be installed on a remote computer to do data transfer?
(Ie. transfering data from school/work where I wouldn't be allowed to install software)

No, all you need to do is go into itunes prefs -> ipod and set it to mount as an external device.
And i believe to acesses the external device in windows you have to go to start -> My computer... and you should see the ipod as an external device.

Data transfer via Rfcs

Whenever the material master is created in ECC RFCs are triggered and the data is transferred to GTS via RFCs
(no idocs are triggered)
Is there any way out to stop this transfer
how can can we know the mapping of what fields of ECC are mapped to which fields of the other system
please advice

Hi,
let us say outbound is SAPLID server
and inbound is SAPLER server.
we need to following setting in order to generate idocs. You can see the generated IDOC in WE02 TCode.
Status code should be 03.
In SAPLID Server :
1. In the SALE transaction,
     - Application Link Enabling (ALE) --> Sending and Receiving Systems --> Logical Sysems --> Define Logical Systems
          - Click on 'New Entries'
          - Enter 'Logical System' & 'Name'.
               SAPLID             Logical System for the server SAPLID
               SAPLER              Logical System for the server SAPLER
          - Save it.
         - Application Link Enabling (ALE) --> Sending and Receiving Systems --> Logical Sysems --> Assign Client to Logical             System.
          - Client : 800          Sending system
            City : Hyderabad
            Logical System : SAPLID
            Std Currency : INR
            client role : Demo
     - Application Link Enabling (ALE) --> Sending and Receiving Systems --> Systems in Network --> Define Target Systems
       for RFC calls.
          - Select 'R/3 Connections' and click on 'Create' icon.
          - RFC Destination : SAPLER
            Connection type : 3
            Descripiton : RFC for Destination Server SAPLER
            Target host : SAPLER
            System Number : 00
          - Logon/Security
            Language : EN
            Client : 800
            User : USER6
            Password : RGSHYD
          - Click on 'Test Connection'.
          - Click on 'Remorte Logon'.
2. WE 81 Message type config (DEBMAS - Customer Master)
3. WE 30 Idoc type (DEBMAS06 - Customer Master data distribution)
4. WE 82 - Adding Message type to Idoc type.
    DEBMAS ---> DEBMAS06
5. WE20 Partner Profile
     Partner No : SAPLER
     Par.Type   : LS
     Type         : US
     Agent      : USER6
   OUtbound Parameters :
   Message type    : DEBMAS
   Receiver Port   : Zbkpfport
Transfer Idoc Immediately
   Basic type      : DEBMAS06
6. BD64 MOdel View
     - Select 'model view' and click on Create Model View.
     - Technical Name : CUSTMODEL
        - Place the cursor on 'CUSTMODEL' and click on 'Add message type'.
          - Model View : CUSTMODEL
          - Sender : SAPLID
          - Receiver : SAPLER
          - Message type : DEBMAS
     - Save it
     - Environment --> Generate Partner Profile
     - Edit --> Modelview --> Distribute
7. XD01 Create Customer Master
     - Create Customer Number : 0000000001
8. BD12 Sending Customer Data
     - Customer : 0000000001
     - OUtput type : DEBMAS
     - Logical System : SAPLER
     - Execute it
9. WE02 Idoc List
     - Direction : 1
     - Logical Message : DEBMAS
     - Execute it.
in case if your IDOC is generated with errors (status would be red signal) get back me with status code.
Regards
Srikanth

Profit Center Master Data transfer via ALE (ke77) == Additional fields

Hi SAP Community,
I am using ke77 to transfer Profit Center Master Data. We have introduced an additional field in the master data which is unfortunately not transferred via ke77 (non SAP std field). Do you guys know how to include user-defined fields via ke77 (user exit, etc...)?
Thanks in advance for your support.
Cheers,
Chris

you must not create all segments in the IDOC if you dont want the views.
e.g. E1MBEWM is used for the accounting data. without this you wont get that view.

Can't backup in time machine or upgrade to Maverick or Yosemite, can I still transfer via thunderbolt?

I have a macbook pro 17 inch, Mid 2010 OSX 10.8.5. I currently have no back up as both my previous seagate and now my Lacie external drives won't back it up with the time machine. I get a box stating an error occurred and it quits after about 10GBs. In addition, the laptop fails to install Maverick and Yosemite when I have attempted to install them. For work I have just got a 15 inch Macbook Pro Retina. I obviously need all the data and files from my old laptop, if I were to transfer all the programs etc, would it likely transfer the problem that stops my computer from backing up? or is it more likely a hard drive problem and won't affect the new laptop?
I have followed trouble shoot and looked at previous posts but haven't been able to find a solution. Also I have gone on disk utility and verified the disk and all is fine there, so I am unsure what the problem is.
Ideally I can get working on the new 15" soon but I don't want to transfer over any problems.
Thanks

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Slow data transfer via gpip from tek scope

I have tds 1012 scope, we are trying to tranfer the waveform from the scope real-time. The time required for the transfer is about 400ms, however the data is generation is once in 100ms. This means that we are missing 3/4 of the data. Is there any way to get around this problem.

Hello,
I did not understand very well the problem. How much data do you want to transfer in one second? The GPIB would communicate at the rate the instrument needs if you are configuring everything ok. If the data in the scope cannot be transferred at the desired rate then the only thing is to store the data into a file or into a buffer in the computer and then analyze it. If what is happening is that the scope does generate the data but the GPIB doesn�t communicate it at the desired rate, what could be happening is that you might be opening and closing a GPIB or VISA session every time you read and that is not efficient because there is a lot of time lost . What you need to do is open the session once, then have in a loop the read or write and outside the
loop close the session. So open and close are outside.
You can also check if you can set a bigger buffer in the instrument so the data will not be lost, but remember that the amount of data that can be transferred with GPIB is huge so that shouldn�t be the problem. I think the problem is the way your program reads the data or by the some setting in your instrument.
Hope this helps
Ricardo S.
National Instruments

Migration assistant won't work via thunderbolt in Mavericks

I've followed exactly the instructions for doing a migration assistant data transfer via thunderbolt, per this document:
http://support.apple.com/kb/HT5872?viewlocale=en_US
My target computer will not see my source computer via thunderbolt. If I turn on wifi, it will see it, but it says it will take 50+ hours to transfer. I have a thunderbolt cable and two thunderbolt equipped macs running Mavericks (mid 2011 iMac --> late 2013 MBP Retina).
Anyone have any thoughts on a solution?

Go to System Preferences on the Old Mac, locate Start Up Disk in 4th Row of Icons, Select Start Computer in Target Disk Mode.
On New Mac /Applications/Utilities/Migration Assistant
Once in Migration Assistant Select From Another Mac, Startup Disk, Time Machine Backup, or Disk
Then on next Screen Choose from a Disk
To Migrate Old Photos, Music, and Documents select and check Users and choose Specific User
Choose Applications to Migrate Applications, other data and settings as well
If you encounter the Problem, where the username of the old folder is the same as the username of the home folder on the New Mac, Look at PH14081 and complete steps 6-15 to merge old folder with new folder.
http://support.apple.com/kb/PH14081
6. Change Name of old folder to accountname1
7. Migrate
8. After Migration Go to New Admin User, Create a Test User, Log out of new Admin and into Test User
9. When in Test User Delete New Admin User and Home Folder, Do not do this Securely as it will take some time to complete
10. Once New admin and folder are deleted go into Finder select Username1 Folder, Control Click or Two Finger Click for Trackpads > Select Get Info, Change accountname1 to accountname
11. Go back into System Preferences> Create New User with "accountname" as new accountname, set Admin Password>Select Create New User
12. Dialogue Box will Appear A folder already exists with this Username>select use Existing Folder
13. Log out of Test User into Username>System Prefrences>Delete Test User

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

Any data transfer app (wifi)?

Is there an app that would allow data transfer via Wifi (to a server or other computer) for the purpose of transferring videos I edited in iMovie on the IP4 without having to get them super compressed as it's currenty done on the iPhone?

Not sure if you've found the answer.
Apple has some thoughts:
http://docs.info.apple.com/article.html?artnum=301580
Not sure if this is your precise issue. You don't give us enough of the error msgs.

Connect mac via thunderbolt

Hello,
I was messing around with my 2011 imac, retina display macbook pro and a thunderbolt cable. I wondered wether it would be possible for the to computers to be "connected", not via any target mode (display or disc). just connected, i know it sounds weird but i think it would be cool to work on both computers with one mouse and keyboard. This way i dont have to switch from one pc to another. Besides using 1 keyboard, sharing files would be super easy.
I was wondering if a function like this exists. If not, apple please look in to it. I hate restarting my macbook or imac for file transfer via thunderbolt...
Thanks in advance!

See Target Display Mode And Thunderbolt.

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Unable to connect via "Data Transfer" Mode On N95 ...

Its been happening for a little while now. When i plug the USB cable in, it asks if i wanna connect via PC Suite, Data Transfer etc
When i click Data Transfer it says the following:
"Unable to activate Data Transfer Mode. Mass Memory is in use by another application"
Does anyone know the fix for this problem?
Many thanks
Message Edited by tiff777 on 06-Nov-2008 07:56 PM
Message Edited by tiff777 on 06-Nov-2008 07:57 PM

Hi There
Im not sure this would work for you all but i came accross this discussion after suffering the same problem and after pulling my hair out i finally solved it and thought it was only fair i posted how.
I had tried all options on here apart from deleteing everything off my memory card ( i wasn't keen on this option ) i checked the running apps and it just showed that standby was running,
So i thought i would try uninstalling recently installed item one by one, i had recently installed some software called CALL RECORDER and although it was not showing up that it was running it was in the background after deleting this the problem was solved ,
So try and think if there are any apps that you have installed that may be running in the background but not showing up , i would advise deleting these one by one as i did and if it still doesnt work you can reinstall it ,
hope this helps
BUT EVEN AFTER ALL THIS I STILL LOVE MY N95 8GB !!!!!!!!!!!!!!!!!!!!!!!

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

Data transfer via thunderbolt

Similar Messages

Maybe you are looking for