Data View and Data Source buttons Greyed out

I have Site Admin permissions on an On Prem SharePoint 2013 site.
In SharePoint Designer 2013 the Data View and Data Source buttons are greyed out.
Can anyone shed some light as to why this is occurring?

Hi grantzre,
Could you provide a screenshot about the location you want to insert the Data View web part and Data Source?
I think you may put the mouse cursor in the incorrect place to add the data view web part, please try putting the cursor before the tag </ZoneTemplate> and see if "Data View" button is enabled, then you can insert an empty
dataview web part and then insert the data source in tag <DataSources> by clicking ribbon button "Data Source" (also click the ribbon button "Parse HTML" of the page if needed).
Thanks
Daniel Yang
TechNet Community Support

Similar Messages

Data view and data structure

whats the difference between a data view and a data structure

Hi
<b>View:</b>
Data about an application object is often distributed on several tables.
By defining a view, you can define an application-dependent view that combines this data.
The structure of such a view is defined by specifying the tables and fields used in the view.
Fields that are not required can be hidden, thereby minimizing interfaces.
A view can be used in ABAP programs for data selection.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
<b>Structures:</b>
A structure (structured type) comprises components (fields).
Types are defined for the components.
A component can refer to an elementary type (via a data element or by directly specifying
the data type and length in the structure definition), another structure or a table type.
A structure can therefore be nested to any depth.
Structures are used to define the data at the interface of module pools and screens
and to define the parameter types of function modules.
http://help.sap.com/saphelp_47x200/helpdata/en/ac/3547360f2ea61fe10000009b38f839/frameset.htm
Kindly assign points for useful answers!
Best regards,
Thangesh

Fix and Fix All buttons greyed out in Analyzed Results List

The Fix and Fix All buttons are greyed out in the Analyzed Results List. This was working preTiger at least. Perhaps after my initial clean install of 10.4.1. Now running 10.4.3. Things I've tried to no avail:
Reading the documentation and "Late Breaking News".
Repaired permissions.
Repaired disk. (found no problems)
Ran Disk Warrior (found no problems)
Trashed SountrackPro prefs file.
Tried several existing and three new Audio File Projects on the internal and an external firewire drive.
Searched for a similar topic in this forum.
TIA for any help, Ken

It works for me.
First you have to select what you want to fix (e.g.
clicks and pops) then press the analyze button to get
a list of things to fix.
Right after the analysis is done, if at least one
thing was found to fix,you should see the "fix all"
button not greyed out, but the "Fix" button will be
greyed out until you actually click on one or more
of the items in the analysis result list.
Are you seeing something different from the behavior
I've described?
My experience and information is that Soundtrack Pro only finds clipped samples. Have you been able to fix them as well?

Itunes showing all data as other and sync button greyed out

Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?

Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes.

Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..

Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..

well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

How to view "date from" and "date to"

Hi,
I have loaded EMP data. In the mapping "date from" and "date to" are visible. But these fields are not seen when I display the EMP data.Can someone please tell me how to view these fields?
Thanks,
Williams

I got your question . Please find my understandings .
In the transformation Please check weather routine or formula is written which is stopping the dats
to be updated to the target .
I mean data is there in the source but if its not updating to target it seems some rules have been set up in the transformation . Please check .
Assign marks is the best way to appreciate help

Merging Basic data View and Classification View in Material Master

Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela

Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT

Default view and date format for anonymous access in convergence calendar

Hi,
is there an option to configure default view and date format when user access to a calendar with anonymous access ?
Actually, date format is M/D and I want D/M.
And the default view is monthly, and I would like to set to 7 days view.
Thx for your help
Regars,
JC

jchatriot wrote:
is there an option to configure default view and date format when user access to a calendar with anonymous access ?No. I've raise a new Request For Enhancement:
RFE #6961895 - "Provide configuration option and URL parameter to set Anonymous Calendar view and date format"
Regards,
Shane.

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on. My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use. I am on Facebook but have turned it off in notifications. Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs. So what the heck is going on?

Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Is there a way to manually custom-edit the "Date created" and "Date modified" attributes of files in Mac OS 10.6?

In "List View" in a Finder window, among the many column options are "Date created" and "Date modified." In "View Options" (command-J) for any folder, one can add these columns, along with the standard ones "Size," "Kind," "Label," etc.
A user can alter a file's name, and a file's "label" (i.e. its color). On the other hand, a user can NOT arbitrarily edit/alter a file's official "size" -- other than by physically altering the contents of the file itself, obviously.
But what about a file's "Date created" and "Date modified"? Can either of those be manually edited/changed, just as a file's name can be changed -- or is a file's creation-date an immutable attribute beyond the editorial reach of the user, just as a file's "size" is?
And yes, a person can "alter" a file's "Date modified" by simply modifying the file, which would change its "Date modified" to be the moment it was last altered (i.e. right now). But (and here's the key question) can a user somehow get inside a file's defining attributes and arbitrarily change a file's modification date to be at any desired point in the past that's AFTER its creation date and BEFORE the present moment? Or will so doing cause the operating system to blow a gasket?
If it is possible to arbitrarily manually alter a file's creation date or modification date, how would it be done (in 10.6)? And if it is NOT possible, then why not?

sanjempet --
Whew, that's a relief!
But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started!

Put, Get , Connection buttons greyed out

Hi All,
I am pretty new to Dreamweaver but not to web development. I
have set up and connected a few sites from my own PC. It all goes
just like it says in the manuals.
But I got called into a client site who have an existing site
set up in Dreamweaver. The DW person left and the current person
wanted some coaching. Well the Code, Split, Design views all came
up and we could edit just fine.
But over on the right, above the list of files, all the
buttons (put, get, connection etc.) were greyed out. At first I
assumed the FTP connection was not set up, but it was, because when
we saved files, they saved straight to the live site.
So I went over to look at Site / Manage Sites. The FTP
connection was listed, but many of the other options (all the
categories within Advanced) did not seem to be available. They were
not just grayed out - I could not even see the list of them.
I have been fiddling around at home on my own sites, trying
to figure out how to recreate this and I can't. I can figure out
how to put myself onto live updating (update to remote FTP on Save)
but I don't get the other buttons greyed out just because I am
working like this.
Any ideas? I'd like to be able to go back there, take them
off live updates and restore the buttons.
Thanks
Abigail

Unless one is working in ColdFusion, or has special
requirements, the FTP &
RDS server option should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C4F834C6.30E30D%[email protected]..
>A guess- they set this up as an "RDS" ftp site, and it is
editing the live
> files on the server.
>
> To make a regular ftp site connection, make a New site.
> If it's CS3 version, make sure you pick "site" and not
"RDS"
> Enter all the details, and make a "regular" ftp
connection, not an RDS
> connection.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

SQL DM - Data Transformation and Data Movement option ?

SQL DM - Data Transformation and Data Movement option ?
I am using SQL DM 3.0.0.665. I need your thoughts on following.
We find that Erwin introduced Data Transformation and Data Movement functionality to support ETL need. We were able to generate ETL spec using this feature.
Does SQL DM have any plan to introduce such features?
How do we use the current SQL DM to build ETL spec ?
Thanks in helping us out.

Hello,
I am currently experimenting with SQL Data Modeler to produce high level solution designs and ETL specifications.
Have not completed what I am doing but so far have come up with the following:
Current assumption I am working on:
All objects specified within the SQL Data Modeler will export to the Reporting Schema tables set up in an Oracle database. Once the data is within these tables then it will be a simple task to develop a SQL report to extract the data in any format required.
1) There is nothing in the physical (Relational) Model section that supports this
- though I have yet to fully use the Dimensional Modelling functionality which may have the mapping functionality required to specify an ETL
2) We need diagrams of the processes as well as the ETL mapping
- Process modelling is available in the Logical
- Reverse Engineer all Physical objects to become Logical object i.e. one Table to one Entity
- For each Entity set up an Information Structure
(Currently this can only be done in a convoluted method via creating a diagram, creating a Flow and editing the Flow then drilling down)
MESSAGE to SQL Data Modeler Support: Can things be set up so that Information Structures can be set up directly from the Browser, current method is a bit nonsensical
- You are now set up to use the Logical Process Modeling functionality to capture the ETL requirements
- Advise that you reference the training to understand what primitive, composite and transformation processes objects are
- Also, take the time to understand what an external agent object is
- Will assume you know what a Data Store is
Here is the standard I am heading towards that seems feasible, will need to run a proof of concept within the larger team to ensure it works though:
- A Logical is kept that is a one for one with the Physical
(The only reason for this is that there is no process modeling functionality for the Physical objects
MESSAGE to SQL Data Modeler Support: Can you duplicate the Process Modeling for the Logical to be available for the Physical objects too, would be a great help to specify ETL jobs.
- An External Agent is used to represent an external source e.g. Billing application
- A primitive process is used to represent the high Level design
- A composite process is used to specify processes which can be further broken down to ETL jobs
- A transformation process is used to represent an ETL job
Within a Transformation process you can specify the mapping from multiple sources to a target table
There are some negatives to this approach:
- You lose the physical schemas the tables are part of, though a naming convention will get round this
- You need to maintain a logical that is one for one with the physical, this is not a big overhead
However, as I have stated in my message to the SQL Data Modeler support team, would all be resolved if the Process Modeling functionality were also made available within the Physical objects environment.
Please note that we have not as yet adopted the above approach and are still assessing is SQL Data Modeler will meet this requirement to our satisfaction. The critical bit will be if the data exports to the Reporting Schema, if it does then we have plenty of SQL resource that can produce the reports required procided the data can be captured.
Hope that all helps.
Also, hope I have not missed the point of your email.
Kind regards,
Yusef

Tutorials for MVC, Data Controls, and Data Bindings

I am looking for some good tutorials on:
Model View Controller concept
Creating Data Controls from Java Beans
Creating and Using Data Bindings
We are using JDeveloper, but do not want to use ADF as we want more control than ADF offers.
Thanx
Pam

Just curious, what control do you need that ADF doesn't offer you?
If you use ADF, you don't have to use it for every page. You can bind some components on your page using adf directly to your adf data controls, and you can bind other components to your backing beans, and have full control. No reason to throw out adf if there are just a few cases where you need more control.
Btw, do you have a link to a page describing these non adf data controls and data bindings?

Difference between "Data replication", "Data Cloning", "Data duplication" and "Data Migration"

Hi Gurus,
Can anyone tell me the difference between "Data replication", "Data Cloning", "Data duplication" and "Data Migration". I have gone through Google but doesn't find any appropriate answer for that where I can find the difference.
It would be highly appreciated if you give me a link for all and give me some point out.
Thanks & Regards
Nimai Karmakar

Here is how I see the terms used and understood by most folks
"Data replication"
This is the keeping the same data in sync in 2 different databases. Replication is the process of keeping data in sync between 2 environments/databases and not limited to Oracle to Oracle, it could be Oracle to MySQL to be kept in sync, MySQL to Oracle, Oracle to SQL Server, SQL Server to Oracle. The purpose of keeping data in sync can vary, but that is basic description of what it is.
"Data Cloning"
Make a copy of the data/database from one database environment to another, like for example taking production database and cloning the database to a pre-production database/environment for testing. Coning term is used more when copying a database not just data, but the whole database so typically you hear the reference "Database Cloning", but data cloning is basically the making a copy of the data from one place to another. Sometimes Cloning and Duplicating are used in the same way by folks as the basic end result is the same you are making a copy of the data to someplace else.
"Data duplication"
This is typically term when duplicating the data from one environment to another for a particular purpose, a lot of folks use "Data/Database Cloning" and "Data Duplication" in the same context, meaning they use them to mean the same thing, but I see more difference in the terms so when they are different Data Duplication is done when combining 2 databases to 1 therefore you can not clone the 2 databases into one so this term would be used more in those circumstances.
"Data Migration"
Moving data from one location/database to another location database, for example moving from MySQL to Oracle you would do a data migration from MySQL to Oracle as you are moving the data from MySQL to Oracle and going to leave it in Oracle. You could also be migrating to from Oracle 10g environment to a new Oracle 11g environment, therefore "Migration" is typically used when referring to moving the data from one environment to another and the source and target are different in location, database vendor, database version.
These are very simple ways of looking at the terms from my experience on how they are used.

Data View and Data Source buttons Greyed out

Similar Messages

Maybe you are looking for