Database 11.1.0.6 and 11.2 version

Hi
I installed Oracle DB 11.1.0.6 in my machine. As this version does not support AL32UTF8 character set, i would like to uninstall this database and install Oracle DB 11.2 version to support AL32UTF8 character set.
So my question is is there any way to apply patch to support AL32UTF8 character set?? Else what happens if i uninstall 11.1 and install 11.2 version of db??
Thanks in Advance

Hi,
you were talking about character sets and upgrade however for me it looks just to be a normal upgrade. If your database is not very large then the easiest way is to make an export using expdp and reimporting it using impdp on a new database. Another approach is to upgrade the 11.1 to 11.2 database. For this and the other method consult the Oracle Upgrade Guide.
Regards,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Similar Messages

Database 'TEST' is already open and can only have one user at a time.

Hi all,
Could some help on this issue as per urgency!
Database 'TEST' is already open and can only have one user at a time.
I also tried this command but having the same error, please let me know how to troubleshoot this issue
Use Master
GO
Select * from master.sys.sysprocesses
Where spid > 50
And dbid=DB_ID (‘StuckDB’)) -- replace with your database name
Thanks

Hi Tony,
sorry got the same error again, it can't allow me sp_who2 as well
I tried above command got the following error
Changes
to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1,

MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers

I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem. I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all. Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood.
Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer. This also affected attempts to repair MAX.
All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem. I have now lost 2 whole days and I am getting desperate for a fix. Surely this cannot be the only case of this in the whole world.
Mike
CLD & Alliance Member, UK
Solved!
Go to Solution.
Attachments:
MAX problems.jpg ‏218 KB
NI mDNS errors.jpg ‏102 KB
MAX Devices.jpg ‏83 KB

Hi Dr.M
In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
I know you have been through a couple of these steps , but there may be some related links that could help as well.
http://digital.ni.com/public.nsf/allkb/B9107A7F281F9B408625720B0078E5A8?OpenDocument
As for your installation errors:
This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it. This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
-To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes. In the window that opens, find the service that the error message references. It will usually have a status of "Stopping."
-Double-click on the service to open the service's properties window as seen below.
-Try clicking Stop to stop the service. If this does not stop the service, set the service's type to Manualand restart the computer. It is safe to set the service to Manual because it will be started manually if it needs to run. After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland

Database - information lost after saving and closing.

I have a very simple database. Two text fields and a date field. There are 146 records.
Each text field occasionally contains a lot of characters (isn't 255 the max.?)
If a create another record, put in a date and some text in each text field, then save, close, and reopen the file, the new text is missing from the first text field but the date and other text is intact.
I had this problem two weeks ago. As a work-around, I created another matching database from scratch, exported the records from the corrupt file, and then imported to the new file. The new file functioned well until today.
Any ideas?
Greg

Greg Beil wrote:
Each text field occasionally contains a lot of characters (isn't 255 the max.?)
No, it's 1004 characters per field.
If a create another record, put in a date and some text in each text field, then save, close, and reopen the file, the new text is missing from the first text field but the date and other text is intact.
No idea about this behaviour which I never saw.
May you send the file to my mailbox ?
Click my blue name to get my address.
Yvan KOENIG (VALLAURIS, France) jeudi 4 mars 2010 06:48:30

Exchange 2010 DAG netowrk replications issues - Causing database copies to be disconnected and resynchronizing.

My
environment is as follows.<o:p></o:p>
We have 3 exchange 2010 servers.<o:p></o:p>
EX1, EX2, DREX1. All servers are exchange 2010 14.2 build 247.5<o:p></o:p>
EX1 and EX2 have two nics, one LAN and one for BACKUP <o:p></o:p>
The dag is configured to to communicate to all three.<o:p></o:p>
The IP for EX1 is 192.168.100.51 - LAN, switch A; 160.100.3.51 - BACKUP, switch B<o:p></o:p>
The IP for EX2 is 192.168.100.52 - LAN, switch A; 160.100.3.52 - BACKUP, switch B<o:p></o:p>
DREX1 is located in another network. It is in another building connected via vpn. The ip
for DREX1 is 192.170.100.51. There is no BACKUP network for this server<o:p></o:p>
(These are not the actual address, but the concept is similar)<o:p></o:p>
The dag network configuration is as follows.<o:p></o:p>
DAGNetworkDR has a subnet of 192.170.100.0/24; Network Interface of 192.170.100.51<o:p></o:p>
DAGNetwork01 (LAN) has a subnet of 192.168.100.0/24; Network Interfaces of 192.168.100.51
and 192.168.100.52<o:p></o:p>
DAGNetwork02 (BACKUP) has a subnet of 160.100.3.0/24; Network Interfaces of
160.100.3.51 and 160.100.3.52<o:p></o:p>
Last Friday, 3/7/14 something happened.<o:p></o:p>
To lead up to that, I noticed the issue because we have DPM 2010 making 15minute express
full backups of our exchange databases when I reviewed the backup jobs, the
exchange database backups using dpm2010 failed all weekend long starting at
11:00pm that Friday.<o:p></o:p>
The issue that occurred was that the database copies went to a status of Disconnected and
Resynchronizing, and after about 30 seconds, the status would show
Resynchronizing.<o:p></o:p>
All attempts to resolve this with the research methods failed. Deleting the
logs and reseeding failed, suspending, then rebuilding failed.<o:p></o:p>
Creating a new database worked, creating a database copy worked, but seeding the copy
failed. All with the same pattern, a status of Disconnected and
Resynchronizing, and after about 30 seconds, and the status would show
Resynchronizing.<o:p></o:p>
The database was mounted on EX2, and seeding to EX1
DREX1 has no issues.<o:p></o:p>
All the DAG networks were in a good status, all Green and all up. I could ping from
EX1 to EX2 and from EX2 to EX1 on both networks fine.<o:p></o:p>
In the middle of the week, about 3/12/14, we resolved the issue. We rebooted EX1, no
fix, but after rebooting EX2, it all resolved. It did a fail over to DREX1. I think it failed to do the failover to EX1. However, when it came back up, it was happy, it was reseeding slowly. After about an hour and a half, it
was all healthy.<o:p></o:p>
We thought it was all good EXCEPT, on Friday night at 11:00pmish on 3/14/14, the same
issue occurred; a status of Disconnected and Resynchronizing, and after about
30 seconds, the status would show Resynchronizing.<o:p></o:p>
The database was mounted on EX2 and seeding to EX1 again. I did not notice the
issue until I performed my review of the backup jobs again on Monday.<o:p></o:p>
Late Monday morning, my boss and I were looking at more articles, but all the same results,
delete the database copy and reseed. Which we knew would not work.<o:p></o:p>
I mentioned that it was strange because the networks were all up. What made us try the next
scenarios was just "luck" I guess. I made a statement about not remembering
which networks DAG replication took place over. Again, we have a LAN and
a BACKUP network. Bother were listed to use replication, so we decided to
disable replication over the BACKUP network in the EMC. Immediately, the
database copies switch to healthy and started seeding.<o:p></o:p>
Later that evening I enabled replication over the BACKUP network and it failed again with
a status of Disconnected and Resynchronizing, and after about 30 seconds, the
status would show Resynchronizing. I disabled the replication over the
BACKUP network and the database copy went back to healthy<o:p></o:p>
The last round of windows updates were pushed to these boxes the Friday before the
issues began, 2/28/14. I don't believe the updates to be the issue. <o:p></o:p>
Can anyone make any suggestions as to where to look? It worked with the BACKUP
network enabled to so long that is eluding me as to why the issues would start
all of a sudden. I am also confident that the switch configuration for the
BACKUP network has not been changed at all in at least 2-3 months. I am
still open to look at the config. Please help if you can.<o:p></o:p>
<o:p></o:p>
Lastly, this is more of a monitoring thing, if anyone can suggest a good way to monitor
the database copies so that I can be alerted when the status changes. We
use WhatsUpGold 16.2 to monitor the devices. <o:p></o:p>
Thanks for any future assistance.<o:p></o:p>
Ian
Ian

You don't have to enable the Replication on Backup Network.
You should collapse your DAG network.
http://blogs.technet.com/b/timmcmic/archive/2011/09/26/exchange-2010-collapsing-dag-networks.aspx
http://blogs.technet.com/b/samdrey/archive/2012/12/04/exchange-2010-dag-collapse-the-mapi-networks-in-a-dag.aspx
Post the result of Below command:
Get-DatabaseAvailabilityGroupNetwork
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
 LinkedIn:
 Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Database Toolkit Sub query Syntax and file path expectation question.

I need some assistance from those of you smarter than I.
I have two database files (not two tables in the same database file) one represents information delivered from an external interface, and the other is used by the internal interface associated with the processing half of my application. Data is received (i.e. fields are populated) from the external interface to one database file and that data is then copied to another database file where the information will be processed by the internal interface. This is being done because I am worried about file access issues that might occur if two different interfaces (external & internal) try to access the same file at the same time (without dealing with semaphores). I am not too worried about the sanctity of the data since each record supplied from the external interface should not effect any of the data being used by the internal interface. So the first question is , am I being to primitive in my thinking assuming that I would run into file access issues if I were to just use two tables in the same database file for the same purpose ?
My second question is related to my current implementation where I have two separate database files representing the external and internal interface data. Currently when a new set of data is entered into the External Interface Database file, an alert is issued, and another task copies the data from that file into Internal Interface Database, then the data is deleted from the External Interface Database file. My question is related to the syntax that I am using to provide the described functionality. I am currently using a INSERT with a subquery to the External Interface Database file i.e. INSERT INTO InternalDB FROM ExternalDB.ExternalTable WHERE Order = '06306049'; .
My question is when I run this query with both database files in same directory I get an error stating that the ODBC driver can not find the ExternalDB.ExternalTable in the Parent Directory of the subdirectory where the files are actually located. The system DSN is set up correctly for the ExternalDB, and if I move it to the parent directory the query works correctly, my question is why would I have to put the two database files in seperate directories for this to work and is there a way to avoid this ?
Thanks..
Brad W

Thanks for responding Brian -
The message I get is Error Code -2147467259
Conn Execute.vi->InsertIntoFrom.vi<ERR>Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\Project\APDSS\DataBase\ExternalInterface.mdb'. in Conn Execute.vi->InsertIntoFrom.vi
When my query looks like
INSERT INTO InternalInterface SELECT Field1, Field2 FROM ExternalInterface.ExternalTable WHERE Id = '065649-101-750';

Database replication between Oracle RAC and Oracle Standalone DB

Hi,
We have currently 4 node RAC environment and Oracle RAC implementation with 4 Oracle instances. We want to move the one instance and make it Standalone with Oracle database due to availability issue. Thus we will remain with 3 nodes on the RAC database and one Standalone database. We want to implement Oracle replication on this solution, where partial database of RAC environment needs to be replicated to Standalone node.
We will have Oracle 9i database server for both RAC and Standalone machine.
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?
2. Is it feasible to sychronize around 25GB data between servers?
3. What can be estimated time for refresh or Synchronization?
Thanks in advance for help.

The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.
Please let me know if we need to look for some other methods of replication also.

Database replication between Oracle RAC and Oracle Standalone DB in 9i

Hi,
We have currently 4 node RAC environment and Oracle RAC implementation with 4 Oracle instances. We want to move the one instance and make it Standalone with Oracle database due to availability issue. Thus we will remain with 3 nodes on the RAC database and one Standalone database. We want to implement Oracle replication on this solution, where partial database of RAC environment needs to be replicated to Standalone node.
We will have Oracle 9i database server for both RAC and Standalone machine.
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?
2. Is it feasible to sychronize around 25GB data between servers?
3. What can be estimated time for refresh or Synchronization?
The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.
Please let me know if we need to look for some other methods of replication also.
Thanks in advance for help.

ManojMac wrote:
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?Streams is another option
2. Is it feasible to sychronize around 25GB data between servers?Sure. Depending on the rate of change, your latency requirements, whether the standalone database has the horsepower to apply all the changes generated by to other three nodes, etc.
3. What can be estimated time for refresh or Synchronization?Depends on the architecture, the network connection, whether you are doing incremental refreshes, etc. And it depends on what time you're measuring-- you might be measuring the latency between the RAC cluster and the standalone database, you might be measuring the time it takes to incrementally refresh a single materailized view when there have been no changes, you might be measuring the time it takes to do a complete refresh of an entire refresh group, pulling 25 GB of data over the network.
The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.DataGuard is not an option if you only want to replicate a subset of the data. The two realistic options are materialized views and Streams. Are you anticipating that you will be making changes on both nodes? If not, you can use simple materialized views rather than multi-master replication.
Since 9.2 is not longer covered by Premier Support, are you planning to upgrade to a supported version in the near future? In particular, Streams works a lot better in later versions of the database.
Justin

How to copy a database with all the objects and relationship but with no data

Hello Experts
I am here for your advise as usual, I want to create a copy of my current database from an existing one on SQL Server 2008r2 Standard Edition, here is what I need, I want all the objects including any relationship between the objects and I do
not need any data. I have some idea for using the general script in SSMS, but I still need you expertise advise please, thank you kindly for your help.
Regards

One option is to run BACKUP/RESTORE, once you have restored you run:
SELECT 'ALTER TABLE ' + quotename(s.name) + '.' + quotename(o.name) +
   ' DISABLE TRIGGER ALL '
FROM   sys.schemas s
JOIN   sys.objects o ON o.schema_id = s.schema_id
WHERE o.type = 'U'
AND EXISTS (SELECT *
   FROM   sys.triggers tr
   WHERE tr.parent_id = o.object_id)
Copy result and paste into a query window do to run. Next:
SELECT 'DELETE ' + quotename(s.name) + '.' + quotename(o.name)
FROM   sys.schemas s
JOIN   sys.objects o ON o.schema_id = s.schema_id
WHERE o.type = 'U'
Run this result until you don't get any more errors.
Run the first query again, but change DISABLE to ENABLE.
This is more long-winding than scripting, particularly if you have lots of data. But you know that you will not make any changes whatsoever to the schema.
The scripting in SSMS generally does it right, I believe, but some items are not scripted by default. If you run BACKUP/RESTORE, you know that you get a faithful copy.
Of course, the best way is to keep your code under version control and take the version control system as your ultimate truth.
Erland Sommarskog, SQL Server MVP, [email protected]

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Database refresh from cold backup and hotbackup.

How can we perform Database refresh from cold backup and hotbackup?

OracleM wrote:
How can we perform Database refresh from cold backup and hotbackup?I understand that you have Cold/hot backup and you need recover(refresh) this backup?If yes then restore cold/hot backup and
sqlplus "/as sysdba"
startup mount;
recover database using backup controlfile unil cancel;
/*then apply all available archive logs*/
alter database open resetlogs;

Drop database 8.1.7.0 and then import

Hi,
We are having Oracle database 8.1.7.0
Now, i have to drop the whole database and then import the whole database through import utility to recover the database.
Export .dmp file is available as backup for the whole database.
what are the steps for it ???
or do provide the good link to refer the topic.
With Regards

Hi..
Export dump can't be used to recover the database. It will provide you the data up till when it was taken. Suppose the export dump is of one day back , so you will get theconsistent data till 1 day back. Once, imported you can't perform any sort of recovery on it.
CAs you have dropped the whole database , create a new database, create all the tablespace and the users similar to the one that were previously in the old database and then use the imp utilit with fromuser touser parameters or full=y parameter.
link: [http://www.cs.umbc.edu/help/oracle8/server.815/a67792/ch02.htm#16959]
HTH
Anand
Edited by: Anand... on Nov 12, 2008 10:25 AM

Call the database table on commit operation and fetch the rows

Hi
I am new to Bpel. I have a task to call the database table on commit operation and fetch the rows and call a webservice iteratively for fetching the data into a file?
Can anybody help me on this
Thanks and regards
Richa

HI,
update ZYBKP set MATNR = zcore_2-ZDUMMY where matnr = zcore_2-ZDUMMY.
update ZY310 set MATNR = zcore_2-ZDUMMY where matnr = zcore_2-ZDUMMY.
update ZYBCS_LOT set MATNR = zcore_2-ZDUMMY where matnr = zcore_2-ZDUMMY.
YOU ARE COMPARING SAME MATERIAL AND UPDATING WITH THE SAME.. AND ALSO ZCORE_2 IS A DATABASE TABLE AND MAY NOT CONTAIN ANY VALUE AT THAT POINT...
in these statments you say that
update table set matnr = 'MATNR' WHERE MATNR = 'MATNR'.
EVEN THOUGH THIS STATMENT IS EXECUTED THERE WILL NOT BE ANY CHANGE IN THE TABLE...
Thanks,
Mahesh

What type of database operations effectd with Unicode and non unic

Hi Friends,
I want to know what type of database operations effects with Unicode and non Unicode Programing .
Thanks,
Ravi Kumar Mukkera

Hi ,
Check these links .
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtoot/docs/library/uuid/ff99cb90-0201-0010-e389

Elements 11 vs 13: how can I add a new place tag to my PSE13 database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.

HI,
I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

Database 11.1.0.6 and 11.2 version

Similar Messages

Maybe you are looking for