Database Configuration Assistant fails during instalation of Oracle EE 8.1.7

My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre

some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny

Similar Messages

  • Database Configuration Assistant Failed During 9i Installation

    Database Configuration Assistant failed during my 9i Installation due to lack of disk space. I had 4MG allocated on /apps and the application used 3.1GB. I now do not have the required 1GB for the seed database. Actually, I want to create the seed database on /oradata, not on /apps. Does anyone know how I can create that seed database in /oradata? I don't believe I was prompted for where to create that seed database. Also, how can I run the Database Configuration Assistant again? Typing the command dbca told me to set the DISPLAY environment variable and re-run.
    Thanks in advance for any help you can give.
    Veronica

    I had java.lang.NoClassDefFoundError too.
    This was fixed by having DISPLAY setting
    #export DISPLAY=host:0.0
    Make sure your x window system is working Ok.
    I also used unset LANG

  • Database Configuration Assistant fails during installation Oracle EE 8.1.7

    My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (for Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
    HELP, HELP!!!
    Cheers,
    Andre

    some good installation guides to check out:
    http://www.akadia.com/services/ora_linux_install_901.html
    http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
    good luck!
    Jenny

  • Agent Configuration Assistant Failed during install

    At the end of Oracle 9i installation, the Agent Configuration Assistant failed with
    Parameter"orahome"=/opt/oracle/product/9.2.0
    Parameter"nodeinfo"=NO_VALUE
    I'm installing Oracle 9i on a Sun sparc ultra 10 with 1 gig of RAM running Solaris 9.
    Any help is much appreciated,
    Lucas

    Thanks for the prompt reply, Joel. I did follow the install instruction. My /etc/system consists of:
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=100
    set shmsys:shminfo_shmseg=10
    set semsys:seminfo_semmns=1024
    set semsys:seminfo_semmni=100
    set noexec_user_stack = 1
    set noexec_user_stack_log = 1
    set sys:coredumpsize = 0
    My .profile consists of:
    ORACLE_BASE=/opt/oracle; export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/product/9.2.0; export ORACLE_HOME
    ORACLE_SID=solaris; export ORACLE_SID
    ORACLE_TERM=xterm; export ORACLE_TERM
    TNS_ADMIN=/export/home/oracle/config/9.2.0; export TNS_ADMIN
    NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
    ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data; export ORA_NLS33
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/openwin/lib
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/dt/lib:/usr/ucblib:/usr/local/lib
    export LD_LIBRARY_PATH
    # Set up the search paths:
    PATH=$PATH:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/local/bin::/opt/NSCPnav/bin:$ORACLE_HOME/bin:/usr/ccs/bin:/opt/local/GNU/bin:/usr/local/samba/bin:/usr/ucb:.
    export PATH
    # CLASSPATH must include the following JRE location(s):
    CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
    CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib

  • OMS configuration assistant failed during install OEM 10gR2

    I'm installing OEM Grid control 10g R2 using new database. Everything ran smoothly till OMS configuration assistant was kicked off. All other configuration tools ran before this one were succeeded.
    When OMS configuration tool started, it hung there for a long time, so I "stop" and "retry" it, got message in detail box" /usr/oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same."
    In "configToolFailedCommands" file, showing "oracle.sysman.emcp.agent.AgentPlugIn".
    I tried to "stop" and "retry", machine was frozen. What can I do now?
    Please help. I'm stuck here.
    Thanks in advance!

    The configuration failed again.
    I stopped 9i listener (we have 9i dbs on same server) then ran OMS configuration tool from command line like this:
    cd /usr/oracle/OracleHomes/oms10g/oui/bin
    ./runConfig.sh ORACLE_HOME=/usr/oracle/OracleHomes/oms10g ACTION=Configure MODE=PerformPerform - mode is starting for action: Configure
    Perform - mode finished for action: Configure
    You can see the log file: /usr/oracle/OracleHomes/oms10g/cfgtoollogs/oui/configActions2007-05-15_01-50-02-PM.log
    The content of above log is: ###################################################
    The action configuration is performing
    The plug-in OMS Configuration is running
    Operation Stopping OPMN Processes is in progress.
    Operation EM Deploying is in progress.
    Operation Unlocking Passwords and Out of Box setup is in progress.
    The plug-in OMS Configuration has failed its perform method
    The action configuration has failed its perform method
    Since it failed, I checked <OMS_HOME>/cfgtoollogs/cfgfw/oracle.sysman.top.oms_<Timestamp>.log, saw the following:
    WARNING: oracle.sysman.top.oms:getConnection::Connection refused://astham:1521/oemtest:Exception=Io exception: The Network Adapter could not establish the connection
    INFO: oracle.sysman.top.oms:Failed to connect to Database for:SYS, sysPwd=******, connectString=//astham:1521/oemtest. ConnectException=Io exception: The Network Adapter could not establish the connection
    WARNING: oracle.sysman.top.oms:Failed to initialize JDBC Connection
    INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on
    an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
    INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
    IN THIS CASE, WHAT CAUSED THE FAILURE? HOW TO FIX? PLEASE ADVISE! THANKS!!!

  • Agent Configuration Assistant failed during installation of Oracle 9i

    Hi,
    Currently having problem with installing Oracle 9i R2 (9.2.0.4) on Redhat. Am getting this error:
    Parameter "orahome" = /apps/oracle/product/9.2.0.4/db_1
    Parameter "nodeinfo" = NO_VALUE
    Agent Service Failed
    Does anyone has a solution on this?
    Thanks,
    JayArr

    Lets start with the basics. There is no such thing as Oracle 9i.
    Yes I know Oracle years ago used it as a marketing label but to help you we need the exact version to 3 decimal places.
    Either way the version you are just now installing is so old it will be unsupported? Why are you installing Neolithic software?
    And finally ... What agent? What agent configuration? What does an agent have to do with a 9i installation on XP?
    The more specific you are, and the clearer your description, the more likely you will get help. Though why you are installing something so old escapes me at the moment. <g>

  • Database Configuration Assistant fails during 9i installation

    Hello!
    I'm a student and totaly new to oracle. I have tried to install the 9.2 version, but there were a message during installation that the OracleMTSRecoveryService made problems. I sad "retry" and no more messages appeared, but after the installation the installer says the dbca could not be installed. The error message is:
    java.lang.NoClassDefFoundError: oracle/sysman/emSDK/common/nls/MessageBundle
         at
         at oracle.sysman.assistants.util.step.StepContext.<init>(StepContext.java:121)
         at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:454)
         at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:185)
         at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.<init>(ProgressOnlyHost.java:89)
         at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:137)
         at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:85)
         at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
    Exception in thread "main"
    Please help, I have been searching for hours to find a solution but without success!

    I had java.lang.NoClassDefFoundError too.
    This was fixed by having DISPLAY setting
    #export DISPLAY=host:0.0
    Make sure your x window system is working Ok.
    I also used unset LANG

  • Problem during installation oracle database configuration assistant FAILED

    Hi Dear,
    The Configurations are :
    VM OS : Oracle enterprise linux 5
    Trying to install : Oracle 11g R1
    I'm having a real problem , so i can't continue my installation during the configuration assistant, oracle net configuration assistant was succeeded but oracle database configuration assistant FAILED
    Here is the long message showed by console :
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /u01/app/oracle/product/11.1.0/db_1/bin/netca /orahome /u01/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
    Parsing command line arguments:
    Parameter "orahome" = /u01/app/oracle/product/11.1.0/db_1
    Parameter "orahnam" = OraDb11g_home1
    Parameter "instype" = typical
    Parameter "inscomp" = client,oraclenet,javavm,server,ano
    Parameter "insprtcl" = tcp
    Parameter "cfg" = local
    Parameter "authadp" = NO_VALUE
    Parameter "nodeinfo" = NO_VALUE
    Parameter "responsefile" = /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
    Done parsing command line arguments.
    Oracle Net Services Configuration:
    Profile configuration complete.
    Listener started at port:1521
    Oracle Net Listener Startup:
    Running Listener Control:
    /u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl start LISTENER
    Listener Control complete.
    Listener started successfully.
    Listener configuration complete.
    Oracle Net Services configuration successful. The exit code is 0
    Configuration assistant "Oracle Net Configuration Assistant" succeeded
    Output generated from configuration assistant "Oracle Database Configuration Assistant":
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant":
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
    Please help me it's urgently

    Please help me i can't find any solution to resolve this trouble
    Should i uninstall this version or what exactly, could you please suggest to me something like another release who matches that configuration
    Sorry but i have no idea
    Waiting for the response

  • Agent Configuration Assistant fails on install  (linux AS 4/Oracle 9.2.0.4)

    Agent Configuration Assistant fails on install of oracle 9.2.0.4 Database Enterprises Edition On Linux AS 4
    Parameter "orahome" = /home/oracle/OraHome1
    Parameter "nodeinfo" = NO_VALUE
    Agent Service Failed
    System Configuration 512RAM 40 GB HDD 3.0 GHz
    /etc/hosts File Specification
    127.0.0.1 rd.hp.com rd localhost.localdomain localhost

    You can to verify if you have a problem with the firewall. Run the next comands
    Execute CMD and run
    telnet hostname XXXX ------------> where XXXX is the AGENT PORT . This port its configure in the emd.properties file. This file is in the AGENT_DIRECTORY\sysman\config\
    If you dont execute a telnet to this port, you have a firewall problem
    Regards

  • Oracle 11g "Oracle Database Configuration Assistant" failed

    Hi
    am trying to install oracle 10g databse .
    am getting Configuration assistant "Oracle Database Configuration Assistant" failed
    in log file i see
    [Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-19] [18:32:29:343] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    i have created microsoft loop back adapator and configured TCP/IP.
    what would be the problem?

    At the Oracle Support site https://support.oracle.com
    To access the document, you will need a valid CSI (Customer Support Identifier), which is given when you purchase a support contract from Oracle.
    If you do not have a CSI, I would recommend that you completely uninstall the product and reinstall again by following the Install Guide at http://www.oracle.com/pls/db102/portal.portal_db?selected=11
    HTH
    Srini

  • Configuration assistant "Oracle Database Configuration Assistant" failed

    I install oracle 10g on HP UX 11.23. I got this error :
    hecking for PHSS_33278; found Not found.     Failed <<<<
    Checking for PHSS_33279; found Not found.     Failed <<<<
    Checking for PHSS_33277; found Not found.     Failed <<<<
    Checking for PHSS_33279; found Not found.     Failed <<<<
    , my first question :
    can i pass this step, ?
    after all, my installation form is okey, but everything change become nightmare.
    I installation failed on Configuration Assistant :
    Configuration assistant "Oracle Database Configuration Assistant" failed
    OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
    1. check the details panel on the configuration assistant screen to see the error resulting in the failures
    2. fix the errors causing these failures
    3. select the failed assistants and click the retry button to retry the
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

    But i still get this error. Do you have solution for this ?
    I installation failed on Configuration Assistant :+
    Configuration assistant "Oracle Database Configuration Assistant" failed+
    OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
    *1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
    *2. fix the errors causing these failures*
    *3. select the failed assistants and click the retry button to retry the*
    Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
    Edited by: user9198604 on Feb 25, 2010 3:37 AM

  • [INS-20802] Oracle Database Configuration Assistant failed

    I am trying to install Oracle 11g R2 on my windows 7 Professional, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
    And the final pop up winow says:
    Database configuration Assistant:Info
    *"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
    *"[INS-20802] Oracle Database Configuration Assistant failed"*
    Details:
    Cause:- The plug-in failed in its perform method
    Action:- Refer to the logs or contact Oracle Support Services.
    Following are the last few lines of the log file. Can anyone please help me to fix this problem?
              Oracle Advanced Security 11.2.0.1.0
              Oracle Internet Directory Client 11.2.0.1.0
              HAS Files for DB 11.2.0.1.0
              Oracle Net Listener 11.2.0.1.0
              Oracle Net Services 11.2.0.1.0
              Oracle Text 11.2.0.1.0
              Oracle Database 11g 11.2.0.1.0
              Oracle COM Automation Feature 11.2.0.1.0
              Oracle OLAP 11.2.0.1.0
              Oracle Spatial 11.2.0.1.0
              Oracle Partitioning 11.2.0.1.0
              Enterprise Edition Options 11.2.0.1.0
              Oracle Database 11g 11.2.0.1.0
    INFO: OiicSaveInvWCCE:After saving the inventory. This is an Install session.
    INFO: SaveInvWCCE JRE files in Scratch :0
    INFO: Aggregate Name as given in the action for additional utility tools: oracle.rdbms.util
    INFO: Aggregate Location as given in the action for additional utility tools: C:\app\User\product\11.2.0\dbhome_1/install/config
    INFO: checking if the file C:\app\User\product\11.2.0\dbhome_1/install/config\oracle.rdbms.util.xml is present?
    INFO: Can proceed with additional utility processes ? : true
    INFO: Copying C:\app\User\product\11.2.0\dbhome_1\install\config\oracle.rdbms.util.xml to C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.rdbms.util.1_0_0_0_0.xml with the permissions og-rwx
    INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.rdbms.util instancePath: inventory\ContentsXML\ConfigXML\
    INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.rdbms.util] instancePath: inventory\ContentsXML\ConfigXML\
    INFO: No of Tools: 1
    INFO: Starting to execute the additional tools
    INFO: Executing utility tool: ADR Setup Utility
    INFO: Executing utility tool: ADR Setup Utility
    INFO: Command = C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1/bin/diagsetup.bat basedir=C:\app\User oraclehome=C:\app\User\product\11.2.0\dbhome_1
    INFO: Successfully executed utility tool: ADR Setup Utility
    INFO: Successfully executed utility tool: ADR Setup Utility
    INFO: All the tools have been executed Successfully
    INFO: Complete execution of additional tools
    INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
    INFO: Config Initialize JRE files in Scratch :0
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Configuration Manager
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: HAS Common Files
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Netca Client
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
    INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
    INFO: Copying Aggr XML for: Oracle Database 11g
    INFO: The Top level Aggreage File = C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.server.11_2_0_1_0.xml
    INFO: OUI_CAPlugIn is not found in XML
    INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
    INFO: processing tool: Launch browser
    INFO: removing plugin invocation for: Launch browseras it doesnt support clone mode
    INFO: removing plugin invocation for: Launch browseras it doesnt support add node mode
    INFO: Namespace prefix 'agg' used but not declared.
    INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.server instancePath: inventory\ContentsXML\ConfigXML\
    INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.server] instancePath: inventory\ContentsXML\ConfigXML\
    INFO: aggr ref length : 6
    INFO: cf session hashcode: 1847125318
    INFO: cf session saved with key: OraDb11g_home1 oracle.server
    INFO: cf session is ok
    INFO: created and saved cf session for oh: OraDb11g_home1
    INFO: passing params to cf
    INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
    INFO: This variable s_OPSNodeInfoString is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_createResponseFile is not added to the global context map
    INFO: This variable s_ps is not added to the global context map
    INFO: This variable s_oraName is not added to the global context map
    INFO: This variable s_ccrJarDestination is not added to the global context map
    INFO: This variable b_localInstall is not added to the global context map
    INFO: This variable b_doConfigCCR is not added to the global context map
    INFO: This variable b_ccrUpgrade is not added to the global context map
    INFO: This variable s_rspFilePath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: for oracle.has.common no aggregate found by cf: no configuration
    INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
    INFO: This variable s_swingallName is not added to the global context map
    INFO: This variable s_shareName is not added to the global context map
    INFO: This variable s_runtimeLib is not added to the global context map
    INFO: This variable s_runTimeJar is not added to the global context map
    INFO: This variable s_responseFileName is not added to the global context map
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_netcfgName is not added to the global context map
    INFO: This variable s_netcahelpName is not added to the global context map
    INFO: This variable s_netcaUpgradeFlag is not added to the global context map
    INFO: This variable s_netcaClass is not added to the global context map
    INFO: This variable s_netCA_Args is not added to the global context map
    INFO: This variable s_netCAInstalledProtocols is not added to the global context map
    INFO: This variable s_netAPIName is not added to the global context map
    INFO: This variable s_ldapclnt9 is not added to the global context map
    INFO: This variable s_ldapclnt11 is not added to the global context map
    INFO: This variable s_ldapclnt10 is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable s_jreJarFile is not added to the global context map
    INFO: This variable s_jreJar is not added to the global context map
    INFO: This variable s_jewtName is not added to the global context map
    INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
    INFO: This variable s_icebrowserName is not added to the global context map
    INFO: This variable s_helpName is not added to the global context map
    INFO: This variable s_ewtcompatName is not added to the global context map
    INFO: This variable s_ewtName is not added to the global context map
    INFO: This variable s_ewtFile is not added to the global context map
    INFO: This variable s_ewtCompat is not added to the global context map
    INFO: This variable s_cfgMethod is not added to the global context map
    INFO: This variable s_caHelpZhTwJar is not added to the global context map
    INFO: This variable s_caHelpZhCnJar is not added to the global context map
    INFO: This variable s_caHelpPtBRJar is not added to the global context map
    INFO: This variable s_caHelpKoJar is not added to the global context map
    INFO: This variable s_caHelpJar is not added to the global context map
    INFO: This variable s_caHelpJaJar is not added to the global context map
    INFO: This variable s_caHelpItJar is not added to the global context map
    INFO: This variable s_caHelpFrJar is not added to the global context map
    INFO: This variable s_caHelpEsJar is not added to the global context map
    INFO: This variable s_caHelpDeJar is not added to the global context map
    INFO: This variable s_authAdaptors is not added to the global context map
    INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
    INFO: This variable b_net8ServerInstalling is not added to the global context map
    INFO: This variable b_javavmIsInstalling is not added to the global context map
    INFO: This variable b_isWindows is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_cmanIsInstalling is not added to the global context map
    INFO: This variable b_anoIsInstalling is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibDir is not added to the global context map
    INFO: This variable s_opsmJlib is not added to the global context map
    INFO: This variable s_ntwkTools is not added to the global context map
    INFO: This variable s_netjlibDir is not added to the global context map
    INFO: This variable s_netcahelpLocation is not added to the global context map
    INFO: This variable s_netcaJlibDir is not added to the global context map
    INFO: This variable s_netcaDocDir is not added to the global context map
    INFO: This variable s_netPropertiesFile is not added to the global context map
    INFO: This variable s_netCA is not added to the global context map
    INFO: This variable s_net8caFileToInstantiate is not added to the global context map
    INFO: This variable s_jre15Location is not added to the global context map
    INFO: This variable s_jlibDir is not added to the global context map
    INFO: This variable s_inventoryPrereqOui is not added to the global context map
    INFO: This variable s_emdwLibDir is not added to the global context map
    INFO: This variable s_caHelpDir is not added to the global context map
    INFO: This variable s_assistantJlibDir is not added to the global context map
    INFO: This variable s_JavaFlag is not added to the global context map
    INFO: This variable b_isOPS is not added to the global context map
    INFO: This variable s_windowsCommandLine is not added to the global context map
    INFO: This variable s_net8caExecutable is not added to the global context map
    INFO: This variable s_netcaUserDirArg is not added to the global context map
    INFO: This variable s_installTypeForNetCA is not added to the global context map
    INFO: This variable s_netcaSilentFlag is not added to the global context map
    INFO: This variable s_netCAInstalledProducts is not added to the global context map
    INFO: This variable s_netcaClasspath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
    INFO: This variable s_sid is not added to the global context map
    INFO: This variable s_serverInstallType is not added to the global context map
    INFO: This variable s_platform is not added to the global context map
    INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
    INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_nlsLang is not added to the global context map
    INFO: This variable s_emailServer is not added to the global context map
    INFO: This variable s_emailAddress is not added to the global context map
    INFO: This variable s_cfgtyperet is not added to the global context map
    INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable n_uploadInterval is not added to the global context map
    INFO: This variable localhost is not added to the global context map
    INFO: This variable b_launchTools is not added to the global context map
    INFO: This variable b_launchBrowser is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_centralConsole is not added to the global context map
    INFO: This variable USE_HTTP_PROXY is not added to the global context map
    INFO: This variable USE_DB_CONSOLE is not added to the global context map
    INFO: This variable SET_CONSOLE_MODE is not added to the global context map
    INFO: This variable SA_SETUP is not added to the global context map
    INFO: This variable OC4JLOC is not added to the global context map
    INFO: This variable NO_PC_MODE is not added to the global context map
    INFO: This variable LOGGING_LEVEL is not added to the global context map
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: Handling the storing of variables for aggr name oracle.assistants.server
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable pn_dboffset is not added to the global context map
    INFO: This variable cs_swingName is not added to the global context map
    INFO: This variable cs_komodoName is not added to the global context map
    INFO: This variable cs_kodiakName is not added to the global context map
    INFO: This variable cs_jewtName is not added to the global context map
    INFO: This variable cs_iceBrowserName is not added to the global context map
    INFO: This variable cs_ewtcompatName is not added to the global context map
    INFO: This variable cs_ewtName is not added to the global context map
    INFO: This variable cs_baliShareName is not added to the global context map
    INFO: This variable b_orabaseContainsOrahome is not added to the global context map
    INFO: This variable b_isWINDOWS is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
    INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibLocation is not added to the global context map
    INFO: This variable s_oratabLocation is not added to the global context map
    INFO: This variable s_opsmLocation is not added to the global context map
    INFO: This variable s_dbuaLocation is not added to the global context map
    INFO: This variable s_dbcaLocation is not added to the global context map
    INFO: This variable s_OracleBinLocation is not added to the global context map
    INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
    INFO: This variable s_dbcaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = C:\app\User\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 0
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\app\User\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@5059a331
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@2ce90f2d
    INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Created config job for Oracle Net Configuration Assistant
    INFO: Created config job for Oracle Database Configuration Assistant
    INFO: Created config job for Oracle Configuration Manager Configuration
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
    INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
    INFO: Entering ConfigClient.executeToolsInAggregate method
    INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@74247cc2
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: INFO: Parsing command line arguments:INFO: Parameter "orahome" = C:\app\User\product\11.2.0\dbhome_1INFO: Parameter "orahnam" = OraDb11g_home1INFO: Parameter "instype" = typicalINFO: Parameter "inscomp" = client,oraclenet,javavm,server,anoINFO: Parameter "insprtcl" = tcp,nmpINFO: Parameter "cfg" = localINFO: Parameter "authadp" = NO_VALUEINFO: Parameter "responsefile" = C:\app\User\product\11.2.0\dbhome_1\network\install\netca_typ.rspINFO: Parameter "silent" = trueINFO: Done parsing command line arguments.INFO: Oracle Net Services Configuration:INFO: Profile configuration complete.INFO: Oracle Net Listener Startup:INFO: Running Listener Control:
    INFO: C:\app\User\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENERINFO: Listener Control complete.INFO: Setting Listener service to start automatically.INFO: Listener started successfully.INFO: Listener configuration complete.INFO: Default local naming configuration complete.INFO: Oracle Net Services configuration successful. The exit code is 0WARNING:
    INFO:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO:
    INFO:
    INFO: Started Plugin named: Oracle Database Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Database Configuration Assistant'
    INFO: Starting 'Oracle Database Configuration Assistant'
    INFO: Executing DBCA
    INFO: Command C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1\bin\dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl.168.2.5 -emConfiguration LOCAL -storageType FS -datafileDestination C:\app\User\oradata -datafileJarLocation C:\app\User\product\11.2.0\dbhome_1/assistants/dbca/templates -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -automaticMemoryManagement true -totalMemory 3237 -maskPasswords false -oui_internal
    INFO: ... GenericInternalPlugIn.handleProcess() entered.
    INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
    INFO: ... GenericInternalPlugIn: checking secretArguments.
    INFO: ... GenericInternalPlugIn: starting read loop.
    INFO: Read: SYS_PASSWORD_PROMPT
    INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
    INFO: Read: SYSTEM_PASSWORD_PROMPT
    INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
    INFO: Read: DBSNMP_PASSWORD_PROMPT
    INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
    INFO: Read: SYSMAN_PASSWORD_PROMPT
    INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
    INFO: End of argument passing to stdin
    INFO: Completed Plugin named: Oracle Database Configuration Assistant
    INFO: Oracle Database Configuration Assistant failed.
    INFO: Oracle Database Configuration Assistant failed.
    INFO: ConfigClient.executeToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeToolsInAggregate method
    INFO: Calling event ConfigToolsExecuted
    INFO:
    The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <setup>
    INFO: Completed validating view at state <setup>
    INFO: Validating state <setup>
    WARNING: Validation disabled for the state setup
    INFO: Completed validating state <setup>
    INFO: Verifying route success
    INFO: Get view named [FinishUI]
    INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@22d215
    INFO: Initializing view <FinishUI> at state <finish>
    INFO: Completed initializing view <FinishUI> at state <finish>
    INFO: Displaying view <FinishUI> at state <finish>
    INFO: Completed displaying view <FinishUI> at state <finish>
    INFO: Loading view <FinishUI> at state <finish>
    INFO: Install Succeeded: true
    INFO: Config Tool Succeeded: false
    INFO: Remote Install Succeeded: true
    INFO: Completed loading view <FinishUI> at state <finish>
    INFO: Localizing view <FinishUI> at state <finish>
    INFO: Completed localizing view <FinishUI> at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state finish
    INFO: FinishAction Actions.execute called
    INFO: Completed executing action at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <finish>
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    Edited by: rnair on Mar 18, 2013 10:08 AM

    rnair wrote:
    I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
    C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
    C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
    And the final pop up winow says:
    Database configuration Assistant:Info
    *"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
    *"[INS-20802] Oracle Database Configuration Assistant failed"*
    Details:
    Cause:- The plug-in failed in its perform method
    Action:- Refer to the logs or contact Oracle Support Services.
    Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
    the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
    Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

  • Configuration Assistant FAILED during Oracle 10.2.0.1.0 g installation

    The Configuration Assistant Failed during set up. Can someone tell me how to resolve this problem. My reading reveals that I can use the database, however, it may not function properly? What should I do?

    OS?
    Text of error message?

  • Oracle net configuration assistent failed during database installation

    Hi,
    I am installing oracle database 10g in oel5 during installation the oracle net configuration has failed
    Pls provide me solution to overcome this problem while i am in the middle of the installation

    Hi user;
    Please check CONFIGURATION ASSISTANT ''OMS CONFIGURATION'' FAILED OUI-25031 and see its helfpul for your issue
    Regard
    Helios

  • Oracle Net Configuration Assistant failed during installtion ..

    Hello,
    I have installed oracle 11g on windows 7 enterprise editions..64 bit..
    During installtion i am gettign
    [INS-20802] Oracle Net Configuration Assistant failed. meaasge
    INFO: Error: Environmental error detected: Oracle Home is set to "C:\app\oracle\product\11.2.0\dbhome_3\" in the environment is different from Oracle Net Configuration Assistant installed Oracle Home.
    INFO: Verify that the ORACLE_HOME environment variable or registry setting is set to correct value and relaunch Oracle Net Configuration Assistant.
    I removed all environemnt variable from system related to oracle home..
    But i have analother oracle installtion on same box under "C:\app\oracle\product\11.2.0\dbhome_3\" ...
    we have oracle key entries in regedit of windows..but i can not remove that..
    IS new installtion is refering to old home..?
    Any idea how to correct it ...

    Abdelhadi_DBA wrote:
    Hi osama,
    Q1:What does implied that oracle database version is not vertified for OS?Oracle certifies its software on various OS versions - this certification ensures that the Oracle software will work as advertised on the various OS's that have been certified. If a specific software is not certified on a specific OS, that the software may or may not work as advertised, and Oracle will not help in troubleshooting or fixing any errors.
    Q2 Can you please give us the liste of OS supported by oracle ?
    Thank you in advance.Pl see the Install Docs for the certified OS versions
    11gR1 - http://tahiti.oracle.com/pls/db111/portal.portal_db?selected=11&frame=
    11gR2 - http://tahiti.oracle.com/pls/db112/portal.portal_db?selected=11&frame=
    for example - 11gR1 on Windows - http://docs.oracle.com/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
    HTH
    Srini

Maybe you are looking for

  • What do I need to add Airport to an early-2009 Mac Pro?

    The wife's MB871LL/A. She wants to "get rid of all the wires". I'm pretty sure that just about any Apple Airport Extreme desktop card will work, but do I need to also get an antenna cable, etc.?

  • Viewing file location in Windows explorer from within organizer. PE 10

    Does anyone know how to view a cataloged file location WITHIN  organizer Elements 10 by where the orgainzer opens up the file location in Windows Explorer (Not windows IE Explorer browser).  I know you can see the file path in the properties pane but

  • Trouble in the configuration of a PCI-6013

    Hi: I´m triying to get the MAX to recognize my PCI-6013 but i haven´t been able to get the DAQ board configured. I installed the package included with the board that contains LabVIEW 6.01 evaluation software and NI-DAQ 6.9.Of7 repeatedly, and then in

  • Very Urgent: TCODE IE02: attachment of equipment at a specified position

    hi all While maintaining equipment location using tcode IE02, I need to maintain a check to ensure that if an equipment gets attached to a superior  equipment at a particular position then the system should not allow for any other equipment at that p

  • OEG Design for dynamic routing

    Hi, In the current OEG project, we're thinking of best usability of OEG design/development based on the following scenario: The architecture(sychonized transaction): request flow: CLIENT ---> OEG --> OSB respnse flow: OSB --> OEG --> CLIENT We have 1