Data use by line

With the new Shared Everything, how can I see data use by line? I would like to know which of my lines is using the most data.

If you are the Account Owner, log into your on-line MyVerizon account and click on the blue Usage Details under My Usage. Scroll down and click on the blue View Data Details under the data usage chart. Use the drop-down to select the appropriate line.

Similar Messages

Adobe Reader importing XML data using command line reference

Financial Gonverment in Poland prepared new VAT declarations, which are protected from changing.
Restrictions summary is as follows: Printing, Commenting, Filling of form fields: Allowed; other restrictions are not allowed.
I am able to export xml data, using Acrobat Reader, change it to have desired data and than import it and everything works fine. In ERP program I need to fill this document with data from the system. Normally we were doing this using FDF printing channel, but for this document it shows an error with bad user password. We were talking with people from government and only answer was that it is not possible to change document restrictions... We find out the way to create xml document, but we want it now to open from the command line (UNIX commands). But we only find the way to open pdf file with specified fdf file... But when I'm trying to open PDF document with specified fdf URL (url is linked to xml file... i don't know if it is proper... if not than how to create fdf file with desired xml?)
Is there any possible to open a pdf with specified xml url to load to that PDF?

I found the mistakes I made and I corrected them. The newly revised/corrected code is:
USE OPENXMLtesting1
GO
With XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'C:\Temp\books.xml', SINGLE_BLOB) AS XmlData
SELECT *
FROM XmlFile
GO
It worked: Results
Contents
1 <catalog><book.id="bk101"><author>Gambardella.M...
If I clicked on this, I got a listing of the whole book.xml!! I don't know what it means. Please comment and respond.
Thanks,
Scott Chang

InfoCube Design for Variable data - Use of Line Item Dimensions

I have an infoprovider based on billing conditions which we have extended the extractor structure for 2LIS13_VDKON and we now have a requirement to add Customer fields such as Customer Purchase Order Number and Contract Number. These fields are obviously highly variable. I have added to them to the reporting DSO and now need advice on what is the best way to add these types of fields as reportable dimensions to the infocube so as to not impact performance? I currently have 9 dimensions with multiple charachteristics and a time dimension. Should I just create a line item dimension for Purchase Order? Problem is I have 8 other line item dimensions to add which are customer specific reporting fields that we capture on the sales order and wish to report on. I know there is a limit of 16 dimensions and I am also concerned about performance.
Any advice is greatly appreciated
Lee Lewis

Hi,
To make sure that the infocube you have created should not have any performance issue: Please do the following
Go to RSRV > All elementary tests-> Database---> database information about infoprovider tables
Upon clicking on database information about infoprovider tables, on the right hand side, in the parameter enter your infocube name and execute and see the log: ( log will automatically popping up once you are done with execution )
There see the database infomation about infoprovider:
This log wil make you to understand how well you have designed your infocube and make sure that each (f ) table corresponding to each dimension will not exceed 20 % of the infocube size.
You create dimensions of infocubes in a such a way ( whether line item or normal dimension ) so that any of the dimensional F table will not exceed 20 % of the infocube size.
Actually this will give us the information of the size of the data of particular dimension and there by if any particular dimension is exceeding the 20 % of the infocube size, then you need to create line item dimension for the characteristics existing in that dimension .
After creating again, test it and see whether any of the dimension table exceeding 20% infocube size .
Repeat this process until you see all dim F tables less than 20 % of the info cube table size
This will negate any performance issues arise in reporting
Edited by: S Simran on Nov 6, 2009 10:11 AM

How to cut off data use on a line in a family share plan?

Is there a way to cut off data useage on one line in a family share plan? I have one person that is going over and want to simply cut off the data use after she reaches say 110% of her use in the billing cycle.

I agree get Family Base and charge then the extra $5 it will cost since that person doesn't seem to understand the concept of SHARING. Or up the data plan and charge the extra to them and tell them since you had to increase the data plan because them they can pay the extra mount.

2g data allowance in single line plan is only for 4g LTE or for all data using?

I got a single line plan and an iPhone 5s a couple days ago. I am confused the data allowance is for 4g LTE only or for all data using? Thank you!

Hello edsun1997
I would love to answer this for you. You have 2 GB's to use on our network this will start over at the beginning of your cycle. If you use Wifi and turn off our network, Wifi would not go against that 2 GB bucket.
JoeL_VZW
Follow us on Twitter @VZWSupport

How to purge data cache table using command line

Hi:
Is there a way to purge the data cache table using command line?
thanks!

Thanks, Mike.
I'm thinking about the ldconsole provided with ALDSP.
The ldconsole has a link for purging the cache. Is there anything I can leverage from there? Is it a JMX component that I can call?

Need Help importing data using PHP to convert it into a single HTML line

Hi, My names Chance
I'm a 2nd year web design student and have been assigned a project by my teacher for a charity website
i found a tutorial of exactly what i need to do but im stuck on creating a script to import and convert php data
to a single html line
heres the link to the the script, if you scroll down to the bottom
where it says
RSS or XML Data Source
"The scrolling text can be imported from any source: RSS, XML or any other format.
For example, if you want to import data using PHP to convert it into a single HTML line to be displayed by the ticker, create a php script to import and convert the data, and include it directly in the DIV tag as follow"
this is what i need help doing
http://www.mioplanet.com/rsc/newsticker_javascript.htm
i already have the php code that i want to import
i just need to know how to import and convert my php script so im able
to make the the javascript from the link i provided to work
thank you so much for your time
if you have any question or answer please email me
[email protected]
thanks again hope to here from you soon

Hi
The instructions are there on the page you provided a link to!
What is it you do not understand?
PZ
www.pziecina.com

How to compare delivery date in schedule lines and PGI in outbound delivery

Hi,
I want to create a report to monitor and compare different dates in sales and delivery process.
One of my key figure is the comparison between date confirmed to the customer, that I can find in the schedule line of the sales order, and the actual goods issue date from the outbound delivery.
But I can't succeed in making the link between delivery and schedule lines, means between LIKP and VBEP.
Would you have any idea?
Thank you.

It seems there's no exact (table) connection / link between delivery item and schedule line item.
Those who were searching for this thing (link / connection between delivery item and schedule line) were recommended to use FM "RV_SCHEDULE_CHECK_DELIVERIES".
This FM calculates the delivered quantity for each schedule line, so it makes link between the delivery item and schedule lines - however if you check the code it's quite sophisticated...
(if you put a breakpoint in the FM and display a SO in VA03, you can check how the parameters have to be populated with data).
Schedule Line and Delivery Link
Edited by: Csaba Szommer on Aug 5, 2011 12:03 AM

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Use of LINE OF statement

Hi all,
what is the use of LINE OF statement?
DATA:       itab_iv_item TYPE TABLE OF   bapi_incinv_create_item,
                 itab_return TYPE TABLE OF bapiret2.
DATA:       wa_iv_item LIKE LINE OF itab_iv_item,
                 wa_return LIKE LINE OF itab_return.
what these statements do
DATA:       wa_iv_item LIKE LINE OF itab_iv_item,
                 wa_return LIKE LINE OF itab_return.
Thanks in advance
krupali.

Hi KR.,
1.
types: begin of st1,
          <fields>
          end of st1.
data: wa type st1.
Here we are declaring the wa by using the syntax TYPE. because here we know the structre.
2.
data: wa type vbak.
Here we are declaring the wa wrt Database Table so here we can use TYPE syntax again.
3.
data: begin of itab occurs 0,
            <fields>
            end of itab.
    data: wa like line of itab.
Here we are declaring the wa wrt internal table which is having header line and body, so we can't use TYPE here, we must go for LIKE LINE OF syntax.
4.
data: itab like vbak occurs 0 with header line.
    data: wa like line of itab
       (or)
     data: wa type vbak.
Hope it clear?
Thanks,
Naveen.I

How to get GR posting date for schedule line of scheduling agreement?

I had hard time to tie the GR date to schedule lines. I need this information to generate vendor performance report. However, the GR date is tied to scheduling agreement item level only. One item line can have multiple schedule lines. Is there a way to link the GR date to actual schedule line? Thanks in advance!

Hi,
There will be icon called PO history in the over view screen of SA.Select the item and press it.May be this will be some what useful to you.
Regards,

Control parallel port (data and control lines)

I need to control the output on the parallel port (LPT1) - Both data and control lines. Once the data is written (Pins2-9), I then need to toggle the Sprocket signal (PIN1) - on the parallel port. The sprocket signal is also referred to as the Data Strobe Output.
The required method is as follows:
1. Lower the sprocket signal on PIN1
2. Send the data (Pins2-9) and wait
3. Raise the sprocket signal and wait.
4. Repeat.
I am looking for a method to control the data on LPT1 pins 2-9 and then be able to toggle PIN1 - Strobe signal - without the data falling from the other pins. What I have found is that whenever the state is changed on the strobe - the data that was written to Pin2-9 falls to zero. This will not work for my application - the strobe tells the hardware device that the data is ready. If it falls to zero when I toggle the strobe - that will not work.
Regards,
Guy

Hello Adam,
I am familiar with both references. If you look more closely at the library reference - it allows me to communicate using VISA across the parallel port pins 2-9. It does not permit direct communication to pin1 (the strobe signal) - property nodes don't allow the strobe to be refereced either (similar to control lines/signals for COM ports).
Worse, I have also located examples using OUT PORT that does enable pin1 to be toggled. The problem is, when those VIs are used, the data falls from the data pins when the strobe signal is written, even if its value is not changed. For example, if the strobe is already high, if another high value is passed, the data falls from the data lines. The other issue, when using VISA, as soon as the data is writen, the strobe signal automatically goes high even though I need a wait before setting the strobe high. This is in complete contradiction to the second article you referenced which clearly discusses writing data to pins2-9 then taking the strobe high to indicate to the printer that new data is available. It must be possible since this is the typical handshake.
I am still looking for a more complete answer/solution.
Regards,
Guy

How to get the Delivery date in PO line Item in SAPScript

Hi Gurus,
I am working on PO Script (MEDRUCK). I copied the Standard to a Z form. ZMM_MEDRUCK, Now I need to print the the Header text at the end of MAIN window. I put Iem number along with the other line Item informmation like stanadrd PO Script MEDRUCK. I also want to show the delivey date with line Item, so Itried to use EKET-EINDT but it is returning the delivery date of last line item, means while printing the first line and other information it is showing the delivery date of the last line item, I tried with the PEKPO-EINDT it is also not working.
Can any body suggest me how i can get the delivery date for the respective line Item ?
Regards
Sony

actually your are picking up the correct data from Table EKET (EKET-EINDT) but your are printing that in item data loop for EKET might have already executed in your script and the header of that internal table consist the last entry of the table so for that. Fetch the delivery date explicite from the Table EKET when your in item level processing and print that.
For Example u can use this code.
To print you have write the this code in Script item level printing window "MAIN" window
Following perform is called to get the line item delivery date in PO
{/: PERFORM GET_DEL_DATE IN PROGRAM ZPerform_prog
/: USING &EKPO-EBELN&
/: USING &EKPO-EBELP&
/: CHANGING &DEL_DATE&
/: ENDPERFORM}
{* Dellivery date &DEL_DATE& }
write the below code in the Z program "ZPerform_prog"
{ FORM get_del_date TABLES in_par STRUCTURE itcsy
                         out_par STRUCTURE itcsy.
READ TABLE in_par WITH KEY 'EKPO-EBELN'.
CHECK sy-subrc = 0.
$_po_no = in_par-value.
READ TABLE in_par WITH KEY 'EKPO-EBELP'.
CHECK sy-subrc = 0.
$_po_line = in_par-value.
SELECT *
FROM eket UP TO 1 ROWS WHERE ebeln EQ $_po_no AND ebelp EQ $_po_line.
    $_del_date = eket-eindt.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal            = eket-eindt
      IMPORTING
        date_external            = $_del_date
      EXCEPTIONS
        date_internal_is_invalid = 1
        OTHERS                   = 2.
    READ TABLE out_par WITH KEY 'DEL_DATE'.
    CHECK sy-subrc EQ 0.
    out_par-value = $_del_date.
    MODIFY out_par
                INDEX sy-tabix.
    CLEAR : $_po_no , $_po_line ,$_del_date.
ENDSELECT.
ENDFORM.                    "GET_DEL_DATE }

Restful service unable to insert data using PL/SQL.

Hi all,
Am running: AL 2.01 standalone mode on OEL 4.8 in VM box A.
Oracle database 10.2.0.4 with Apex 4.2.0.00.27 on OEL4.8 in VM box B.
Able to performed oracle.example.hr Restful services with no problem.
Unable to insert data using AL 2.0.1 but works on AL 1.1.4.
which uses the following table (under schema: scott):
create table json_demo ( title varchar2(20), description varchar2(1000) );
grant all on json_demo to apex_public_user; and below procedure ( scott's schema ):
CREATE OR REPLACE
PROCEDURE post(
    p_url     IN VARCHAR2,
    p_message IN VARCHAR2,
    p_response OUT VARCHAR2)
IS
l_end_loop BOOLEAN := false;
l_http_req utl_http.req;
l_http_resp utl_http.resp;
l_buffer CLOB;
l_data       VARCHAR2(20000);
C_USER_AGENT CONSTANT VARCHAR2(4000) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)';
BEGIN
-- source: http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
utl_http.set_response_error_check(false);
-- Begin the post request
l_http_req := utl_http.begin_request (p_url, 'POST', utl_http.HTTP_VERSION_1_1);
-- Set the HTTP request headers
utl_http.set_header(l_http_req, 'User-Agent', C_USER_AGENT);
utl_http.set_header(l_http_req, 'content-type', 'application/json;charset=UTF-8');
utl_http.set_header(l_http_req, 'content-length', LENGTH(p_message));
-- Write the data to the body of the HTTP request
utl_http.write_text(l_http_req, p_message);
-- Process the request and get the response.
l_http_resp := utl_http.get_response (l_http_req);
dbms_output.put_line ('status code: ' || l_http_resp.status_code);
dbms_output.put_line ('reason phrase: ' || l_http_resp.reason_phrase);
LOOP
    EXIT
WHEN l_end_loop;
    BEGIN
      utl_http.read_line(l_http_resp, l_buffer, true);
      IF(l_buffer IS NOT NULL AND (LENGTH(l_buffer)>0)) THEN
        l_data    := l_data||l_buffer;
      END IF;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
      l_end_loop := true;
    END;
END LOOP;
dbms_output.put_line(l_data);
p_response:= l_data;
-- Look for client-side error and report it.
IF (l_http_resp.status_code >= 400) AND (l_http_resp.status_code <= 499) THEN
    dbms_output.put_line('Check the URL.');
    utl_http.end_response(l_http_resp);
    -- Look for server-side error and report it.
elsif (l_http_resp.status_code >= 500) AND (l_http_resp.status_code <= 599) THEN
    dbms_output.put_line('Check if the Web site is up.');
    utl_http.end_response(l_http_resp);
    RETURN;
END IF;
utl_http.end_response (l_http_resp);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line (sqlerrm);
raise;
END; and executing in sqldeveloper 3.2.20.09 when connecting directly to box B as scott:
SET serveroutput ON
DECLARE
l_url      VARCHAR2(200)   :='http://MY_IP:8585/apex/demo';
l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
l_response VARCHAR2(30000);
BEGIN
post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;which resulted in :
anonymous block completed
status code: 200
reason phrase: OK
with data inserted. Setup using 2.0.1
   Workspace : wsdemo
RESTful Service Module: demo/
          URI Template:      test
                Method: POST
           Source Type: PL/SQLand executing in sqldeveloper 3.2.20.09 when connecting directly to box B as scott:
SET serveroutput ON
DECLARE
l_url      VARCHAR2(200)   :='http://MY_IP:8585//apex/wsdemo/demo/test';
l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
l_response VARCHAR2(30000);
BEGIN
post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;which resulted in :
status code: 500
reason phrase: Internal Server Error
Listener's log:
Request Path passes syntax validation
Mapping request to database pool: PoolMap [_poolName=apex, _regex=null, _workspaceIdentifier=WSDEMO, _failed=false, _lastUpdate=1364313600000, _template=/wsdemo/, _type=BASE_PATH]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
demo/test matches: demo/test score: 0
Choosing: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as current candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
Tenant Principal already established, cannot dispatch
Chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST demo/test
demo/test is a public resource
Using generator: oracle.dbtools.rt.plsql.AnonymousBlockGenerator
Performing JDBC request as: SCOTT
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: Error occurred during execution of: [CALL, begin
insert into scott.json_demo values(/*in:title*/?,/*in:description*/?);
end;, [title, in, class oracle.dbtools.common.stmt.UnknownParameterType], [description, in, class oracle.dbtools.common.stmt.UnknownParameterType]]with values: [thetitle, thedescription]
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
java.sql.SQLException: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:205)
        at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1043)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
        at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
        at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4755)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
        at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
        at oracle.ucp.jdbc.proxy.CallableStatementProxyFactory.invoke(CallableStatementProxyFactory.java:101)
        at $Proxy46.execute(Unknown Source)
        at oracle.dbtools.common.jdbc.JDBCCallImpl.execute(JDBCCallImpl.java:44)
        at oracle.dbtools.rt.plsql.AnonymousBlockGenerator.generate(AnonymousBlockGenerator.java:176)
        at oracle.dbtools.rt.resource.templates.v2.ResourceTemplatesDispatcher$HttpResourceGenerator.response(ResourceTemplatesDispatcher.java:309)
        at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:88)
        at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:412)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:162)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
        at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:65)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
        at java.lang.Thread.run(Thread.java:662)
Error during evaluation of resource template: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-idPlease advise.
Regards
Zack

Zack.L wrote:
Hi Andy,
Sorry, forgot to post the Source that's use by both AL1.1.4 and AL2.0.1.
Source
begin
insert into scott.json_demo values(:title,:description);
end;
it's failing during the insert?
Yes, it failed during insert using AL2.0.1.
So the above statement produces the following error message:
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted delimited-idThis suggests to me that an unprintable character (notice how there is nothing between the double quotes - "") has worked its way into your PL/SQL Handler. Note how the error is reported to be a column 74 on line 2, yet line 2 of the above block should only have 58 characters, so at a pure guess somehow there's extra whitespace on line 2, that is confusing the PL/SQL compiler, I suggest re-typing the PL/SQL handler manually and seeing if that cures the problem.

Data use by line

Similar Messages

Maybe you are looking for