Database - 9i - password recovery

Hi, After the installation of Oracle 9i, i set the passwords for accounts SYS and SYSTEM which i couldn't guess now. Is there a tool/script to recover the set passwords? or can i find any notepad files where the passwords are written?
Help please...

There is no way to recover the passwords, at least not without running a password cracker.
Assuming you can log in to the operating system as the Oracle user (Unix) or as a user in the ORA_DBA group (Windows), however, you should be able to
sqlplus / as sysdbato get in to the database. Once in, you can change the passwords for those accounts.
Justin

Similar Messages

Password Recovery SRW Switch problem - SRW224G4P

Hi,
i have a problem with an SRW224G4P.
I have lost my admin password. And yes i have read the "Linksys SRW series Switch Password Recovery Procedure".
My problem is that the message "Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom." don't appear.
So what can i do?
Thanks for your help.

After many reboots, many hours and several terminal software, i get never a message like "Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom."
Below an Log-File with all Bytes coming from the switch after reboot till then Logon-Screen appears.
So what can i do????? Any idea ??
Thanks for your help.
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
Loading Runtime Image File : SRW224G4P_SRW248G4P_image.bix
Runtime 1.0.2
Pass
root init done
Set Transition mode ...
[get stackingMac done ret_val] = 1
Assigned Unit ID:[1]
stacking DB: unit = 0, module type = 0
Finish Set Transition mode ...
Enter Transition mode ...
Finish Transition mode ...
Enter Master mode ...
Load certificate files : Starting
Load certificate files : Finished
Finish Master mode ...
Performing startup provision ...
CLI enter main (PROVISION)
Press [P] to print out the detail provision message
!<stackingDB>00</stackingDB>
!<stackingMac>01_00-1c-10-ee-ac-fc_00</stackingMac>
phymap 00-1c-10-ee-ac-fc
hostname SRW224G4P_01
SNTP server 192.168.1.1 0.0.0.0 0.0.0.0
SNTP client
clock timezone UTC hours 1 minute 0 after-UTC
^
Invalid input detected at '^' marker.
SNMP-server location [cleaned]
SNMP-server contact [cleaned]
clock timezone-predefined GMT+0100-Amsterdam,Berlin,Bern,Rome,Stockholm,Vienna
clock summer-time predefined EUROPE
^
Invalid input detected at '^' marker.
power mainpower maximum allocation 180 unit 1
snmp-server community public ro
snmp-server community private rw
username admin access-level 15
username admin password 7 1fe56bbd74eacf7[cleaned]
enable password level 15 7 1b3231655cebb7[cleaned]
VLAN database
VLAN 1 name DefaultVlan media ethernet state active
spanning-tree MST configuration
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
![REDUCED] interface ethernet 1/24
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/25
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/26
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/27
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/28
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface VLAN 1
IP address 192.168.1.111 255.255.255.0
no ip name-server auto
no IP HTTP server
ip dhcp hostname SRW224G4P_01
line console
silent-time 0
line VTY
end
Notify provision complete
CLI provision has been completed
Provision Complete ...
Finish Provision Complete ...
[get stackingMac done ret_val] = 1
XFER: End of config sync.
[0m[0m[24;0H
Please press <Enter> to start Menu session!

Cisco ACS 4.x Password Recovery

I inherited a ACS server, but I don't have the admin password. Does anyone know of a password recovery technique ?

If it is running acs ver 4.0 on windows, then it is not possible. With ACS v4.0 all the configurations have been shifted from registry to a database file thus increasing the security in ACS. So as of now there is no way to recover the lost Admin password in ACS v4.0, cause no setting is in registry, all settings are in SQL database.
So need to reimage it ...
If it is acs windows 3.3.4 or below then you need to make registry change,
login to ACS machine as administrator..
Go to start ===> run ===> regedit
Click on HKEYLOCAL machine ===> software ===> cisco
===>CiscoAAAv3.2===>CSAdmin===> and delete all administrative users defined by
right clicking into the administraor folder.
Now login locally to ACS and it should not prompt you for password.
For a best practice make sure that you have Allow automatic login is checked
This will not prompt you for password if you are logging in locally from ACS mahcine.
If it is appliance then you need to use recovery cd to reset admin password.
Regards,
~JG
Do rate helpful posts

UCSM Password Recovery

Came into a situation where it is needed to recover a lost admin password for the fabric interconnects. Because the password is lost, we are unable to clean shutdown any of the blades and such. Not an ideal situation, but it's what I have to deal with.
I've read through the CLI guide and I'm familiar with the process to recover a password and having to reboot both fabric interconnects essentially bringing down any connectivity, but what exactly are the effects going to be?
Obviously upstream network connectivity will be lost so the VM hosts and VMs living inside the B-Series will be isolated, but will the IOMs/blades do anything crazy because they lost connectivity to the fabric? I realiz that since the FI's go down the storage paths will be lost. Anything else I should worry about?

Hi,
I have done just few of these but normally you have to delete the database to be prompted to configure the fabric again, this might mean to delete Service Profiles and other configurations.
Here is a great post from a colleage that can help you do the recovery:
http://jeffsaidso.com/2011/10/password-recovery-in-cisco-ucs/
Maybe someone else in this forum can provide another way to do it without losing everything, or you can also open a TAC case.
Rate All helpful answers.
-Kenny

Blackberry ID - forgot password, forgot password recovery info, exceeded login attempts, why can't BB send me email to reset password.

THE ISSUES ARE:
1. FORGOT PASSWORD
2. FORGOT PASSWORD RECOVERY INFO
3. EXCEEDED ATTEMPTS TO LOGIN
I HAVE READ OTHER PEOPLES FORUM PROBLEMS THAT ARE THE SAME. WHEN I FOLLOWED LINKS THAT SUPPORT GAVE THERE IS NO SOLUTION TO ACTUALLY FIX THE PROBLEM.
What I need is simply this: Blackberry to send me a RESET PASSWORD link to the email I have registered with Blackberry WITHOUT HAVING TO PROVIDE PASSWORD RECOVERY INFO. This will enable me to bypass unknown recovery password info and access my Blackberry ID account.
Why haven't I been able to find a solution to fix the problem?
BECAUSE IT DOESN'T APPEAR TO EXIST........ ANYWHERE..... EVEN ON YOUTUBE BLACKBERRY ARE RUNNING AN OUT OF DATE SOLUTION CENTRE.
When looked online to Blackberry youtube video it shows a solution that doesn't exist! WHY? BECAUSE IT WAS UPLOADED IN 2011. DUH. http://www.youtube.com/watch?v=lvdRb4qNG1M
If I can't remember my password or recovery password info there is NO other option available that will send me a reset password via email so I can keep my current BB ID.
KB34776 - does not apply because you HAVE TO BE ABLE TO REMEMBER YOUR RECOVERY PASSWORD!
CHECKED THIS OUT...
Workaround
If the BlackBerry ID password has been forgotten but the answer to the password recovery question is known, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
If the BlackBerry smartphone user knows the email address used for the BlackBerry ID login but is unable to remember the associated password then it is possible to reset the password using the steps below:
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.
To see if a BlackBerry ID account is confirmed, log in to the BlackBerry ID account, select Account Details and locate the Email Status field.  For instructions on confirming the BlackBerry ID account follow KB34137.
Browse to the following URL using a desktop browser, the BlackBerry Browser on the BlackBerry smartphone, or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will be displayed A password reset email has been sent to [email protected], at which point, a reset email will be delivered to the associated email address inbox.
Log in to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the smartphone, or the Browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected]. If the email is not found in the inbox, check the mailbox's Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
If the BlackBerry smartphone user does not know the email or password that was used for the BlackBerry ID, the BlackBerry ID will be locked out after 10 unsuccessful login attempts. See KB24157 for BlackBerry ID lockout behavior.
THEN CHECKED KB24157......
Overview
BlackBerry ID is the master key to BlackBerry smartphone products, sites, services and applications, including BlackBerry Protect and the BlackBerry App World storefront.
To prevent unauthorized access to the account, the BlackBerry ID will become locked out after a number of failed attempts. See the information below for an outline on the expected behavior:
Local Authentication Lockout
On BlackBerry PlayBook and BlackBerry smartphones if the user enters their BBID password incorrectly 10 times on the BBID sign in screen, verify password screen, or BBID Edit screens, they are LOCKED OUT of all the following functions on that BlackBerry device for 15 minutes:
Authenticating with their BlackBerry ID on the sign in screen
Authenticating with their BlackBerry ID on the verify password screen
Authenticating with their BlackBerry ID on the BBID edit screens
Note: The user can still log in on the web or any other devices associated with their BlackBerry ID. They are only locked out on the device where the 10 incorrect attempts occurred. On the locked out device, after 15 minutes, they get 1 try to provide the correct password on the sign in and/or verify password screens. If they fail to enter the correct password, they are locked out for an additional 15 minutes on that device.
Account Server Lockout
Users have total of 10 attempts to enter their password correctly against the BlackBerry ID Account Server.
The scenarios that increment the Account Server lockout counter are as follows:
Providing an incorrect password anywhere on the BlackBerry ID web portal (blackberry.com/blackberryid)
Providing an incorrect password within the BlackBerry ID Edit feature on any BlackBerry device or BlackBerry PlayBook
Note: if a user provides an incorrect password 5 times on the BlackBerry ID web portal (blackberry.com/blackberryid), and then 5 more times on the BlackBerry ID Edit feature on their BlackBerry PlayBook, the cumulative number of failed attempts is 10. Once the user has made 10 incorrect attempts to provide their password against the Account Server, they are locked out of the Account Server PERMANENTLY until they reset their password.
See KB26361 for information to reset a BlackBerry ID password
Note: The Account Server Lockout does NOT prevent the user from local authenticating on devices (the user can still authenticate on the sign in and verify password screens on their BlackBerry devices).
Forgot Password Lockout
If the user answers their Security Question incorrectly 10 times, they are locked out for 15 minutes of Forgot Password functionality on all interfaces such as:
BlackBerry website (blackberry.com/blackberryid)
BlackBerry PlayBook
BlackBerry smartphone
Note: After 15 minutes, they get 1 try, and if they fail to answer the question correctly, they are locked out for an additional 15 minutes.
THAT DIDN'T WORK SO NOW ITS BACK TO..... KB26361
Overview
To change the BlackBerry ID password, complete the steps below for the specific device:
From the BlackBerry 10 smartphone:
Swipe down from the top bezel on the home screen and select Settings.
Scroll down and select BlackBerry ID.
Select Change Password.
Enter the current password in the Current BlackBerry ID Password field.
Enter the new password in the New BlackBerry ID Password and Confirm New Passwordfields.
Select Submit to complete the password change.
To confirm the change You have changed your password will be displayed.
Also, if the BlackBerry ID password has been forgotten, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
Note: When using the recovery question password reset method, the generated email will be delivered to the BlackBerry 10 smartphone if the BlackBerry ID email address has been setup via Settings >Accounts
From a computer:
Visit http://www.bbid.com/ from a PC or BlackBerry smartphone browser.
Click Log in.
Enter the BlackBerry ID Username (email address) and password, then click Sign In.
Click Account Details.
Next to Password, click Edit.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Save.
Click Done to exit from the BlackBerry ID account information screens.
From the BlackBerry smartphone running BlackBerry 6:
Navigate to Options > Third Party Applications > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK.
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry smartphone running BlackBerry 7:
Navigate to Options > Device > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK .
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry Playbook tablet:
Navigate to the Options icon.
Select BlackBerry ID.
Click on the Edit button next to Change Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Submit.
A confirmation message will display You have changed your password.
Click OK.
If the password for a BlackBerry ID account has been forgotten and the login is unsuccessful, use the following process to reset the password.
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.  To see if a BlackBerry ID account is confirmed, login to the BlackBerry ID account, select Account Details and locate the Email Status field.  For instructions on confirming the BlackBerry ID account follow  KB34137.
To generate a password reset email, complete the following:
Browse to the following URL using a desktop browser, the Browser on the BlackBerry smartphone or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK. (Answering the recovery question is only required if the BlackBerry ID account is not confirmed)
A confirmation message will be displayed A password reset email has been sent to [email protected] , at which point, a reset email will be delivered to the associated email address inbox.
Login to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the BlackBerry smartphone or the browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected] If the email is not found in the inbox, check the Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
Note: If the BlackBerry ID email address is a BlackBerry mail address (e.g. <username>@tmo.blackberry.net), the BlackBerry ID password reset email will not be received on the BlackBerry smartphone. Since the BlackBerry mail address is not accessible from a computer, the steps outlined in KB28111 will need to be performed.
IT ALL LEADS BACK TO THE SAME UNHELPFUL NON-SOLUTION OF USE THE PASSWORD RECOVERY QUESTION....
Can the tech department of Blackberry please sort out this ridiculous unhelpful system by sending customers a direct email if password is forgotten so they can reset without having to go through the above without finding a solution.
THANK YOU.

Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
That said, it sounds like you have exhausted all of the automatic recovery methods...but just in case, please see this "sticky" post for helpful information concerning your BBID situation:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
Hopefully, this information will be of use to you.
But do please keep in mind that security is a 2-way street...the human element play an equal part in that security, and you have failed at that in this situation, yet desire for the automated methods to still recover for you. Such just isn't possible, because your failure has exceeded the capabilities of the automated methods.
Hence, you likely need human intervention from an actual BB representative, which is not available in this forum (as discussed in the first link I gave you above). But, the methods to attempt to seek human intervention are posted within the 2nd link I gave you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

My safari keeps crashing because of a bat password recovery plug in. What do I do to fix it?

My safari keeps crashing on me, and when it does it always says it was because of some Bat! Password Recovery Plugin. How can I fix this and stop t from happening?

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update (if Java is already installed) or the Flashback malware removal tool (if Java is not installed under Lion), as well as any other available updates. Installing either of those items should clear the infection in most cases. No other action is required on your part. You must update to the latest version of Mac OS X 10.6 or 10.7 before you can install the Java update.
Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Do this after you’ve secured your system, not before.

How do i bypass the windows password without password recovery disk

My sister has passed away & Ive been copying her pictures off of her laptop for the family & I havent finished. It logged off last night & now its asking for password & no one knows the password.. Im almost positive there is a way to go around this password but I cant seem to figure it out on my own! Please Help ASAP THANX

Here are some common methods.
 
Method 1: Reset Windows 7, Vista, XP Password Via Another Administrator Account
 
If you have another user account with admin privileges, including built-in accounts in Windows 7/Vista/XP, you can easily bypass other accounts' password using Lusrmgr.msc and Command Line.
 
1. Log on Windows 7/Vista/XP with your administrator account. Click on Start, type lusrmgr.msc in the Search box(Win7/Vista) or Run box(Win7/Vista/XP) and click OK.
2. When the Local users and Groups dialog appears, open the Users folder. Right-click your user account and select "set password", type a new password and click OK.
 
Method 2: Reset WIndows 7/Vista/XP password with Windows password reset disk
Here is the steps to reset Windows password with password reset disk, bypassing Windows Vista/XP password is the same as this:
 
Step 1: Login Windows with a incorrect password, it will show you a link "Reset Password.." under the password box.
Step 2: Insert your password reset disk, click the link, When a password reset wizard appears, click Next.
Step 3: Choose the drive name from the pull-down list, click Next.
Step 4: Type a new password in the new password box, and type it again to confirm it. Click Next→Finish. Then you can login Windows again with the new password.
 
Method 3: Reset Windows password with Windows password recovery program
 
In this method, you need to load a recovery program on another computer, then burn it to a CD/USB. Boot your locked computer from CD/USB and reset WIndows password offline. This is a universal password reset method.
[advertising content removed]
 
Hope helpful.

Hp password recovery in windows 8

I just wanted to tell you of a recent experience I had when contacting HP support
I called them yesterday with what I considered to be a simple question I found out that this question in their eyes was not that simple
the question was how do I set Up a password recovery flash drive in Windows 8.
the the person from HP said that he would need to check and would I please give him a minute to do so, when he came back he said that hp computers did not have this option.
I said to him how could this be as windows 8 says you can do this I also said that in windows vista and windows 7 you could do this and Why Would windows 8 Be any different he said he didn't know But this was not an option available hp in windows 8 he also stated
if I were to forget my password would be to install my operating system again. I said to him that it seemed unreasonable that I would have to reinstall my os just to recover my password and the must be a simpler option than that. he said no that would be my only option if I were to ever forget my password. I then said to him I did not believe the information he was giving me was accurate and was he 100% sure of the information he was giving me, he said yes and that he would send me an e-mail giving me step by step instructions. I said okay bye, I did not believe what he was telling me so I went online and found out in about 2 minutes all we needed to do was set this up via the settings screen and user account where it give you the option to make a password recovery usb flash drive I understand that they cannot possibly know everything but I feel if they don't know they should be willing to tell you that they don't know and passed you on to someone who does rather Than making you spend hours reinstalling an operating system that you don't need to. it also seems to me outsourcing technical support to third world countries like in this case india where they may not have a full grasp of some of the finer subtletys of the english language and company like hp dell toshiba and many others need to return technical support to the countrys in which the computers are sold and 1 other thing why is it that we no longer get a set of recovery cds with new computer and have to make a set ourselves when so often in the process of making them some write error happens and you only find out that is there is a problem with them when you come to use them I know companies need to make a profit on the sale of the computers but surely there is enough profit margin for them still to supplie you with the recovery media you need

Hi,
I afraid the pritner is not supported on Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03457812&tmp_task=prodinfoCategory&cc=us&dlc=en...
You will not be able to use any other alternative driver with the printer as there are no drivers to allow the PC to communicate with the printer through a USB connection..
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cisco ISE 1.2 vm cli admin password recovery

I'm having trouble getting this to work. I was under the impression by mounting the ISO (connect at power on) i could perform the password recovery like it states for the hardware appliance. However, if i mount the 1.2.0.899 iso image (connect at power) I don't seen to get any options in my vm console? At most, I have a <enter> at the very beginning that will take me to Grub or ADE boot menu... but I don't see anything about options to change the password?

Make sure you are following the steps in the following link:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_postins.html#38674
Also, make sure that the VM Guest is set to boot from DVD/CD first before trying the HDD.
Thank you for rating helpful posts!

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

I forgot my password recovery questions and i need it so i can purchase stuff on my ipad

i forgot my password recovery questions and i need it so i can purchase stuff on my ipad

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Dynamic Parameter Prompting for Database Connection Password

Post Author: rsharp
CA Forum: Publishing
Hi
I've been finding recently that reports using dynamic parameters and published into Crystal Server prompt for the database connection password when the dynamic parameter is accessed. Thing is, this only started happening recently for new and already existing reports with dynamic parameters and I don't know why. In Crystal Reports the dynamic parameter can be accessed without a database connection prompt being displayed but not after publishing. (Maybe there's a problem with the Publishing Wizard?) Static parameters work just fine just as they always have, but I'm a bit mystified by the fact that dynamic parameters used to work (without prompting) but now they don't. Any advice or opinion would be much appreciated.

Post Author: amr_foci
CA Forum: Publishing
from the CMC you have to set the default connection or wat connection should this report use,
go to this report in CMC, click process tab, and check the connection

ONS 15454 Password Recovery Cable

Does anyone know the part number for the password recovery cable needed to connect a laptop to the TCC card to used to reset the password to Cisco defaults? I have attached the cisco PDF which explains the connection of this cable.
Thanks

The part number is 15454-EPC=
In the past, you couldn't order this item but had to call Cisco TAC and request one.
Hope this helps.

Root Password Recovery Question

Hello all,
I have a question regarding root password recovery in Solaris 10.
The Server is a Sun Fire T1000; it has no CD-Rom drive, as well as no USB ports. One of our data architects who is the main user of this server has locked himself out of root (he also never created any other user accounts).
Now I know normally for root password recovery you use the solaris cd to boot into single user mode to take care of this but that's not an option currently. I was wondering if there is a way to put the hard drive as a slave in another Sun Fire T1000 server and then mount it and modify the shadow file removing the encrypted password. I've done this in other Linux OS's and it has worked but I didn't know about Solaris.
Any help would be greatly appreciated as it is for a project my company is working on and they have a presentation coming up in around 4-5 weeks.
Thank you!
-Mike

Well I tried making the locked out hard drive a slave on another server of the same type. But I couldn't seem to mount it, I even tried the "touch /reconfigure; init 6" to reconfigure devices but it just didn't seem to find it. I tried mounting everything in /dev/dsk but nothing was successful.
Anyone have any other suggestions on commands that might work?
I put a purchase order in for a USB to SATA converter, and got a hold of a different Sun server which has USB ports but no SATA, only IDE. As soon as I get it i'm going to try to mount it like a USB external hard drive. I believe when mounting USB it doesn't care if it's a jump drive or a external hard drive it should still mount it correctly. Hopefully this will allow me to modify the shadow file.
Thanks in advance if anyone has any other suggestions.

How to pull e-mail, password recovery phrase and password recovery answer f

Hi all,
I am very new to HR ABAP and have some basic doubts in ABAP HR.
I need to pull login which is like an e-mail id, password recovery phrase and Password Recovery Answer.
Can some one guide me from where or from which table or which info type should i pick these values and how.
Regards,
Jessica Sam.

Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support explains the difference between Alternate and Rescue Addresses and the "necessity" for a Rescue Address.
I fall into the category of not needing one (only two security questions in the challenge), so my "Forgot your answers?" link to send the email sends to my ALTERNATE address.
I do not know the criteria for 2 or 3 security questions.
ÇÇÇ

Database - 9i - password recovery

Similar Messages

Maybe you are looking for