Data Triggering (and re-triggering)

Hello all,
I'd like to start off that I'm new to Labview, so I may not understand some basic concepts. I am using an NI cDAQ-9172 system with a NI 9215 card installed.
My experiment involves receiving two signals, one as a reference signal used as a time (trigger) reference, and the other the actual signal of interest. I wish to create a program that will allow me to monitor the reference signal until a specific condition is met (a minimum slope change, or a minimum % slope change - I am not sure what will be most robust at this point), after which the program will immediately begin saving a set number of data points of both signals to disk. After this, the program will continue to monitor the signal until the trigger is again found, and place this new data in a new column/row of the file. This process should continue until the user manually stops the program.
I was wondering if anybody could help me with solving this problem, or point to me a good example to work from. I've looked at many of the NI Examples with the keyword "trigger" or "triggering" in it, but have not found anything that seems to suit my needs. Additionally, I mentioned a few possible trigger options for my reference signal. A problem is that my trigger signal will have noise in it. Is it also possible to manually program trigger criteria?
If there needs to be any clarifications, please let me know.
Thank you.

Hi currentenglish,
I would say the first place you want to check out is the "find example" option under "help". LabVIEW contains a large library of shipping examples. They will give you a good understanding of how DAQmx works. The DAQmx examples are located in Hardware/Input and Output - DAQmx.
I've also included a few links below to give you some more information. I apologize if you've already seen some of them.
http://zone.ni.com/devzone/cda/tut/p/id/3216
http://zone.ni.com/devzone/cda/tut/p/id/11369
http://zone.ni.com/devzone/cda/tut/p/id/4329
I hope this helps.
Josh L.
Applications Engineer
National Instruments

Similar Messages

Creating controls and data triggers statically

Hi,
I have two questions wrt WPF:
1. I've set of controls like below:
<Grid >
<Border x:Name="DrawerOneBorder" Height="212" Width="227" Margin="1" BorderThickness="1"
BorderBrush="{StaticResource TileBorderBrush}" >
<TextBlock Style="{StaticResource TileTitleTextStyle}">Drawer1</TextBlock>
</Border>
<Image x:Name="DrawerOneImage" Height="50" Width="50" HorizontalAlignment="Center" VerticalAlignment="Center"
Source="..\Status\CheckMark.png" >
</Image>
<TextBlock x:Name="DrawerOneWarningText" Text="Drawer is open" HorizontalAlignment="Left" VerticalAlignment="Bottom"
Margin="15" FontSize="16" ></TextBlock>
<TextBlock x:Name="DrawerOneErrorText" Text="Error" HorizontalAlignment="Left" VerticalAlignment="Bottom"
Margin="15" FontSize="16" ></TextBlock>
</Grid>
The same set of controls I need to create multiple times. Is there a way where I can create a template kind and use it wherever required? (I should be able to change/give some information like text for each of the controls)
2. I've following code for data triggers:
<DataTrigger Binding="{Binding Path=ModuleDetails.Drawers[0].DrawerStatus }" Value="Ok">
<Setter TargetName="DrawerOneBorder" Property="Background" Value="#BDC2FF"/>
<Setter TargetName="DrawerOneImage" Property="Visibility" Value="Visible"/>
<Setter TargetName="DrawerOneWarningText" Property="Visibility" Value="Hidden"/>
<Setter TargetName="DrawerOneErrorText" Property="Visibility" Value="Hidden"/>
</DataTrigger>
Here, only drawer index changes and rest remains same. Is it possible to give common things in static resource and specific thing in each place?
Kindly waiting for your response.
Thanks,
Santosh

Please only ask ONE question per thread.
>>Is there a way where I can create a template kind and use it wherever required?
You can define an element as a resource at any level (application, window, user control etc.) and then reference it using a ContentControl like this:
<Window.Resources>
<SolidColorBrush x:Key="TileBorderBrush">Green</SolidColorBrush>
<Border x:Key="DrawerOneBorder" x:Shared="false" Height="212" Width="227" Margin="1" BorderThickness="1"
BorderBrush="{StaticResource TileBorderBrush}" >
<TextBlock>Drawer1</TextBlock>
</Border>
</Window.Resources>
<ContentControl Content="{StaticResource DrawerOneBorder}"/>
<ContentControl Content="{StaticResource DrawerOneBorder}"/>
<ContentControl Content="{StaticResource DrawerOneBorder}"/>
Remember to set the x:Shared attribute of the resource to false for a new instance of it to get created for each request to it. Note that you cannot modify any properties of the resource directly in XAML this way though.
If you require to be able to this you should use style resources:
<Window.Resources>
<SolidColorBrush x:Key="TileBorderBrush">Green</SolidColorBrush>
<Style TargetType="Border" x:Key="DrawerOneBorder">
<Setter Property="Height" Value="212"/>
<Setter Property="Width" Value="227"/>

</Style>
</Window.Resources>

<Border Style="{StaticResource DrawerOneBorder}" Height="400">
<TextBlock Style="{StaticResource SomeTextBlockStyle}">....</TextBlock>
</Border>
<Border Style="{StaticResource DrawerOneBorder}" />
>>Is it possible to give common things in static resource and specific thing in each place?
I am afraid I don't know if I understand this question but you cannot define the setters in one place and then somehow "import" these setters into the DataTrigger. This is not possible. But please start a new thread if you have a
new question.
Please also remember to mark helpful posts as answer to close your threads.

How to setup Datasource to use data triggers in Data Template

hi all,
Pls. let me know the process how to setup dataSourceRef that has to be mentioned in the data template tag for making use of various data triggers?
I have packaged function which will create a temporary table that I am using in my main query. This whole process should happen in the beforereport trigger.
can anyone help me in this regard.
Thanks in advance
Praneeth
null

Yes for triggers use need functions returning boolean value. These functions must reside in a package and you have to define package name as defaultPackage="package_name" in data template.

Could we have something like "Partial Data Triggers"

Partial triggers are very powerful and really make Ajax web development a peace of cake.
It seems however, that they come at a price - which is of course performance penalty.
For example, if I have a master table and detail richTextEditor, complete richTextEdtor HTML (which is not small) is sent over the wire on every partial refresh (or at least my tests indicate that).
Is there any chance we could get separation of data / presentation and have a property partialDataTriggers, which would only refresh the data and leave the presentation intact?
Edited by: Jernej Kase on Nov 4, 2010 11:33 PM

Frank Nimphius wrote:
Or are you talking about the Rich Text editor as a component which is getting refreshed and that you want to be stale on the page?I'm talking about this. It's not just RTE, it's also tables, forms... Why not keep the component definition (HTML) on the client without refreshing and simply deliver new data to the client. As far as I can tell something like this is already happening, only that currently both, the component and the data are refreshed.
A good example is af:table - it only loads data while fetching next range. This mechanism could be reused for "partial data refresh".
I know there are situations where you want to refresh both, but when you know you only need data, why not conserve a bit CPU power? HTML rendering is quite expensive.

Issues with Using Data Dashboard and Using Web Service

After running a system for many months it has suddenly decided to not work at all. I am using Data Dashboard to read variables on a host. I'll outline the system here to get a baseline:
I'm running LV 2012 SP1 f5.
I collect data from one Ethernet port and interfact it to another Ethernet port to form a proxy.
I use a fixed IP address from my DSL along with port forwarding/port triggering in my router for data observation and control.
So, what have I done so far?
1. Repaired my original LV 2012 SP1 and tested system.
2. Upgraded to LV 2012 SP1 f5 and tested system.
3. Ran service.msc and checked all the NI services that should be operational. Started and stopped several of them and rebooted computer.
4. Deployed all my SVs (multiple times)
5. Disconnected second Ethernet interface becasue sometimes the variables would deploy to this IP address.
6. Turned off my wireless because sometimes the variables would deploy to this IP address.
7. Checked "Web Server Configuration" "Application Web Server" for correct port number.
8. Checked "Web Services Management" and under "Deployed Web Services" there is one category: SV is marked as running. NOTE!! WebService is NOT listed and this could be a problem
I can use the following to retrieve data&colon; localhost:<port number>/sv/variable. But when I substitute my DSL IP number, I can no longer get any data.
So, what am I missing?
Thanks,
Paul.

Siana,
Thanks for your response.
I haven't touched the NI code in months. It is running on an XP laptop and I have the Windows updates turned off. McAfee is running on it and of course that updates regularily. This laptop is a dedicated machine that I only use for this function, nothing else. I haven't added or subtracted any programs for many months.
There have been no changes to the DSL from me. AT&T is constantly trying to get us to upgrade to U-Verse but we have resisted. All DSL modem and router hardware is the same.
Confusing, huh?

Spry Data Sets and IE8

Hi, I Currently have a glossary using the Spry Tabbed Panels with Spry Data Sets embedded in each tab. I had it working great in pre IE8.
Once we upgraded to IE8 it just wont load or display the data sets in the tabs. Below is the page code. (I used the JS straight from the Spry Framework no alterations, except in the CSS files). Any help would be great =).
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Glossary</title>

<script src="/composition/SpryAssets/xpath.js" type="text/javascript"></script>
<script src="/composition/composition002/profile_processes/SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<script src="/composition/SpryAssets/SpryData.js" type="text/javascript"></script>
<link href="/composition/composition002/profile_processes/SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
<link href="/composition/SpryAssets/SpryStackedContainers.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var ds1 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defnum", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds2 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defa", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds3 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defb", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds4 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defc", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds5 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defd", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds6 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defe", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds7 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/deff", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds8 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defg", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds9 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defh", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds10 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defi", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds11 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defj", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds12 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defk", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds13 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defl", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds14 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defm", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds15 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defn", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds16 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defo", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds17 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defp", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds18 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defq", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds19 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defr", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds20 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defs", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds21 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/deft", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds22 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defu", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds23 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defv", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds24 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defw", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds25 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defx", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds26 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defy", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
var ds27 = new Spry.Data.XMLDataSet("/composition/composition002/profile_processes/profile_glossary/glos sary.xml", "glossary/def/defz", {sortOnLoad: "word", sortOrderOnLoad: "ascending"});
</script>

<link href="../../../../composition/css/profile_sp1.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../../../../composition/css/print1.css" rel="stylesheet" type="text/css" media="print" />
</head>
<body>
<div id="top1">
<table width="100%" height="75px" border="0" cellpadding="3" cellspacing="0">
    <tr bgcolor="#000000">
      <th width="6%" height="36" align="left" valign="middle" scope="col"><img src="/composition/composition002/Profile_Processes/graphics/globe2.gif" alt="globe" width="70" height="68" border="0" /></th>
      <th width="94%" align="left" valign="top"><span class="whitebanner">Composition Learning Center</span><br />
                     <span class="whitebanner2"><strong>Learn. Grow. Succeed.</strong></span></th>
    </tr>
</table>
</div>
<div id="Layer4">
<h1 align="center">Glossary</h1>
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
    <li class="TabbedPanelsTab" style="display:none" tabindex="0"></li>
    <li class="TabbedPanelsTab" tabindex="0">A</li>
    <li class="TabbedPanelsTab" tabindex="0">B</li>
    <li class="TabbedPanelsTab" tabindex="0">C</li>
    <li class="TabbedPanelsTab" tabindex="0">D</li>
    <li class="TabbedPanelsTab" tabindex="0">E</li>
    <li class="TabbedPanelsTab" tabindex="0">F</li>
    <li class="TabbedPanelsTab" tabindex="0">G</li>
    <li class="TabbedPanelsTab" tabindex="0">H</li>
    <li class="TabbedPanelsTab" tabindex="0">I</li>
    <li class="TabbedPanelsTab" tabindex="0">J</li>
    <li class="TabbedPanelsTab" tabindex="0">K</li>
    <li class="TabbedPanelsTab" tabindex="0">L</li>
    <li class="TabbedPanelsTab" tabindex="0">M</li>
    <li class="TabbedPanelsTab" tabindex="0">N</li>
    <li class="TabbedPanelsTab" tabindex="0">O</li>
    <li class="TabbedPanelsTab" tabindex="0">P</li>
    <li class="TabbedPanelsTab" tabindex="0">Q</li>
    <li class="TabbedPanelsTab" tabindex="0">R</li>
    <li class="TabbedPanelsTab" tabindex="0">S</li>
    <li class="TabbedPanelsTab" tabindex="0">T</li>
    <li class="TabbedPanelsTab" tabindex="0">U</li>
    <li class="TabbedPanelsTab" tabindex="0">V</li>
    <li class="TabbedPanelsTab" tabindex="0">W</li>
    <li class="TabbedPanelsTab" tabindex="0">X</li>
    <li class="TabbedPanelsTab" tabindex="0">Y</li>
    <li class="TabbedPanelsTab" tabindex="0">Z</li>
    <li class="TabbedPanelsTab" tabindex="0">0 to 9</li>
</ul>
<div class="TabbedPanelsContentGroup">
    <div class="TabbedPanelsContent">
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds2" class="StackedContainers">
        <div spry:repeat="ds2" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds3" class="StackedContainers">
        <div spry:repeat="ds3" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds4" class="StackedContainers">
        <div spry:repeat="ds4" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds5" class="StackedContainers">
        <div spry:repeat="ds5" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds6" class="StackedContainers">
        <div spry:repeat="ds6" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds7" class="StackedContainers">
        <div spry:repeat="ds7" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds8" class="StackedContainers">
        <div spry:repeat="ds8" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds9" class="StackedContainers">
        <div spry:repeat="ds9" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds10" class="StackedContainers">
        <div spry:repeat="ds10" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds11" class="StackedContainers">
        <div spry:repeat="ds11" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds12" class="StackedContainers">
        <div spry:repeat="ds12" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds13" class="StackedContainers">
        <div spry:repeat="ds13" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds14" class="StackedContainers">
        <div spry:repeat="ds14" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds15" class="StackedContainers">
        <div spry:repeat="ds15" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds16" class="StackedContainers">
        <div spry:repeat="ds16" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds17" class="StackedContainers">
        <div spry:repeat="ds17" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds18" class="StackedContainers">
        <div spry:repeat="ds18" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds19" class="StackedContainers">
        <div spry:repeat="ds19" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds20" class="StackedContainers">
        <div spry:repeat="ds20" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds21" class="StackedContainers">
        <div spry:repeat="ds21" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds22" class="StackedContainers">
        <div spry:repeat="ds22" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds23" class="StackedContainers">
        <div spry:repeat="ds23" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds24" class="StackedContainers">
        <div spry:repeat="ds24" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds25" class="StackedContainers">
        <div spry:repeat="ds25" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds26" class="StackedContainers">
        <div spry:repeat="ds26" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
      <div spry:region="ds27" class="StackedContainers">
        <div spry:repeat="ds27" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
    <div class="TabbedPanelsContent">
    <div spry:region="ds1" class="StackedContainers">
        <div spry:repeat="ds1" class="RowContainer"> <div id="w1d" class="RowColumn">{word}</div>
          <span class="RowColumn">{definition}</span>
        </div>
      </div>
    </div>
</div>
</div>
<script type="text/javascript">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab:0});
</script>
</div>
</body>
</html>

Thanks Gramps.
I totally forgot about the Xpath filtering.
Trusty Hammer
altruistic gramps <[email protected]>
01/11/2011 05:06 PM
Please respond to
[email protected]
To
patrick dennis <[email protected]>
cc
Subject
Spry Data Sets and IE8
A quick fix: add the following to your document
A better fix: reduce the number of datasets to just one and use Xpath
filtering triggered by an onclick event, as in clicking the relevant tab.
Gramps
For a more specific answer, please supply a link to your site.

Data replication and synchronization in Oracle 10g XE.

We are trying to do data replication and synchronization sort of thing for all our servers. We are using Oracle 10g. XE. I guess there are some features in oracle already for replication but I am not very sure about them.
To explain it more clearly - we will have individual database servers in our sub-divisions and then divisions and centers and then main server. We need to synchronize at various levels. So If any body is aware of any techniques, please let me know.

Hi,
Could you tell me what exactly synchronisation your talking about..?
we will have individual database servers in our sub-divisions and then divisions >>and centers and then main serverIf you have mulitple DB servers then you can connect it by DB links. also if you are talking DB synchronisation then you can have Triggers,Materialized views.
we also have two independent severs which are synchronised(atleast schema levels).
Regards!

HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I have data caps and need to do a clean mavericks install

Hello.
I recently bought a used Mac mini and not realizing the new Mac OS installation options are over the internet, I erased the hard drive and tried to do the system recovery.
Unfortunately I'm on rural broadband, I have a small data cap and my connection is unreliable. Even if I try to just do it anyway and eat the overage charges I only get corrupt downloads that won't work. Tried downloading the installer from the local library's free wifi and made a USB stick but it still insists on re-downloading when I try to install.
Is there any way to do it offline using a copy of the OS downloaded somewhere else? My research says no, Apple if you're listening please please provide that option. This really ***** :(
If I go to an apple store will they charge me a lot to do it? Would they let me plug in a monitor and keyboard/mouse and let me do it myself for free?

The_Cowman wrote:
Hello.
I recently bought a used Mac mini and not realizing the new Mac OS installation options are over the internet, I erased the hard drive and tried to do the system recovery.
Unfortunately I'm on rural broadband, I have a small data cap and my connection is unreliable. Even if I try to just do it anyway and eat the overage charges I only get corrupt downloads that won't work. Tried downloading the installer from the local library's free wifi and made a USB stick but it still insists on re-downloading when I try to install.
Is there any way to do it offline using a copy of the OS downloaded somewhere else? My research says no, Apple if you're listening please please provide that option. This really ***** :(
If I go to an apple store will they charge me a lot to do it? Would they let me plug in a monitor and keyboard/mouse and let me do it myself for free?
Most Apple Stores are pretty good. Or a friend with a large download limit. Just make sure that where ever you go to download it that you use your OWN Apple ID. Then copy it to the USB Stick, copy it to your Application folder and reinstall. (Note that the installer removes itself after installation, so keep that copy either on the USB stick or copy to an external drive, etc.)
Pete

Get cell value in Planning Data form and using it in a business rule

Hi Everybody,
if i set the data type of an Account Member as text, is there a way to get the value inserted by the user in a dataform, turning it as dimensional member and using it in a business rule?
So, if the user insert the value "USA" in a cell, can i use any functions to tell essbase that "USA" is a dimensional member and then using it in a business rule, for example in a cross-dimension like Period1->FY12->USA?
I tried to use the function @Member and it doesn't work, but i'm wondering if there is a way that can let me get the value inserted and use it just like a dimensional member. What are the ways that can let user input value that can be used in a business rule? I think one is by using SmartList, is there any other ways? Maybe using variables?? As an alternative i tried to use Prompt Variable but there are too many members on which the rule must run.
Please help me, i wanna know if i can or not let the user input the member on which the rule must run...
Thank all guys
Bye
Maurizio

Thanks EW for your answer,
YesI could use SmartList even if i think it's very tough to handle. My experience on using SmartList in caclc script is not so good. I try to enter in details of my requirement:
I have 500 account members.
For each one, I have to calculate the monthly budget by sharing the amount among the months. The user wants to calculate it on the basis of the actual flow(over the months) of an unspecified account of the prior year. The unspecified account must be inserted in a data form.
So, i could use a Smart List but it colud be of 500 elements and then i should make a rule with as many IF as how many are the accounts. Or im wrong? The only way to use smart list dynamically in a business rule is by referring its values in a IF condition. Or i'm wrong.
I tried to use execution variable ma it seems don't work. In this case the user must pay attention to write the account correctly, otherwise as you say the rule doesn't work.
The value in PD0A020 is "PD0A000" (that is a dimensional member). The value in PD0A000 is "hello". In PD0A040 the rule returns "PD0A000" and not "hello" as i would. The function @Member appears to be not able to catch the dimensional member by the value in PD0A000.
{Example}="test"->"Input"->"Scenario_test"->"FY12"->"PD0A020";
Fix("test1","Input","Scenario_test","FY12")
"PD0A040"=@Member({Example});
endfix
So, my doubt is: is it possible for Essbase/Planning to use the value inserted in a data form and to turn it in a dimensional member? What are the practicable ways to let the user input/choose the member on which makes the rule run?
Thank you Ew, thank you guys
Maurizio

Data Federator data lineage and impact analysis

Hi,
I am looking for the use of data lineage and impact analysis feature in data federator at Universe level.
Can I know which objects are using which fields by uisng impact feature in the data federator.
Thanks in Advance.

I realize this answer is a cop out but I'll suggest it anyway. Upgrade.
I struggled with getting the lineage and impact analysis working in 10.1 and had to do quite a bit of trial and error in the Apache configuration files, DAD's ,etc. because the lineage reports were web based. I never got them working in Production due to other much more pressing implementation issues at the time and never went back to fix them.
In 10.2 and above the reports are much easier to get with no real configuration needed.
Anyway, back to your question, I would suggest going back through the 10.1 documentation on getting those to work and have someone a bit familiar with setting up Apache help you. I did get them working in our Test environment but its been so long I can't recall all the steps and tricks, sorry.
-gary

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

Diff b/w Data warehouse and Business Warehouse

Hi all,
what is the Diff b/w Data warehouse and Business Warehouse?

hi..
The diferrence between Datawarehousing and Business Warehouse are as follows.
DataWarehousing is the concept and BIW is a tool that uses this concept in Business applicaitons.
DataWarehousing allows you to analyze tons of data (millions and millions of records of data) in a convinent and optimum way, it is called BIW when applied to Business applications like analyzing the sales of a company.
Advantages- Consedering the volume of business data, BIW allows you to make decisions faster, I mean you can analyze data faster. Support for multiple languges easy to use and so on.
Refer this
Re: WHAT IS THE DIFFERENCE BETWEEN BIW & DATAWAREHOUSING
hope it helps...

Data fileds and key fields in DSO

Can any one explain what exactly difference between data fileds and keyfields in DSO or the concept of these two
And how to know which fields should be assigned to data filed or key field
with regards,
musai

Hi Musai,
Let me take an ex. Say you have 3 fields A, B & C. Let us assume 'A' is keyfield, 'B' & 'C' are Datafields.
Lets assume the PSA data is :
A             B              C
001      Musai        89.9
002      Musai        89.9
003      Pavan       75.00
So when you load the data to DSO, since all the keyfield values are unique (001,002,003), all the records will get loaded to DSO.
But If PSA data is :
A             B              C
001      Musai        89.9
001      Musai        85.7
003      Pavan       75.00
Only 2nd & 3rd rows will be loaded to DSO since 1st & 2nd row have same value for keyfield (001). So 1st row gets overwritten(or summation depending on what is the setting in Transformation rule for C considering C is Keyfigure) by 2nd when you load to DSO. 3rd row doesn't have any problem. So that will go as it is.
Also please note that we cannot use Keyfigures as keyfield.
Hope it is clear now!
Regards,
Pavan

Create two or more data sources and mapping to DSO

Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!

Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense?

Data fields and key fields

Hi,
Data fields and key fields are same as Characteristcs and key figures? Or they are diffrerent?
Thanks,
Radha

HI
Key Fields = Acts as Primary Key for The ODS like Primary of Tables in R3.
Data fields = Apart from Key fields We consider rest as data fields.
Ususally we use Characteristic info Objects and Dates in Key Fields and Key figures in Data fields.
It's decisive factor for overwriting property of ODS or DOS.
Hope this helps.
Regards,
Rangzz
Edited by: Ranganath Kodiugane on Feb 7, 2009 12:14 PM

Data Triggering (and re-triggering)

Similar Messages

Maybe you are looking for