Data trasfer to file

Hi,
I want to trasfer the data from two internal tables to a single table.Both the internal tables are interconnected.
One is for header values and other for items details. I tried to do as :
LOOP AT g_t_bkpf.
    TRANSFER g_t_bkpf TO l_output_file.
    LOOP AT g_t_bseg where bukrs = g_t_bkpf-bukrs    and belnr = g_t_bkpf-belnr.
     TRANSFER g_t_bseg TO l_output_file.
     ENDLOOP.
ENDLOOP.
Its giving an error. I want the layout of the file as :
Document Header details
          Item1
          Item2 and so on...
Please help

Hi,
I tried to the same, but data in the tables are as:
g_t_bkpf :
doc_no, year, and so on.. that is unique.
but in g_t_bseg:
details for each items for that particular doc no.
If i combine both, it contain,
unique details - item 1
unique details - item 2
and it dont want like tht. It need to be as
unique details:
Item1
Item2

Similar Messages

Periodic Data Trasfer using LSMW

Dear All,
How to do periodic Data trasfer using LSMW?
For this, is it necessary to use File from Application Server only (& not from PC)?
How the Last Extra Step will be processed?
Please help.
Thanks in advance.
Kind Regards,
Prasad

Hi,
refer
https://forums.sdn.sap.com/click.jspa?searchID=10949951&messageID=5211212
Regards
Kiran Sure

HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

Hai Frnds,
i Attend an interview they asked this questions can u know the answeres . tell me .
In File to file scenario how can we reprocess records which failed records.
HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
Thanks in advance
thahir

Hi,
Refer these links:
this might help you
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
validating against schema file for the output XML file
Informing the sender about bad records
Regards,
Nithiyanandam

Cannot Interpret the data in the file

Hi,
I need to upload rate routing and I have created a BDC program using a sample recording.
While I am uploading the data from the flat file, I am getting an error message " Cannot Interpret the data in the file ".
Please help me where I might have gone wrong. I have checked with template in the flat file and it is correct.
Please do the needful.
Thanks,
Ranjan R Jinka
Edited by: Ranjan Jinka on Apr 29, 2011 8:55 AM

Hai Ranjan,
Please, Check this
" Can not interpret the data in file " error while uploading the data in DB
- Check the heading of the excel column and filed used in program.
If possible, please paste the program so the viewers have a better idea and you will get the exact solution.
Regards,
Mani

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
Priya

Hi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon

No Data in PDF file in FTP server

Hi All,
I am trying to place a PDF file in FTP server.
Used
CONVERT_OTFSPOOLJOB_2_PDF to convert spool to PDF
SCMS_TEXT_TO_XSTRING
FTP_R3_TO_SERVER to transfer data to FTP.
I am able to see PDF file in FTP and no of pages matches with that of R/3 but there is no data in PDF file.

To get pdf file , you need to set the itcpo-tdgetotf = 'X' and need to pass in the exporting parameter (options in open_form function module ).Then in close_form function module take all the data of otfdata table into an internal table . Then use SX_OBJECT_CONVERT_OTF_PDF function module to convert it to pdf.
I will show with an example.
tables itcpo.
DATA: ch_otf TYPE STANDARD TABLE OF itcoo.
DATA: w_otf TYPE itcoo.
DATA: w_pdf TYPE solisti1. "For PDF
DATA: i_content_txt TYPE soli_tab.
DATA: temp1 TYPE sx_format VALUE 'OTF',
        temp2 TYPE sx_format VALUE 'PDF'.
DATA: c_printer TYPE sx_devtype VALUE 'PRINTER'.
DATA: w_transfer_bin TYPE sx_boolean. "Content
DATA: i_content_bin TYPE solix_tab, "Content
        wa_content_bin TYPE solix,
        i_objhead TYPE soli_tab.
itcpo-tdnoprint = 'X'.
itcpo-tdpreview = 'X'.
itcpo-tdgetotf = 'X'.
These three parameters need to be passed along with other required parameters
CALL FUNCTION 'OPEN_FORM'
       EXPORTING form = xformular
                 language = ekko-spras
                 OPTIONS = itcpo
                 archive_index = toa_dara
                 archive_params = arc_params
                 device = xdevice
                 dialog = xdialog
                 mail_sender        = sender
                 mail_recipient     = recipient
       EXCEPTIONS canceled = 01.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = RESULT
    tables
      otfdata = ch_otf.
LOOP AT ch_otf INTO w_otf.
    CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
    INTO w_pdf.
    APPEND w_pdf TO i_content_txt.
ENDLOOP.
converting otf file to pdf file
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
      format_src      = temp1        "'OTF'
      format_dst      = temp2        "'PDF'
      devtype         = c_printer
    CHANGING
      transfer_bin    = w_transfer_bin
      content_txt     = i_content_txt
      content_bin     = i_content_bin
      objhead         = i_objhead
      len             = v_len_in
    EXCEPTIONS
      err_conv_failed = 1
      OTHERS          = 2.
Then open dataset and transfer to ftp of the content of table content_bin(i_content_bin) as shown in above example.
I think this will be helpful for you

UPLOAD DATA FROM EXCEL FILE

hi guru,
I want to upload data from excel file for mm02.. first of all help on the matter of how to upload data from excel...
i hv used the FM ALSM_EXCEL_TO_INTERNAL_TABLE.. but its not working it uploading garbage value ... so tell me how to used it...
help me on this matter.

Check below example.
parameters : p_file LIKE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_file_name.
PERFORM get_file_to_excel.
*&      Form get_file_name
FORM get_file_name.
DATA: lv_name LIKE sy-repid.
lv_name = sy-repid..
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            program_name = lv_name
            dynpro_number = syst-dynnr
            static        = 'X'
       CHANGING
            file_name     = p_file.
ENDFORM. " get_file_name
*&      Form get_file_to_excel
FORM get_file_to_excel.
DATA: idata LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_file
            i_begin_col             = '1'
            i_begin_row             = '2' "Do not require headings
            i_end_col               = '2'
            i_end_row               = '60000'
       TABLES
            intern                  = idata
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    STOP.
ENDIF.
* Get first row retrieved
READ TABLE idata INDEX 1.
* Set first row retrieved to current row
DATA: gd_currentrow TYPE i.
gd_currentrow = idata-row.
LOOP AT idata.
*   Reset values for next row
    IF idata-row NE gd_currentrow.
      APPEND f. CLEAR f.
      gd_currentrow = idata-row.
    ENDIF.
    CASE idata-col.
      WHEN '0001'.
        f-belnr   = idata-value.
    ENDCASE.
ENDLOOP.
APPEND f. CLEAR f.

Upload data from excel file to mii without UDS and PCo

Hi Experts,
I am trying to upload data from excel file to mii db without using UDS and PCo. Is there any other ways that we can achieve it.
I am thinking one solution , writing stored procedure. any other solutions?
Thanks in advance,
Eswar.

Hi,
Thanks for reply.
I tried to create OLEDB data server which will point to my excel file in D drive.Its created successfully and i tried to query the datasource using sql query, I am not getting any modes in sql query template.
can u provide some steps..how to access this file.
Thanks, Eswar

Upload data from excel file to Oracle table

Dear All,
I have to upload data from excel file to Oracle table without using third party tools and without converting into CSV file.
Could you tell me please how can i do this using PLSQl or SQL Loader.
Thnaks in Advance..

Dear All,
I have to upload data from excel file to
Oracle table without using third party tools and
without converting into CSV file.
Could you tell me please how can i do this
using PLSQl or SQL Loader.
Thnaks in Advance..As billy mentioned using ODBC interface ,the same HS service which is a layer over using traditional ODBC to access non oracle database.Here is link you can hit and trial and come out here if you have any problem.
http://www.oracle-base.com/articles/9i/HSGenericConnectivity9i.php[pre]
Khurram

Read and write excel sheet data from uploded file in sharepoint site programmatically 2013

hi team,
I am working on sharepoint 2013.I want to read and write data in excel sheet (micrsoft excel) from stored file in shrepoint docoumnt library .please suggest me
vijay

Hi
Vijay,
check those links
http://www.sharepointwithattitude.com/archives/61
https://social.technet.microsoft.com/Forums/en-US/e760051b-a92f-473c-9ec9-0f0c36c99e40/read-and-write-excel-sheet-data-from-uploded-file-in-sharepoint-site-programmatically-2013?forum=sharepointdevelopment
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps.

Deleting the data from logical file/unix file

Hi all.
I need to delete the all the data from logical file (application server file/unix file).But I dont want to delete the logical file ( only data in the logical file should be deleted, i.e making file empty)
Thanks in advance.
Cheers.
sami

Hi Sami,
Refer thsi document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4d7aeb7d-0c01-0010-fa8a-a4a8e8968a93.
Regards,
Flavya

Delete data from a file

Hi,
I would like to know , how can I delete a line from a text_file,
and when it is deleted, I don�t want that there is a gap between
lines.
Could it be possible to use class RandomAccessFile to do it?
Please help me.
thanks.

You could do it with a BufferedReader. But there's no way to just magically delete the line. No matter what method you use, you'll have to:
1) Read all the data in the file up to but not including the line, then write it to the new file.
2) Skip the line you want to delete.
3) Read all of the data in the file starting after the line you want to delete going to the end of the file, then write that to the new file as well.
That's pretty general. Those steps could change if you, say, want the input and output file to be the same (in that case, you could just seek to the end of the line and move all the data after the line back to close the gap, then truncate the end of the file off), or if you are implementing stuff a bit different (for example, reading all the lines into a list, removing the lines from the list, and writing them back to a file).
Jason

How to delete data from a file using IO package

Hi All,
i am trying to remove some content of the file.
this content is not at starting of file not even at end of file.
can anybody tell me how can i delete number of lines from file using IO package.

iam having some data in text file .ex:in flowrist.txt
12/5/07,500,300,6000 like many set of datas are
there.In these if i want to delete the data based on
the date which i specified.How to do this specific
deletion?You need to open a stream to read in the file and then use the indexOf method provided in the Sting class to check if the line contains the date or whatever String you are looking for, if so then skip that line and store or re-write the lines you wish to keep, as well as some extra lines you may wish to add.
Take a look below at this example found on Google.
http://www.java-tips.org/java-se-tips/java.io/how-to-read-file-in-java.html
The above read a file line by line and prints it to console. You should be able to modify this, instead of using System.out to print the line you should use index of to check the lines for a date/String. Index of return -1 if the String you specify is not in the line you parse.

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

Just moved to Mac from Windows, so far biggest headache is the way folders are treated. I manage several very large websites and involve a lot of files within folders and I need the folders to show the date the last file inside it was changed?

In my FTP client I can click to sort by date modified which is fine if you are in a folder and then it shows the file dates correctly - but any folders within the root folder don't they seem to display randomly all together at the bottom of the list and it is a nightmare trying to find what folders have files in them that have been changed.
Is there any way to get the folder to register the last date of a file within it that was modified?

I dont know the answer yet, but i have noted what appears to be a bug in 10.9 in how it handles folder dates. Right now i am seeing folder modified dates changing randomly ot "today" - whatever date the parent folder was opened.
In the past my folders "modified" date was always the same as the last modified date of the items within. But this only moved down ONE level - if a subfolder's entries were updated the "gradfather" folder did not update.
But now severa people are reporting random, incorrect folder dates. I hoep this will be corrected soon, but who knows?
Grant

Data trasfer to file

Similar Messages

Maybe you are looking for