Database Configuration Assistant fails during installation Oracle EE 8.1.7
My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (for Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre
some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny
Similar Messages
-
Database Configuration Assistant Failed During 9i Installation
Database Configuration Assistant failed during my 9i Installation due to lack of disk space. I had 4MG allocated on /apps and the application used 3.1GB. I now do not have the required 1GB for the seed database. Actually, I want to create the seed database on /oradata, not on /apps. Does anyone know how I can create that seed database in /oradata? I don't believe I was prompted for where to create that seed database. Also, how can I run the Database Configuration Assistant again? Typing the command dbca told me to set the DISPLAY environment variable and re-run.
Thanks in advance for any help you can give.
VeronicaI had java.lang.NoClassDefFoundError too.
This was fixed by having DISPLAY setting
#export DISPLAY=host:0.0
Make sure your x window system is working Ok.
I also used unset LANG -
Database Configuration Assistant fails during instalation of Oracle EE 8.1.7
My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andresome good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny -
"Web Cache Configuration Assistant" failed during installation
Hi,
I'm trying to install Grid Control on Fedora Core 4 but it failes during the installation at the "Web Cache Configuration Assistant".
I already createt a loopback device on localhost.
Thanks for any surggestions!!
End output from spawned process.
Configuration assistant "Web Cache Configuration Assistant" failed
2
ORACLE_HOME is /opt/oracle/EM/10.1.0.3
Failed in smi manipulation().
TaskMaster initialization failed.
Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
at oracle at oracle.ons.ONS.addSubscriber(ONS.java:333)
at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
at oracle.ons.Subscriber.<init>(Subscriber.java:80)
at oracle.ons.ONS.createNewSubscriber(ONS.java:687)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.ias.webcache.config.WebcacheConfig.smiSetup(WebcacheConfig.java:243)
at oracle.ias.webcache.config.WebcacheConfig.smiEnableWebcache(WebcacheConfig.java:215)
at oracle.ias.webcache.config.WebcacheConfig.enableConfiguration(WebcacheConfig.java:191)
at oracle.ias.webcache.config.WebcacheConfig.main(WebcacheConfig.java:66)
.ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
cat /etc/hosts:
127.0.0.1 loopback localhost
127.0.0.1 fedora01 fedora01.barmenia.de localhost.localdomain localhost
172.xxx.xxx.xxx fedora01.barmenia.de fedora01 oracleinstallhi,
i tried to reinstall but it is still the same problem.
before i started the installer there was no oracle process left
fedora01.oracle[emrep]>ps -x
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.5/FAQ
PID TTY STAT TIME COMMAND
2976 pts/2 S 0:00 -ksh
17573 pts/2 R+ 0:00 ps -x
fedora01.oracle[emrep]>.1.0.3/Disk1/runInstaller PRE_REQUISITE=TRUE <
Starting Oracle Universal Installer...
before the assistant fails it looked like:
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.5/FAQ
PID TTY STAT TIME COMMAND
2976 pts/2 S+ 0:00 -ksh
17588 pts/2 S 2:32 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17589 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17590 pts/2 S 0:26 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17591 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17592 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17593 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17594 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17595 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17596 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17597 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17598 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17600 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17601 pts/2 S 0:07 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17607 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17677 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26185 ? Ss 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26301 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26381 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26409 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/bin/tnslsnr LISTENER -inherit
26669 pts/4 S 0:00 -ksh
26717 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26718 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26719 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26720 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26721 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26722 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26723 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26724 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26725 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26726 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26727 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26728 26729 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26730 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26731 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26732 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26770 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26771 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26772 pts/2 S 0:01 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26773 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26774 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26775 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26776 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26777 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26778 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26779 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26780 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26781 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26782 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26783 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26791 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26792 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26834 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26835 pts/2 S 0:00 /bin/sh /opt/oracle/EM/10.1.0.3/opmn/bin/opmnctl stopall
26843 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -a -q shutdown
26844 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
I'm running out of ideas!!
thanks for your help!!!
daniel -
SSO Configuration Assistant failed during installation of OCS 10G on linux
I am trying to install OCS 10g infrastructure on CentOS 4.2
the linux version which the installer displays is redhat-4
The installation works fine but the SSO CA fails and gives this message
NLS_LANG param = AMERICAN_AMERICA.AL32UTF8ERROR : Exception while configing SSO DAD :oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
at oracle.ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
at oracle.ons.ONS.addSubscriber(ONS.java:336)
at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
at oracle.ons.Subscriber.<init>(Subscriber.java:80)
at oracle.ons.ONS.createNewSubscriber(ONS.java:690)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.webdb.config.smi.GeneralConfig.<init>(Unknown Source)
at oracle.webdb.config.smi.GeneralDADConfig.<init>(Unknown Source)
at oracle.webdb.config.smi.DADConfig904Imp.<init>(Unknown Source)
at oracle.webdb.config.smi.ConfigFactory.getGeneralDADConfig(Unknown Source)
at oracle.webdb.config.smi.ConfigFactory.getDADConfig904(Unknown Source)
at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1493)
at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
Please fix the error reported in the stack trace above and re-run SSO Config Tool.
/home/oracle/product/10.1.2/ocs_1/jdk/bin/java
-cp
/home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
-DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
oracle.sysman.emSDK.conf.TargetInstaller
deletetarget
oracle_sso_server
infra_inst.nufastserver.local.nu_Single Sign-On:orassogetASTargetInfo: oracleHome = "/home/oracle/product/10.1.2/ocs_1".
getASTargetInfo: iasName = "infra_inst.nufastserver.local.nu".
getASTargetInfo: iAS Target Type = "oracle_ias".
Setting the AS product version value in targets.xml to be "10.1.2.0.2".
Calling method getASTargetInfo.getASTargetInfo: StatusURL value = "http://nufastserver.local.nu:7777".
Retrieved SSO protocol, host, and port info from targets.xml.
The values are: "http://nufastserver.local.nu:7777".The following values will be used to configure the sso_server target entry in targets.xml.
Protocol: "http".
Hostname: "nufastserver.local.nu".
Port: "7777"./home/oracle/product/10.1.2/ocs_1/jdk/bin/java
-cp
/home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
-DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
oracle.sysman.emSDK.conf.TargetInstaller
addtarget
/home/oracle/product/10.1.2/ocs_1/sso/sso_server_target2add.xmlConfiguring SSO languages with the following language code:
us Language us is already installed.
About to execute java call using emConfigInstall.jar.
Here are the arguments:
/home/oracle/product/10.1.2/ocs_1/jdk/bin/java
-DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
-jar
/home/oracle/product/10.1.2/ocs_1/jlib/emConfigInstall.jar
consolesn
/home/oracle/product/10.1.2/ocs_1/sso/conf/consoleConfigSNSegment.xml
Finished executing the call.Child Process has exited.
SSO Configuration Assistant failed.
I have checked thelog files but there is nothing in that.
in the hosts file I have given fully qualiifed name as "nufastserver.local.nu"
Can any bosy help me in this problem. I have tried reinstalling the OS also but the problem is still there at the same placeI had exactly the same poblem on a red hat 64bit OS on the infrastructure install.
But while trying to start opmn manually (that is definitely not to do to solve the problem). I had the error telling me that the shared library libdb.so.2 was not accessible.
I did add the compat-db-4xxxxx.i386.rpm and then retry the check. Then all passed threw.
To note that the .log file from the install says definitely nothing about this and that just trying to start the opmn did create another .log that gave me the file problem.
Hope it can help for 64bit linux OS installation. -
OPMN Configuration Assistant Fails during Installation
Hi,
I am trying to install Oracle 10g 10.1.2 (Release 2) in Windows 2K platform, it fails in the installation with the message as "OPMN Configuration Assistant Fails" in the OUI installation wizard and does not proceed at the end of it.
Then when I try to goto console of opmn and do startall and find out the status, it gives the status as OHS down. ANy idea why this is happening ?
Regds,
Nagarajan K.Hi Nagarajan!
When the OHS does not start most of the config assitants will fail. Often the failures occur due to a bad network configuration (check your hosts file), more than one network card or an already running process on that port (eg you already have an Apache running on this machine).
In the cfgtoollogs a detailled error should be reported in the installactions file.
cu
Andreas -
Database Configuration Assistant fails during 9i installation
Hello!
I'm a student and totaly new to oracle. I have tried to install the 9.2 version, but there were a message during installation that the OracleMTSRecoveryService made problems. I sad "retry" and no more messages appeared, but after the installation the installer says the dbca could not be installed. The error message is:
java.lang.NoClassDefFoundError: oracle/sysman/emSDK/common/nls/MessageBundle
at
at oracle.sysman.assistants.util.step.StepContext.<init>(StepContext.java:121)
at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:454)
at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:185)
at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.<init>(ProgressOnlyHost.java:89)
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:137)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:85)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Exception in thread "main"
Please help, I have been searching for hours to find a solution but without success!I had java.lang.NoClassDefFoundError too.
This was fixed by having DISPLAY setting
#export DISPLAY=host:0.0
Make sure your x window system is working Ok.
I also used unset LANG -
Agent Configuration Assistant failed during installation of Oracle 9i
Hi,
Currently having problem with installing Oracle 9i R2 (9.2.0.4) on Redhat. Am getting this error:
Parameter "orahome" = /apps/oracle/product/9.2.0.4/db_1
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Does anyone has a solution on this?
Thanks,
JayArrLets start with the basics. There is no such thing as Oracle 9i.
Yes I know Oracle years ago used it as a marketing label but to help you we need the exact version to 3 decimal places.
Either way the version you are just now installing is so old it will be unsupported? Why are you installing Neolithic software?
And finally ... What agent? What agent configuration? What does an agent have to do with a 9i installation on XP?
The more specific you are, and the clearer your description, the more likely you will get help. Though why you are installing something so old escapes me at the moment. <g> -
[INS-20802] Oracle Database Configuration Assistant failed
I am trying to install Oracle 11g R2 on my windows 7 Professional, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?
Oracle Advanced Security 11.2.0.1.0
Oracle Internet Directory Client 11.2.0.1.0
HAS Files for DB 11.2.0.1.0
Oracle Net Listener 11.2.0.1.0
Oracle Net Services 11.2.0.1.0
Oracle Text 11.2.0.1.0
Oracle Database 11g 11.2.0.1.0
Oracle COM Automation Feature 11.2.0.1.0
Oracle OLAP 11.2.0.1.0
Oracle Spatial 11.2.0.1.0
Oracle Partitioning 11.2.0.1.0
Enterprise Edition Options 11.2.0.1.0
Oracle Database 11g 11.2.0.1.0
INFO: OiicSaveInvWCCE:After saving the inventory. This is an Install session.
INFO: SaveInvWCCE JRE files in Scratch :0
INFO: Aggregate Name as given in the action for additional utility tools: oracle.rdbms.util
INFO: Aggregate Location as given in the action for additional utility tools: C:\app\User\product\11.2.0\dbhome_1/install/config
INFO: checking if the file C:\app\User\product\11.2.0\dbhome_1/install/config\oracle.rdbms.util.xml is present?
INFO: Can proceed with additional utility processes ? : true
INFO: Copying C:\app\User\product\11.2.0\dbhome_1\install\config\oracle.rdbms.util.xml to C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.rdbms.util.1_0_0_0_0.xml with the permissions og-rwx
INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.rdbms.util instancePath: inventory\ContentsXML\ConfigXML\
INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.rdbms.util] instancePath: inventory\ContentsXML\ConfigXML\
INFO: No of Tools: 1
INFO: Starting to execute the additional tools
INFO: Executing utility tool: ADR Setup Utility
INFO: Executing utility tool: ADR Setup Utility
INFO: Command = C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1/bin/diagsetup.bat basedir=C:\app\User oraclehome=C:\app\User\product\11.2.0\dbhome_1
INFO: Successfully executed utility tool: ADR Setup Utility
INFO: Successfully executed utility tool: ADR Setup Utility
INFO: All the tools have been executed Successfully
INFO: Complete execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch :0
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Configuration Manager
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: HAS Common Files
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Netca Client
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Database 11g
INFO: The Top level Aggreage File = C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
INFO: processing tool: Launch browser
INFO: removing plugin invocation for: Launch browseras it doesnt support clone mode
INFO: removing plugin invocation for: Launch browseras it doesnt support add node mode
INFO: Namespace prefix 'agg' used but not declared.
INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.server instancePath: inventory\ContentsXML\ConfigXML\
INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.server] instancePath: inventory\ContentsXML\ConfigXML\
INFO: aggr ref length : 6
INFO: cf session hashcode: 1847125318
INFO: cf session saved with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_createResponseFile is not added to the global context map
INFO: This variable s_ps is not added to the global context map
INFO: This variable s_oraName is not added to the global context map
INFO: This variable s_ccrJarDestination is not added to the global context map
INFO: This variable b_localInstall is not added to the global context map
INFO: This variable b_doConfigCCR is not added to the global context map
INFO: This variable b_ccrUpgrade is not added to the global context map
INFO: This variable s_rspFilePath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: for oracle.has.common no aggregate found by cf: no configuration
INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the global context map
INFO: This variable s_shareName is not added to the global context map
INFO: This variable s_runtimeLib is not added to the global context map
INFO: This variable s_runTimeJar is not added to the global context map
INFO: This variable s_responseFileName is not added to the global context map
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_netcfgName is not added to the global context map
INFO: This variable s_netcahelpName is not added to the global context map
INFO: This variable s_netcaUpgradeFlag is not added to the global context map
INFO: This variable s_netcaClass is not added to the global context map
INFO: This variable s_netCA_Args is not added to the global context map
INFO: This variable s_netCAInstalledProtocols is not added to the global context map
INFO: This variable s_netAPIName is not added to the global context map
INFO: This variable s_ldapclnt9 is not added to the global context map
INFO: This variable s_ldapclnt11 is not added to the global context map
INFO: This variable s_ldapclnt10 is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable s_jreJarFile is not added to the global context map
INFO: This variable s_jreJar is not added to the global context map
INFO: This variable s_jewtName is not added to the global context map
INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
INFO: This variable s_icebrowserName is not added to the global context map
INFO: This variable s_helpName is not added to the global context map
INFO: This variable s_ewtcompatName is not added to the global context map
INFO: This variable s_ewtName is not added to the global context map
INFO: This variable s_ewtFile is not added to the global context map
INFO: This variable s_ewtCompat is not added to the global context map
INFO: This variable s_cfgMethod is not added to the global context map
INFO: This variable s_caHelpZhTwJar is not added to the global context map
INFO: This variable s_caHelpZhCnJar is not added to the global context map
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\app\User\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\app\User\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@5059a331
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@2ce90f2d
INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Created config job for Oracle Configuration Manager Configuration
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@74247cc2
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: INFO: Parsing command line arguments:INFO: Parameter "orahome" = C:\app\User\product\11.2.0\dbhome_1INFO: Parameter "orahnam" = OraDb11g_home1INFO: Parameter "instype" = typicalINFO: Parameter "inscomp" = client,oraclenet,javavm,server,anoINFO: Parameter "insprtcl" = tcp,nmpINFO: Parameter "cfg" = localINFO: Parameter "authadp" = NO_VALUEINFO: Parameter "responsefile" = C:\app\User\product\11.2.0\dbhome_1\network\install\netca_typ.rspINFO: Parameter "silent" = trueINFO: Done parsing command line arguments.INFO: Oracle Net Services Configuration:INFO: Profile configuration complete.INFO: Oracle Net Listener Startup:INFO: Running Listener Control:
INFO: C:\app\User\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENERINFO: Listener Control complete.INFO: Setting Listener service to start automatically.INFO: Listener started successfully.INFO: Listener configuration complete.INFO: Default local naming configuration complete.INFO: Oracle Net Services configuration successful. The exit code is 0WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO:
INFO:
INFO: Started Plugin named: Oracle Database Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Executing DBCA
INFO: Command C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1\bin\dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl.168.2.5 -emConfiguration LOCAL -storageType FS -datafileDestination C:\app\User\oradata -datafileJarLocation C:\app\User\product\11.2.0\dbhome_1/assistants/dbca/templates -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -automaticMemoryManagement true -totalMemory 3237 -maskPasswords false -oui_internal
INFO: ... GenericInternalPlugIn.handleProcess() entered.
INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
INFO: ... GenericInternalPlugIn: checking secretArguments.
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read: SYS_PASSWORD_PROMPT
INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
INFO: Read: SYSTEM_PASSWORD_PROMPT
INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
INFO: Read: DBSNMP_PASSWORD_PROMPT
INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
INFO: Read: SYSMAN_PASSWORD_PROMPT
INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
INFO: End of argument passing to stdin
INFO: Completed Plugin named: Oracle Database Configuration Assistant
INFO: Oracle Database Configuration Assistant failed.
INFO: Oracle Database Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <setup>
INFO: Completed validating view at state <setup>
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Get view named [FinishUI]
INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@22d215
INFO: Initializing view <FinishUI> at state <finish>
INFO: Completed initializing view <FinishUI> at state <finish>
INFO: Displaying view <FinishUI> at state <finish>
INFO: Completed displaying view <FinishUI> at state <finish>
INFO: Loading view <FinishUI> at state <finish>
INFO: Install Succeeded: true
INFO: Config Tool Succeeded: false
INFO: Remote Install Succeeded: true
INFO: Completed loading view <FinishUI> at state <finish>
INFO: Localizing view <FinishUI> at state <finish>
INFO: Completed localizing view <FinishUI> at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
Edited by: rnair on Mar 18, 2013 10:08 AMrnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory. -
Problem during installation oracle database configuration assistant FAILED
Hi Dear,
The Configurations are :
VM OS : Oracle enterprise linux 5
Trying to install : Oracle 11g R1
I'm having a real problem , so i can't continue my installation during the configuration assistant, oracle net configuration assistant was succeeded but oracle database configuration assistant FAILED
Here is the long message showed by console :
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/11.1.0/db_1/bin/netca /orahome /u01/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = /u01/app/oracle/product/11.1.0/db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
/u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Please help me it's urgentlyPlease help me i can't find any solution to resolve this trouble
Should i uninstall this version or what exactly, could you please suggest to me something like another release who matches that configuration
Sorry but i have no idea
Waiting for the response -
Configuration Assistant FAILED during Oracle 10.2.0.1.0 g installation
The Configuration Assistant Failed during set up. Can someone tell me how to resolve this problem. My reading reveals that I can use the database, however, it may not function properly? What should I do?
OS?
Text of error message? -
Configuration Assistant failed during OEM 10g Grid control installation
Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha -
Configuration assistant "Oracle Database Configuration Assistant" failed
I install oracle 10g on HP UX 11.23. I got this error :
hecking for PHSS_33278; found Not found. Failed <<<<
Checking for PHSS_33279; found Not found. Failed <<<<
Checking for PHSS_33277; found Not found. Failed <<<<
Checking for PHSS_33279; found Not found. Failed <<<<
, my first question :
can i pass this step, ?
after all, my installation form is okey, but everything change become nightmare.
I installation failed on Configuration Assistant :
Configuration assistant "Oracle Database Configuration Assistant" failed
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
1. check the details panel on the configuration assistant screen to see the error resulting in the failures
2. fix the errors causing these failures
3. select the failed assistants and click the retry button to retry the
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------But i still get this error. Do you have solution for this ?
I installation failed on Configuration Assistant :+
Configuration assistant "Oracle Database Configuration Assistant" failed+
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
*1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
*2. fix the errors causing these failures*
*3. select the failed assistants and click the retry button to retry the*
Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
Edited by: user9198604 on Feb 25, 2010 3:37 AM -
Oracle Net configuration assitant Failed during installation
Hi, all
I was running oracle database 11.2.0 on windows xp service pack 3
I deinstalled it and reinstalled again.
everything wet well until it reached to configure Net configuration assistant which was failed to start.
Now i can not start Net configuration assistant as well as can not create listener with lsnrctl commandline utillity. all the time i tried to create a listener it does not create.
I tried to start net configuration assistant from programe list in windows it is not starting. while installation it generated a log file the enteries related to net configuration are as follows . Please note that i have installed java 1.7.0 on my machine
and also i can not start dbcontrol and there is no mention of dbcontrol in program list too.
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO:
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = D:\app\oracle\product\11.2.0\dbhome_1
INFO: Parameter "orahnam" = OraDb11g_home1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Parameter "insprtcl" = tcp,nmp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = D:\app\oracle\product\11.2.0\dbhome_1\network\install\netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0b2d98ca, pid=144, tid=4064
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b03 mixed mode)
INFO: # Problematic frame:
INFO: # C [oranl11.dll+0x498ca]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid144.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
any solutionIt seems you have a problematic java frame (perhaps bug) and need to check out the reason in the hs_err_pid144.log file.
-
Oracle 11g "Oracle Database Configuration Assistant" failed
Hi
am trying to install oracle 10g databse .
am getting Configuration assistant "Oracle Database Configuration Assistant" failed
in log file i see
[Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-19] [18:32:29:343] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
i have created microsoft loop back adapator and configured TCP/IP.
what would be the problem?At the Oracle Support site https://support.oracle.com
To access the document, you will need a valid CSI (Customer Support Identifier), which is given when you purchase a support contract from Oracle.
If you do not have a CSI, I would recommend that you completely uninstall the product and reinstall again by following the Install Guide at http://www.oracle.com/pls/db102/portal.portal_db?selected=11
HTH
Srini
Maybe you are looking for
-
Trying to Install OS 10.4 - Can someone help?
I am trying to install a black DVD Mac OS X Tiger Version 10.4 that I received as a gift (person got tired of hearing me complaining about not able to used TurboTax with my present OS) on my 400 MHz PowerPC G4 (AGP graphics) that presently has Versio
-
SSRS dataset throws error when another stored procedure is called inside dataset stored procedure
Hello; I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the liv
-
Error when uploading par files - Exception
Hi all, I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is: Messages: INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par INFO: Application successf
-
IPad2 upgraded to iOS6 - Problems
Hi, I have just upgraded my iPhone 4s to iOS 6 without incident. However when I then carried out this upgrade on my iPad 2 I experenced the following: 1. forced to carryout a factory reset 2. unable to connect to wifi So I now have an iPad2 that is
-
Partitioning in Oracle -- Need some clarification
Hello all, While I was reading the document (PDF) on Oracle9i Data Warehousing Guide (Part No: Part No. A90237-01), I found one statement which made me confused. The statement is regarding Hash Partitioning: "Hash partitioning is a good and easy-to-u