Data Update from ODS to Data Target

To update data from ODS to Infocube, I right clicked on ODS and selected update data in targets and then scheduled it. But in the monitor I am getting an error and status remains yellow. The error is:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Receiver of IDoc is its own logical system
How do I remove this error?

Hi
The note contains a setting that you need to make in case of Data mart too.
"If you download data via the MySelf connection, you must check the
ROIDOCPRMS table in the BW system."

Similar Messages

Problem with update from ODS to Cube

Hi All,
I had an issue, when i was loading from ODS to Cube everything was fine except one data package failed coz of some object locked( User : myself, though i wasn't running anything else except this), but i check in SM12 no locks exist for that particular time.
apparently the load failed coz of this single package, its a load from ODS to Cube, so no chance of Manual update from PSA.
any suggestion: do i have to repeat that load all over again( sucks !!! it is for 40 mil)
Regards,
Robyn.

Hi Hoggard
Check the Job log fro ur Job in the SM37 and check for that Datapackage is there any thing failed liek
"ARFCSTATE-SYSFAIL" if this is there .. it means its an Deadlock .. please check the ST22 dump...
U can use the PSA...
1) go to the 8ODS infosource and copy the Delta IP
2) check the option in the processsing as Update PSA and the subsequently into the data targets
3) Schedule the IP manually
hope it helps
regards
AK

Further update from ODS to IO attr

Hi All,
I have getting a weird error when doing a full load to mmy info object attr(master data load )+ text sa s well from ODS..
its giving...data for that info object already deleted...I am running a full load...ne idea why it is happening..
thanks in advnace...

Hi Tina!
Could you please tell us the exact class/number of the error message ?
Bye,
Roberto

Error in Data updation From ODS TO CUBE

hello Experts
We are working on BW 3.5
for FI GL line items we are loading the data to ODS and than to Cube.
earlier there was a process chain failure 2 months back so delta were stuck for 2 months now about 10 million records have been uploaded in ODS but when i am tryint to upload these records to CUBE via delta upload its giving Error
Value 'Ã
Â ABC100711396 ' (hex. 'C30DC2A04C4344313030373131333936 ') of characteristic 0REF_DOC_NO c
i would like to know how to correct this and from where this error is coming as the same data is loaded to ODS and there its OK and secondly as there is no PSA bw ODS and Cube Do i need to delete the request and upload again
what if same error appears again should i write a start routine in update rule Between ODS and CUBE for special characters
thanks for replies

Hi,
Goto All Elementary Tests in RSRV
Goto Master data
Select the required test
Select your Infoobject
Execute the test
You will get the result with errors or no errors
If you get errors, then you click "Correct Error" button.
Regrds,
Suman

Update data from ODS to ODS with infopackage selection

Hi,
I am trying to update data from one ODS to another ODS with selection criteria in InfoPackage which is created manually.For Full load I can give selection criteria in InfoPackage. When I initialize data Selection is greyed out even selections for Full load exists. Please advise me how to give selections for delta loads from ODS to ODS loads.
Thanks in advance.
Ram

Once you started an ODS as destination in FULL mode from a DS you cannot get back.
So if you want to update from ODS to ODS using Change Log but considering only some data records you could create an Update Routine with a Start Routine that DELETES undesired records (e.g. DELETE DATA_PACKAGE WHERE ...) and then start an Init-Delta Loading.
Hope it helps
GFV

Data tranfer from ods to infocube

Hi Friends,
I have created ODS and infocube, the data was loaded on ods sucessfully , but when tried to transfer the data from ods to infocube, the error comes. the update rules and data flows are shown correctly as in FUFU book.
the errors comes as check the load and after that the infopackage ask to delete the init request in same cube.
can anyone suggest the right way of tranferring the data from ODS to INFOCUBE and the issues to check.
Kind Regards,
Irfankhan

Hi
Recheck whether you have the request Activate data in ods (odsrcactivate data & Activate Data automatically while ods creation & odsmanageRequest tab -- request -- Activate)
If the Data is there in Active Data table then try to update the same with Update Rules.
While Info Package from ods--Cube -- the Info Package Selection should be Delta ( Init is already there in your cube as I have seen the error message you mentioned)
the update From ods to Cube
Via Info Package -- Data Target Tab -- Schedule it with options Delta --
Info Package -- Monitor -- Update Manually (Wheel)
Adding it in Process chain
Hope it helps and clear

Data loads from ODS TO CUBE

Hi,
   i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
sp

Hi Srinivas,
        check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
         Do a Init load and then do the delta load.
hope this will help.

Data Flow from ODS to Cube

Hi Guys,
Need a clarification!!! Iam running a full update from an ODs to a Cube. Will the data be picked up from ODs Active Table or Change Log Table.??
Thanks
Srinivas

hi,
You should do further update from ODS ONLY after "Activate data in ODS"
This means, the data will be picked from Active table of ODS.
assign points if useful ***
Thanks,
Raj

Loadin Master data Attribute from ODS

Hi experts,
I have a Master data as Infoprovider:
CASE with attributes at1 and at2.
I loading master data.
Another infoArea, I have and ODS ( case, field1, field2) that is loading with DELTA.
After loading the delta, I want to update the AT2 from CASE master data.
Which is the best option to loading an attribute from ODS? FULL? DELTA? What happend if the duplicate key error appears??
I believe that with a DELTA Update from ODS to CASE will not be an error.
thanks a lot!

Hi,
I dont think so there sould be problem in further update from ODS to Attribute.
It would be better to keep the Delta in Further update.
Regards,
Sharayu

Reg Delta from ODS to Cube

Hello , experts.
I am doing delta Load from ODS1 to Cube1, delta got failed. and in the ODS we have data. i want to reload it or i want to do repeat delta .
Problem is in the ODS its Marked that request as updated to data targets. in this case how should i proceed to repeat delta. i need steps to do this.
Thanks
Sharp

Hi Sharp,
try to remove the mark (via ODS - manage - remove the 'mark' and update the data from ODS to the target cube again (ODS - right mouse click - check delta update option).
Hope it helps.
Li

Load from ODS to Infoobject

How do we load data from ODs to infoobject??

Hi,
In RSA1 (Modelling) , when you right click under your infoarea you can see the option "Insert characteristic as a data target".. Choose ur characteristic which you u want to update from ODS..
Right click on the ods - Generate export data source , now you will find the infosource with 8ODS.. Create a update rule for that characteristics by giving ODS name..
Now you can create infopackage and schedule the data from ODS to infoobject.
Hope it helps.
Regards,
Siva.

Delta load problem from ODS

Hello everyone here.........,
I have a problem loading frm ODS to another target with delta.
Actually to ODS i am loading from two datasources. Both are full loads. Full1 and Full2. When i am trying to load from ODS to another target with delta..., it takes only Full1 data not Full2. So for loading Full2 now i am loading manually.
so why this happend here. Please let me know how to do
for making full2 also automatically........,
swetha

yes u r correct. after full1 loaded into ODS, its activating the ODS. these two can done through process chain. For full2 load we are loading manually. and doing manual activation.
lets take small example here that for yesterdays full1 & activation has done successfully. and after that i am loading
full2 manually & activated. and again today process chain ran, it loads full1 & activated ODS. Now what i am thinking is does this further datamart load which is run in process chain picks only full1 load and it doesn't pick full2 load which is already loaded & activated successfully.
I think u will get what i suppose to ask you now...,
clear my confusion here please......
swetha

Update data targets from ODS object automatically

Hello experts,
I have an ods (that has two delta loading every night) with the setting: "Update data targets from ODS object automatically". This ODS is source of only one other ODS.
But we have a chain when there are the seguent steps: delta 1 --> ODS1,
delta 2 --> ODS1; Activate ODS1; delta --> ODS2; Activate ODS2.
The setting "Update data targets...automatically" could create some problems?
I think this because it is happened that in delta loading of ODS2, some records have only the key filled, and all the data fields blank; then, if I make a full repair of these records, all data are correctly filled.
Could be this the cause?
Help me..it is urgent..
Thanks,
Vito

Hi Vito,
To have better control of processes when ods gets data from multiple sources and supply it forward to ODS and cube ...we generally deactivate the flag "update data automatically".
And Process chains looks like ..
From source 1,2,3 update data into ODS 1.
Activate Data ODS1
Initiate delta from ODS1 to ODS2.
Activate data ODS2.
We did face some problem of blank records with only key filled and later deactivated the checbox "Update data into data targets automatically" and it resovled lots of issues.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Update data targets from ODS

Hi Friends,
I have question regarding how to update data further from ODS.
I have ODS1 and ODS2.
ODS1 is having deltas updated from ODSA.
ODS2 is a new ODS and now needs to be updated from ODSA.
I have reviewed the help already.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/749bbb595511d4b2bc0050da4c74dc/content.htm
I want to initially update the ODS2 with <u>selection conditions</u> from ODSA.
After that I want to load delta from ODSA to ODS2 by automating the process in process chain.
Please help me know, What is the optimum solution and what are the steps need to be executed.
Thanks,
John.

Anil,
I am just repeating the procedure to cinfirm that I understand it properly.
1. Go to scheduler, Initialization option make the status of the overall request red.
2. when it asks for update the QM status to all data targets, select no.
3.and then delete the init. request from Scheduler.
By doing this we just deleting the initialization selection and the request in the subsequent data targets are still green and they contain data.
After that Init. without data transfer will do the work.
Please confirm,
I really appreciate your input on this.
Thanks.

Runtime error in updating initialization data from ODS in to an Infocube

Hi experts,
i have uploaded the init request in to an ODS.Now when i am trying to update this init request by selecting <b>Update ODS Data in to data target</b> fron the context menu of ODS I am getting Short dump saying:
MESSAGE_TYPE_X" C
SAPLRSSM" or "LRSSMU36"
RSSM_OLTPSOURCE_SELECTIONS.
furthermore as i am udating data from an ODS to infocube, would the esource system be my BW system it self.
Please help me ASAP.
Thanks in advance.
Jitendra Joshi

hi Jagdeesh,
thanks for your help.it has probably solved the problem i was previously facing but now when i am trying to schedule the update , it is getting faild along with following error message:
The InfoSource 80FIGL_O02 specified in the data request, is not defined in the source system.
the system suggest following solution :
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .
I tried it by replicating datasource but it has not solved the problem.
Please Help ASAP.
i have assigned point to for the solution you gave...........
Thanks in advance
Jitendra Joshi

Data Update from ODS to Data Target

Similar Messages

Maybe you are looking for