Database Clustering Problem

Hi All,
I have to clarify regarding DB Clustering, existing system is an EP6 SP6 with Oracle 9i on Solaris platform. It has to be clustered with MS SQL Server on Win2k.
Thanks in advance for the kind help!!!
Cheers
Nithin
Message was edited by: Nithin S J

Can you run the following and check the output:
db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
I suspect you may see the following error in the debug.txt:
Create_IP_Resource    fnc_errcode 5045
If you see the fnc_errcode 5045
In that case, error 5045 which is a windows error, means               
ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
couldn't find the "public network" as indicated by IP_NETWORK.         
Windows couldn't find the MSCS network called "public network".  The   
IP_NETWORK parameter must be set to an MSCS Network., so running the   
Cluster Admin GUI and expanding the Cluster Configuration->Network to  
view all MSCS networks that were available and if "public network" was 
one of them.                                                           
However, the parameter IP_NETWORK is optional and you could be commented
out. In that case the first MSCS network detected by the system was    
used.  You may already have the instruction for how to set up a        
microsoft cluster. Nevertheless, you may find the following web link   
useful:                                                                
http://www.microsoft.com/windows2000/techinfo/planning/server/clusterste
ps.asp                                                                               
I think is caused by the fact that they are specifying an IP Address   
that is already used by one of the resources.  This needs to be a third,
seperate IP Address.  
If you do not see the fnc_errcode 5045 please paste the debug output.                                                
Regards,
Adam

Similar Messages

  • SIMPLE Database Design Problem !

    Mapping is a big problem for many complex applications.
    So what happens if we put all the tables into one table called ENTITY?
    I have more than 300 attributeTypes.And there will be lots of null values in the records of that single table as every entityType uses the same table.
    Other than wasting space if I put a clustered index on my entityType coloumn in that table.What kind of performance penalties to I get?
    Definition of the table
    ENTITY
    EntityID > uniqueidentifier
    EntityType > Tells the entityTypeName
    Name >
    LastName >
    CompanyName > 300 attributeTypes
    OppurtunityPeriod >
    PS:There is also another table called RELATION that points the relations between entities.

    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    check the coloumn with WHERE _entityType='PERSON'
    as there is is clustered index on entityType...there
    is NO performance decrease.
    there is also a clustered index on RELATION table on
    relationType
    when we say WHERE _entityType ='PERSON' or
    WHERE relationType='CONTACTMECHANISM'.
    it scans the clustered index first.it acts like a
    table as it is physically ordered.I was thinking in terms of using several conditions in the same select, such as
    WHERE _entityType ='PERSON'
      AND LastName LIKE 'A%' In your case you have to use at least two indices, and since your clustered index comes first ...
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Have you ever thought of using constraints in your
    modell? How would you realize those?
    ...in fact we did.We have arranged the generic object
    model in an object database.The knowledge information
    is held in the object database.So your relational database is used only as a "simple" storage, everything has go through your object database.
    But the data schema is held in the RDBMS with code
    generation that creates a schema to hold data.If you think that this approach makes sense, why not.
    But in able to have a efficent mapping and a good
    performance we have thought about building only one
    table.The problem is we know we are losing some space
    but the thing is harddisk is much cheaper than RAM
    and CPU.So our trade off concerated on the storage
    cost.But I still wonder if there is a point that I
    have missed in terms performance?Just test your approach by using sufficiently data - only you know how many records you have to store in your modell.
    PS: it is not wise effective using generic object
    models also in object databases as CPU cost is a lot
    when u are holding the data.I don't know if I'd have taken your approach - using two database systems to hold data and business logic.
    PS2: RDBMS is a value based system where object
    databases are identity based.we are trying to be in
    the gray area of both worlds.Like I wrote: if your approach works and scales to the required size, why not? I would assume that you did a load test with your approach.
    What I would question though is that your discussing a "SIMPLE Database Design" problem. I don't see anything simple in your approach when it comes to implementation.
    C.

  • Database termination Problem

    Hi every body ..plz help me on this..
    We are facing database termination problem in ECC6 production syste.
    Database: Oracle 10.2, O/S: Windows 2003. Spam  :27, SP level 13.
    Error is:
    Errors in file f:\oracle\p02\saptrace\background\p02_ckpt_6520.trc:
    ORA-00206: error in writing (block 3, # blocks 1) of control file
    ORA-00202: control file: 'D:\ORACLE\P02\ORIGLOGB\CNTRL\CNTRLP02.DBF'
    ORA-27072: File I/O error
    OSD-04008: WriteFile() failure, unable to write to file
    O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
    When we are performing backup then data base termination occuring freequently.
    Give right solution as early as possible.
    Thanks,
    Nani.

    Hi,
    Have a look at below snote which actually speaks about the oracle error codes
    Snote :  546006
    within the Snote it says :-
    " If you cannot access a database file (for instance a data file, control file or RedoLog) for whatever reason, an ORA-270xx appears. The actual cause comes from additional error messages (usually in the operating system) that occur on ORA-270xx. "
    And as per your last update
    " ORA-00206: error in writing (block 3, # blocks 1) of control file
    ORA-00202: control file: 'D:\ORACLE\P02\ORIGLOGB\CNTRL\CNTRLP02.DBF' "
    i think there is problem accessing the database control file. Hence you  are facing the above problem.
    I think if you recreate your control file i think, it should resolve the problem.
    Hope it will be helpful to resolve your problem.
    Rgds
    Radhakrishna D S

  • Immediate HELP in Tomcat 5 to Postgresql 7.4 database connectivity problem

    Hi,
    I failed to connect Tomcat 5.0.24 with Postgresql
    7.4.2. The files created by me and the changes i had
    made in the existing files are rates.jsp,
    conversionDAO.java, web.xml and server.xml. The error
    message on the top of the rest of it was "The value of
    useBean class attribute converter.conversionDAO is
    invalid". So far I found out that the coding for
    database connectivity purpose in conversionDAO.java
    cause the error. Another thing is Postgresql jdbc
    driver is required to set in the CLASSPATH for the
    java file to access the Postgresql database. I don't
    know where should I put it in Tomcat for web
    application. Anyway, I put it in
    $CATALINA_HOME/shared/lib according the book i
    refered. I do the database connectivity coding refer
    to the Tomcat Kick Start book from Sams Publishing.
    Below are the coding involved, please show me the
    mistake i had made. Thank you.
    ----server.xml----
    <Context path="/database"
    docBase="${catalina.home}/webapps/database" debug="0"
    reload="true">
    <ResourceParams name="jdbc/conversion">
    <parameter>
    <name>username</name>
    <value>myusername</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>mypassword</value>
    </parameter>
    <parameter>
    <name>driverClassName</name>
    <value>org.postgresql.Driver</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:postgresql://localhost/conversion</value>
    </parameter>
    </ResourceParams>
    </Context>
    ----web.xml----
    <servlet>
    <servlet-name>conversionDAO</servlet-name>
    <servlet-class>converters.conversionDAO</servlet-class>
    </servlet>
    <resource-ref>
    <res-ref-name>jdbc/conversion</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    ----conversionDAO.java----
    public conversionDAO() throws SQLException,
    NamingException
    Context init = new InitialContext();
    Context ctx = (Context)
    init.lookup("java:comp/env");
    DataSource ds = (DataSource)
    ctx.lookup("jdbc/conversion");
    con = ds.getConnection();
    select = con.prepareStatement(
    "SELECT rate FROM Exchange WHERE src= ? AND dst =

    Immediate HELP in Tomcat 5 to Postgresql 7.4 database connectivity problem (cont.)
    Errors log
    2004-06-06 01:07:53 StandardContext[servlets-examples]SessionListener: contextDestroyed()
    2004-06-06 01:07:53 StandardContext[servlets-examples]ContextListener: contextDestroyed()
    2004-06-06 01:07:53 StandardContext[jsp-examples]SessionListener: contextDestroyed()
    2004-06-06 01:07:53 StandardContext[jsp-examples]ContextListener: contextDestroyed()
    2004-06-06 01:07:59 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
    2004-06-06 01:08:00 StandardContext[jsp-examples]ContextListener: contextInitialized()
    2004-06-06 01:08:00 StandardContext[jsp-examples]SessionListener: contextInitialized()
    2004-06-06 01:08:00 StandardContext[servlets-examples]ContextListener: contextInitialized()
    2004-06-06 01:08:00 StandardContext[servlets-examples]SessionListener: contextInitialized()
    2004-06-06 01:08:01 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
    org.apache.jasper.JasperException: /rates/rates.jsp(5,0) The value for the useBean class attribute converters.conversionDAO is invalid.
         at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
         at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:357)
         at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:141)
         at org.apache.jasper.compiler.Generator$GenerateVisitor.visit(Generator.java:1217)
         at org.apache.jasper.compiler.Node$UseBean.accept(Node.java:1116)
         at org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
         at org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2213)
         at org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2219)
         at org.apache.jasper.compiler.Node$Root.accept(Node.java:456)
         at org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
         at org.apache.jasper.compiler.Generator.generate(Generator.java:3261)
         at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:244)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:422)
         at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:507)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:274)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
    ----more----

  • Database configuring problem in setup of managed systems in SMD

    Hello,
    i'm doing the setup of a CRM 5.0 in SMD Abap+Java and the setup results returns following:
    "Database configuration problem"  with the exception:
    java.lang.NullPointerException
         at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:114)
         at com.sap.smd.agent.plugins.database.ConfigurationTask.configureCustomProperties(ConfigurationTask.java:242)
         at com.sap.smd.agent.plugins.database.ConfigurationTask.configureProperties(ConfigurationTask.java:370)
         at com.sap.smd.agent.plugins.database.ConfigurationTask.execute(ConfigurationTask.java:124)
         at com.sap.sup.admin.setup.AppCfgTasks.configureDbApp(AppCfgTasks.java:115)
         at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:202)
         at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:217)
         at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:461)
         at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:26)
         at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:669)
         at java.lang.Thread.run(Thread.java:534)
    Anybody knows which can be the problem?
    Thanks a lot
    Carlos

    Hi Shriraj,
    ensure that the installation path is correct. I only put /urs/sap/<SID> and you must put /usr/sap/<SID>/DV***/.
    In my case with that the setup returns all in green.
    I hope it helps you
    Regards
    Carlos

  • Database connection problem when i try store the values in JTable

    Hi Sir,
    I have a database connection problem when i try to store the data's in a JTable.I think the problem is with in the database connection.I have used 3 vectors here.The database which i have used is
    Access.Where the program is compiling well.But when i run it only the first column heading is printed and error message showing that
    "Invalid Cursor State".I need to solve this problem.pls. do help me.
    I will provide u with the code.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import java.util.*;
    import java.sql.*;
    public class DataBaseVector extends JPanel
    //Container contentPane=getContentPane();
    JScrollBar jsb = new JScrollBar(JScrollBar.HORIZONTAL);
    JScrollBar jsb1 = new JScrollBar(JScrollBar.VERTICAL);
    Image i1;
    String url="jdbc:odbc:Ananth";
    Vector col=new Vector();
    Vector rows=new Vector();
    Vector rdata=new Vector();
    Connection conn;
    public DataBaseVector()
    //super("JTable With ScrollBars");
    this.setLayout(new BorderLayout());
    UIManager.put("ScrollBar.track",Color.red);
    UIManager.put("ScrollBar.thumb",Color.blue);
    try
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    conn=DriverManager.getConnection(url); // Is there any problem here?
    Statement st=conn.createStatement();
    ResultSet rs=st.executeQuery("Select * from AccountMaster");
    // rs is the result set obtained
    ResultSetMetaData rsmd=rs.getMetaData();
    int cols=rsmd.getColumnCount();
    for(int i=1;i<=cols;i++)
    col.addElement(rsmd.getColumnName(i));
    rdata.addElement(rs.getString(i));
    rows.addElement(rdata);
    }catch(Exception e)
         System.out.println("The Error Message was:"+e.getMessage());
    JTable jt=new JTable(rows,col);
    int v=ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED;
    int h=ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
    JScrollPane jsp=new JScrollPane(jt,v,h);
    this.add(jsp,BorderLayout.CENTER);
    this.add(jsb, BorderLayout.SOUTH);
    this.add(jsb1, BorderLayout.EAST);
    public static void main(String args[])
    JFrame jf=new JFrame();
    JPanel frame=new DataBaseVector();
    jf.getContentPane().add(frame);
    jf.setSize(800,600);
    jf.setVisible(true);
    Thanx,
    m.ananthu

    The problem is ResultSet.next() is not called.
    Try this and modify the table creation as you need.
    ResultSetMetaData rsmd=rs.getMetaData();
    int cols=rsmd.getColumnCount();
         while(rs.next()) {
              for(int i=1;i<=cols;i++)
                        col.addElement(rsmd.getColumnName(i));
                        rdata.addElement(rs.getString(i));
              rows.addElement(rdata);
    Hope this helps

  • WLI 7.0 samples database setup problem

    I have just installed WL Platform 7.0. I want to run the WLI samples and did the following:
    1. Started "Integration Database Wizard" for WLI samples and performed "SwitchDB"
    - provided valid database properties for oracle. Completed successfully - config.xml
    for samples is updated.
    2. Ran RunSamples script - Gives database connect problems and database is not created.
    The user/pwd/machine name/SID are all correct.
    I observed that as part of "RunSamples", it again invokes "SwitchDB" (command I see
    is "switchdb oracle"). This resets the database properties in config.xml to the defaults
    - so obviously this is causing the connection problem.
    Pls let me know what is going wrong here?
    Thanks

    Garf,
    You are correct in your analysis. When you run the 'RunSamples' script,
    it will call switchdb and this causes the 'defaults' to be set in
    config.xml. Running the wliconfig utility is the customer experience
    BEA would like to have with regard to setting up the database. However,
    the RunSamples script has not been updated to correctly reflect that the
    customer would have already performed this step. When RunSamples calls
    switchdb, it is getting the defaults from the following location:
    <USER_DEFINED_DOMAIN>/dbInfo/<DATABASE>/setDBVars and setDBVarsExt files
    So for example, if you accepted the default user directory and your
    BEA_HOME is C:/bea and you were using the EAI Domain template calling
    your domain eaidomain and your are using Oracle, you should update the
    following files:
    C:\bea\user_projects\eaidomain\dbInfo\oracle\setDBVars.cmd and
    setDBVarsExt.cmd
    Edit these files to reflect your DB connection properties.
    When RunSamples calls switchdb, these properties will be used to update
    the wliPool in config.xml. I hope this helps and sorry for the
    inconvenience.
    Cheers,
    Chris
    Garf wrote:
    I have just installed WL Platform 7.0. I want to run the WLI samples and did the following:
    1. Started "Integration Database Wizard" for WLI samples and performed "SwitchDB"
    - provided valid database properties for oracle. Completed successfully - config.xml
    for samples is updated.
    2. Ran RunSamples script - Gives database connect problems and database is not created.
    The user/pwd/machine name/SID are all correct.
    I observed that as part of "RunSamples", it again invokes "SwitchDB" (command I see
    is "switchdb oracle"). This resets the database properties in config.xml to the defaults
    - so obviously this is causing the connection problem.
    Pls let me know what is going wrong here?
    Thanks

  • Oracle Database Starting Problem

    Hi all,
    i am having database startup problems.
    my database is working fine but when i try to connect as sysdba then i get the following error
    Connected to an idle instance.
    SQL> select status from v$instance;
    select status from v$instance
    ERROR at line 1:
    ORA-01034: ORACLE not available
    i have also checked the listener and it is also working fine.
    Instance "orcl", status READY, has 3 handler(s) for this service...
    The process is also shown by the pmon command, check through operating system command
    ps -aef |grep pmon
    oracle 3235 2816 0 18:08:15 pts/3 0:00 grep pmon
    oracle 22425 1 0 12:01:57 ? 0:08 ora_pmon_orcl
    Please let me know what to do.
    regards,
    Imran Raza

    Hi Laura,
    Please find below
    bash-3.00$ echo $ORACLE_SID
    orcl
    bash-3.00$ ./lsnrctl status
    LSNRCTL for Solaris: Version 10.1.0.5.0 - Production on 17-FEB-2009 18:58:55
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=silverApp0)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Solaris: Version 10.1.0.5.0 - Production
    Start Date 17-FEB-2009 11:51:42
    Uptime 0 days 7 hr. 7 min. 13 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /oracle/dba/OraHome1/network/admin/listener.ora
    Listener Log File /oracle/dba/OraHome1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=silverApp0)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl.silverapp0.com" has 1 instance(s).
    Instance "orcl", status READY, has 3 handler(s) for this service...
    The command completed successfully

  • Database clustering techniques

    Can we cluster oracle database ?
    I am aware of clustering J2EE application servers . Wondering whether databases also can be clustered ? is it possible ?
    I read this ...
    +Use 5 load-balanced web servers,3 application servers & 2 database servers. Use server & database clustering techniques+
    does oracle have database clustering techniques to provide high dense data ?

    You may have a look at my brief summary about Oracle Database HA Solutions here:
    http://uhesse.wordpress.com/oracle-database-ha-architecture/
    There is also a lot information about Database HA from Oracle Corp. on the web available. Take this as a starting point:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17157/toc.htm
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • Clustering problems and load balancing question

              I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
              machines, 2 App. Server machines and one database server machine. I have defined
              one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
              so it should be when I fix my problems!
              My questions/problems are the following:
              1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
              clusters? That is, the client-simulator machines send the requests to the software
              dispatcher which performs workload balancing between the 2 Weblogic clusters. The
              clusters perform round-robin amongst all instances. Note that the documentation only
              talks about Hardware Balancing.
              2. I am having problems with my multicast IP addresses. For instance, on one App.
              Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
              I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
              Time Out". I have used the utils.MulticastTest utility which shows the packets not
              being received:
              I (S1) sent message num 1
              I (S1) sent message num 2
              I (S1) sent message num 3
              I (S1) sent message num 4
              What am I doing wrong?
              3. Re. the cluster configuration:
              NOTE: I have executed my workload using 2 independent App. Server machines with a
              software dispatcher - no clustering. Each App. Server used a jdbc connection pool
              of 84 database connections. The db connections happened to become my bottleneck.
              When I tried to increase the number of connections in the jdbc pool, throughput decreased
              dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
              of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
              not been that simple a task - probably because I am totally new to the Web Application
              Server world!
              Here is what I've got so far:
              I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
              I wish to run within the cluster. All servers in the cluster use port number 80.
              There is a corresponding DNS entry for each IP address. My base assumption is that
              one of these instances will double up as the Administration Server... Is it true,
              or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
              (each with a connection pool of 84 database connections for a total of 252 database
              connections)?
              Do I need to re-deploy my applications for the cluster? And if so, would this explain
              why I am having problem starting my Admin Server?
              I think this is it for now. Any help will be greatly appreciated!
              Thanks in advance,
              Guylaine.
              

              Guylaine Cantin wrote:
              > I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
              > machines, 2 App. Server machines and one database server machine. I have defined
              > one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
              > so it should be when I fix my problems!
              >
              > My questions/problems are the following:
              >
              > 1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
              > clusters? That is, the client-simulator machines send the requests to the software
              > dispatcher which performs workload balancing between the 2 Weblogic clusters. The
              > clusters perform round-robin amongst all instances. Note that the documentation only
              > talks about Hardware Balancing.
              >
              We also support software load balancers (for e.g. resonate)
              The software dispatcher should be intelligent enough to decode the
              cookie and route the request to the appropriate servers. This is
              necessary to maintain sticky load balancing.
              > 2. I am having problems with my multicast IP addresses. For instance, on one App.
              > Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
              > I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
              > Time Out". I have used the utils.MulticastTest utility which shows the packets not
              > being received:
              >
              > I (S1) sent message num 1
              > I (S1) sent message num 2
              > I (S1) sent message num 3
              > I (S1) sent message num 4
              > ...
              >
              > What am I doing wrong?
              >
              You should run the above utility from multiple windows and see if each
              of them being recognized or not.
              i.e. java utils.MulticastTest -N S1 -A 239.0.0.1
              java utils.MulticastTest -N S1 -A 239.0.0.1
              > 3. Re. the cluster configuration:
              >
              > NOTE: I have executed my workload using 2 independent App. Server machines with a
              > software dispatcher - no clustering. Each App. Server used a jdbc connection pool
              > of 84 database connections. The db connections happened to become my bottleneck.
              > When I tried to increase the number of connections in the jdbc pool, throughput decreased
              > dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
              > of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
              > not been that simple a task - probably because I am totally new to the Web Application
              > Server world!
              >
              You have to stress test your application several times and set
              maxCapacity of the conn pool accordingly.
              > Here is what I've got so far:
              >
              > I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
              > I wish to run within the cluster. All servers in the cluster use port number 80.
              > There is a corresponding DNS entry for each IP address. My base assumption is that
              > one of these instances will double up as the Administration Server... Is it true,
              > or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
              > (each with a connection pool of 84 database connections for a total of 252 database
              > connections)?
              BEA recommends to use Admin server for administrative tasks only
              like configuring new deployments, jdbc conn pools, adding users etc..
              It's not a good idea to have admin server part of cluster.
              >
              > Do I need to re-deploy my applications for the cluster? And if so, would this explain
              > why I am having problem starting my Admin Server?
              >
              You have to target all your apps to the Cluster.
              > I think this is it for now. Any help will be greatly appreciated!
              >
              > Thanks in advance,
              >
              > Guylaine.
              >
              

  • Database creation problem on Windows XP

    Hello Readers
    I have installed ORACLE Database Engine on windows XP.
    I am facing problem in database creation.
    I have tryed wizard as well as mannual method.
    in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
    although CD drive is in CR Rom drive.
    Please help me ....
    Rashid Masood Ashraf
    email: [email protected]

    After going to the properties as you suggested:
    Right now the Obtain an IP address automatically is checked
    I need to check the Use the following IP address:
    What should I enter for
    IP address:
    Subnet mask:
    Default gateway:
    Please help.
    Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

  • Database Connection Problem in Oracle9i Lite Web-to-Go

    Hi
    I am having problem in the Database Connectivity. I am using the OracleDriver class for the connection and have defined the DataSource in the struts-config.xml as
    <data-sources>
    <data-source>
    <set-property property="driverClass"
    value="oracle.jdbc.driver.OracleDriver" />
    <set-property property="url"
    value="jdbc:oracle:thin:@192.50.200.201:1521:WEBTOGO.WORLD" />
    <set-property property="maxCount"
    value="5"/>
    <set-property property="minCount"
    value="1"/>
    <set-property property="user"
    value="master"/>
    <set-property property="password"
    value="ramchow"/>
    </data-source>
    </data-sources>
    But when I am trying to do any database transaction it is throwing the following exception..
    log9: [ERROR] ActionServlet - -Initializing application data source org.apache.s
    truts.action.DATA_SOURCE <java.sql.SQLException: Io exception: Connection refuse
    d(DESCRIPTION=(TMP=)(VSNNUM=153093120)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505
    )(EMFI=4))))>java.sql.SQLException: Io exception: Connection refused(DESCRIPTION
    =(TMP=)(VSNNUM=153093120)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
    at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:361)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
    va:442)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:321)
    at org.apache.struts.legacy.GenericDataSource.createConnection(GenericDa
    taSource.java:805)
    at org.apache.struts.legacy.GenericDataSource.open(GenericDataSource.jav
    a:741)
    at org.apache.struts.action.ActionServlet.initModuleDataSources(ActionSe
    rvlet.java:1085)
    at org.apache.struts.action.ActionServlet.init(ActionServlet.java:472)
    at javax.servlet.GenericServlet.init(GenericServlet.java:258)
    at oracle.lite.web.JupServlet.createInstance(JupServlet.java:349)
    at oracle.lite.web.JupServlet.getServlet(JupServlet.java:322)
    at oracle.lite.web.JupServlet.service(JupServlet.java:216)
    at oracle.lite.web.AppServletHandler.handle(AppServletHandler.java:297)
    at oracle.lite.web.JupApplication.service(JupApplication.java:550)
    at oracle.lite.web.JupHandler.handle(JupHandler.java:109)
    at oracle.lite.web.HTTPServer.process(HTTPServer.java:306)
    at oracle.lite.web.HTTPServer.handleRequest(HTTPServer.java:162)
    at oracle.lite.web.JupServer.handle(JupServer.java:310)
    at oracle.lite.web.SocketListener.process(SocketListener.java:172)
    at oracle.lite.web.SocketListener$ReqHandler.run(SocketListener.java:226
    log9: javax.servlet.UnavailableException: Initializing application data source o
    rg.apache.struts.action.DATA_SOURCE
    log9: at org.apache.struts.action.ActionServlet.initModuleDataSources(ActionSe
    rvlet.java:1091)
    log9: at org.apache.struts.action.ActionServlet.init(ActionServlet.java:472)
    log9: at javax.servlet.GenericServlet.init(GenericServlet.java:258)
    log9: at oracle.lite.web.JupServlet.createInstance(JupServlet.java:349)
    log9: at oracle.lite.web.JupServlet.getServlet(JupServlet.java:322)
    log9: at oracle.lite.web.JupServlet.service(JupServlet.java:216)
    log9: at oracle.lite.web.AppServletHandler.handle(AppServletHandler.java:297)
    log9: at oracle.lite.web.JupApplication.service(JupApplication.java:550)
    log9: at oracle.lite.web.JupHandler.handle(JupHandler.java:109)
    log9: at oracle.lite.web.HTTPServer.process(HTTPServer.java:306)
    log9: at oracle.lite.web.HTTPServer.handleRequest(HTTPServer.java:162)
    log9: at oracle.lite.web.JupServer.handle(JupServer.java:310)
    log9: at oracle.lite.web.SocketListener.process(SocketListener.java:172)
    log9: at oracle.lite.web.SocketListener$ReqHandler.run(SocketListener.java:226.
    Can anybody guide me what can be the problem asap.
    regards
    ramchow

    Ramesh,
    This looks like it might be a Java class mismatch error. Do you have multiple versions of Java installed on your machine? If so, you may want to keep one version and remove the rest.
    If you're already running just one version, you may want to check the registry and classpath for references to multiple Java versions, or version that no longer exist.
    Please let me know if you have additional questions.
    Junius

  • JDeveloper 10.1.3.2.0 and database 11g, problem in JDBC ?

    We developed our j2ee application (using hibernate) for some time. Now we came to newer Oracle database 11g and have problem - endless waiting for fetched data. I think, that problem is in JDBC version.
    Adding new JDBC into project as new library and placing it 'before' the old one doesn't help. Btw. hibernate gets connection from applicationContext_dataSource.xml file and is defined for example like this
    <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close">
    <property name="driverClassName" value="oracle.jdbc.driver.OracleDriver"/>
    <property name="url" value="jdbc:oracle:thin:@host:port:SID"/>
    <property name="username" value="name"/>
    <property name="password" value="password"/>
    </bean>
    It has nothing to do with defined conections.
    My question is this:
    - Can I upgrade JDBC in our 10.1.3.2.0 JDeveloper to new version or latest version of JDeveloper is needed ?
    Thanks.
    Message was edited by:
    jnejedly

    The OC4J server embedded in JDeveloper 11g does not support JDBC 4.0.
    Java applications using the JDBC 4.0 driver may be developed in JDeveloper 11g.

  • Image reclaim from database ,facing problem

    I am very much new in Flex development.........
    I am facing a problem from  quite a few days to  reclaim  a image from the database with the help of servlet to a flex application .  I am  using HttpRequest Object not  Blaze Ds.
    Actually image byte stream is comming back from Servlet to Flex   End  , but when I want to display it , then it shows the place of the image as black .I think image pixel's are not combining togather ..........Have you any Idea?
    I am trying in  the following way.......... this is in the result handler method................
    private function getPhotoResultHandler(event:ResultEvent):void{
                   try{                     
                              xmldata1=event.result as XML;   
                              mx.control.alert.show(xmldata1.toString);        //  Here I can see the  byte stream  in the browser                                                          
                              var byteData : ByteArray;                                                                                            
                              var dec : Base64Decoder  = new Base64Decoder();              
                              dec.decode(xmldata1.toString());                 
                              byteData = dec.toByteArray();                     
                              imggetPhoto.source=byteData;  
                catch( ex : Error )
              Alert.show( ex.message );

    Hi,
    I use Forms 6i to save and retrieve image in BLOB column without problems.
    Some weeks ago, my column was long raw and I update it without problems. Nothing to do in Forms and juste modifiy query and recompile in Reports.

  • JControl.exe does not start...Database Initialisation Problem...MS SQL

    Hi,
    I was wondering if anyone has any idea on why JCONTROL.exe does not start. I am currently installing NW04s EP7. The DB is on another host and te SCS and CI are on a different host. I am going throught the installation when I get the following error fro the Bootstrap file.
    I have already done the following steps:
    1. entered the SAP<SID>DB password
    2. SQL is started and running on the second host.
    3. The bootstrap.propeties files look the same as any other file EP system on our network
    [Mar 7, 2007 5:32:35 PM  ] [Bootstrap module]> Problem occurred while performing synchronization.
    [Mar 7, 2007 5:35:45 PM  ] -
    [Mar 7, 2007 5:35:45 PM  ] Bootstrap MODE:
    [Mar 7, 2007 5:35:45 PM  ] <INSTANCE GLOBALS>
    [Mar 7, 2007 5:35:45 PM  ]  determined by parameter [ID0117060].
    [Mar 7, 2007 5:35:45 PM  ] -
    [Mar 7, 2007 5:35:46 PM  ] Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
    PC04315\sapmnt\ET1\SYS\global\security\lib\tools
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:212)
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
         at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    [Mar 7, 2007 5:35:46 PM  ] [Bootstrap module]> Problem occurred while performing synchronization.
    Many thanks,
    Adil Zafar

    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
    PC04315\sapmnt\ET1\SYS\global\security\lib\tools
    Do you have strong encryption on your current system?

Maybe you are looking for