Database Configuration Report

Hi,
Pls advice me to how to get 'Database Configuration Report' on oracle 10g
Thank,
Jagath

Jagath,
Can you elobrate what exactly you mean Database Configuration Report? Are you looking to find out existing database configuration and more? Or you mean Database configuration assistant? You can use AWR report by running awrrpt.sql and at the end of report you can find detailed configuration report if that's what you after
sqlplus '/as sysdba'
sql> $ORACLE_HOME/rdbms/admin/awrrpt.sqlRegards
OrionNet

Similar Messages

Unable to create Database in Reporting Service Configuration

Hi,
We have SQL Server 2012 in our environment. I want to enable monitor report in Lync 2013. i have separate Lync sql instance.
I am trying to configure new database in Reporting Service Configuration manager in report Server database Configuration wizard.
while testing connection getting below error.
could not connect to server:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to
allow remote connections.(provider:Named Pipes provider,error:40-could not open a connection to SQL Server)
kindly help to resolve issue.

Hi Rakesh,
Please check the below details information:
Check the ReportServer db is present in the Database engine.
Go and check the report server configurations (go here:Start -> All Programs -> Microsoft sql server 2012-> Configuration Tools -> Report Service Configuration Manager
check all the connections if still not working. then create a new reporting services Database. While creating it make sure you select native mode, if you want to create a share point services then select share point integration mode.
If the above didn't work, Please check which port is used for SQL Server database engine from SQL Server Configuration Manager.
If we are using dynamic port, please make sure:
SQL Server Browser service is running.
UDP 1434 port is enabled in the firewall.
If we are using static port, please make sure the port is enabled in the firewall.
Below is useful link about how to troubleshoot connection issue:
http://blogs.msdn.com/sql_protocols/archive/2005/12/22/506607.aspx
https://msdn.microsoft.com/en-us/library/ms156468.aspx?f=255&MSPPError=-2147217396
Similar thread for your reference:
http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
If you have any more questions, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Crystal Report Server: Cannot save Database Configuration in CMC

I already posted this question as SAP internal CSN message (message number 1896093 2009) but did not get any answer so far.
I have installed a test version (which I'd like to become permanent some
day...) of Crystal Reports Server 2008 on a local machine to be able to
share Crystal reports within our department.
I created a couple of reports which I would like to get updated
regularly. The issue is here that I get a logon screen to the underlying
SQL Server as soon as a user clicks on "Refresh" when viewing a report
from InfoView. The SQL Server is running on integrated security
via SSO, which I cannot change...
To get around this issue I would like to change the default Database
Configuration of the reports. Hence I do the following:
1) I open the Central Mangement Console
2) I select one of my reports
3) Rightclick on Properties
4) On the Default tab I select Database Configuration
5) the config is set to "Logon Screen" and I ant to change this to SSO,
so I set this
6) Now I click on Save
=> The setting is reverted to the old "Logon Screen" settin1g
This behavior is the same for all the reports I'm using.
Looking forward to any help, kind regards
Wolfgang
P.S.: Ultimately this issue arises, because I cannot refresh my crystal report data in batch job mode, because the reports are reading data from an SQL server, which allows SSO-logon (integrated security) only. Thus I have to open each and every report for update manually and click on the refresh button.
Edited by: Ralf Wolfgang Geithner on Jul 3, 2009 11:00 AM

Hi Manish,
thanks for your answer. Unfortunately I'm still stuck in this matter.
Does this happen with the sample reports too? I think it will be a good approach to try this to see if your system is behaving differently for sample reports and reports published from outside
I did not really try this, but viewing and editing my reports in Crystal Reports 2008 Designer works perfectly fine. As well can the user view my reports in the InfoViewApp.
Also, does it revert to the login screen setting immediately after you click Save or does it show the setting as changed after clicking Save but, does not retain it when you come back and check the report settings again?
The data is reverted immediately after clicking "Save"
Kind reagrds
Wolfgang

'No such host is known' error when configuring Reporting database

Hi,
We are joining two report server databases using reporting services config manager. The problem is when we are trying to connect database on another machine we are receiving following error at step 'generating Rights script'
System.Net.Sockets.SocketException: No such host is known
at System.Net.Dns.GetAddrInfo(String name)
at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
at ReportServicesConfigUI.RSDatabase.IsLocalDbServer(String dbServer)
at ReportServicesConfigUI.RSDatabase.GrantRSConnectionRights()
at ReportServicesConfigUI.RSDatabase.CreateNewDatabase()
As per step mentioned in following link,
http://blogs.msdn.com/b/sameersurve/archive/2009/06/15/no-such-host-is-known-error-when-configuring-ssrs-2008.aspx
We tried opening port 1434 for the Reportserver db machine. but it didnt worked for me.
Following are points i feel could be the reason of failure,
1. The two machine we are working on are in different domains.
2. The Product version of the two reporting servers are different.
Have anyone experienced this if yes any solution that i can try?

Hi Shrikant_k,
If we are using a remote database server for the report server database, we should refer to the following tips:
Enable remote connections. And we should also open your firewall software and open the port that SQL Server listens on. For the default instance, this is typically port 1433 for TCP/IP connections. To verify that the instance accepts remote connections,
please refer to the following article:
http://technet.microsoft.com/en-us/library/ms157300(v=sql.105).aspx
When you enable remote connections, the client and server protocols will also be enabled. To verify the protocols are enabled, please see:
http://technet.microsoft.com/en-us/library/ms191294(v=sql.105).aspx
When the database server is in a different domain or we are using workgroup security, we must configure the connection to use a SQL Server database login. In this way, we must update the report server database connection every time we change the password
or the account.
When creating a report server database, be aware that not all editions of SQL Server can be used to host the database. The following document is for your reference:
http://technet.microsoft.com/en-us/library/ms157285(v=sql.105).aspx
Reference:
Configuring a Report Server Database Connection
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to configure reporting services on Web(sharepoint) server where DB(SQL )server is insatlled on another machine.

Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha Muyida

Hi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha

Configuring Reporting services for SCCM 2012

Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,

Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

Database Configuration Assistant Failed

On Windows 2000 8iEE 8.1.7 9iAS EE 1.0.2.1 Same Machine
I'm facing a problem with Cache Database Configuration Assistant. By the time I was installing 9iAS EE, the Database Configuration Assistant show up and It get connected properly to the origin database but get stuck at 96% when trying to import user list. So the installation of CACHE Database failed.
Oracle Portal and others products get installed properly.
I tried again to reinstall the Cache Database using command line like :
wtacca -deinstall and then
wtacca -create - typical but still get stuck at 96%.
I will appreciate your comments on how to solve this problem.
Besides,once it get installed, Do I need to reconfigure another tool ? Like Portal, Form Reports Discover Services etc??
Thanks in advance.
Daniel
null

okey sir,
first of all, please install your 9ias in a different oracle_home. They both cannot share same oracle home.
During installation of 9ias, please re-configure your network configuration file i.e: tnsnames.ora to include your origin database services.
Then proceed with the installation...
Good luck.

Database Configuration problem

I am brand new to Crystal (1 week) so bear with me please.
I have created a crystal report from an access database. Although this access database doesn't have any security itself one of its tables is linked to a SQL server through ODBC. When i create a report in Crystal using the Access database it works great. When i publish this report to the server it wants some type of login information.
Under Database configuration (CMC) for the report i seem to have two options.
1)Use original database logon information from the report.
    Server = Location of my access database
    Database = ""
    User: ?
    PW:?
or
2) Use custom database logon information specified here.
     Select a database driver
    Server: ? Is this the SQL server or the server where my access database is contained?
     Database: ? same question
     User: ? Is this the sql user?
I have tried both can't get it to work. What login information does it want? Does it want the sql login information? What am i missing? Any help would be great. I know this is a lot of questinons but i am stumped.
thanks

Hi Jesse,
Because your .mdb file doesn't require a password, I would check if Page server can access to .mdb file first. When viewed from Enterprise, Page Server needs to be able to access to .mdb file. Where is .mdb file located? If it is on the network share, Page Server service needs to run under the user account which has access to the share. By default it is running under System Account.
Test the report in Crystal Reports on the server(not from a client machine). If you can refresh it successfully, check what user account is logged on the server, then use the user account for Page serer service. Restart Page Server and test the report from Enterprise.
Hitomi

Delete a specified data sorce in the database configuration

Hi @all,
I created and published successfulyl a Crystal Report on a Business Objects D-System! In the database configuration of the these crystal report in the CMC, we use the option "Prompt the user for database logon".
But it appears two data sources in the left box, where I can just modify some options, when I click on it.
The first data source is an IP-adress of the DEV-System, which is obviously the meta-information of the Crystal Report.
The second datasource is the AS, which I set in BW under the TC /crystal/rptadmin "Set BW source parameters".
How can I delete the first data source with IP-adress?
When I transport the Crystal Reports to the Business Objects P-System, these IP-adress is still set as in the D-System and is not translated! How can I solve this problem?
Best regards,
Dirk

Hi Ingo,
I solve it by myself.
The problem was the use of an function module. If I save the Crystal Report for the P-System, it runs and the IP-adress will be translate.
Best regards,
Dirk

Standby Database Configuration with LGWR and ASYNC

Hi,
I am running a standby database configuration on a 100MBit LAN
with the following set-up:
log_archive_dest_2='service=standby mandatory reopen=300 lgwr
async=2000'
The system is handling a lot of very small transactions, not
involving large amounts of data.
My questions are:
- What are the potential problems in using a small ASYNC buffer
like the one above?
- Does a larger ASYNC buffer influence the latency in copying
changes from the production database to the standby database -
will it buffer more changes before sending them to the standby
database?

Murlib,
I have few more doubt-
Our requirement is to configure a Standby( Physical-MAXIMUM PERFORMANCE
mode) in a place, which is 600 KM away from our primary destination.
Currently our LAN network traffic rate is 100 Mbps. but this traffic is
virtually reduced to 1Mbps out side our LAN.
Our Production Database is 24X7 and Its generating 17 GB Archive files every
day.
Since the net work traffic is slow i think, it will create some log gaps,and
also we couldn't do a point in time recovery.
We are configuring a Standby, here inside our LAN in Managed Recovery Mode
for recovery purpose and will keep a Standby there in remote place for
Reports.
and it will be recover it in every morning.If iam following this procedure,
my
log_archive_dest_2 ='service=stby ARCH NOAFFIRM' ( which is the standby here
inside our LAN and should be in MANAGED RECOVERY mode)
and i need to configure the parameters for standby in my remote location.So
my doubt is-
Shall i need to configure "log_archive_dest_n" in the parameterlist of my
Primary for that remote Standby ?
I think for manual recovery we can aviod that.But we need to eonnect it
thrrough Oracle Net
Can you please tell me the essential PRIMARY parameter list entries for this
kind of remote standby , recovering in a manual mode ?
i think the following parameter should be there -
FAL_SERVER
FAL_CLIENT
DB_FILE_NAME_CONVERT
LOG_FILE_NAME_CONVERT
STANDBY_FILE_MANAGEMENT=AUTO
STANDBY_ARCHIVE_DEST
Thanks and Regards,
Raj

Install error - database configuration assistant

HI. During install a 10g oracle database, the universal installer prompt me that one of required component , DATABASE CONFIGURATION ASSISTANT, is not properly installed. The first warning has been submitted with popup that reported " ORA - 22288 , file or LOB operation filed ......
My current OS is Windows 2000 Advanced Server SP4.
Please , help me.
Tanks!

HI, tanks for your interest!
I have tried to retry the "reccomended" component installation ( dabase configuration assistant) but the result have been the same!
follow an extract of log file...
Il listener è stato avviato alla porta:1521
Avvio listener di Oracle Net:
Controllo del listener in esecuzione:
F:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER
Controllo del listener completato.
Avvio del listener non riuscito. Il listener può essere già in esecuzione.
Configurazione del listener completata.
Configurazione della denominazione locale predefinita completata.
Configurazione di Oracle Net Services completata. Il codice di uscita è 0
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = C:\WINNT\system32\cmd /c call F:\oracle\product\10.2.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword 05837d92bc1e15c52e043487527ddab44d -systemPassword 05837d92bc1e15c52e043487527ddab44d -sysmanPassword 05f5436fbcdeda00ccb795c17e87b43fae -dbsnmpPassword 05f5436fbcdeda00ccb795c17e87b43fae -emConfiguration LOCAL -datafileJarLocation F:\oracle\product\10.2.0\db_1\assistants\dbca\templates -datafileDestination F:\oracle\product\10.2.0\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords true -sampleSchema true -recoveryAreaDestination NO_VALUE
Command = C:\WINNT\system32\cmd /c call F:\oracle\product\10.2.0\db_1/bin/dbca.bat has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to F:\oracle\product\10.2.0\db_1
Configuration directory is set to F:\oracle\product\10.2.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "F:\oracle\product\10.2.0\db_1\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants ......
tanks

Database configuration in CMC

Hello,
My question is about database configuration in CMC. Which option
1) Use original database to logon
2) Use custom database to logon
should be used? And what is the difference between them?

Option 1(Original database logon) contains the connection data for the data source used when the report was set to access in the CR designer when it was exported into your BOBJ repository.
Option 2 (Custom) allows you to override the original data source and fetch data from another database or by using other connection parameters.
You can use which ever option fits your needs.
Regards,
Stratos

JReport Database configuration

I just downloaded an evalution version for the JReport in order to know and experience the features its provided. however, im encountering the db connection problem so just stuck here. would like to seek help from you all.
As for your info, i've installed JDBC Ms.SQL Server 2000, I am having the problem in setting up JDBC driver and do not know how to edit the %installroot%JReport\bin\JReport.bat to append the achieve file of the driver to the classpath.
Anyone can advice?
Thanks,
Veasna

I went with the Tomcat install for the server. Our reports all work fine in the client. The databases that we are using are Oracle and Foxpro...I have an ODBC for the Foxpro and Oracle client and ODBC for those databases as well. When I put in my paramters I get Error in File Donor Activity: The table could not be found. The ODBC on the server matches my computer. The report DOES prompt me for the paramters and I can input them, but the I hit OK and it gives me the error. I am using original database login with no data in the username or password field (database configuration). Any ideas...I am totally stumped have been working on this for days...

Small bug: Database configuration - Initialization parameters

Hi!
SQLDeveloper version: 3.2.20.09
View -> DBA -> Database configuration -> Initialization Parameters -> right click "Open" -> editor with "Parameter" and "Value" (inter alia) columns appears
Changing value for parameter "optimizer_features_enable" isn't working:
Example:
Parameter: optimizer_features_enable
Changing value from 11.2.0.1 to 9.2.0 -> commiting changes -> ORA-02017 error appears ("integer value required")
In "Messages - Log" window appears the following statement: ALTER SYSTEM SET optimizer_features_enable=9.2.0 COMMENT='' SCOPE=MEMORY
I think rather it should be: ALTER SYSTEM SET optimizer_features_enable='9.2.0' COMMENT='' SCOPE=MEMORY
It looks like a small bug.

Hi dz_r,
One workaround for this case is, when editing the data in the grid cell, to enclose the Oracle version in single quotes. After committing to apply the update (which works), the grid refresh strips away the single quotes, leaving the desired value displayed in the cell.
So this is, as you say, a small bug. Note that not all parameters of type String require single quotes, e. g., cursor_sharing=exact. Probably any String beginning with a numeric digit should be enclosed in quotes automatically.
I logged the following bug:
Bug 16733790 - UPDATING INITIALIZATION PARAMETER OF TYPE STRING FAILS IF BEGINS WITH A NUMERIC
Thanks for reporting this,
Gary
SQL Developer Team

Database Configuration Report

Similar Messages

Maybe you are looking for