Data usage - IOS 5.1 - Using cell data when connected to my WiFi
Hi all,
Can anyone help please... My iphone 4s has used 7mb of cell data since yesterday even though I haven't left the house and have constantly been connected to a wifi network.
Does anyone know why this is ?
I have noticed that when I switch the phone on and off it seems to use cell data (having checked my data allowance before and after).
Also, I have the ...wtih friends game (Words and Hanging) and they have the badge numbers displayed in red when it's my go. Could it be that ?
All my location services are off, expect for the cell search, maps and siri (do I need siri to use my location???)
Why is it using cell data when I have constantly been connected to wifi ?
Please help
Thanks
B.... UK on O2 network
beecart wrote:
ALSO... Having looked at my bill it appears that every single nght at midnight there is some form of data transfer around 1mb... Anyone know what this is? As most of the time I am asleep!
Thanks
I would suspect thats the Diagnostics and Usage. Go to settings>general>about>diagnostics and usage and set for "dont send". Also settings>location services>system services>diagnostics and usage>switch off.
I will say I am not 100% on what the switch actually does but the send automatically definitely sends the data to Apple
Similar Messages
-
What is the data usage for ipad mini on stand by when connected to WIFI?
We connected 34 ipad mini's for yacht WIFI network that has internet access. Now data usage is 1GB/h higher for the all connections than before.
None of the ipad's are used for internet. My question is what is the data usage when ipad is is standby usage and how I can stop is downloading/uploading.
This slows down internet for rest of the users in same network.
Please help.Check out this Apple article -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
It'll walk you through uninstalling iTunes and the other Apple software. -
Iphone 5s Data Consumption... is it Facebook...is it using cell data when on wifi?
I recently purchased a new I-phone 5s for my wife. Since receiving the phone our data usage has gone up exponentially. We used to have a 2GB plan and never went over, this month we've already gone over our new 4GB limit and still have 9 days left on the cycle. So obviously I've been trying to figure out what is causing this new and dramatic upswing in data usage. Our phone habits have not changed, she had an android smart phone before and used it just as much as the new I-phone. Here's my top 2 suspects.
1. Facebook - Under settings -> Cellular at the very bottom is a list of apps that you can grant or deny permission to use cellular data. Under each app is the amount of cellular data that has been used by that app. As you can see in this picture Facebook has used 4.9 GB, an insanely high amount. I just read an article on the web that describes a feature of the Facebook app which preloads video so that they play more smoothly... every single video you come across whether you watch it or not is being downloaded. There is a way to turn this off. Under Settings find the Facebook app, open it and click Settings again. Turn "Auto-play" to wi-fi only or just turn it off.
2. Cellular Data being used even when phone is connected to Wi-fi -
Google it and you will find dozens of articles. This is not speculation. Apple has recognized it and calls it a glitch. Verizon has apparently stated that customers affected by this glitch will not be billed for excess data consumption. This was reported as far back as 2012 and Apple apparently put out a fix. I can't say for certain my wife's phone has been using cell data while on wi-fi, but I suspect it may be. My wife is home most of the time, she's a Nursing student, recently graduated, and so is usually at home studying and should be on the wi-fi network. Yet her phone consumes 6 to 10 times more data than mine and I'm out of the house most of the time. If this is true I haven't found a fix for it. If anyone has I'd like to hear about it.It looks like it 4.9 GB on the cellular data. Turn it off in the same screen of which you posted to prevent further data usage.
-
How to define data-sources-alias.xml to use Oracle data source
Hi,
I created Oracle jdbc Data Source named "MYDS" in Visual Admin. I added the alias = MYDS_ALIAS. I set the Initial Connection to 2. On the Monitor tab, I see a green line running across the screen. The datasource MYDS is connected to the Oracle.
Now, I would like to define "data-sources-alias.xml" to use MYDS.
When creating data-source-aliases.xml it creates the alias by default on ${com.sap.datasource.default} which is the default DB.
I followed the link --> How to point data-source-aliases.xml to another Datasource
and my data-sources-alias.xml is now:
<data-source-aliases>
<aliases>
<data-source-name>$</data-source-name>
<alias>BRANCH50DS</alias>
</aliases>
</data-source-aliases>
The "EAR generatation has finished successfully", but when "Deploy to J2EE Engine", I got the error below:
1) How to define data-sources-alias.xml to use Oracle data source?
2) I found the link (SDA Deployment error) talking about "sda-dd.xml". How to create "sda-dd.xml" and make it use substitution variables "MYDS"
Dec 20, 2005 3:53:41 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[003]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7181 - 630_SP]/>
<!NAME[C:\usr\sap\J2E\JC00\SDM\program\log\sdmcl20051220205339.log]/>
<!PATTERN[sdmcl20051220205339.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Dec 20, 2005 3:53:39 PM Info: -
Starting deployment -
Dec 20, 2005 3:53:39 PM Info: Loading selected archives...
Dec 20, 2005 3:53:39 PM Info: Loading archive 'C:\usr\sap\J2E\JC00\SDM\program\temp\temp856850022Ear.ear'
Dec 20, 2005 3:53:40 PM Info: Selected archives successfully loaded.
Dec 20, 2005 3:53:40 PM Info: Actions per selected component:
Dec 20, 2005 3:53:40 PM Info: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
Dec 20, 2005 3:53:40 PM Info: Saved current Engine state.
Dec 20, 2005 3:53:40 PM Info: Error handling strategy: OnErrorStop
Dec 20, 2005 3:53:40 PM Info: Update strategy: UpdateAllVersions
Dec 20, 2005 3:53:40 PM Info: Starting: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
Dec 20, 2005 3:53:40 PM Info: SDA to be deployed: C:\usr\sap\J2E\JC00\SDM\root\origin\sap.com\50022Ear\localhost\2005.12.20.15.53.28\temp856850022Ear.ear
Dec 20, 2005 3:53:40 PM Info: Software type of SDA: J2EE
Dec 20, 2005 3:53:40 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 20, 2005 3:53:41 PM Info: Begin of log messages of the target system:
05/12/20 15:53:40 - ***********************************************************
05/12/20 15:53:41 - Start updating EAR file...
05/12/20 15:53:41 - start-up mode is lazy
05/12/20 15:53:41 - com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
at com.sap.engine.deploy.manager.DeployManagerImpl.makeTempEar(DeployManagerImpl.java:3727)
at com.sap.engine.deploy.manager.DeployManagerImpl.makeNewEar1(DeployManagerImpl.java:3695)
at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:523)
at com.sap.engine.deploy.manager.DeployManagerImpl.update(DeployManagerImpl.java:512)
at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:196)
at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:46)
at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:127)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:96)
at com.sap.sdm.apiimpl.local.DeployProcessorImpl.deploy(DeployProcessorImpl.java:67)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.requestRemoteCall(RemoteProxyServerImpl.java:127)
at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.process(RemoteProxyServerImpl.java:38)
at com.sap.sdm.apiimpl.remote.server.ApiClientRoleCmdProcessor.process(ApiClientRoleCmdProcessor.java:81)
at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:280)
at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
at java.lang.Thread.run(Thread.java:534)
05/12/20 15:53:41 - ***********************************************************
Dec 20, 2005 3:53:41 PM Info: End of log messages of the target system.
Dec 20, 2005 3:53:41 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 20, 2005 3:53:41 PM Error: Aborted: development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Dec 20, 2005 3:53:41 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Dec 20, 2005 3:53:41 PM Error: -
At least one of the Deployments failed -Hi,
If you remove the $ and braces (as shown below) it will work.
<data-source-aliases>
<aliases>
<data-source-name>MYDS</data-source-name>
<alias>BRANCH50DS</alias>
</aliases>
</data-source-aliases>
Regards,
S.Divakar -
Weblogic will encrypt the Data which are accesssed by using its Data Source
The Connection Pool and Data Source created from Weblogic , will encrypt the data which are accessed by using this Data source and Connection Pool from the DB?
If not how we can secure the data which are accessed from this Data Source?
Bye
SrinivasanThe connection between WL and the database can be encrypted; your DBA needs to configure the encryption on the database and then you set properties in the connection pool.
If you want to encrypt the data within the database, some databases can also do that. -
Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
iOS 8.2 on iPhone 5c, goto settings, cellular, use cellular data for: all my apps under "use cellular data for" are greyed out. I've restart and hard reset. Looked thru all settings. Can someone help??
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again? -
IOS 5.1 using cellular data with no apps open
Just upgraded iphone 4s to iOS 5.1. Now when I am not connected to wifi, my cellular data usage is constant and rapid. No apps are open, no data usage that I am aware of. But when I check the cellular data usage, it goes up by about 1MB every minute. Just the day before on iOS 5.0, no cellular data would be used with all apps closed.
Iphone 3GS. updated to iOS 6.0.1 Friday. Data usage until then about 300MB
Sunday Morning around 4am. Phone incredibly hot even though connected to charger and home Wifi network. Usage exceeds 3GB for month and extra 3.5GB. Total usage in 12 hours 6.5GB.
Sunday afternoon after receiving message from AT&T about excess data, turned off Cellular Data and 3G and limited to only Wifi.
Monday evening 2GB cellular data. Total data usage in 2 days 9GB????? W/T/F ???
Even when 3G and cellular data is turned OFF, 2GB used up?
Now, turned OFF Cellular data and Wifi and using it as a regular phone with texting and calling. Maybe will buy a regular phone and be done with all these useless charges. Someone should be held accountable here.
PO. -
Charged for Data usage I didn't use
I have been experiencing extreme amounts of data usage for the last two months. I just checked my usage 6 days into the billing cycle and I am already at a gigabyte. I have not changed usage habits since I have had this phone. I have a Samsung Galaxy 4G phone, I do not download pictures, music, or video. I usually get 10-20 emails a day and use the navigator occasionally. I do not use a mobile hotspot and use WIFI in my home. I have contacted Verizon about this and they were no help. I noticed on the community forum that many people are experiencing the same problem. My wife and I each have phones with Verizon and a Verizon home phone all of which are on expired contracts. We have done all the things recommended by the forum and I now wonder if this is a ploy by Verizon to get us to up the data on our plan. Is it possible someone can hi-jack the data from a cell phone? If I don't get this resolved I will be looking for another provider soon.
No there is no secret ploy by Verizon. Please people enough with the conspiracy theories. Explain how come we never have these issues? We have 5 lines on a 6 GB data plan. That's far below the 10 GB the website recommends. The most data we've used in a month in 2.5 GB. Now if Verizon had this plot to secret up people's data to get them to get higher data plans they are sure doing a lousy job if it on my lines. Am I on Verizon's "do not scam " list or something?
You may think you have everything set right but obviously you don't. Most of the issues here are with iPhones because Apple stupidly set every to use mobile data as the default and in fact makes it where some apps ONLY work on mobile data. Some apps have background data that use mobile data and do it constantly. I suspect it's your e-mail app. Assuming your phone is a Galaxy S4( you don't really make that clear ) Go to Settings them press Mobile Data set the data usage cycle to the dates that your billing period is and it should tell you EXACTLY which apps are using data during your billing cycle. Then you can press the app and it will tell you how much foreground and background data that app is using. -
Data Usage Error- iPhone reports using 4GB sent & 4.1GB received??
My iphone 4 reports having Sent 4GB and received 4.1GB of data. There's no possible way I could've used that much data, especially sending that much. I hardly use 3G and I remain on WiFi where it's available. I also reset my usage statistics at the start of billing cycle so it's not accumulated. I contacted AT&T knowing that that amount of data would cost a fortune seeing that I'm only on the 200 mb plan. I figured it had to be an error of some sort because I never received an alert for reaching the half or full data limit. AT&T replied that I have only used 75 mb. What a relief! I remained on the phone for another 40 minutes trying to find out why I got an error. However, they weren't able to help me.
To avoid being stuck on the phone for another 40 minutes, I went to the Genius Bar. The "Genius" there had no idea why the phone reported that amount. He claimed that the amount was accumulated, I replied that there's no way I could've used that amount of data since July and I have reset the counter on 10/4/10. My send data is always 1/10th of what I receive. He claimed that the data counter includes Wifi usage. I stressed that the counter says that it is "Cellular Network Data" again and again seeing if he might correct himself. His final solution was to just restore the phone.
I went home, reset the usage counter, connected to wifi, downloaded and an app, and voila! the data usage says 0 bytes received proving that my wifi has not been running up the counter. Apparently Apple needs restaff that store.
I've discovered a few ways to accurately check my data through AT&T:
1) Get AT&T's myWireless app (which I am unable to access because I am not the AT&T account holder.)
2)*3282# receives an alert on data usage.
3) simply call AT&T
Here's my question: How could the counter come up with that outrageous of a number? I wouldn't want it to someday send that data amount to AT&T and bill me for it."Here's my question: How could the counter come up with that outrageous of a number? I wouldn't want it to someday send that data amount to AT&T and bill me for it."
Just to reassure the op, that is not how your bill is calculated, so don't fear that. AT&T has to bill you for the data as calculated by their equipment on their end. They cannot charge you for data that their in-house systems cause.
Also, the iPhone records all data, not just that which actually incurs a bill entry on your statement. Reset your counter before going to bed, and clear all apps from the recent task bar, and make sure no background tasks are running (no push mail and so forth). Check your useage in the morning, and there will be at the very least a few 10's-100's of kilobytes sent and received. I have never heard a detailed explanation for this, but it is some sort of housekeeping data exchange. This data will not show on your billing statement.
At least that has been my experience with my 3Gs and AT&T.
Others have reported far greater data flow overnight then what I typically see (I've never had more than 250K), again without getting an explanation from AT&T about what it is, but they are not being charged for it. -
Please can RIM / Blackberry develope for the z10 an Internet Data Usage Tracker or Internet Data Usage Monitor for 4G / 3G / WiFi / Edge !
IF YOU AGREE, PLEASE LIKE THIS THREAD AND COMMENT "I agree if you like"If you agree, click on like above..
-: DrewRead :-
Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
"Like it" if you like it. -
Since updating to iOS 6 iPad uses cellular even though I'm on WiFi
Since updating to iOS 6, my iPad uses cellular to down load everything, even though I'm on my home WiFi. It shows that it is connected to my WiF, but, does't use it. As a result, my cellular usage has gone thru the roof. iOS 5.1 did not do that. iOS 5 would automatically switch to my network and work within my network and not cellular. Other than switching off cellular when I'm home, is Apple going to fix this bug or any other suggestions?
Your answer was true with iOS 5.1 however, not with iOS 6. It's the same problem is occurring with iPhone 5. Apparently Apple has issued a patch for iPhone 5 using Verizon's cellular network. My iPad (3) uses Verizon's cellular network.
Not looking to avoid cellular charges but wanting my iPad to switch to WiFi when it's available. For example, at home my WiFi is on ALL the time. The icon showing that WiFi is on and active shows up in the upper left corner (as well as the Verizon icon) however, is still operating on the cellular network. I want the connivence I had with iOS 5. I don't need to be switching manually. -
After Upgrading to IOS 5.1 I am having issues connecting to the WIFI
After updating to IOS 5.1 i am having ptoblems connectng to the WIFI.
If I reboot my wireless route it will connect
Without the reboot it will just set and search.
My wife's phone is running 4.2.1 and connects everytime.
Can I back out of the upgrade easily until the problem is fixed? My Data plan minutes are on the rise.....I have upgraded the router to the latest rev.. Still does not work... My computer connects fine and my wifes phone connects fine
-
HT3529 Can i set my phone to use imessage only when connected to wifi?
I just got a new iPhone and i like how i can use imessage to text my friends because i don't get much service at my house but i have wifi. However, when i'm out i'd like to send normal texts without imessage so it doesn't use my data. Is there a way to set my phone to only use imessage when connected to wifi? I know i can manually turn off imessage but i would rather not have to turn it off every time whenever i am out.
No.
Text only uses very little data - miniscule, and MMS with the iPhone uses cellular data. -
This does not happen when connected to a docking device or computer, only when it is being used with headphones. If I reboot, it's fine, but it does happen again.
Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice.
Maybe you are looking for
-
I'm running a Toshiba Satellite laptop that was originally running Windows Vista 32-bit, but was upgraded by me to Windows 7 32-bit. On Windows Vista, all I would run was Firefox. I loved it!!! On Windows 7, I've noticed that Firefox kept hanging whe
-
How would i move a panel in a custom component ?
Hi All I have a custom VGroup component that i am using for navigation on a web application. In the VGroup i have 6 Panels and inside each Panel between 3 & 10 LinkButtons. How would i move a Panel to below the first Panel of the VGroup Component,
-
Importing adaptive RFC model in NWDS CE 7.1 doesn't work
Dear all, I am unable to create an adaptive RFC model in my Web dynpro DC in NWDS CE 7.1. This is what happends: I select create model from the web dynpro, fill in name and jco destinations on the first page and move to the second page where I fill i
-
Java IO for different file encodings
Hi, I need a file reading mechanism, wherein i should be able to read files of just about any encoding (eg Shift JIS, EBCDIC, UTF, Unicode, etc). I could do this using the following code: FileInputStream fis = new FileInputStream("D:\\
-
ios 8 keeps crashing on my iPad 2. Has anyone got a solution to this. My iPad 2 was great before upgrading. It's so bad that now I want to throw my iPad out so if anyone has tips to enhance my iPads performance please share.