Data1.cab missing or corrupted

when i try to install jre 5 update 6 it comes up with data1.cab file is missing or corrupted. what to do to install java?

Go to this page http://java.sun.com/j2se/1.5.0/download.jsp
IMPORTANT: Read the Install Instructions for the JRE choice.
Select the Download JRE 5.0 Update 6 link. (JRE, not any of the others.). In the next page, select the OFFLINE install. Click the downloaded file and an installer will start. The downloaded file can be deleted when the install is complete, if you wish.

Similar Messages

I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?

I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?

It looks like the CD is damaged. You could try copying the entire CD on to your hard disk in a temporary folder and then launch the setup.exe file by double clicking on it.
Can you do this? Please post back.
Whether 5 can run in Windows 7 is something I don't know. You just have to try it.

Data1.cab missing when installing elements 12 from download

I though that i hadcessfully donloaded both the *.Z7 ffile and the *.exe file. It took quite some tim unpacking all the files but one thing i noticed that the numbers of cabinets don't make sense. It runs from 1 to 15 but data4.cab is not there. now that data4.cab i just the one the installer seems to miss. i didn't get any error message. perhapsd i will try unpacking them again/.

Hi Pat,
After that initial error, I moved the two downloaded files to a local disk (they were on an external disk before) then I ran the executable, now all files were correctly unpacked and installed. Just for information: I was not unpacking those files manually, the installer unpacks everything to a seperate folder only then can the installation beggin. It was during installation that the installer asked for DATA4.cab.
Regards,
Daniel Vanhoof

CS2-installing error "data1.cab" file corrupt

I have recently reformatted my C drive and reinstalling programs.
I tried to reinstall my CS2 Photoshop, but received error message that the "data1.cab" file was corrupt or missing. Could not install program.
I don't know how to fix. Could someone please help?
Thanks,
mmspry

from a disc? try to copy the photoshop folder from the disc to the desktop, then run setup from there. however, you might have a bad drive or a bad disc. if the setup from the desktop fails, try installing on another machine. if it still fails, the disc probably has a problem. if that works, maybe your drive needs replacing.

Acrobat 10 data1.cab corrupt

Adobe Acrobat ver. 10.0.3
Windows 7 Enterprise (64-bit) OS
English
I have been trying to update to Acrobat 10.1, but the update keeps failing with the following message:
Error 1334. The file 'ia32.ppi' cannot be installed because the file cannot be found in cabinet file 'PCW_CAB_ACRO1010'. This could indicate a network error, an error reading from the CD-ROM or a problem with this package.
I thought repairing the installation might help, but that also failed with a similar error:
Error 1334.The file 'zy______.pfm' cannot be installed because the file cannot be found in cabinet file 'Data 1.cab'. This could indicate a network error, an error reading from the CD-ROM or a problem with this package.
After seeing a similar question in http://forums.adobe.com/message/3740605, I tried to follow the instructions to create a new AIP by doing the following:
1. msiexec /a <path of AcroPro.msi for 10.0> TARGETDIR <path where you want to create AIP>
2. cd to the AIP folder
3. msiexec /a <AcroPro.msi> /p <path of .msp file (AcrobatUpd1010.msp)>
But at step #1, I get the following error message:
Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
What would be the best way to resolve this problem and apply the Acrobat 10.1 update?
Thanks for any help you can offer.
-David

Thanks for taking the time to reply.
I don't have Carbonite installed on my machine, so that isn't the cause of my particular issue.
I decided to try what seemed most straightforward: simply copying data1.cab from my Acrobat X installation media and replacing the file on my machine. This seems to have worked and enabled me to apply the 10.1 update without error.
I have no idea what could have caused data1.cab to become corrupt.

Data1.cab is corrupted

I cannot install lightroom as the data1.cab file is corrupted.
Can anyone tell me a way round this problem?
Dave

You can try solution 6 and 7 in Error 1311, 1335, or 2350 "Source file not found...data1.cab" when installing Adobe products | Windows. Those solutions are aimed at the Windows Installer Service as being a possible cause. I do think it is more likely that the data1.cab file is corrupted but they are still worthwhile steps to try.

JRE - Error 1330 (Invalid digital signature in data1.cab)installing1.6.0_13

I cannot install jre6 update 13. All attempts from using full offline download result in the following error message:
"Error 1330. A file that is required cannot be installed because the cabinet file C:........\Java\jre1.6.0_13\Data.cab has an invalid digital signature. This may indicate the file is corrupt."
It looks like there is a problem with the 1.6.0_13 consumer JRE offline installer once it was digitally signed. Is it possible the digital signature of the Data1.cab file was corrupted during extraction. I am wondering if Sun needs to rebundle this offline package again.
I have disabled virus checking, and whatever else I could think of!
System is Windows XP SP3.
Has anyone else experienced this problem, or have any suggestions?
Thanks,
Paul

Afternoon,
I have had this error on a hand full of WXP SP3 workstations running 1.6 update 16. I am not a smart person, but I do know how to search. I found a fix a tried on a similiar error.
On one of my problem children I did the following.
As Admin verify rpc service is started.
from a CMD prompt
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 slbcsp.dll
regsvr32 cryptdlg.dll
I believe the initpki.dll took a few to respond. After that I restarted and tried the install on the problem child again. Success. Since then I have been going back to my other problem children. I try the install without the fix and have not had a issue, YET, installing update 16. It's PFM.

Data1.cab is Corrupt

Trying to install Adobe 8.0 Professional. I get an error
message Data1.cab is corrupt or missing. Any clue on how to repair
this?

Direct Download Links for Adobe Software
Mylenium

Error while installing jdk1.5.07 on Windows 2000.(data1.cab file missing or

I am unable to install jdk1.5.0.07/jdk1.5.0.11and while Copying files this error is generated.
"Data1.cab file is missing or corrupt.". I have tried to download the same from Sun's download centre as offline installation.
Please suggest a solution.
Regards,
Neha Shrivastava

I have tried downloading it again and also used the installer which was successfully able to install on Windows XP.
Also, a few days back I was able to install jdk1.5.0.07 but then my system was attacked by some trojan and I had to format it. Since then I am unable to install it using the same exe.

Corrupt Data1.cab in Oracle Express 10g Universal for Windows

Hello Oracle Folks,
I downloaded several times Oracle Express 10g Universal for Windows (OracleXEUniv.exe) and tried to install it and I get every time the same error message: "Error 1335. The required file "Data1.cab" is corrupt and cannot be used ...". When I download the Western European Edition (OracleXE.exe) the installation works! I downloaded the file on different local disks to exclude the risk that my disk is damaged.
Can you please check if this download is sane!
Thanks and best regards Thomas Mayr

kalyat wrote:
Amazing reply Hans.
I have seen some arrogent smart mouth answers in my time. But this really takes the cake. Also judging from the icon you are some kind of employee of oracle. Wow! Now that shows respect for your users.
Sorry to disappoint you - I am not an employee of Oracle. Much of your rant is irrelevant.
I am simply a person who has volunteered enough time to provide over 8,000 repsonses in these forums and many more in other forums.
Many, many, many of the questions are pure repetition due to the extreme laziness, incompetence or inability to do basic thinking by the questioners. There are also a lot of questions by 'newbies' who have obviously made an attempt to research the problem.
My approach to answering questions is simple and two-fold:
- make the person angry enough, or aware ennough, that they will think a bit when asking the next question;
- if they ask a question intelligently (http://www.catb.org/~esr/faqs/smart-questions.html) I usually am convinced to help.
(And yes, I do take longer breaks when I find myself being frustrated enough to provide answers like the above.)
The stupid installation program for your stupid database was supposed to check the version of the Operating System. Anyway how does the operating system version matter if a cab file is corrupted? which was incidently packed in that stupid download link which you have happily given to all customers all this time. I was hoping to find that since you guys are too lazy to make the installation file properly you might have atleast bothered to put up a download link for that stupid Data1.cab. But nooo... The 'stupid installation program' is indeed that - a stupid installation program. It does a certain amount of checking, but definitely not enough. In that I do agree with you. It was also released too early - basrely understands how to spell Vista.
Also, there is an assumption by Oracle that the person downloading reads the documentation, especially the installation guide, that is available at the same location as the download. It is amazing and extremely disappointing to note how many people will not even attempt to look at the link.
The real sad part for me is that I frequently download software (and did again in this case) to verify that the user has a legitimate complaint. The 'data1.cab' that I received was not corrupt. Therefore I conclude the original poster made some huge assumption that is likely invalid. Now, I did install into an XP machine, and that could make a difference.
As for the 'you guys' statement - perhaps you should take that up with Oracle or an Oracle employee. Directing at me is an unsubstantiated assumption on your part. <g>
>
I wasted some time thinking I would check out the db for development, got the same error and after seeing your mealy mouthed response to that poor guy who was asking a valid question, I think I won't bother anymore. You see, there is this amazing thing called Linux and MySQL..
Yup. You could easily go there. Shows yet another assumption. (In fact, my company is centered around Linux and Oracle. And I have made a conscious decision, based on 3 decades of experience, to toss MySQL and stick with Oracle. And now that Sun, which owns MySQL, seems to be on the auction block, the future of MySQL is definitely up in the air.)
However, given how many assumptions you make and how valid they are, you may find it easier to stick with MySQL. Oracle Express edition potentially could save huge buckets of time and effort in the long run, but it does require reading, research and other skills to get up to speed.
Now, as to your problem
1) This is not the forum to discuss issues with installation. (If the problem is traced to the download source, then this is the right spot.)
2) There is a dedicated forum for Oracle Database 10g Release 2 Express Edition (Oracle Database Express Edition (XE)
3) You are absolutely correct that the installer should be smart enough to check the OS. It does not.
4) Since it does not, and since there are differences, knowing which version AND edition of Windows (or which Linux distro and release) is critical to troubleshooting.
Edited by: Hans Forbrich on Mar 21, 2009 4:32 PM

Error 1311, missing file data1.cab

I'm trying to install Acrobat XI but continue to get Error 1311. File data1.cab is missing, empty or something. I've tried download the program several times. Each appears to be a successful download but won't install. I've tried disabling my spyware but still get same error.

Error 1311, 1335, or 2350
Mylenium

Error 1311 - missing Data1.cab file

I have researched this problem and still need help because I think my problem is different. First off, here's what happened...
I purchased and legally own CS4 Master Collection. I had it installed on my desktop. I ended up uninstalling Adobe Acrobat 9 pro. A week after doing that I had to do a system restore to a restore point BEFORE I uninstalled it. So the program obviously showed up again but with the error. Because of the error I uninstalled CS4 completely, thinking I could reinstall it again. Well when I went to reinstall, it already said that Adobe Acrobat 9 was installed already so I wasn't able to select it again to reinstall. All of the other programs installed just fine. And then when I go to try repair Acrobat 9, it doesn't even show as being installed with the other CS4 collection. And when I double click to open it, it does open and when I go to repair it, it will open up an installation box saying it's going to install and then gives that error 1311 saying the Data1.cab file is missing. And it is missing.
So my question is, how do I uninstall it when there's no option to uninstall it. Or how do I get the needed Data1.cab back in place to see if it will indeed install properly?

Sorry about that, my desktop is running Windows Vista home edition.
I can uninstall every program through the add & remove programs feature except for Adobe Acrobat 9.0 pro. It doesn't show up as even being installed. Same with when I uninstalled and reinstalled it. It didn't give me the option to select it for installation.
Ok, I'm just uninstalling the programs again and will run the cleaner tool. Fingers crossed that it removes it!

PSE12 install: Error 1335, Data1.cab corrupt

PSE12 install: Error 1335, Data1.cab corrupt
Install from online purchase with download, all remedies are relevant to CD-ROM?!
How do I get my money back?

great. for others:
if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
and activate with your serial number.
if you have a download problem (eg, you see an error page or you are offered an incorrect version), you probably didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that (a restrictive browser setting) is another potential source of problems.

Trouble installing Elements 12, message "cabinet file Data1.cab corrupt"

What can be done to complete installation after receiving the corrupt file message?
[email protected]

Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows

Acrobat 8 Standard - Data1.cab Corrupt

I've been trying to get Acrobat 8 Standard installed on my Vista desktop. At first, I was having problem with the PDF writer print driver, but in trying to resolve that, I have developed another problem. I uninstalled Acrobat, and was trying to re-install it, but have had the installation interrupted each time I've tried, apparently because the Data1.cab is corrupt. I tried making a copy of the CD, but got the same results. I then tried copying the entire contents to my C: drive, then running the setup app, with the same results.
It's odd that I'm experiencing this problem now, since I had previously installed it on this desktop with mostly successful results (other than the print driver issue).
Can anyone offer any suggestions on how to resolve this issue?
Thanks,
Todd

Quick update on this. I tried once more to install Acrobat, and this time it seemed to work. The app itself seems to work ok, as far as I can tell, but I'm back to my original problem of the print driver not working. I have another posting for this problem, so I'll switch over to that posting.

Data1.cab missing or corrupted

Similar Messages

Maybe you are looking for