Data visible in 2D Array but not in connected Table Control

In the attached drawing, you see that I take the Table Control as an array, change elements using Replace Array Subset and then send the resultant array back to the Table Control.
I can see my data in "Output Array" and in a probe on that wire but my Table Control is blank.  The Table Control is 10 columns by 50 rows.
Can anyone tell me why there is no data getting to the Table Control?
Please don't ask me to post the VI because it is large, ungainly and not mine to post.
Solved!
Go to Solution.

I can't believe it.
I could not see the data because it was out-of-frame.  My Control Table was scrolled down to the bottom of a 30 row window and my data was in the first row only.

Similar Messages

  • Data Visible At Aggregated Level but not at Leaf Node Level in ASO

    Hi,
    I am facing an issue in Essbase Version 7. I have a BSO - ASO partition. I have 4 dimensions Customer, Accounts, Product and Time. When i try to view data across customer, time and accounts the data is visible at the leaf node level and the aggregated level. But when i include Customer in my analysis the data is visible at an aggregated level for the customer but not a the leaf node level. What could be the cause of this? I am not getting any errors during my data load in ASO as well as when i run the aggregation in ASO...
    Any inputs on this issue are highly appreciated....

    Without having complete information, I'll guess you are trying to look at the data in the BSO cube. I would look at the partition definition. One of two things is most likely happening
    1. You only have the partition defined to look at the top level of customers
    2. THe member names of lower levels of customers is not consistent betweent he two cubes and you don't map member names.
    You can prove that is it a partition definition problem by doing the same retrieves from your ASO cube. If you get back data you know it is a partition definition problem. If you don't get back the proper data you have different problems. One that would not seem logical unless you had odd formulas on your ASO cube.

  • Report visible for one user but not for other user

    Hi all,
    We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
    I need quick responses.
    Thanks in advance,
    Sananda

    Hi Sananda,
    Just assign the saem roles as the other user who can view ..
    You can inform the Auth/basis team and they shud be able to do this..
    The T Code is RSECADMIN>user  Tab>Assignment>user.Display and BView the roles here..
    or goto SU01 and check for the Roles Tab.....
    The New user must have the same roles as that of the other..
    Rgds
    SVU123
    Edited by: svu123 on Sep 22, 2010 7:14 AM

  • Adobe form-Able to post  data using Adobe Reader 9 but not with Adobe Proff

    Hello Guru's
    I am facing one problem with adobe forms.
    We have develoed a adobe form using adobe reader 9.
    Now when user are posting the purchase requistion using the form,they are able to post the data using
    Adobe Reader 9 but not with Adobe Reader professional.
    Can anyone please advice me what can be the problem here.

    Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

  • Data appears in the tree but not in the display

    Post Author: TheBig1980s
    CA Forum: General
    Hello:
    When I print data for one month, data appears in both the Preview tree and the Preview display.  When I print the data for another month, the data does show in the Preview tree but not in the Preview display.
    Forgetting the tables the report is pulling from, forgetting which month is which, etc., why (in any case) would Crystal show data in the Preview tree but not show that same data in the Preview display?  That makes no sense.  I wish I could just take my mouse and just drag the tree onto the displayu2026..
    I have nothing suppressed.  This is Crystal 9.
    Thanks!
    TheBig1980s

    Post Author: SKodidine
    CA Forum: General
    I encounter this in CR XI once in a while.  What I found from my research, if I have a group and then I have certain conditions to either display or eliminate the data selected for whatever reason then the group tree will show the group and since the data is eliminated by either the select criteria or another way there is no data displayed.
    Try this.  In the second month where you see the data in the tree but on the report, see if you can narrow it down further by day and see if you can find the reason why.

  • When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year.  Why is this and how can I look up the year?

    When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year.  Why is this and how can I look up the year? 

    Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
    To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

  • Pictures I've taken are visible on my iPhone but not my camera roll. has happened twice.

    Pictures I've taken are visible on my iPhone but not my camera roll. This has happened twice. On a set of pictures taken 11/2/13 and today 11/5/13. Is there a solution for this. This is unacceptable. Now it's not showing any new pictures taken at all.

    SisterDee wrote:
    I'm with you. It doesn't make any sense to me either. However, when I view my pictures as a collection and select it - nothing is there. It is a clear picture.
    The problem is that what you originally said, "Pictures I've taken are visible on my iPhone but not my camera roll" , has nothing to do with your actual problem. 
    Define "clear picture".  Do you mean blank image?  Are you saying there are no pictures to view, only blank screen where the picture should be? 
    If so, restore the iOS in iTunes:
    iTunes: Restoring iOS software

  • My iPhone 3G charges with a charger, but not when connected via USB to my computer and iTunes doesn't recognize it.

    Hello, my iPhone charges when I charge it with the wall plug but not when connected to a computer via USB and my iTunes doesn't recognize my iPhone either. iTunes recognizes my iPod and iPad just fine. I have been to Apple iPhone support page and I have restarted my iPhone, the computer, tried different USB ports, etc. I have also tried my iPhone on different macs even with different versions of iTunes and no luck. This all started when I was cleaning out some lint from the usb connector, could I have damaged some part of the docking connection? But why does it charge with a wall plug then?

    I fixed the problem. When I was trying to clean the connector of the iPhone I must have bent some pins. I have straightened them to the best of my ability and now it syncs. If your iPhone charges, but doesn't sync, most likely you have a similar problem, because the iPhone doesn't need all of its pins to charge, but it does need all of them to sync.

  • I plugged in USB cable but not showing connected status in my ipod 4th generation

    I plugged in USB cable but not showing connected status in my ipod 4th generation

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Vertical Scroll bar does not appear in table control

    Hi ,
    I have a table control with both vertical and horizontal scroll bars.
    The data which comes is always more than 50 and the visible line size is 8.The vertical scroll bar
    does not appear at times..but if i run the program again, it appears..
    Sometimes it appears and sometimes no vertical scroll bar comes thought the data is more than the visible lines.
    Any suggestions ? why is this happening?
    Regards,
    Sharadha

    You have inserted data in the internal table and not "informed" the table control
    In the PBO, use a statement like
    DESCRIBE TABLE <itab> LINES <control>-lines.
    Regards

  • Table type not defined for table control "T_CONTROL" (Custom table)

    Hi All,
    I m facing a problem in ITS mobile service.
    The Table control designed by me in R/3 (Module pool program) is
    not getting displayed in ITS mobile page.
    It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
    Can you please let me how this issue can be resolved.
    With Regards,
    Mahesh

    CONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
    try using this....
    Regards
    Vasu

  • Drive visible in Disk Utility but not Finder.  Why?

    I have a PowerMac G4 (mirrored drive doors) with 4 hard drives installed. 3 of the drives are set-up in a striped RAID array and the other one is my boot drive with two partitions. One one partition, I have OS X 10.3 and I can see the RAID drive fine. On the other partition, I fresh installed 10.4 but the drive does not appear on the desktop. Strangly, I can see the drive in Disk Utility and it shows me the mount point. I can even unmount and remount it but it still does not show up in the Finder. I had 10.4 server installed prior to the fresh 10.4 (not server) install and that showed it fine. I tried to see the drive in Terminal but also does not appear. Why does my drive appear in Disk Utility but not the Finder?

    BDAqua wrote:
    Yes, it needs the path to the drive...
    :-/ Yes, I got the command in completely with the path to the drive like it states in the other post. I have no idea why it didn't recognize the command as I'm not as familiar with UNIX/Linux commands as I'd like to be.
    Anyways... I found the cause of the problem (incase it happens to anyone else). Here's what happened:
    The ownership on the root of my RAID volume was set to be read/write for me (under my proper username) and no access for anyone else including Admin. When I installed a fresh OS, the default user was Admin (who had no access under the previous OS). If I would've taken the time to set-up my proper account (with the same owner name as my previous OS) then it would've been visible again but since I didn't see it under the default Admin account, I stopped there to troubleshoot. Another way to make it visible was just to change the access privileges from my previous OS to be read/write for other users (or at least Admin). I would think that checking the box for "Ignore ownership on this volume" would've remedied that but for whatever reason, it didn't.
    Thank you for all your help. I did learn a little even if it wasn't the direct solution. Now if only I could get Disk Utility to restore my old image without giving me crazy errors... But that's another issue altogether. ;-D

  • Data exists in DSO New table but not in Active table

    Guys,
    I am loading data from one DSO to another DSO, in my target DSO I have 6 fields which 2 of them are mapped in Transformation and remaining 4 will be populated by Start routine and End routines. Before Activating I am seeing all 6 fields got populated in New data table but after activating I am only seeing the 2 fields in Active data table but not those that are populated through Start and End rouitnes.
    I have only one Key in my DSO, am I missing something here?please let me know.
    Thanks,
    KK

    Hi,
    beside end routine, there will be one icon.
    click on that.
    you will see two options.
    select the option "populate values into fields with out active transformation rules"
    don't remember the words correctly but gives the same meaning...
    Activate the transformation.
    this will solve your problem
    Regards,
    Raghu
    Edited by: Raghu tej harish reddy on May 2, 2009 11:10 PM

  • Use cellular data for iTunes Match & Radio but not app Updates

    Is there any way to set an iOS device so that it will allow using cellular data for iTunes Match and iTunes Radio but not downloading app Updates. I want to be able to set my wife's phone so that the apps are automatically updated over Wifi but she can then use iTunes Match and iTunes Radio when she is out. She only uses those in limited capacity so I am not too worried about her using up her data plan with those. However, app Downloads seems to be quite large, and they happened a lot recently when they all updated for iOS8.
    Thanks,
    Tony

    No, but you could turn off Updates under Automatic Downloads in Settings>iTunes & App Store, then update them manually when you're connected to wifi.

  • Dates Appearing in Tabular Model but not appearing on Pivot table

    Hi all,
    I am using SSAS tabular Model 2012, in tabular model all dates are appearing correct in date column but not when i drag attribute to my pivot table it shows only one date. Does anyone has the solution of this issue.
    Regards,
    Piyush

    Hi Piyush0308,
    According to your description, you have date column displayed all dates correctly in Tabualr. When showing in a Excel Pivot table, it only get the first date. Right?
    In this scenario, firstly please check the source table data in database, then make sure the data type of this column is Date in Tabualr. In Excel, please make sure there's no aggregation setting on this field. As I tested in our local environment, it should
    display same thing in tabular.
    If the issue still persists, please share some information about your date table so that we have some deep analysis.
    Best Regards,
    Simon Hou
    TechNet Community Support

Maybe you are looking for