Database Access in limited user account

I have made an application in which I am communicating with database.
Let me explain about my application first.
1. Application starts and it asks for user name and password
2. After successful login data reading or writing from /to database.
All this information whether its data or user name or password, I am storing in same database but in different tables
Now If I login from limited user then I am able to login by entering user name and password but later I am not able to read/ write to database, but If I login from admin accout then everything runs smoothly.
This happened recently and I am sure this is permision issue..
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

SQL?? MySQL, MS SQL Server, Oracle SQL, PostgreSQL, SQLLite, .......
ADO driver you use?
versions of SQL server and ADO drivers?
There is obviously some security! If there wasn't any you would not get andy trouble to connect to your server with a normal user account.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

ThinkVantage Access Connections and Limited User Account (LUA) on XP SP3

Is it really so that one has to be logged on with at least Power User privileges to get the Access Connections utility working properly with 3G/HSDPA? When logging on as a Limited User, the computer can find all the cell phone operators nearby but does not let to do a connect. But when logged on as a Power User, all problems go away.
I would not like to bump up my user privileges from Limited User to Power User, since all else seems to work fine with a Limited User Account. Any ideas about what is going wrong -- or did I just hit into a wall here?
The environment in question is Thinkpad X200 and XP SP3. Access Connections and the HSDPA driver are the latest ones I could find from the Lenovo driver download site (Access Connections v. 5.21, Ericsson HSDPA driver v. 1.0.1046.221).
Would there be any other way to use 3G connections than to use the Access Connections utility (without changing to another o/s)?
--sami

Hi Sami,
I just got stuck on the same problem as you and following is what I found in details fro ThinkVantage Access Connections version 5.30. Hope this helps.
Jakub
<Limited User>
A Limited user can create and apply only modem profiles. However, if
Administrator sets "Allow Windows users without administrator
privileges to create and apply location profiles" option in the
Global settings then the user can create and apply any kinds of
profiles in the system.
Also, a limited user cannot:
1. Edit setting for the Automatic Ethernet and Wireless location
profiles switching.
2. Edit Global settings.
3. Edit profiles created by another user in the system.
4. Renew or release IP in the Diagnostics panel.
5. Export profiles.
The limitations on Power user also apply on Limited user.

Officejet pro 8500 a909g, limited user accounts can't use printing preferences

The above discription explains most of it. I had install this 8500 printer, then shortly after, uninstalled the other two older printers I was previously using. That is when the problem started. I can not access printing preferences from a document or from control panel\printer and faxes. But I am able to access from the administrater account. I did an online chat with HP help and what we did made sence, but did not work. We went into the security tab in properties and added the limited user account for all permissions and reboted the computer. Did not work!!!! I have a dell laptop, windows xp pro, and the printer software is now uninstalled. the window that pops up when I click on properties is: Function address 0x50085a97 caused a protection fault. (exception code 0x0000005) Some or all property pages may no be displayed. I don not have this problem as an administrater only as a limited user.

I had this similar problem. Installed this printer a few months back and for some time it was printing fine. Recently, I changed the default preferences to black/white, draft, low ink etc etc. Now if I click on the Properties I get this same window:
*** (x50085a97 caused protection fault (exception code 9xc0000005 some or all property pages could not be displayed) ***.
Running XP on an Dell Intel Pentium and it happens irrespective of the application I am using - usually firefox or staroffice. 9 times out of 10 I can't change the properties, but occasionally it allows me too then reverts back. So now I am stuck with everything printing black/white as that's the default I set! Any suggestions welcome.

9.3.0 File association "icon" in XP Pro limited user account problem?

XP Pro SP3 all MS Updates.
Problem occurred after updating Adobe PDF reader to 9.3.0 via the program update feature
File association ok but weird thing is on Limited user account. The icons for a PDF file are not Adobe ones it is a generic one. If I try to open the file it opens with the correct program.
Problem evident on desktop icons and in looking in windows explorer.
If I attach a file in my email program (Outlook Express) it shows the correct icon.
These files were created from various pdf creators. Ofice 2007 Mac SO X 10.4.11 Quartz, Adobe InDesign CS4 (6.0) and InDesigdn CS4 (5.0) so it doesn't seem matter what program created the files.
I am at a loss to figure out how to get the correct icon in the Limited User Account. The correct icons show up in the Admin account. Note the files do open with the adobe reader.
Thanks
Celeste

Gosh anyone out there have any idea how to resolve this? The generic MS icon for the files in the limited user account is annoying as all get out. Anyone out there from Adobe or is this not a monitored forum. Not sure. Thanks
Note: Correct program is accessed just the icons for the PDF files in the limited user account are the generic MS ones.
Celeste

Can I downlaid Firefox on my Administrator account but have it not be accessible to the Limited User Account?

I have Windows XP and want to know if I can download and use Firefox on the Administrator account only and it not be accessible to the limited user account. The reason is is we don't want our kids having access to to more than one tab at a time. any suggestions?

Yes you can,
# locate firefox.exe file in a directory similar to C:/program files/mozilla firefox/firefox.exe
# right click it, select '''properties'''
# add access to your account and remove any entries for other accounts you don't need.
Please let us know whether that works for you.

Why don't java applets run when using Firefox 4.0 in a windows limited user account?

Java applications will not run in Firefox 4.0 when the windows user/process only has limited user access rights. The systems, I see this behaviour on have Windows XP Pro SP3, Firefox 4.0 and JRE 1.6.0_24 installed. The java application will run when when full administrative rights are present. This issue did not occur with the 3.6 firefox version that was previously installed.

The problem also exists with the newer Firefox 4.0.1 and Java 1.6.0_25 versions.
Enabling administrative rights resolves the issue ... though this defeats the purpose of using a limited user.
The underlying bug appears to be in the Firefox java plugin detection code. The issue is related to the detection code requiring write access to the HKLM\SOFTWARE\mozilla.org windows registry key. The limited user only has read access for this registry key. The behaviour was identified using the Sysinternals ProcessMonitor utility ... showed firefox calling an interface to create the registry key and getting an access denied response in the limited user case.
A more targeted workaround for the issue is to grant the limited user write access on the HKLM\SOFTWARE\mozilla.org windows registry key. This avoids the need to grant administrative rights to the user and enables the java plugin to be detected. That is, it works on the 2 XP systems where the java plugin wasn't being detected in limited user accounts.

Why won't Fire Fox 34.0.5 restart in limited user account ?

FF 34.0.5 crashed while in the limited user account and won't load when I try and restart it. FF will load and start when I use the admin account with no problem(s). I've uninstalled and re-installed FF 34.0.5 twice but the limited user account still will not restart/load. FF will start in admin account after the re-installs.
When I try and restart/load FF in the limited user account and use Windows task manager to see if FF is loaded, task manager does show FF is loading into memory however the usual FF user interface/display screen does not appear and while the system tries to load FF, FF consumes major portion of memory (up to %99 sporadically). After several minutes FF will display the "error sending screen" but after FF closes, final/exit error message displays that FF was unable to send error details to Mozilla Support.
I'd prefer to try and resolve this problem w/out having to re-install FF from scratch (deleting FF folders, memory registry entries etc. etc. ) because I don't want to lose the current FF configuration (addons, extentions, synch info etc. etc.) I've set up using the limited user account.
I've switched to the Chrome browser temporarily but prefer FF.
Here's the crash report I copied from the "detail" crash report section (please redact email info if possible before posting question) . Thanks :
AdapterDeviceID: 0x2a42
AdapterDriverVersion: 7.15.10.1518
AdapterSubsysID: 145010cf
AdapterVendorID: 0x8086
Add-ons: jid1-ASMu9YBkP688TA%40jetpack:0.2.1,jid0-bbA9VAawX3LMWDu668aUDrpQVXU%40jetpack:1.0.0,%7B6140bbfd-aa20-11e1-aba7-109add603214%7D:1.6.9,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.6,jid1-BJLRspk01OAAzg%40jetpack:0.5,jid1-YvCVXxA75Ob1eQ%40jetpack:1.0,jid1-MnnxcxisBPnSXQ%40jetpack:0.2.5,fastestsearch%40mingyi.org:3.31
AvailablePageFile: 2471198720
AvailablePhysicalMemory: 168935424
AvailableVirtualMemory: 140570624
BIOS_Manufacturer: FUJITSU // Phoenix Technologies Ltd.
BlockedDllList:
BreakpadReserveAddress: 48693248
BreakpadReserveSize: 41943040
BuildID: 20141126041045
CrashTime: 1420502879
EMCheckCompatibility: true
Email: p&&&&&j&&&&@gmail.com
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1418173648
JSOutOfMemory: Reported
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a42, AdapterSubsysID: 145010cf, AdapterDriverVersion: 7.15.10.1518
OOMAllocationSize: 1
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 33503
StartupTime: 1420502497
SystemMemoryUsePercentage: 94
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 6565580800
TotalPhysicalMemory: 3172098048
TotalVirtualMemory: 2147352576
URL:
Vendor: Mozilla
Version: 34.0.5
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] DATAGRAM 0 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{849F5044-0498-477B-8D72-28EE4D2B3729}] SEQPACKET 3 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{849F5044-0498-477B-8D72-28EE4D2B3729}] DATAGRAM 3 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] SEQPACKET 6 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] DATAGRAM 6 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2B5D0F9B-5F42-4471-8299-3D8E5AB93687}] SEQPACKET 5 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2B5D0F9B-5F42-4471-8299-3D8E5AB93687}] DATAGRAM 5 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{9AA1DCBA-B641-46CA-942D-B1E6F112D0AC}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{9AA1DCBA-B641-46CA-942D-B1E6F112D0AC}] DATAGRAM 4 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{A7317EE0-B0B1-4815-861F-E7D47D2038B8}] SEQPACKET 9 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{A7317EE0-B0B1-4815-861F-E7D47D2038B8}] DATAGRAM 9 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] DATAGRAM 1 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{849F5044-0498-477B-8D72-28EE4D2B3729}] SEQPACKET 8 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{849F5044-0498-477B-8D72-28EE4D2B3729}] DATAGRAM 8 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{6D1D7109-DDCC-43CE-AF62-42E679D9253C}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{6D1D7109-DDCC-43CE-AF62-42E679D9253C}] DATAGRAM 2 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] SEQPACKET 7 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] DATAGRAM 7 : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.

Looks like you cleaned up the email before posting, which is good.
Before experimenting further, if you want to eventually restore the last set of windows and tabs you had open before the crash, could you back up your session history files?
Since Firefox is closed, you can access your current Windows user Firefox profile folder by pasting the following into the search box on the Start menu (or the address bar of a Windows Explorer window) and pressing Enter:
%APPDATA%\Mozilla\Firefox\Profiles
From that point, double-click into the most recently updated folder.
''(Note to other readers: if Firefox is currently running, do not exit out, but instead open your current Firefox settings (AKA Firefox profile) folder using either
* ''"3-bar" menu button > "?" button > Troubleshooting Information
* ''(menu bar) Help > Troubleshooting Information
* ''type or paste about:support in the address bar and press Enter
''In the first table on the page, click the "Show Folder" button. This should launch a new window listing your current settings files.)''
(1) Scroll down and double-click into the '''sessionstore-backups''' folder. Copy all files here to a safe location such as your Documents folder.
(2) Go back up to the main level and scroll down to the sessionstore file(s). sessionstore.js usually contains your session data as of the last time Firefox exited normally. In this case, it might not be there. Go ahead and copy any other files whose names start with sessionstore and which have dates in a relevant range to a safe location such as your Documents folder.
By default, Windows hides the .js extension. To work with files most accurately, you may want to turn off that feature. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
The kinds of files you may find among your sessionstore files are:
* sessionstore.js: the windows and tabs from your previous Firefox session (created when Firefox closes)
* recovery.js: the windows and tabs in your currently live Firefox session
* recovery.bak: a backup copy of recovery.js
* previous.js: the windows and tabs in your last Firefox session, after Firefox starts; sessionstore.bak for pre-33 versions of Firefox
* upgrade.js-''build_id'': the windows and tabs in the Firefox session that was live at the time of your last update; sessionstore.bak-''datetime'' for pre-33 versions of Firefox
Okay, next steps in the next post.

Shockwave crashes system in limited user account

I am having a problem with shockwave content playing on my
system. I have followed every single step in this article kb403082,
except for formatting my system and reinstalling windows and
shockwave alone (atomic bomb option). I couldn't do step 5
completely because there is no FlexNet Licensing Service listed.
The problem is that when I am in my admin account everything
runs fine. When I install, play or open an application with
Shockwave content (ie, Bookshelf 2000), everything plays nicely.
When I log into my Limited User Account (Power User option when
created) and either open Bookshelf 2000 or open a website in IE7
with shockwave content then the entire system freezes and I have to
reboot.
I don't understand what it is about the limited user account
that is causing this, but it makes me believe that Shockwave needs
to access some system level component that is blocked in a limited
user account and it is causing the crash.
Thanks for any help,
Sashi
Windows XP Professional SP3 (all latest updates)
Internet Explorer 7
NVIDIA Geforce 8800 GT (180.48 drivers)
ASUS P5N-T Deluxe

Wow, I just fixed my problem. I had the latest drivers for
the video card, but NVIDIA just released a new set on the 22nd. So,
I just downloaded them and installed the new 181.22 and that fixed
it. I don't know if it was the new driver or just the process of
installing the new driver. I wonder what would have happened if I
reinstalled the same 180.48 drivers?
Either way problem solved. Odd.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

"Write Error - Limited User Account"

I get the following message after having worked on a flash
file for a couple of hours:
"An error occured while attempting to write to a file. If you
are logged in with a limited user account, then you may be
attempting to write into another user's folder which is not
supported."
I have a perfectly legit copy of MX Studio 2004 and is
registered and in good standings at Adobe. I saved my file every 15
minutes or so. Now, I can't save it, or do a save as either, plus
the file has vanished. I still actually have it because I have not
closed Flash, but it will be lost once I shut down. The SWF file is
still in my file system, but the FLA file has disappeared.
This has happened to me once before - any idea what's going
on?
Thanks!

sounds like a hard disk error or fragmentation, try saving
the file under a different name (save as...) in a different
directory folder.

Satellite M40-307: Accessibility utility doesn't work with limited user account

Hello everybody,
I have got a Satellite M40-307 (PSM44E), and I have got a problem with the "accessibility" utility, that displays an icon in the Windows XP notification bar, to let the user know whether the "Fn" key is active or not.
That this utility would not work for the administrator would not worry me a lot, as the administrator is supposed to know what he does. But the limited user does not have access to it, this more bothering.
In an administrator session, this utility works pretty fine. But in a limited user session, if I try to launch it by [runas /user:admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
I am answered that the file TCMSVR.DLL cannot be found. If I launch it normally, a message tells me that this utility requires I am connected as an administrator.
So, what can I do to use this utility normally, i.e. in a limited user session*?

Hello Markus,
Did you read ?
I executed TACSPROP with the admin rights, and it does not run.
So, to follow you, I had a look, on TACSPROP.EXE and TACSPROP.DLL, the users had "read/execute" and "read" rights. I provided "full rights", and it solved nothing.
Obviously another program must be launched before, that is by default launched only by the administrator, and I am searching what program it is.
Thank you.

Cannot see iPodService.exe from limited user account.

I have a 4th-generation iPod which I am attempting to connect to a computer running Windows XP Pro. I do most of my work under a limited-permission account, running as administrator only to install new software, such as the iTunesSetup.exe installer. However, I am finding that when I connect the iPod to the computer while running as a limited account, the iPod cannot sync, presumably because it can't see the iPodService.exe. The computer does see and can access the iPod as a mass storage USB device correctly, however.
I've done each of the first four R's repeatedly; I'm hoping that I don't have to restore the iPod to resolve this issue.
Thanks in advance.
Gateway CX200 Windows XP Pro

hi eleuthero!
hmmmm. just checking to see precisely where you are in the troubleshooting process. have you checked through these possibilities yet?
iPod for Windows: Fast user switching in Windows XP is not supported
iPod shows up in Windows but not in iTunes
love, b

Limited user accounts

When I attempt the following sequence:
system prefs./accounts/'select' user account/limitations/some limits/'select' others/choose "locate"/go to hard drive/'select' application/'select' add.
Then that sequence gets repeated to add more applications for the user to access. Also, the 'applications' I'm selecting are not in the 'applications' folder. They are stored in their own separate folders.
Then I exit System Prefs.
Then I reopen System Prefs. and all the applications I had selected are gone from the 'users' selection, except one.
Any ideas or suggestions or is this too vague?
iMac G3 Mac OS X (10.4.7)

Kate,
Why is your son not able to update the software? Any error messages?
Having a not updated iPod has it's disadvantages but I don't think it physically damages the unit.

Access Denied creating user accounts through vba

Hello,
I have a MS-Access application that runs on a Windows 2012 server. My customer logs into the server using RDP. The MS-Access application is started up automatically by means of the environment variable in the user settings. The customer needs to be able
to create new windows users for this application, simply by clicking a button.
The VBA script to create users works, because when I start up the MS-Access application with my own logged on Administrators account, the new users get created. If my customer tries it, he gets 'Access Denied' error. I have added his user account to
the Power Users group, but that did not solve the problem. I also tried to make him member of the DCOM Users Group, the 'Access Denied' error remains...
I do not want to give him administrator priviliges, because he is 'just a customer'...
What do I need to do for this setup to work? I tried altering some DCom settings, but frankly I do not have enough knowledge to feel comfortable with this. Hope anybody can help me out here...
best regards, Rob

Is this a standalone server? Only administrators can create user accounts, so there is no work around for that. You could look at something that has the administrator account/password stored and launch PSEXEC or something else in an elevated session behind
the scenes but that is a security volunerability because the credentials are stored.
If the account is being created in an Active Directory environment you could delegate permissions to the appropriate OU for your customer.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

I'm unable to grant full access to 2nd user account. What am I missing

While our MacBook Pro is out for repairs, I need a way to process my wife's emails and other business. So I'm trying to set up a 2nd user account for my wife on our iMac (running 10.7.5 Lion). Unfortunately, every step I've tried has failed to grant permission for her account to access the iMac desktop or launch applications other than Safari.
Here's what I've tried:
1. I created an account with my wife's name and password under Users & Groups in System Preferences.
2. In her Users & Groups account, I granted her Adminstrator privileges.
3. In the Sharing folder in System Preferences, I selected all the folders except those labeled "remote" and "xgrid" (whatever that is). I granted Read & Write privileges for each one. These included two Desktop folders, and I added the folder for Applications.
4. I made sure File Sharing was turned on, along with Printer Sharing, Web Sharing, Screen Sharing, Internet Sharing, etc.
5. Under Sharing Options, I noted a checkmark in the box labeled "Share files and folders using AFP", although the "number of users connected" was 0. I left that alone.
6. Because several sharing choices were listed as "blocked by firewall," I turned the Firewall setting off.
Despite all this, when I log in as my wife, I cannot launch any major applications except Safari, whether from the Dock or Applications folder. In fact, most of the apps in the folder are grayed out. And when I try to access the Desktop, Other Files, and various other folders, I receive a message that her account "does not have permission to see the contents." Why not? What have I overlooked?
This is becoming an urgent problem, because there's business that must be conducted. I have had similar problems with the iMac from the start, when it refused to accept me as the rightful owner of files that were transferred from our older Mac Pro dwesktop. Yikes!
Any help on this will be very much appreciated. Thanks.
Message was edited by: David Henderson7

Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Database Access in limited user account

Similar Messages

Maybe you are looking for