Data usage analysis page. Doesn't match current usage page?

O.K. Here's what I'm going through.
Verizon tells me I'm way over my 5.0 limit. Right now I am close to 9GB.
So to check I click on usage, This is what I get.
Data Allowance Exceeded. Additional data usage will be billed at $10 per 1.000 GB. Current Overage = 3.950 GB
4.0 overages x $10 = $40.00 in overage fees. You may be able to avoid data overage charges by increasing your data allowance before 11/25/12 and requesting the change be backdated to the beginning of the current bill cycle.      5 GB of 5 GB   
+3   1.0  GB Overage Allowance    3.000 GB  / 3.0 GB    
  Data Usage can be measured in kilobytes, megabytes and gigabytes.
  Data Usage Equivalent
1,024 Kilobytes (KB) = 1 Megabyte (MB)  1,024 Megabytes (MB) = 1 Gigabyte (GB)    
    +1   1.0  GB Overage Allowance    0.950 GB  / 1.0 GB    
   Data Usage can be measured in kilobytes, megabytes and gigabytes.
  My Usage:8.950, 9,164.800,   9,384,755.200
  Total Usage: 8.950,  9,164.800,  9,384,755.200
Next I click View Data Details.
I get 160 lines of mumbo jumbo. So then I go to analyze usage. And it tells me I'm not even close to 1GB! Whats up with that? So I read every single line and notice that the date is from Sept to October. I only joined up Oct. 25th. Shouldn't it show my current analysis from Oct 25th to now? How do I get this number.
Because within the first 3days of using verizon it said I was OVER my 5GB!
I only use FB, email and browse the web. Ebay and shopping channels. At the store they told me 5Gb is more than enough. What do I do? Somebody please help?

Yes I suppose it is. I have a 1gig netbook. The wireless card didn't work anymore ( or so verizon thinks so) So they upgraded me to a 4g wifi hotspot now sitting on my counter. This is the only computer in the house. And we live very rurally. (only reason why I went with this) I have 2 neighbor within 15 acres. And 160 acres behind my house. So I don't think someone is hacking in. Besides, I just got this. Not sure how someone could figure out within 1 day or so that I have one.
THanks

Similar Messages

  • By what time zone does Verizon use to log data usage?  When I checked my current usage, there is data used logged in at early morning times and I don't have anyone else who is up at these times.

    By what time zone does Verizon use to log data usage?  When I checked my current usage, there is data used logged in at early morning times and I don't have anyone else who is up at these times.  I also have 1.8+ GB charged to my allowance that I don't understand at all how it is mine because the highest I've ever logged at any given time has been barely 0.5 GB.  I'm cruising along at .04-.07 GB and all of a sudden appears a 1.8+ GB deduction/usage and it makes me wonder what the ???? is going on.  Is Verizon posting fraudulent usage amounts just to drive up my usage so I have to buy more Gigs?

    The time is not the time of actual use, but the time a tower reports the use. The data would have been used anytime prior to that time. Usually, but no always, the usage happened between the time prior and the time reported.
    For example:
    9:00 AM   1.23 MB
    7:05 AM   0.01 MB
    1:15 AM  350.03 MB
    8:00 PM   23.89 MB
    This does not indicate 350 MB was used at 1:15 AM. It really tell you 350 MB was used sometime between 8:00 PM and 1:15 AM.
    The times are local time zone as far as I can tell.

  • The download button as described on the HELP page doesn't appear on the page with my downloadable list of songs. How do you down load a purchase? I have made 3 purchases of the same song and can not down load it and the HELP instructions don't help.

    The download button as described on the HELP page doesn't appear on the page listing my purchase.
    The HELP instructions list that such a button must be clicked to down load an item.
    I have made 3 purchases of the same song in an attempt to download it.
    Only one of those purchases appears on the page that list purchases available to down load.
    I wrote out a copy of the HELP page instructions (the page can't be printed) so I could accurately follow it as I tried to do the down load.
    Is there some secret to downloading a purchase or causing the down load button to appear?

    Hello L Swarz,
    Thank you for the details of the issue you are experiencing when downloading your purchased song to your iPod nano.
    I am not sure if you have tried these specific steps, but I recommend downloading the purchased song to iTunes on your computer using the steps in the following article:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Help- Flex Start Page doesn't open the Start Page

    Help -> Flex Start Page doesn't open the Start Page.
    I see multiple bug entries regarding this resolved, but no description of what I can do to fix it.
    I'm running Flex Builder Professional on Windows XP

    I've heard this can be caused in IE when the pop-up blocker is enabled. Disable it so pop-ups are allowed, and the Flex Start Page may load.
    If this post answers your question or helps, please mark it as such.

  • "Go Back One Page" doesn't work on first page visited from Home Page

    When opening FF4.0, my homepage opens fine. Whether I manually type a webpage address, use a book mark from list or button bar, once that page opens, the "Go Back One Page" button is still gray and the only way to get back home is to click the "Home" button.
    I tried restarting program and it did not correct anything. I next tried restarting computer and that did not do anything either.
    My system: Core2Quad Q8400 with 8G RAM. BIOS is up to date, as well as all drivers for all hardware.

    Hi,
    Thanks for your reply, but unfortunately browser cache wasn't the problem. I use Firefox(default), IE and Opera for testing and I close the browser most of the times after I deploy the project. Even tough if I don't close the browser I hit the ctrl+f5 several times to avoid the cache problems. I tryed setting the browser to check newer versions every time I open the page, but that didn't help either.
    Like I said the problem occurs in our public deployment server too with everybody who enters the page first time in each session. After login they get the pages with stylesheet within and if they logout they will be redirected to same login page and the stylesheet is loaded correctly. Then if they restart the browser and try to login the application again, they will be faced the same problem.
    Is there anything else I can try?

  • WAN Monitor page doesn't display current latency/packet loss

    The on-plus when you look at the wan stats tab you DON"T see current info...I checked the setting and also tested the monitor which showed issues that generated a email....but I can't see them on the tab...a little help please

    All,
    The OnPlus engineering team has identified a bug that impacts the availability of the WAN Bandwidth monitor and impacts the availability of the historical bandwidth monitor data. A fix is being applied to the On100 software that will restore the monitor functionality.  The new On100 software with the fix will be applied during the maintenance window early tomorrow (2/1/2013) morning. The update will cause the On100 to restart.
    We apologize for any inconvenience this problem has caused.
    Sincerely
    Randall Jones

  • At times there is a message that due to unerypted data, a third party can view your current net page! Is it possible!

    Hi! I am having problem especially at the homepage of Mail Providers that this message is often displayed like, this is an encrypted page with some encrypted data due to which a third computer or party can view the contents!
    Is it possible?

    Yes it is. Email transmissions are not normally encrypted. If you want one which does encrypt your emails, use an email client like Hushmail. See: http://www.hushmail.com/

  • Published page doesn't match page shown on IWeb

    Hi Folks, I have been trying to update my website, but one page won't publish as it is shown on IWeb. All the other pages are fine, but this one changes the font size and colour, changes the format of photos, puts in extra headings that are oddly formatted, and generally looks totally different to the modified page. I have tried reformatting the whole page- and it looks correct on IWeb, but when saved and published it goes weird again.
    Next time I open IWeb, it looks like it should- but again publishes strangely.
    Does anyone have any ideas?
    Thanks!

    Before viewing a freshly published page in the browser make sure you have emptied the browser cache.
    To find out where the problem lies you need to publish your site to a local folder and launch this version in the browser to see if its OK.
    If this version of your site has problems you need to troubleshoot iWeb. The steps required to do this, and more, are shown here under "Troubleshooting" .....
    http://www.iwebformusicians.com/WebMusic/iWebTips.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Image in Lightroom doesn't match exported image viewed in Photoshop

    After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?

    Thanks Jao and Michael...the color management idea makes a lot of sense.
    Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
    The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down.

  • ICloud pages to sync with my mac pages?

    My iCloud Pages doesn't operate like my Pages on my Macbook.  Is there a way to save the Pages document in iCloud and sync with my Pages on my Mac?

    Hi PBinHim,
    Thanks for visiting Apple Support Communities.
    If you are using iCloud Drive with OS X Yosemite and the latest version of Pages, the documents you create in Pages for iCloud (on www.icloud.com) will be available in Pages on your Mac.
    There are several specific requirements for using this feature, and these articles will give you a very helpful overview:
    Pages for Mac 5.0: Use iCloud with Pages
    Using iWork with iCloud Drive
    Pages for iCloud beta: If a document doesn’t appear in Pages for iCloud beta
    All the best,
    Jeremy

  • Phone data usage not matching verizon usage

    Since having my droid turbo, my data usage in my setting has not been matching my usage on my verizon account and another line on my account is having the same issue, right now my phone says that i have used 0.56GB and verizon says i have used 1.03 which is a pretty big difference, the other line on my account that is having the same issue says he has used 0.69 verizon says he has used 2.421 which is a huge difference, i checked the wifi usage for both phones and it seems that the top the data app under wifi usage seem to be making up the difference between the usage in settings and the usage on verizon. I have also seen people online talking about this similar issue which seems to be caused by the phone using mobile data while connected to wifi.  I have been with verizon for over 2 yrs and this is the first phone i have noticed this issue with.  I have also attached screen shots from my phone to prove this issue.  Any help with this problem would be appreciated.
    >> Attachment containing personal information removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    If you want to see the report from VZW on your current data usage then you must sign into the VZW website and access your account.  Only the VZW website will allow you to see any kind of information on your data usage.  The Jetpack itself does not have any data usage metrics installed on it.
    I assume that you already know that the data usage report from VZW is only a summary of your actual usage in terms of various sessions.  The most information that will be disclosed to you are these sessions, their timestamps and how much data was consumed during that session.  If you want the actual statistics for what was consumed then you must setup and maintain your own data usage monitor.

  • Trying to backup from icloud. Enter username and password - OK. Select backup date - OK. I'm then presented with an old username that of course doesn't match my password. Now what?

    Have a disabled iPad2 that's been wiped. Using current IOS system.  Trying to backup from icloud. Enter username and password - OK. Select backup date - OK. I'm then presented with an old username that of course doesn't match my password. Now what?

    Hi Bluehouse44,
    If you are having difficulty restoring your iPad from an iCloud backup you may want to use the steps in this article to try to get back on track -
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How data usage is saved in Current usage / Data   ?

    i like to know who does the data usage is saved under Current usage / Data   ?
    for example at 3:15 shows i used 110 MB  and about 3:40 shows 5MB
    is the 110MB usage  saved as one time use or tru out a x amount time ? and how does Verizon calculate the size of data and time the data was used .
    thank you

        Hello there nosferatu2xlc! Thanks so much for using your Data Usage tool at My Verizon. I love that feature. I recommend any customer with a smartphone do the same as you are! The data usage is calculated at the close of connection. So the 110 mb that you show for 3:15 is all data reported to have been send/received by your phone for a browsing session that ended at 3:15. The same is true for the 5 mb later in the day.  We calculate data based on measurement of info we show transmitted by your phone on your line. I hope that helps!
    Dion M.
    VZW Support
    Follow us on Twitter www.twitter.com/vzwsupport

  • Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?

    Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?
    I bought in 14 january 2014 and the expiration said it will be in 5 september 2014
    Is it mean that my ipad had been activated in 5 sept las year?
    But the packaging is good and it looks like very new.
    Please help me....
    I bought in IT plaza in kuala lumpur, malaysia..
    Heeellllppp...

    The merchant told me it is new. And when they opened the box and turn the ipad on, the ipad asked me to activate first.
    Is the 'restore to factory setting' can make us must activate the ipad again??

  • Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but  Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

    Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
    Is it a bug?

    Sorry for the huge chunk of code.
    Mm, yes, I'm far too lazy to read all that.
    But you should be overriding paintComponent(), not paint().
    http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
    I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

Maybe you are looking for