Data Upload Using CATT for transaction CT04

Hi,
I am doing a data upload for the transaction ct04.I have uploaded the characteristics and characteristics value and description.Now i need to add the documentation for each and every characteristics values.
I created a recording using CATT and when i try to execute it ,the editor screen does not get displayed when i execute in foreground mode and it goes for a short dump.
Any help in this regard is highly appreciated.
Thanks and regards,
Venkatalakshmi

Hi,
Got this material from a group
check it out
http://www.sapsuperusers.com/ABAPKC/TESTINGTOOLS/ECATT.pdf
Thanks & Regards,
Judith.

Similar Messages

How to revert the data that is loaded using BDC for transaction PA30

Hi All,
We had loaded the data in SAP using BDC-Session Unfortunately.
Now we want to delete all the data which is loaded usong these sessions.
Please can anyone know the procedure to do so.(May be using LSMW)
This is the test environment.
This is the HR Data.
Transaction we used is PA30.
Thank you,
Edited by: Kumar B on Sep 16, 2009 6:55 PM

Sorry All for the late response.
Thanks Swathi ..I thought in same manner.
But we used the LSMW,It deleted the records in the exact fashion we need.
It was a nice experience.
Use T-code SE38 run the report RPUDELPN and pass the pernr entire data will delete. as it is a test client then go to NUMKR Feature reset it and upload the correct data again.
I think that would not have worked for us as it deletes all the employee records.
Might be dangerous too
If it is has standard fast entry screen then use pa70 for mass deletion
Apart from deletion,Also we need to delimit the previous record.
Thank you All

Reg Vendor master upload using BDC Call Transaction Method

Hi All,
Thanks in advance.
I am uploading vendor master data using bdc call transaction method for XK01. In that i am getting an error message that the fields " smtp_addr" ( for email) and "time_zone" (for time zone) doesnot exist on the screen '0110' ( this is the second screen) . the field timezone will be displayed on the screen only when we go for communications button and select the URL field .
Do anybody have the solution for this problem. if possible can you give me the code for that screen.

Create a recording via SM35 (menu go to=>recording), this will generate automatically the code for filling your bdcdata-table...

Cost center data uploading issue in OKENN transaction

Hi Gurus,
I have uploaded cost center data using LSMW IDOC method. the data uploaded in the CSKS table successfully. after that i have checked for the cost centers in OKENN transaction at standard hierarchy level. but there cost center are not exist under hierarchy level. then i have changed the hierarchy data(KHINR)(for example From SUS2021100 to SUS2021200, ihave changed in KS02.... then the cost displyed under SUS2021200.... again i have changed the hierarchy from SUS2021200 to SUS2021100.... then the cost center displyed under SUS2021100..... But actualy when i have loaded the data using LSMW all the loaded.... but the cost center not displyed under hierarchy.... after manualy chnged the hierarchy data at KS02 transaction.... it is displying.... idon't understand what is the problem.... can anybody solve my issue.... thanks in advance

Hi Gurus,
I am facing the same issue while uploading cost centers through COSMAS01 basic type.
Cost centers are created properly, we can display them with KS02. Every data are loaded correctly, even the standard hierarchy. Into table CSKS, field KHINR for standard hierarchy is populated, nevertheless, we do not find the cost center into the OKEON Tcode.
How could I solve the issue I am facing ?
Thx for your help.
Regards,
Aurelien

Data Upload using TDMS

Hi,
We are using TDMS for transferring the data and for scrambling as well and we need to explore if TDMS can be used for Data upload from SAP to SAP. If yes, how this can be acheived using which TDMS functionality.
Also, how can TDMS be integrated with SAP BODS tool?
Thanks and best regards,

Hello Amr,
TDMS can't be used for data upload.
Thanks
Anita

Regarding Bank stmt upload using mt940 format transaction ff_5

Hi Experts,
Please help me in the mt940 upload using transaction ff_5.
i am getting all the items except cheque number.
please help me how i can get the cheque number in the output of the report.
where the cheque number i should pass in mt940 formt.

Hi ,
Check SAPnote 13283. This has information on
Multicash
SWIFT MT940
DTAUS
BAZ
MAOBE
SAP.TXT and SAPKURZ.TXT
Also you can see the link http://www.swedbank.lv/lib/en/SWIFT_MT_940_formata_apraksts_ENG.doc
for the detailed description of SWIFT MT940 File.
Hope it helps
SJ

Tables used in MM Master Data Upload using LSMW or BDC?

Hi,
Can anyone provide me with the following information about uploading MM Master Data using LSMW or BDC :-
1. What and all tables are used for uploading Material Master, Vendor Master, Info Record, Open PO, Open PR, RFQ, Open Contracts/Agreements ?
2. What problems are faced during Data Upload ?
3. What error appears/encouontered during upload ?
4. What is the diffrence b/w LSMW and BDC ? Both can be used for Data upload so, what differences are b/w them ?
5. Any other thing to remember/know during Data Upload ?
Thanks,
Lucky

Hi Lucky,
Dont get angry by seeing my response.
See each and every question posted by u is available , in this forum,
u need to do just a search on individual post.
see what ever ur posted, u r definetly got the solutions through others,
remember most of these answers are fetching by this threads itself (60-70%)
a few solutions are there that are given by own,
so better to search first, in the forum , if not satisfied with the solutions then .........
Just its an friendly talk
and Reward points for helpful answers
Thanks
Naveen khan

How to use SUBMIT for transaction program?

Hello,
Please help me with following requirement.
I need to pass selection screen values from ZReport to transaction F.01 and collect displayed data output in internal table in ZReport and use internal table for further processing.
Please let me know,
1) How to use SUBMIT with transaction code or modulepool program (<b>remember I don't want to submit report program</b>)?
2) How to collect F.01 output data and bring back to Zreport ?
Thanks in advance.

Hi ab,
1. How to collect F.01 output data and bring back to Zreport
The data (of output) can be collected,
for display purpose.
We cannot get the full data, which makes sense.
2. The data shall be collected, in a printable format only,
ie. with vertical lines, horizontal lines (if any) etc.
regards,
amit m.

ISU Business Partner Master data Upload using BAPI?

Hi Experts,
I used BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to upload ISU Business Partner master data.
This BPAI is not uploading the following topics:
1. Communication Address like Telephone,extension, email and etc., are not uploading.
2. Middle name, nick name etc, the field which are under the Expand symbol not uploading.
3. Reference customer also not uploading.
strctures what I used are:
for communication : TELEFONDATANONADDRESS, E_MAILDATANONADDRESS
general data : BAPIISUBPD
Reference customer: BAPIBPPARA-MUSTER_KUN
I am passing all the data but not uploading some of the field values (above) using that BAPI.
Could you please let me know the solution?
Please help me out!
Thanks in advance.
sekhar

Sekhar:
Try with below details:
for communication : BAPIISUBPA & BAPIISUBPAX.
general data : BAPIISUBPD & BAPIISUBPDX
Reference customer: BAPIISUBPA-BP_EXT & BAPIISUBPDX-BP_EXT
Thanks,
Murali.

Issue in Data transfers using ALE for E-Recruiting standalone system

Dear Experts,
We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5.
When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Quality servers this is not working fine.
we have created iDocs using the following filters.
For Object P: Infotypes 0000, 0001, 0002, 0003, 0006, 0024, 0105.
For Objects O,S: 1032, Subtype: 0010
For Object: 1001, Subtype: A003, A008, A012, B007
For Object O: 1001, Subtype: A002, B002, B003, B012, Tyoe of related object: O,S
For Objects: C, O, S, Subtype: 1000, 1002, 1028
For Object:C, Subtype: 1001, Subtype: A007
When we do the data transfers in Sandbox using PFAL it is transferring the data properly.
But when we do the same iin Dev and Quality servers we are not able to do it and gettign 52, 51 errors.
Here we are facing a strange issue. For some Users when we transfer data it is transferring data but with 52 error messgae.
For some users I am getting 51 error where i could not transfer any data.
For some users, when we tranfer O, S, and P related data is moving but getting mostly 52 error and all the relationships are not moving here for O,S and properly. But P related CP, BP and NA are getting created successfully.
It is happening only in Dev and Quality server and that too some users are able to get transferred but not all.
Where will be the issue? How can we resolve this?
Any help will be appreciable.
Thank you in advance.

Hi Sekhar,
Have a look over these threads.
Errors in ALE data transfer to E-Recruiting.
http://scn.sap.com/thread/1535402
BR,
RAM.

Posting More than 900 lines not allowing uploading using BDC for FB60

Hi,
When i am upload vendor invoices with More than 900 lineitems using BDC program it is giving the fallowing error .
1 You are entering line item 900 , a maximum of 999 line items are defined
As per i know it will allow 999 line items for one document posting . But i am getting error when i am posting more than 900.
If any body know the solution please share with me .
Thanks
SriHari

I vaguely remember that SAP reserves lines for automatically created items e.g. for taxes, you might have run into that limit. Check in that direction with a functional expert, the limit might be configurable.
Thomas
Edit: now I did what you could have done and checked the where-used-list for message F5 138, the 900 is hard coded, and it is just a warning, seemingly to alert the user of the brick wall he is about to hit very soon.

Queries with date functions using PreparedStatement for multiple DB

I am developing application that uses DB independant queries. I am using preparedstatement to process the queries. I need to use date functions for query selection criteria.
for eg.
selecting the list of employees who had joined in the last 15 days
selecting list of employees who had joined between two dates etc.
where Date Joined field is a Timestamp value. To extract date no DB specific function can be used.
If I use setMonth, setYear etc.. to set params in the pstmt the query becomes complex in the above case. Can any one throw some light on how to do the above in preparedstatement or any other better alternative.
Tx a lot

Hi,
I did not mean that way. I presume that there is a timestamp value (may be a date too) column in the table. Then based upon your requirement (say before 15 days) pass the value as date (or time stamp) in the query as a parameter.
String qry = "select * from myTable where join_date <= ?";
stmt.setDate(1,myDate); // this is where you will have to manipulate the value to suit your DB timestamp or date value; you will have compatibility issues with util.Date and sql.Date so use Calendar class to satisfy.Feel free to mail me if you need further clarifications to [email protected]
Cheers,
Sekar

Data Upload Using BDC

Hi Friends,
While creating the task list user defined field is in input mode, but when i do data uploading thru BDC program it's always coming in display mode, so system is not taking the data input for that field.
Field Name : User Defined Field ( PLPOD-USR00 )
Kindly suggest the solution.
Regards
Pankaj

Hi ~
1. Are you trying bothn online and BDC with the same user id? Please check that if there is any authorization issue.
2. Some times in BDC the screen flow is different. Check whether there is any difference in the sequence of the screens in between the BDC and online for creating task list.

Master data Uploading using QTP

Can any one explain detail about QTP master data uploading.If possible send me the materials abt QTP uploding.

Hi
You won't get ready made template.
You have to prepare the layout according to your requirements.
First check it with the business requirements, and make note of the details and find the relevant fields in the relevant tables of the master data.
Prepare the layout as below:
Say your doing for the Chart of accounts load - Table is SKA1 - take the important fields technical name, character type and length of the field. Enter the data and save it in the desired format.
VVR

Addition of config keys for transaction CT04

For transaction code CT04 for a material for which i have output types ZCRE and ZCHG
under variant config we have configuration value and configuration description. i would
like to add additional config keys like configuration key part3 and configuration key part 4
configuration key part5 and configuration key part6 to the existing
configuration key part 1 and configuration key part2.
How can i create additional configuration keys and how do i group them.

Hi!
CT04 is for maintaining characteristics. What configuration keys are you talking about exactly?
Any relevant transactions can be found at the following SAP menu path:
Logistics - Central functions - Classification
Regards
Tamá

Data Upload Using CATT for transaction CT04

Similar Messages

Maybe you are looking for