Database administration alert
Hi
here i am posting the issue as below:
BR970W Database administration alert - level: WARNING, type: CRITICAL_SEGS, object: (table) SAPR3./BMC/YGR_AVAILAB, value: 640 K
as i checked with SAPDBA -f, i am getting an error
a - Tablespace: PSAPYBMCD
b - Log checks: no
c - Free space and fragmentation of all tablespaces
d - Check free space of objects in all tablespaces
e - Check free space of objects in tablespace PSAPYBMCD
f - Alter tablespace PSAPYBMCD add data/temp file
g - Drop tablespace PSAPYBMCD
h - Display all tablespaces and data/temp files
r - Display raw device drivers in /dev
q - Return
Please select ==> f
SAPDBA: Error getting file system space information of
'/oracle/sid/sapdata7'.
(Such entry does not exist.)
Press <return> to continue ...
as i checked.............
bdf | grep /oracle/sid
/oracle/SID/sapdata1
so my Q is how to change the filesystem to /oracle/SID/sapdata1 from sapdata7.
sap : 4.6c
oracle : 9.2.0.8.0
os : hp-ux
so can anyone help me in changing the filesystem path?
Thanks in advances
Hi,
It seems that environment variable SAPDATA<n> are not comfiture properly?
But why dont use brspace?
e.g. +brspace f tsextend -t PSAPYBMCD -f SAPDATA1 -s <size>+
Nahum
Similar Messages
-
Warning in DB13 Check DB "BR0970W Database administration alert"
Hi
We have an alert message in DB13 when we check the checkdb log. Log details are as below
BR0970W Database administration alert - level: WARNING, type: CRITICAL_FILE, object: /oracle/EPR/sapdata10/btabd_11/btabd.data11, value: (max_size) 30466040 KB (> 29439485 KB)
This warning is for all the datafiles; I did just give the sample log above.
Can you please suggest and help resolving this issue?
Thanks in advance.Hi,
The issue here is that there is no enough disk space for the datafiles to extend. In this case you can turn off the auto extend or Increase the disk space of sapdata10 or decrease the max_size or you can move some of the datafiles to other directory or filesystem.
You can turn off the auto extend while the database is online. After turning off the auto extend, you need to monitor the datafile/tablespace size periodically.
Regards,
Varadhu -
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATIST
Dear all,
We have recently migrated 4.6c/oracle9i/solaris 6800 5.8 to 4.6c/oracle10g/HPUX11.23
After the migration everything was succesfull. Except the below error, when I run a dbcheck from db13.
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g1m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g2m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g4m2.dbf
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQD
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQI
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCRSTATE
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSDATA
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSSTATE
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ATAB
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.CDCLS
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX_DATA40
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DBTABLOG
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDLOG
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTF
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTT
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTF
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTT
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXB
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXC
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.GLSP
Can anyone help us to overcome the above issue
Regards
SenthilThank you Warren. I shall do that reply to you.
Also I have received the below error messages
oracle9i/solaris 6800 5.d to 4.6c(Kernel46D)/oracle10g/hpux11.23.
Everything works fine except the below Three errors:
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
BR0970W Database administration alert - level: WARNING, type: IN_WRONG_TABLESPACE, object: (table) SAPR3.APQD, value: PSAPAPQDD
BR0978W Database profile alert - level: ERROR, parameter: LOG_ARCHIVE_START, value: FALSE (<> TRUE)
Can you help
Regards
Senthil -
BR0970W Database administration alert
I get this error in DB13 in CheckDB, .
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPCRM.VCSMONITOR
Please suggest the fix for this.
Thanks
ShajiHi Markus,
Thanks for your reply.
I checked in SE14, the table VCSMONITOR is Transparent table and the Status is "Not Actve" (Exists in the database).
List of all indexes (constraints) of the table
Index name Unique Short description
0 X Primary index
There are no secondary indexes
Checked for this table/objec in ECC/SRM/BW systems, in SE14 it reports as "object does not exist".
Could you guide me further please.
Regards
Shaji -
Solution Manager Setup System Monitoring DB Administrating Alerts
Greetings experts
Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
Satellite system (FSD) database MTE's are all active (RZ20).
Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
Service: Setup System Monitoring
Tree:
Setup System Monitoring
+--> SAP System FSD 1320011126
+--> Database FSD-DATABASE
|
+--> Administrating DB FSD-DATABASE (DB2 6000)
Issue: DB Administrating Alerts do not display.
*Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
Regards
Peter BabbingtonHI
1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to MTE class of satellite systems.
2. How do i configure this out of solution manager, and bypassing the satellite system?
You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
Also go through the links
http://service.sap.com/moniotring
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
Thanks
Prince Jose -
Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
PiyushHi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A -
How to apply row level security against the database administrator
I would like an advice in applying row level security against the database administrator. We need to prevent DBA from editing data in some table rows or have any indication that data was corrupted.
There is no problem in viewing the data so we considered one way hash function or digital signature which will be stored in the same table, but we see following disadvantages:
HASH - DBA may use the same hash function to update the stored data after he changes the sensitive row.
Digital signature - the is a need to manage and keep the private key in a safe place outside of DB
Is there additional ways to achieve the aim?Does VPD helps to prevent from DBA to edit/view a data in specific rows?Yes.
If I correctly understand, DBA has full access to security policy used by VPD to control the access and can grant himself privileges that I don't want.You can to define which users can be exempt of the politics, for the context or by Grant EXEMPT.
This includes DBAs.
The simple fact of being DBA doesn't guarantee the exemption.
Everything goes to depend of the VPD config. -
How To Disable Verify Database Message Alert
How To Disable Verify Database Message Alert?
I have a VB6 open Crystal Reports using Crystal Reports XI R2 (SP5) and almost every time I open a report, I get an alert message about the table has been changed and I have to click "Ok" to make it goes away. Is there a way to disabled this alert or set default to "Ok" so I do not have to click this message every report. Thank you very much.Hello,
You must verify if the database has changed so you can't disable the message. CR must match what the DB is using or the reports will fail or return wrong data.
It's odd that even after verifying the DB in the designer your app still needs it to be verify the report. You did save the report correct?
Also:
Dim CRApplication As CRAXDDRT.Application
Dim Report As CRAXDDRT.Report
Is the report creation engine and you should be using craxdrt.dll. You need to be licnesed to use craxddrt.dll and this may cause problems for you later when deploying.
Use:
Dim CRApplication As CRAXDRT.Application
Dim Report As CRAXDRT.Report
The mapping is not a switch you can turn on or off but it is Event driven. You need to add code to the viewer section to capture the event if the mapping event fires. Then you can set it to the way you want to use it.
I suggest you purchase a case on line and get to the Report Design team to figure out why when you verify the report your app still thinks it needs to be verified. Something going on in your report that the forum makes it difficult to debug the problem. You can't attach files to forums.
Link to Single Case purchase:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Thank you
Don -
Oracle BR0973W Database operation alert warning
Hello experts,
I hope you can help me with the following:
In transaction DB13 the checkdb job reports the following errors:
BR0973W Database operation alert - level: WARNING, operation: sdvgirhz.dbp, time: 2007-05-14 15.46.27, condition: Last 'dbp' operation failed with rc = 4
BR0973W Database operation alert - level: WARNING, operation: sduxubpz.tse, time: 2007-03-30 08.58.27, condition: Last 'tse' operation failed with rc = 4
BR0973W Database operation alert - level: WARNING, operation: sduxuaou.dfa, time: 2007-03-30 08.46.40, condition: Last 'dfa' operation failed with rc = 2
I would like to get rid of these messages in dbcheck but can't figure out how to do it.
I searched the notes database, google and this forum and still couldn't find an answer.
Some data regarding oracle and sap versions:
SAP_ABA 700 0009 SAPKA70009 Cross-Application Component
SAP_BASIS 700 0009 SAPKB70009 SAP Basis Component
PI_BASIS 2005_1_700 0006 SAPKIPYJ76 PI_BASIS 2005_1_700
ST-PI 2005_1_700 0003 SAPKITLQI3 SAP Solution Tools Plug-In
SAP_BW 700 0006 SAPKW70006 SAP NetWeaver BI 7.0
SAP_AP 700 0003 SAPKNA7003 SAP Application Platform
BBPCRM 500 0003 SAPKU50003 BBPCRM
ST-A/PI 01I_CRM500 0000 - Application Servicetools for CRM 500
Database system ORACLE
Release 10.2.0.2.0
Thanks in advance for helping.
Regards
Dirk Visserthe operations mentioned were not succesfully done...check the corresponding logfiles
-> dbp = alter database parameter (brspace)
-> tse = extend tablespace (brspace)
-> dfa = alter data file (brspace)
GreetZ, AH -
Career from Systems to Database Administrator
Hi all,
I need some career advice. I want to persue my career as an Oracle Database Administrator and I have underwent a basic level of training on Oracle Database administration.However, I have been recently moved to a team which is into -- systems. And my work is mainly related to Active Directory,Exchange and managing servers.
I searched a lot about -- 'starting the career as an Oracle DBA' and found out that people generally start as Systems Admin/Unix Admin/Developer and then switch to DBA Admin. My work experience is less than 1 year. I would like to know-- should I continue with this Systems work and get some experience in System Admin to get into Oracle DBA Admin?
If so,then for how long should I continue with Systems before actually switching over to Database Administration? Moreover, should I do some certifications like MCSE while I am working in Systems? And when and how should I start my preparation for Oracle certifications?
Hope to get inputs from you all.
Thanks in advanceyou have to have some earnings, if you are already at another area, you can take adavantage of being already hired somewhere, and you can start studing in parallel so you get acquinted with oracle. First kind of job you may find is a DBA at entry level, which lets you in a pretty difficult position, but there is no other way to start.
Download software and manuals and start practicing as much as you can. A lot of peaple I have seen here at entry level have taken this strategy:
- continue with current job
- start self-studing oracle from manuals
- installed oracle at a local pc/laptop (XE or EE)
- a lot of questions, lack of concepts, problems, bad configuration appear
- they take advantage of this forum to start troubleshooting and continue learning
- when they feel more comfortable with knowledge the make the OCA exam and later on OCP.
- either way, keep studying
~ Madrid. -
Dear SAP Gurus,
We are getting the following error in Check Database in DB13
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14254080 (>< 4096,512 KB)
The current Parameter : 14254080
We have change the parameter as per SAP Note#830576, still the same error is comming.
Kinldy Help.
Thanks in advance.Hi Vijay,
Are you trying to change log_buffer to a smaller size and you can't? If you on Oracle 10g, you won't be able to reduce log_buffer as according to Oracle Metalink 351857.1, "The Log_buffer Default Size Cannot Be Reduced In 10g R2".
If you are concern about the warning in DB13, go to txn DB17 to change the condition will help to get rid of the warning.
Regards,
Annie -
DB13 Check, Oracle BR0973W Database operation alert warning
Dear all master and Gurus,
when i run check DB process on DB13 it was completed with following errors. i've serched over googling, SDN, and others but couldnt get any exact answer.
BR0973W Database operation alert - level: WARNING, operation: aeghclvm.dsv, time: 2011-07-09 13.35.38, condition: Last successful 'dsv' operation older than 10 days
BR0973W Database operation alert - level: WARNING, operation: beghcgas.afd, time: 2011-07-09 12.30.18, condition: Last successful 'afd' operation older than 10 days
BR0973W Database operation alert - level: WARNING, operation: beenppkm.aff, time: 2010-11-10 22.35.48, condition: Last successful 'aff' operation older than 10 days
What is the meaning of dsv, afd , and aff?
Should I ignore these warning?
How to resolve ?
Any advise is needed, Thanks
Gustria WekaHi
When a backup of database or archive log is triggered, it writes a log file and the extension is based on the type of backup executed
Names of the BRBACKUP Detail Logs
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/content.htm
Names of the BRARCHIVE Detail Logs
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/frameset.htm
Hope this helps you.
Regards,
SBK -
Oracle 10g Database Administration Workshop I
Dears !
How i may get a soft copy of the Oracle 10g Database Administration Workshop I from the net for downloading in free.
Thanks.Ashraf,
Besides the fact that the soft copy is and only is to be used by Oracle University trainers and is a properity of Oracle and that's make the use of it outside oracle illegal if you are not a part of OU, I would say one more thing.If you are really on the level to start with oracle database administration learning which seems to be true from the request you made,you wont be able to clear ANY doubt from the book alone. You need some one to have a talk/discussion to clear them and thats why its called ILT,instructor lead training. There is no use at all of the book if you don't get the doubts clear and I can gurantee that by juse reading the book,soft/hard whatever copy,you wont get anything.So it better to come in OU and do a proper course.If you think price is the issue than you can do the same from a partener too where price would be less as well.
Aman.... -
I have been getting an annoying popup from iSync titled "Database Reset Alert", saying that
"Inconsistencies in your sync information for Contacts and Calendars were detected and have been repaired".
"The next sync for entourage 2008, address book, entourage, iSync, .Mac and iCal may take longer than usual".
I have done the following to try and fix the problem:
1. in iSync preferences I "Reset Sync History..."
2. I disabled synch in Entourage 2008
However the popup still comes every 10 or 15 minutes and is extremely distracting. I have looked in this discussion group and saw that some people had the same problem but the problem was resolved when they reset the sync history from the preference menu, but that did not work for me.
Thanks,
IvryMy MM, iPhone, and iCal info is correct, however, my Address Book and Entourage addresses only lists the persons' name and no other data. Entourage calendar has no data. I'm trying to advanced sync from MM to computer.
I receive the same message:
"Inconsistencies in your sync information for Contacts and Calendars were detected and have been repaired.
The next sync for iSync, iPhone, Address book, iCal, .Mac and Entourage may take longer than usual."
Very frustrating! I'm afraid that if something messes up MM, I've lost my info. Anyway to backup MM info while waiting for a fix on the inconsistencies issue?
The first sync with MM worked.
Thanks,
Meg -
One Book or Document for start on Database Administration
Hi
Before anything thanks to everybody that contribute on this forum.
May you introduce me book or document for start on Oracle database administration?
Thanks in advanceBesides the 2-Day dba guide, you should have a read of the Concepts and Administrator guide from the docs at http://tahiti.oracle.com . In addition, read these following books as well,
http://www.amazon.com/Beginning-Oracle-Database-11g-Administration/dp/1590599683/ref=sr_1_1?ie=UTF8&qid=1331391080&sr=8-1
http://www.amazon.com/Expert-Oracle-Database-Architecture-Programming/dp/1430229462/ref=sr_1_3?s=books&ie=UTF8&qid=1331391103&sr=1-3
Good luck!
HTH
Aman....
Maybe you are looking for
-
Upload pics from my thunderbolt to macbook pro
Hey Guys, I was wondering if anyone here nows how to get pictures from the thunderbolt onto a macbook pro. When I hook up my phone to my macbook it says it can't read it. Im new to mac as well. If anyone could give me a detailed response on how t
-
PSE 12 crashes continually whilst making slide show
Over the last few days I've had problems with the program crashing immediately on opening. After advice from this group, I managed to eliminate that problem but now seem to have created another, Whilst trying to construct a slideshow I have managed t
-
Dreamweaver FTP problems and Yosemite [subject edited by moderator]
Dreamweaver (newly) installed won't recognize my server (ftp.jakkoke.com). Have checked firewall (no problem), other ftp programs which work just fine, old version of Dreamweaver - works but not with Mac os 10.10 Yosemite. Set up irs.guv - new Dreamw
-
Qosmio G50 - Repairing windows from the HDD
Hello all My laptop - QOSMIO G50 - needs a bit of cleaning up and I was thinking of reinstalling from scratch. I know I can use the "repair" function which is "hidden" on the HDD which will reset the pc to it's initial installation. But i still do ha
-
Aperture 2 Image Preview Corruption?
I just installed Aperture 2 (upgrade) this weekend, and am noticing that eventually, after several minutes of use, image previews (main window, not thumbnails) will start becoming corrupted. The corruption looks like streaks or bands of altered color