Database Creation After Config Failure

Guys,
We are new to Oracle and we have completed an install on solaris 9. At the end of the install 4 tasks ran. One of them was configuration tool. This failed. After this Enterprise manager appeared and we tried to add a database. Each attempt to add a database worked. Once we tried to connect to the database we got an error. The error message said "SID does not exist or can not be reached". We checked tnsnames and everything looked ok.
Anybody ideas what we have done wrong and what we can do to fix the problems we are meeting?
Many thanks in advance for any help or suggestions,
Jim Wood.

I think you have not a database created in this moment. You can realize it of several ways.
Apply this in the command line:
ps -ax
ls -la $ORACLE_BASE/admin
Joel Pèrez
http://otn.oracle.com/experts

Similar Messages

  • My session in xmanager will die after 80% of database creation completes

    Hi,
    I am instaling oracle 10g on solaris through xmanager(X terminal), first i installed oracle 10g software only and i invoked dbca through xmanager after 80% of database creation completes my session will die i tried 4 times same problem, any body have faced the same problem, advice greately appreciated.
    Thanks
    Prakash

    Did you check installation logs ?
    oraInventory/logs/installActions<timestamp>.log
    <ORACLE_HOME>/cfgtoollogs/oui/installActions<timestamp>.log

  • PeopleTools update before or after database creation

    Hi, there:
    We need to create a new environment with latest PeopleTools and FSCM. The latest PeopleTools is 8.49.20. Can I install PT 8.49.20 before creating the database? Or I need to create the datbase first and then update the PeopleTools.
    Thanks for any help.

    The latest Peopletools version/patches is 8.49.21 :-)
    And, yes, you can install the latest PT before creating the database.
    Just be aware, all the Peoplesoft application 9 (I assume you want FSCM9.0) have been delivered within Peopltools 8.48, that means you'll have to upgrade your database to the latest version of the Peopletools (the one you are installing) immediately after the database creation/load. Follow the dedicated chapter in the Peopletools install guide.
    Nicolas.

  • Creation parameters not taking effect after database creation in 10.1.0.4

    I created a database using DBCA, changed the default nls settings, then finished the database creation.
    The alert log reports the parameters as different than the defaults
    However, when starting the instance, the nls parameters are only set at the instance level and not the database level.
    Has anyone seen something similar in 10.1.0.4?
    Thanks

    Found this in Oracle Doc,
    NLS_DATABASE_PARAMETERS is the one you set when you do Create Database.
    NLS_INSTANCE_PARAMETERS is the one you set in your spfile when you start instance.
    So if you didn't set NLS_INSTANCE_PARAMETERS in spfile, then instance will start with NLS_DATABASE_PARAMETERS
    And alter session will over write them all.
    It's not new behavior in 10.2.0.4
    ==============================================
    NLS Database Parameters
    When a new database is created during the execution of the CREATE DATABASE statement, the NLS-related database configuration is established. The current NLS instance parameters are stored in the data dictionary along with the database and national character sets. The NLS instance parameters are read from the initialization parameter file at instance startup.
    You can find the values for NLS parameters by using:
    NLS Data Dictionary Views
    NLS Dynamic Performance Views
    OCINlsGetInfo() Function
    NLS Data Dictionary Views
    Applications can check the session, instance, and database NLS parameters by querying the following data dictionary views:
    NLS_SESSION_PARAMETERS shows the NLS parameters and their values for the session that is querying the view. It does not show information about the character set.
    NLS_INSTANCE_PARAMETERS shows the current NLS instance parameters that have been explicitly set and the values of the NLS instance parameters.
    NLS_DATABASE_PARAMETERS shows the values of the NLS parameters for the database. The values are stored in the database.

  • Database Crashing after successful restarts

    Hi Guys,
    I am sort stuck in a process where my DB is starting but after a few seconds its starts shutting down all the processes.  The system was running perfectly before but after todays restart this is all happening.
    the following is the log from the startup to shutdown. Can any one help to figure out what is causing this issue.
    This is ORACLE 11G on Enterprise LINUX._
    Mon Aug 13 13:12:28 2012
    Starting ORACLE instance (normal)
    ****************** Large Pages Information *****************
    Total Shared Global Region in Large Pages = 0 KB (0%)
    Large Pages used by this instance: 0 (0 KB)
    Large Pages unused system wide = 0 (0 KB) (alloc incr 16 MB)
    Large Pages configured system wide = 0 (0 KB)
    Large Page size = 2048 KB
    RECOMMENDATION:
    Total Shared Global Region size is 4098 MB. For optimal performance,
    prior to the next instance restart increase the number
    of unused Large Pages by atleast 2049 2048 KB Large Pages (4098 MB)
    system wide to get 100% of the Shared
    Global Region allocated with Large pages
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Shared memory segment for instance monitoring created
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =28
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up:
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production.
    ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
    System name:     Linux
    Node name:     OM5000
    Release:     2.6.18-308.el5
    Version:     #1 SMP Fri Jan 27 17:17:51 EST 2012
    Machine:     x86_64
    Using parameter settings in client-side pfile /u01/app/oracle/admin/OML5K/pfile/init.ora on machine OM5000
    System parameters with non-default values:
    processes = 150
    nls_language = "ENGLISH"
    nls_territory = "AUSTRALIA"
    sga_target = 4G
    control_files = "/u01/app/oracle/oradata/OML5K/control01.ctl"
    control_files = "/u01/app/oracle/fast_recovery_area/OML5K/control02.ctl"
    db_block_size = 8192
    compatible = "11.2.0.0.0"
    db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
    db_recovery_file_dest_size= 50000M
    undo_tablespace = "UNDOTBS1"
    remote_login_passwordfile= "EXCLUSIVE"
    db_domain = ""
    dispatchers = "(PROTOCOL=TCP) (SERVICE=OML5KXDB)"
    audit_file_dest = "/u01/app/oracle/admin/OML5K/adump"
    audit_trail = "DB"
    db_name = "OML5K"
    open_cursors = 300
    pga_aggregate_target = 34558M
    diagnostic_dest = "/u01/app/oracle"
    Mon Aug 13 13:12:28 2012
    PMON started with pid=2, OS id=21976
    Mon Aug 13 13:12:28 2012
    PSP0 started with pid=3, OS id=21978
    Mon Aug 13 13:12:29 2012
    VKTM started with pid=4, OS id=21980 at elevated priority
    VKTM running at (1)millisec precision with DBRM quantum (100)ms
    Mon Aug 13 13:12:29 2012
    GEN0 started with pid=5, OS id=21984
    Mon Aug 13 13:12:29 2012
    DIAG started with pid=6, OS id=21986
    Mon Aug 13 13:12:29 2012
    DBRM started with pid=7, OS id=21988
    Mon Aug 13 13:12:29 2012
    DIA0 started with pid=8, OS id=21990
    Mon Aug 13 13:12:29 2012
    MMAN started with pid=9, OS id=21992
    Mon Aug 13 13:12:29 2012
    DBW0 started with pid=10, OS id=21994
    Mon Aug 13 13:12:30 2012
    DBW1 started with pid=11, OS id=21996
    Mon Aug 13 13:12:30 2012
    DBW2 started with pid=12, OS id=21998
    Mon Aug 13 13:12:30 2012
    DBW3 started with pid=13, OS id=22000
    Mon Aug 13 13:12:30 2012
    LGWR started with pid=14, OS id=22002
    Mon Aug 13 13:12:30 2012
    CKPT started with pid=15, OS id=22004
    Mon Aug 13 13:12:30 2012
    SMON started with pid=16, OS id=22006
    Mon Aug 13 13:12:30 2012
    RECO started with pid=17, OS id=22008
    Mon Aug 13 13:12:30 2012
    MMON started with pid=18, OS id=22010
    Mon Aug 13 13:12:30 2012
    MMNL started with pid=19, OS id=22012
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    starting up 1 shared server(s) ...
    ORACLE_BASE from environment = /u01/app/oracle
    Mon Aug 13 13:12:30 2012
    kcbztek_populate_tbskey: db key in controlfile and datafile 1 is inconsistent..
    Full restore complete of datafile 4 to datafile copy /u01/app/oracle/oradata/OML5K/users01.dbf. Elapsed time: 0:00:00
    checkpoint is 995547
    last deallocation scn is 3
    Full restore complete of datafile 3 to datafile copy /u01/app/oracle/oradata/OML5K/undotbs01.dbf. Elapsed time: 0:00:00
    checkpoint is 995547
    last deallocation scn is 3
    Mon Aug 13 13:13:00 2012
    Full restore complete of datafile 2 to datafile copy /u01/app/oracle/oradata/OML5K/sysaux01.dbf. Elapsed time: 0:00:30
    checkpoint is 995547
    last deallocation scn is 995211
    Full restore complete of datafile 1 to datafile copy /u01/app/oracle/oradata/OML5K/system01.dbf. Elapsed time: 0:00:38
    checkpoint is 995547
    last deallocation scn is 993074
    Mon Aug 13 13:13:08 2012
    Create controlfile reuse set database "OML5K"
    MAXINSTANCES 8
    MAXLOGHISTORY 1
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    Datafile
    '/u01/app/oracle/oradata/OML5K/system01.dbf',
    '/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
    '/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
    '/u01/app/oracle/oradata/OML5K/users01.dbf'
    LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
    GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
    GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
    WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
    Default Temporary Tablespace will be necessary for a locally managed database in future release
    Mon Aug 13 13:13:08 2012
    Successful mount of redo thread 1, with mount id 3547719972
    Completed: Create controlfile reuse set database "OML5K"
    MAXINSTANCES 8
    MAXLOGHISTORY 1
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    Datafile
    '/u01/app/oracle/oradata/OML5K/system01.dbf',
    '/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
    '/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
    '/u01/app/oracle/oradata/OML5K/users01.dbf'
    LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
    GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
    GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
    Shutting down instance (immediate)
    Shutting down instance: further logons disabled
    Stopping background process MMNL
    Stopping background process MMON
    License high water mark = 1
    All dispatchers and shared servers shutdown
    ALTER DATABASE CLOSE NORMAL
    ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
    ALTER DATABASE DISMOUNT
    Shutting down archive processes
    Archiving is disabled
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Mon Aug 13 13:13:11 2012
    Stopping background process VKTM
    Mon Aug 13 13:13:13 2012
    Instance shutdown complete
    Mon Aug 13 13:13:13 2012
    Starting ORACLE instance (normal)
    ****************** Large Pages Information *****************
    Total Shared Global Region in Large Pages = 0 KB (0%)
    Large Pages used by this instance: 0 (0 KB)
    Large Pages unused system wide = 0 (0 KB) (alloc incr 16 MB)
    Large Pages configured system wide = 0 (0 KB)
    Large Page size = 2048 KB
    RECOMMENDATION:
    Total Shared Global Region size is 4098 MB. For optimal performance,
    prior to the next instance restart increase the number
    of unused Large Pages by atleast 2049 2048 KB Large Pages (4098 MB)
    system wide to get 100% of the Shared
    Global Region allocated with Large pages
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =28
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up:
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production.
    ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
    System name:     Linux
    Node name:     OM5000
    Release:     2.6.18-308.el5
    Version:     #1 SMP Fri Jan 27 17:17:51 EST 2012
    Machine:     x86_64
    Using parameter settings in client-side pfile /u01/app/oracle/cfgtoollogs/dbca/OML5K/initOML5KTemp.ora on machine OM5000
    System parameters with non-default values:
    processes = 150
    nls_language = "ENGLISH"
    nls_territory = "AUSTRALIA"
    sga_target = 4G
    control_files = "/u01/app/oracle/oradata/OML5K/control01.ctl"
    control_files = "/u01/app/oracle/fast_recovery_area/OML5K/control02.ctl"
    db_block_size = 8192
    compatible = "11.2.0.0.0"
    db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
    db_recovery_file_dest_size= 50000M
    norecovery_through_resetlogs= TRUE
    undo_tablespace = "UNDOTBS1"
    remote_login_passwordfile= "EXCLUSIVE"
    db_domain = ""
    dispatchers = "(PROTOCOL=TCP) (SERVICE=OML5KXDB)"
    audit_file_dest = "/u01/app/oracle/admin/OML5K/adump"
    audit_trail = "DB"
    db_name = "OML5K"
    open_cursors = 300
    pga_aggregate_target = 34558M
    diagnostic_dest = "/u01/app/oracle"
    Mon Aug 13 13:13:14 2012
    PMON started with pid=2, OS id=22030
    Mon Aug 13 13:13:14 2012
    PSP0 started with pid=3, OS id=22032
    Mon Aug 13 13:13:15 2012
    VKTM started with pid=4, OS id=22034 at elevated priority
    VKTM running at (1)millisec precision with DBRM quantum (100)ms
    Mon Aug 13 13:13:15 2012
    GEN0 started with pid=5, OS id=22038
    Mon Aug 13 13:13:15 2012
    DIAG started with pid=6, OS id=22040
    Mon Aug 13 13:13:15 2012
    DBRM started with pid=7, OS id=22042
    Mon Aug 13 13:13:15 2012
    DIA0 started with pid=8, OS id=22044
    Mon Aug 13 13:13:15 2012
    MMAN started with pid=9, OS id=22046
    Mon Aug 13 13:13:15 2012
    DBW0 started with pid=10, OS id=22048
    Mon Aug 13 13:13:15 2012
    DBW1 started with pid=11, OS id=22050
    Mon Aug 13 13:13:15 2012
    DBW2 started with pid=12, OS id=22052
    Mon Aug 13 13:13:15 2012
    DBW3 started with pid=13, OS id=22054
    Mon Aug 13 13:13:15 2012
    LGWR started with pid=14, OS id=22056
    Mon Aug 13 13:13:15 2012
    CKPT started with pid=15, OS id=22058
    Mon Aug 13 13:13:15 2012
    SMON started with pid=16, OS id=22060
    Mon Aug 13 13:13:15 2012
    RECO started with pid=17, OS id=22062
    Mon Aug 13 13:13:15 2012
    MMON started with pid=18, OS id=22064
    Mon Aug 13 13:13:15 2012
    MMNL started with pid=19, OS id=22066
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    starting up 1 shared server(s) ...
    ORACLE_BASE from environment = /u01/app/oracle
    Mon Aug 13 13:13:15 2012
    Create controlfile reuse set database "OML5K"
    MAXINSTANCES 8
    MAXLOGHISTORY 1
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    Datafile
    '/u01/app/oracle/oradata/OML5K/system01.dbf',
    '/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
    '/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
    '/u01/app/oracle/oradata/OML5K/users01.dbf'
    LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
    GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
    GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
    WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
    Default Temporary Tablespace will be necessary for a locally managed database in future release
    Successful mount of redo thread 1, with mount id 3547724076
    Completed: Create controlfile reuse set database "OML5K"
    MAXINSTANCES 8
    MAXLOGHISTORY 1
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    Datafile
    '/u01/app/oracle/oradata/OML5K/system01.dbf',
    '/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
    '/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
    '/u01/app/oracle/oradata/OML5K/users01.dbf'
    LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
    GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
    GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
    Stopping background process MMNL
    Stopping background process MMON
    Starting background process MMON
    Starting background process MMNL
    Mon Aug 13 13:13:18 2012
    MMON started with pid=18, OS id=22077
    Mon Aug 13 13:13:18 2012
    MMNL started with pid=19, OS id=22079
    ALTER SYSTEM enable restricted session;
    alter database "OML5K" open resetlogs
    RESETLOGS after incomplete recovery UNTIL CHANGE 995547
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Clearing online redo logfile 1 /u01/app/oracle/oradata/OML5K/redo01.log
    Clearing online log 1 of thread 1 sequence number 0
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Mon Aug 13 13:13:18 2012
    Checker run found 1 new persistent data failures
    Clearing online redo logfile 1 complete
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Clearing online redo logfile 2 /u01/app/oracle/oradata/OML5K/redo02.log
    Clearing online log 2 of thread 1 sequence number 0
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Clearing online redo logfile 2 complete
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 3 of thread 1
    ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Clearing online redo logfile 3 /u01/app/oracle/oradata/OML5K/redo03.log
    Clearing online log 3 of thread 1 sequence number 0
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 3 of thread 1
    ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
    ORA-00313: open failed for members of log group 3 of thread 1
    ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    Clearing online redo logfile 3 complete
    Online log /u01/app/oracle/oradata/OML5K/redo01.log: Thread 1 Group 1 was previously cleared
    Online log /u01/app/oracle/oradata/OML5K/redo02.log: Thread 1 Group 2 was previously cleared
    Online log /u01/app/oracle/oradata/OML5K/redo03.log: Thread 1 Group 3 was previously cleared
    Setting recovery target incarnation to 2
    Assigning activation ID 3547724076 (0xd375f92c)
    Thread 1 opened at log sequence 1
    Current log# 1 seq# 1 mem# 0: /u01/app/oracle/oradata/OML5K/redo01.log
    Successful open of redo thread 1
    SMON: enabling cache recovery
    [22071] Successfully onlined Undo Tablespace 2.
    Undo initialization finished serial:0 start:256557774 end:256557834 diff:60 (0 seconds)
    Dictionary check beginning
    Tablespace 'TEMP' #3 found in data dictionary,
    but not in the controlfile. Adding to controlfile.
    Dictionary check complete
    Verifying file header compatibility for 11g tablespace encryption..
    Verifying 11g file header compatibility for tablespace encryption completed
    SMON: enabling tx recovery
    WARNING: The following temporary tablespaces contain no files.
    This condition can occur when a backup controlfile has
    been restored. It may be necessary to add files to these
    tablespaces. That can be done using the SQL statement:
    ALTER TABLESPACE <tablespace_name> ADD TEMPFILE
    Alternatively, if these temporary tablespaces are no longer
    needed, then they can be dropped.
    Empty temporary tablespace: TEMP
    Database Characterset is US7ASCII
    Create Relation IPS_PACKAGE_UNPACK_HISTORY
    No Resource Manager plan active
    WARNING: Files may exists in db_recovery_file_dest
    that are not known to the database. Use the RMAN command
    CATALOG RECOVERY AREA to re-catalog any such files.
    If files cannot be cataloged, then manually delete them
    using OS command.
    One of the following events caused this:
    1. A backup controlfile was restored.
    2. A standby controlfile was restored.
    3. The controlfile was re-created.
    4. db_recovery_file_dest had previously been enabled and
    then disabled.
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    Mon Aug 13 13:13:20 2012
    QMNC started with pid=24, OS id=22087
    LOGSTDBY: Validating controlfile with logical metadata
    LOGSTDBY: Validation complete
    Global Name changed to OML5K
    Completed: alter database "OML5K" open resetlogs
    alter database rename global_name to "OML5K"
    Completed: alter database rename global_name to "OML5K"
    ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
    Completed: ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
    ALTER DATABASE DEFAULT TABLESPACE "USERS"
    Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
    alter database character set INTERNAL_CONVERT ZHS16GBK
    Starting background process CJQ0
    Mon Aug 13 13:13:22 2012
    CJQ0 started with pid=23, OS id=22089
    Mon Aug 13 13:13:23 2012
    db_recovery_file_dest_size of 50000 MB is 0.00% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Mon Aug 13 13:13:27 2012
    Thread 1 advanced to log sequence 2 (LGWR switch)
    Current log# 2 seq# 2 mem# 0: /u01/app/oracle/oradata/OML5K/redo02.log
    Mon Aug 13 13:13:30 2012
    Updating character set in controlfile to ZHS16GBK
    Synchronizing connection with database character set information
    SYS.RULE$ (CONDITION) - CLOB representation altered
    SYS.SCHEDULER$_EVENT_LOG (ADDITIONAL_INFO) - CLOB representation altered
    SYS.SNAP$ (REL_QUERY) - CLOB representation altered
    SYS.SNAP$ (ALIAS_TXT) - CLOB representation altered
    SYS.WRI$_ADV_OBJECTS (ATTR4) - CLOB representation altered
    SYS.WRI$_ADV_OBJECTS (OTHER) - CLOB representation altered
    SYS.WRI$_ADV_DIRECTIVE_META (DATA) - CLOB representation altered
    SYS.WRI$_DBU_FEATURE_METADATA (INST_CHK_LOGIC) - CLOB representation altered
    SYS.WRI$_DBU_FEATURE_METADATA (USG_DET_LOGIC) - CLOB representation altered
    SYS.WRI$_DBU_HWM_METADATA (LOGIC) - CLOB representation altered
    SYS.WRI$_OPTSTAT_HISTHEAD_HISTORY (EXPRESSION) - CLOB representation altered
    Mon Aug 13 13:13:30 2012
    Starting background process SMCO
    Mon Aug 13 13:13:30 2012
    SMCO started with pid=27, OS id=22098
    SYS.WRI$_REPT_FILES (SYS_NC00005$) - CLOB representation altered
    SYS.SUM$ (SRC_STMT) - CLOB representation altered
    SYS.SUM$ (DEST_STMT) - CLOB representation altered
    SYS.ATTRIBUTE_TRANSFORMATIONS$ (XSL_TRANSFORMATION) - CLOB representation altered
    SYS.METASTYLESHEET (STYLESHEET) - CLOB representation altered
    XDB.XDB$RESOURCE (SYS_NC00027$) - CLOB representation altered
    XDB.XDB$XDB_READY (DATA) - CLOB representation altered
    XDB.XDB$DXPTAB (SYS_NC00006$) - CLOB representation altered
    MDSYS.SDO_XML_SCHEMAS (XMLSCHEMA) - CLOB representation altered
    Thread 1 advanced to log sequence 3 (LGWR switch)
    Current log# 3 seq# 3 mem# 0: /u01/app/oracle/oradata/OML5K/redo03.log
    Mon Aug 13 13:13:43 2012
    MDSYS.SDO_COORD_OP_PARAM_VALS (PARAM_VALUE_FILE) - CLOB representation altered
    MDSYS.SDO_GEOR_XMLSCHEMA_TABLE (XMLSCHEMA) - CLOB representation altered
    MDSYS.SDO_STYLES_TABLE (DEFINITION) - CLOB representation altered
    SYSMAN.MGMT_IP_ELEM_DEFAULT_PARAMS (VALUE) - CLOB representation altered
    SYSMAN.MGMT_IP_REPORT_ELEM_PARAMS (VALUE) - CLOB representation altered
    SYSMAN.MGMT_IP_SQL_STATEMENTS (SQL_STATEMENT) - CLOB representation altered
    SYSMAN.MGMT_JOB_LARGE_PARAMS (PARAM_VALUE) - CLOB representation altered
    SYSMAN.MGMT_SEC_INFO (B64_LOCAL_CA) - CLOB representation altered
    SYSMAN.MGMT_SEC_INFO (B64_INTERNET_CA) - CLOB representation altered
    APEX_030200.WWV_FLOW_FLASH_CHARTS (CHART_XML) - CLOB representation altered
    APEX_030200.WWV_FLOW_FLASH_CHART_SERIES (SERIES_QUERY) - CLOB representation altered
    APEX_030200.WWV_FLOW_SHORTCUTS (SHORTCUT) - CLOB representation altered
    APEX_030200.WWV_FLOW_STEPS (HELP_TEXT) - CLOB representation altered
    APEX_030200.WWV_FLOW_STEPS (HTML_PAGE_HEADER) - CLOB representation altered
    APEX_030200.WWV_FLOW_STEP_PROCESSING (PROCESS_SQL_CLOB) - CLOB representation altered
    APEX_030200.WWV_FLOW_PAGE_GENERIC_ATTR (ATTRIBUTE_VALUE) - CLOB representation altered
    APEX_030200.WWV_FLOW_TEMPLATES (HEADER_TEMPLATE) - CLOB representation altered
    APEX_030200.WWV_FLOW_TEMPLATES (FOOTER_TEMPLATE) - CLOB representation altered
    APEX_030200.WWV_FLOW_TEMPLATES (BOX) - CLOB representation altered
    Mon Aug 13 13:13:54 2012
    Thread 1 cannot allocate new log, sequence 4
    Checkpoint not complete
    Current log# 3 seq# 3 mem# 0: /u01/app/oracle/oradata/OML5K/redo03.log
    Mon Aug 13 13:13:57 2012
    APEX_030200.WWV_FLOW_PAGE_PLUGS (PLUG_SOURCE) - CLOB representation altered
    Thread 1 advanced to log sequence 4 (LGWR switch)
    Current log# 1 seq# 4 mem# 0: /u01/app/oracle/oradata/OML5K/redo01.log
    APEX_030200.WWV_FLOW_PAGE_PLUGS (CUSTOM_ITEM_LAYOUT) - CLOB representation altered
    APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE) - CLOB representation altered
    APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE2) - CLOB representation altered
    APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE3) - CLOB representation altered
    APEX_030200.WWV_FLOW_PROCESSING (PROCESS_SQL_CLOB) - CLOB representation altered
    APEX_030200.WWV_FLOW_REGION_REPORT_COLUMN (PK_COL_SOURCE) - CLOB representation altered
    APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE1) - CLOB representation altered
    APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE2) - CLOB representation altered
    APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE3) - CLOB representation altered
    APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE4) - CLOB representation altered
    APEX_030200.WWV_FLOW_BANNER (BANNER) - CLOB representation altered
    APEX_030200.WWV_FLOW_BUTTON_TEMPLATES (TEMPLATE) - CLOB representation altered
    APEX_030200.WWV_FLOW_INSTALL (DEINSTALL_SCRIPT) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_CURRENT) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_NONCURRENT) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_CURRENT) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_NONCURRENT) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_CURR_W_CHILD) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_NONCURR_W_CHILD) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_CURR_W_CHILD) - CLOB representation altered
    APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_NONCURR_W_CHILD) - CLOB representation altered
    APEX_030200.WWV_FLOW_WORKSHEETS (SQL_QUERY) - CLOB representation altered
    Mon Aug 13 13:14:08 2012
    APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PAGE_SENTRY_FUNCTION) - CLOB representation altered
    APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (SESS_VERIFY_FUNCTION) - CLOB representation altered
    APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PRE_AUTH_PROCESS) - CLOB representation altered
    APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (AUTH_FUNCTION) - CLOB representation altered
    APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (POST_AUTH_PROCESS) - CLOB representation altered
    Refreshing type attributes with new character set information
    Completed: alter database character set INTERNAL_CONVERT ZHS16GBK
    Mon Aug 13 13:14:11 2012
    ALTER SYSTEM disable restricted session;
    Mon Aug 13 13:14:12 2012
    Thread 1 advanced to log sequence 5 (LGWR switch)
    Current log# 2 seq# 5 mem# 0: /u01/app/oracle/oradata/OML5K/redo02.log
    Mon Aug 13 13:14:28 2012
    Shutting down instance (immediate)
    Stopping background process SMCO
    Shutting down instance: further logons disabled
    Stopping background process QMNC
    Mon Aug 13 13:14:29 2012
    Stopping background process CJQ0
    Stopping background process MMNL
    Stopping background process MMON
    License high water mark = 14
    Stopping Job queue slave processes, flags = 7
    Job queue slave processes stopped
    All dispatchers and shared servers shutdown
    ALTER DATABASE CLOSE NORMAL
    Mon Aug 13 13:14:33 2012
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Mon Aug 13 13:14:33 2012
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Thread 1 closed at log sequence 5
    Successful close of redo thread 1
    Completed: ALTER DATABASE CLOSE NORMAL
    ALTER DATABASE DISMOUNT
    Shutting down archive processes
    Archiving is disabled
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Mon Aug 13 13:14:34 2012
    Stopping background process VKTM
    System State dumped to trace file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22163.trc
    Mon Aug 13 13:14:36 2012
    Instance shutdown complete
    Mon Aug 13 13:14:37 2012
    Starting ORACLE instance (normal)

    All the mesages are dated "Aug 13" which is quite a few months ago ! I see no recent messages.
    You have two CREATE CONTROLFILE calls and one alter database character set INTERNAL_CONVERT ZHS16GBK call.
    Were these part of a Database Creation using DBCA (The Database Creation Assistant) ?
    Hemant K Chitale

  • While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

    Hi Friends,
    OS = Windows XP 3
    Database = Oracle 11g R2 32 bit
    Processor= intel p4 2.86 Ghz
    Ram = 2 gb
    Virtual memory = 4gb
    I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it..... 
    ORA-28056: Writing audit records to Windows Event Log failed Error  and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
    Please some one help me out, as i need to install on the same machine .....
    Thanks and Regards

    AAP wrote:
    Thanks Now I am able to Create a database , but with one error,
    When I created a database using DBCA, at the last stage I got this error,
    Database Configuration Assistant : Warning
    Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it.  Start the listener & Registered database service & run EM Configuration Assistant again....
    But when I checked the listener was up.....
    Now what was the problem,  I am able to connect and work through sqlplus,
    But  I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
    Thanks & Regards
    Creation of the dbcontrol requires a connection via the listener.  When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete.  Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
    Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)?  That needs to be the first order of business.

  • Database creation fail in ASM Storage

    Hi,
    In Suse Linux, we installed the Grid Infra Standalone Server & Database. After ASM Instance started, in ASM instance v$asm_diskgroup shows the DATA diskgroup was mounted. But from Database Instance when we query the v$asm_diskgroup show "no row selected".
    When i try to create database using DBCA or manualy creation i'm getting following error.
    ORA-01501: Create Database Failed
    ORA-00200: Control file could not be created
    ORA-00202: Control file : '+DATA'
    ora--17502: ksfdcre:4 Failed to create file '+DATA'
    ora--15055: unable to connect to ASM instance
    ora-27140: attach to post/wait facility failed
    ora-27300: OS system dependent operation: invalid_egid failed with status: 1
    ora-27301: OS failure message: Operation not permitted
    with Regards,
    Baalaji V

    Did you install Grid infra as Oracle user or different user?
    In case of different user, does oracle user and grid infra should share same admin group.
    This is what I did on OLE 5.0
    # groupadd -g 1000 oinstall
    # groupadd -g 1100 asmadmin
    # groupadd -g 1200 dba
    # groupadd -g 1201 oper
    # groupadd -g 1300 asmdba
    # groupadd -g 1301 asmoper
    # mkdir –p /u01/apps/grid
    # mkdir -p /u01/apps/oracle
    # useradd -u 1100 -g oinstall -G dba,asmdba,asmoper -d /home/grid grid
    # useradd -u 1001 -g oinstall -G dba,asmadmin,asmdba,asmoper -d /home/oracle oracle
    # chown -R grid:oinstall /u01/apps/grid
    # chmod -R 775 /u01
    # chown oracle:oinstall /u01/apps/oracle
    as GRID user I had installed Grid Infra and created ASM instance and as ORACLE user I had created a database. One more thing listener is running under Grid Infra not under Oracle RDBMS.
    Even after this I did get some permission issue not able to access orainventory etc., but then what was fixed then and there.
    Hope this helps.
    rdgs,
    Kamalesh JK
    jkkstar inc

  • JumpStartKit install hangs at 87% complete during database creation / instance configuration

    Hello folks, I'm wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already gave a quick try in the VDI provided by Oracle).
    So I found out about this Jump Start Kit, which installs each required piece once you've got a properly configured Linux environment. I had some fun with the prereqs but now that's all completed and I got SO EXCITED to make it past "STEP 4".
    So now I'm encountering the same issue during installation -- in STEP 6 of 22 Configuration of Database Instance (Completing Database Creation) it gets to 87% complete and then nothing seems to happen, it never gets beyond that point even if I wait 10 more hours:
    NOTE: I suspect my issue is not specific to the "Jump Start Kit", but rather it is something others have encountered during the Database creation/configuration step of the Oracle Universal Installer in general. And hopefully others have solved it.
    "/opt/oracle/portal" is my INSTALL_DIR ; I had launched the JSK installer with this command:
    ./runme INSTANCE_PASSWORD=apwd ROOT_PASSWORD=rpwd DOWNLOAD_DIR=/media/sf_Downloads/JSKfiles INSTALL_DIR=/opt/oracle/portal
    - The installer makes it this far, before it seems to get "stuck" -- even after many hours there is no change, HD is not doing anything, CPU stays at <5% usage:
    rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
    10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
    10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
    10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
    10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
    10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
    10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
    10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
    10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
    10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
    10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
    10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
    10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
    10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
    10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
    10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
    10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
    10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
    10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
    10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
    10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
    10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
    10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
    10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
    I am using VirtualBox on Windows 7, I have tried it multiple times, first with the guest OS as Oracle Linux 6, and then Oracle Linux 5 (fun learning about updating the version of Java!).
    It always gets to the same point and then it just seems to do nothing -- no progress, but no error message on-screen (see log files below). But it seems to be using less than 5% CPU usage... and waiting 10 hours makes no difference.
    Based on what I found in tons of Google searching, I tried increasing my swap file, adding more memory and HD space (12GB RAM and 10GB sap and 20GB free hard drive space) but still nothing changed.
    In post #2 of this thread I will separately provide the logging details, which I hope will be helpful.
    Thanks in advance!
    Darren.
    PS: moderator, I attempted to create this thread in other Spaces because I did not know about this "Portal JSK" specific one -- was that why my thread was rejected? NO REASON WAS GIVEN. If that WAS the reason, I have to say that it will be nearly impossible for anyone who is able to help me to actually FIND this thread here because as I said I do not think it specific to ONLY the Portal JSK. (But I will post it only here just in case that's the reason for the previous rejections)

    First off, thank you very much for not just deleting the other 2 threads -- I intentionally created them in the other 2 spaces that MIGHT find a set of eyes that can help -- but in both I linked to THIS thread because this is the specific product. So this is the only place replies will be found therefore no "duplication" to worry about... but as I said this is likely not specific to PortalJSK since others on the internet have described a similar problem during the Oracle database installation.
    Second of all. here we go, the log contents...
    ...So in the hope that I could troubleshoot based on some error logging, I had a look inside "/opt/oracle/portal/db/OraInventory/logs/"...
    - "/opt/oracle/portal/db/OraInventory/logs/oraInstall2014-06-10_03-27-37PM.err" is empty (0 bytes),
    - "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log" * (2.3MB) ends with...
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    INFO: Successfully executed the flow in SILENT mode
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    INFO: Unloading Setup Driver
    [eof]
    I am not sure of the value of the additional log files inside "/opt/oracle/run/logs/", here is what they contain...
    - all of the "/opt/oracle/run/logs/xyz_NofN.zip.unzip.out" files are empty (0 bytes).
    - "/opt/oracle/run/logs/install_commands.log" is tiny, it just has this:
    /media/sf_Downloads/JSKfiles/DB/database/runInstaller -invPtrLoc /opt/oracle/run/linux64/dborainst.loc  -ignoreSysPrereqs  -ignorePrereq -force -silent -waitforcompletion -responseFile /opt/oracle/run/linux64/db_generated.rsp
    /opt/oracle/portal/db/ohome/bin/netca /orahome /opt/oracle/portal/db/ohome /orahnam orcl /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /responseFile /opt/oracle/run/linux64/netca.rsp /silent
    /opt/oracle/portal/db/ohome/bin/dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp  -sampleSchema true -oratabLocation ORATAB
    - "webtier_prereqs.log" and "ecm_prereqs.log" and "wcprereqs.log" all say that all tests passed.
    (Tests for HD and RAM space and swap size and # of processes etc. are all SUCCESS; and all required packages are installed and high enough version, etc.)
    - "/opt/oracle/run/logs/dbprereqs_log.txt" says this:
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 120 MB.   Actual 8855 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 4031 MB    Passed
    Preparing to launch Oracle Universal Installer from /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-26-23PM. Please wait ...[WARNING] [INS-13014] Target environment do not meet some optional requirements.
       CAUSE: Some of the optional prerequisites are not met. See logs for details. /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log
       ACTION: Identify the list of failed prerequisite checks from the log: /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
    - "/opt/oracle/run/logs/wls-install.log" is the most confusing, maybe this is the reason for getting "stuck"?
    2014-06-10 15:24:38,139 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
    2014-06-10 15:24:38,143 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
    2014-06-10 15:24:38,206 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
    2014-06-10 15:24:38,209 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
    2014-06-10 15:24:38,225 WARN  [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - /opt/oracle/portal/fmw directory is not empty. Proceed with installation?
    2014-06-10 15:24:39,223 WARN  [ocmCredVerify] com.bea.plateng.wizard.installer.helpers.OCMInstallHelper - Failed test connection
    java.lang.reflect.InvocationTargetException
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:92)
      at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
      at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
      at java.lang.Thread.run(Thread.java:662)
    Caused by: com.bea.plateng.wizard.installer.helpers.OCMException: Connection failed in SSL peer verificaition.
      at com.bea.plateng.wizard.installer.helpers.OCMHelper.testSimpleConnection(OCMHelper.java:54)
      at com.bea.plateng.wizard.installer.helpers.OCMHelper.testConnection(OCMHelper.java:145)
      ... 8 more
    2014-06-10 15:24:39,228 WARN  [ocmCredVerify] com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask - OCMInstallException:
    com.bea.plateng.wizard.installer.helpers.OCMInstallException
      at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:96)
      at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
      at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
      at java.lang.Thread.run(Thread.java:662)
    2014-06-10 15:25:49,347 INFO  [Thread-13] com.oracle.cie.domain.TemplateImporter - Domain Extension Successful!
    2014-06-10 15:25:49,350 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-06-10 15:25:49,351 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-06-10 15:25:49,351 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
    2014-06-10 15:25:49,405 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
    2014-06-10 15:25:49,405 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: update domain
    2014-06-10 15:25:49,406 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-06-10 15:25:49,406 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-06-10 15:25:49,743 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull!
    ^ ^ ^ BUT IT SEEMS TO END AS A "SUCCESS"!?
    - "install_setup.log" ends with the following -- and so does "JSKDownloader.log" (the "master log"? it contains basically what shows up on-screen)
    rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
    10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
    10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
    10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
    10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
    10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
    10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
    10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
    10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
    10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
    10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
    10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
    10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
    10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
    10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
    10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
    10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
    10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
    10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
    10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
    10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
    10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
    10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
    10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
    * Here are the final 261 lines of "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log"...
    INFO: Start output from spawned process:
    INFO: ----------------------------------
    INFO:
    INFO: SaveInvWCCE JRE files in Scratch
    INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
    INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
    INFO: Config Initialize JRE files in Scratch
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Configuration Manager
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: HAS Common Files
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Netca Client
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Database 11g
    INFO: The Top level Aggreage File = /opt/oracle/portal/db/ohome/inventory/ContentsXML/ConfigXML/oracle.server.11_2_0_1_0.xml
    INFO: OUI_CAPlugIn is not found in XML
    INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
    INFO: cf session will be created for OH: /opt/oracle/portal/db/ohome/ TLAggr: oracle.server instancePath: inventory/ContentsXML/ConfigXML/
    INFO: cf session for OH: /opt/oracle/portal/db/ohome/ TL Aggr: [oracle.server] instancePath: inventory/ContentsXML/ConfigXML/
    INFO: aggr ref length : 6
    INFO: cf session hashcode: 620301082
    INFO: cf session saved with key: OraDb11g_home1 oracle.server
    INFO: cf session is ok
    INFO: created and saved cf session for oh: OraDb11g_home1
    INFO: passing params to cf
    INFO: Handling the storing of variables for aggr name  oracle.sysman.ccr
    INFO: This variable s_OPSNodeInfoString is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_createResponseFile is not added to the global context map
    INFO: This variable s_ps is not added to the global context map
    INFO: This variable s_oraName is not added to the global context map
    INFO: This variable s_ccrJarDestination is not added to the global context map
    INFO: This variable b_localInstall is not added to the global context map
    INFO: This variable b_doConfigCCR is not added to the global context map
    INFO: This variable b_ccrUpgrade is not added to the global context map
    INFO: This variable s_rspFilePath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: for oracle.has.common no aggregate found by cf: no configuration
    INFO: Handling the storing of variables for aggr name  oracle.assistants.netca.client
    INFO: This variable s_swingallName is not added to the global context map
    INFO: This variable s_shareName is not added to the global context map
    INFO: This variable s_runtimeLib is not added to the global context map
    INFO: This variable s_runTimeJar is not added to the global context map
    INFO: This variable s_responseFileName is not added to the global context map
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_netcfgName is not added to the global context map
    INFO: This variable s_netcahelpName is not added to the global context map
    INFO: This variable s_netcaUpgradeFlag is not added to the global context map
    INFO: This variable s_netcaClass is not added to the global context map
    INFO: This variable s_netCA_Args is not added to the global context map
    INFO: This variable s_netCAInstalledProtocols is not added to the global context map
    INFO: This variable s_netAPIName is not added to the global context map
    INFO: This variable s_ldapclnt9 is not added to the global context map
    INFO: This variable s_ldapclnt11 is not added to the global context map
    INFO: This variable s_ldapclnt10 is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable s_jreJarFile is not added to the global context map
    INFO: This variable s_jreJar is not added to the global context map
    INFO: This variable s_jewtName is not added to the global context map
    INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
    INFO: This variable s_icebrowserName is not added to the global context map
    INFO: This variable s_helpName is not added to the global context map
    INFO: This variable s_ewtcompatName is not added to the global context map
    INFO: This variable s_ewtName is not added to the global context map
    INFO: This variable s_ewtFile is not added to the global context map
    INFO: This variable s_ewtCompat is not added to the global context map
    INFO: This variable s_cfgMethod is not added to the global context map
    INFO: This variable s_caHelpZhTwJar is not added to the global context map
    INFO: This variable s_caHelpZhCnJar is not added to the global context map
    INFO: This variable s_caHelpPtBRJar is not added to the global context map
    INFO: This variable s_caHelpKoJar is not added to the global context map
    INFO: This variable s_caHelpJar is not added to the global context map
    INFO: This variable s_caHelpJaJar is not added to the global context map
    INFO: This variable s_caHelpItJar is not added to the global context map
    INFO: This variable s_caHelpFrJar is not added to the global context map
    INFO: This variable s_caHelpEsJar is not added to the global context map
    INFO: This variable s_caHelpDeJar is not added to the global context map
    INFO: This variable s_authAdaptors is not added to the global context map
    INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
    INFO: This variable b_net8ServerInstalling is not added to the global context map
    INFO: This variable b_javavmIsInstalling is not added to the global context map
    INFO: This variable b_isWindows is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_cmanIsInstalling is not added to the global context map
    INFO: This variable b_anoIsInstalling is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibDir is not added to the global context map
    INFO: This variable s_opsmJlib is not added to the global context map
    INFO: This variable s_ntwkTools is not added to the global context map
    INFO: This variable s_netjlibDir is not added to the global context map
    INFO: This variable s_netcahelpLocation is not added to the global context map
    INFO: This variable s_netcaJlibDir is not added to the global context map
    INFO: This variable s_netcaDocDir is not added to the global context map
    INFO: This variable s_netPropertiesFile is not added to the global context map
    INFO: This variable s_netCA is not added to the global context map
    INFO: This variable s_net8caFileToInstantiate is not added to the global context map
    INFO: This variable s_jre15Location is not added to the global context map
    INFO: This variable s_jlibDir is not added to the global context map
    INFO: This variable s_inventoryPrereqOui is not added to the global context map
    INFO: This variable s_emdwLibDir is not added to the global context map
    INFO: This variable s_caHelpDir is not added to the global context map
    INFO: This variable s_assistantJlibDir is not added to the global context map
    INFO: This variable s_JavaFlag is not added to the global context map
    INFO: This variable b_isOPS is not added to the global context map
    INFO: This variable s_windowsCommandLine is not added to the global context map
    INFO: This variable s_net8caExecutable is not added to the global context map
    INFO: This variable s_netcaUserDirArg is not added to the global context map
    INFO: This variable s_installTypeForNetCA is not added to the global context map
    INFO: This variable s_netcaSilentFlag is not added to the global context map
    INFO: This variable s_netCAInstalledProducts is not added to the global context map
    INFO: This variable s_netcaClasspath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name  oracle.assistants.server
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable pn_dboffset is not added to the global context map
    INFO: This variable cs_swingName is not added to the global context map
    INFO: This variable cs_komodoName is not added to the global context map
    INFO: This variable cs_kodiakName is not added to the global context map
    INFO: This variable cs_jewtName is not added to the global context map
    INFO: This variable cs_iceBrowserName is not added to the global context map
    INFO: This variable cs_ewtcompatName is not added to the global context map
    INFO: This variable cs_ewtName is not added to the global context map
    INFO: This variable cs_baliShareName is not added to the global context map
    INFO: This variable b_orabaseContainsOrahome is not added to the global context map
    INFO: This variable b_isWINDOWS is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
    INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibLocation is not added to the global context map
    INFO: This variable s_oratabLocation is not added to the global context map
    INFO: This variable s_opsmLocation is not added to the global context map
    INFO: This variable s_dbuaLocation is not added to the global context map
    INFO: This variable s_dbcaLocation is not added to the global context map
    INFO: This variable s_OracleBinLocation is not added to the global context map
    INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
    INFO: This variable s_dbcaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name  oracle.sysman.console.db
    INFO: This variable s_sid is not added to the global context map
    INFO: This variable s_serverInstallType is not added to the global context map
    INFO: This variable s_platform is not added to the global context map
    INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
    INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_nlsLang is not added to the global context map
    INFO: This variable s_emailServer is not added to the global context map
    INFO: This variable s_emailAddress is not added to the global context map
    INFO: This variable s_cfgtyperet is not added to the global context map
    INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable n_uploadInterval is not added to the global context map
    INFO: This variable localhost is not added to the global context map
    INFO: This variable b_launchTools is not added to the global context map
    INFO: This variable b_launchBrowser is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_centralConsole is not added to the global context map
    INFO: This variable USE_HTTP_PROXY is not added to the global context map
    INFO: This variable USE_DB_CONSOLE is not added to the global context map
    INFO: This variable SET_CONSOLE_MODE is not added to the global context map
    INFO: This variable SA_SETUP is not added to the global context map
    INFO: This variable OC4JLOC is not added to the global context map
    INFO: This variable NO_PC_MODE is not added to the global context map
    INFO: This variable LOGGING_LEVEL is not added to the global context map
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = /opt/oracle/portal/db/ohome/install/chainedInstall/globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 1
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Number of root scripts to be executed = 1
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <setup>
    WARNING: Validation disabled for the state setup
    INFO: Completed validating state <setup>
    INFO: Verifying route success
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state finish
    INFO: FinishAction Actions.execute called
    INFO: Completed executing action at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <finish>
    WARNING: Validation disabled for the state finish
    INFO: Completed validating state <finish>
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    INFO: Successfully executed the flow in SILENT mode
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    INFO: Unloading Setup Driver
    ----------that is all----------
    re. PROCESSES/TASKS at the ending:
    Also I had a look in System Monitor and noticed there a TON of processes ("Sleeping") that show up in System Monitor at this time of "freezing" or "hanging" or whatever you want to call it (where nothing is visibly happening anymore).
    -The most recent shell script is "install_db_instance.sh" (not surprising) with Waiting Channel "do_wait".
    #!/bin/bash
    export JSK_DIR=${PWD}
    . $JSK_DIR/setup_env.sh
    export ORACLE_HOME=$DB_ORACLE_HOME
    export ORACLE_BASE=$DB_ORACLE_BASE
    echo ""
    #$DB_ORACLE_HOME/bin/dbca -createDatabase -templateName $JSK_DIR/General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword $SCHEMA_PASSWORD -systemPassword $SCHEMA_PASSWORD -emConfiguration LOCAL -dbsnmpPassword $SCHEMA_PASSWORD -sysmanPassword $SCHEMA_PASSWORD -datafileJarLocation $DB_ORACLE_HOME/assistants/dbca/templates/ -storageType FS -datafileDestination $DB_ORACLE_DATA -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -oratabLocation ORATAB -recoveryAreaDestination NO_VALUE -silent
    echo "$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp  -sampleSchema true -oratabLocation ORATAB" >> $LOGS_DIR/install_commands.log
    $ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp  -sampleSchema true -oratabLocation ORATAB
    cat $JSK_DIR/dbca.rsp | grep -v -i PASSWORD > $JSK_DIR/dbca_saved_no_passwords.rsp
    rm -f $JSK_DIR/dbca.rsp
    echo ""
    -Immediately after that is "java" with this Command Line:
    /opt/oracle/portal/db/ohome/jdk/jre/bin/java -DORACLE_HOME=/opt/oracle/portal/db/ohome [parameters] -DJDBC_PROTOCOL=thin -mx128m -classpath /opt/oracle/portal/db/ohome/assistants/dbca/jlib/dbca.jar:[otherJarFiles]:/opt/oracle/portal/db/ohome/dv/jlib/dvca.jar oracle.sysman.assistants.dbca.Dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
    -There are 7 named "oracleorcl" where the Command Line is simply "oracleorcl (LOCAL=NO)" or "oracleorcl (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))" -- Waiting Channel is "sk_wait_data".
    -There are 52 named "oracle" with various similar-looking Command Lines. The Waiting Channel for these varies: "poll_schedule_timeout", or "hrtimer_nanosleep", or "sys_semtimedop" (the 2 highest ProcessIDs -- aka most recent -- have this, with Command Line "ora_w000_orcl" and "xe_w000_XE").
    -There are 3 named "sqlplus", their Command Lines are "/opt/oracle/portal/db/ohome/bin/sqlplus -S -N" (the oldest 2), or "/opt/oracle/portal/db/ohome/bin/sqlplus" (the most recent) -- Waiting Channel is "pipe_wait".
    Message was edited by: DarrenAg (added PROCESSES/TASKS info)

  • Database creation problem on Windows XP

    Hello Readers
    I have installed ORACLE Database Engine on windows XP.
    I am facing problem in database creation.
    I have tryed wizard as well as mannual method.
    in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
    although CD drive is in CR Rom drive.
    Please help me ....
    Rashid Masood Ashraf
    email: [email protected]

    After going to the properties as you suggested:
    Right now the Obtain an IP address automatically is checked
    I need to check the Use the following IP address:
    What should I enter for
    IP address:
    Subnet mask:
    Default gateway:
    Please help.
    Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

  • How to correct close database connection after report generation

    Hello
    I have problem a with alive database connection after report creation and report  closing. How to properly to close connection to database?
    Best regards
    Edited by: punkers84 on Jun 17, 2011 10:38 AM

    that's what I am doing... after viewing the report, I call the close method on the window closing event of the container window. but the connection is still open. I had a lot of other issues with my jdbc driver but after downgrading to an older version those issues are resolved.Only this one is still there! Is there any other way to close the connection (like using dbcontroller or etc.)?

  • Problem during Database Creation of 8.1.7 in Linux7.2

    hello folks,
    i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
    after successful installation,,and after even successfull listener configuration,,
    when database creation assistant is creating database; On 82%
    At "Initializing database"
    it comes::
    ORA-03114: not connected to ORACLE
    and if we keep on ignoring it ,then it comes:
    end of file communication channel.
    plz help me what i would do,,
    regards.

    Hi,
    seems that your oracle database went down. just check if oracle is running or not by using ps command.
    if its not running go to $ prompt and start the database either using sys or internal user i.e
    $svrmgrl
    connect internal
    $startup or startup force
    let me know the result.
    Yogi
    [email protected]

  • Oracle 9i installation hanging in "Clone Database Creation in Process"

    Hi all,
    I have been struggling in installing the 9i in my laptop.
    Here is my setup,
    OS: Windows Server 2003 Enterprise Edition SP2 in VMWare
    Database: Oracle 9i 9.2.0.1.0
    When it automatically comes to "Database Configuration Assistant", there are 4 steps.
    Copying Database files
    Initializing Database
    Creating and starting Oracle Instance
    Completing database creation
    The 1st 3 steps has been completed and the installation just hangs at the last step when the completion rate is 88%.
    Anyone got problem like this ?
    Here are the details I have so far for the DBCA during installation process,
    Listener Control complete.
    Listener start failed. Listener may already be running.
    Listener configuration complete.
    Default local naming configuration complete.
    Oracle Net Services configuration successful. The exit code is 0
    Since I am completely new to installing DB, please help me to get rid of this frustration.
    Thanks !
    Regards,
    Chris

    Capacity Planner 9.2.0.1.0
              Enterprise Manager Events 9.2.0.1.0
              Enterprise Manager Base Classes 9.2.0.1.0
              Required Support Files 9.2.0.1.0
              Enterprise Manager Installation Prerequisite Checks 9.2.0.1.0
              Utilities Common Files 9.2.0.1.0
              Enterprise Manager Quick Tours 9.2.0.1.0
              Oracle Display Fonts 9.0.2.0.0
              regexp 2.0.20.0.0
              Oracle OLAP Worksheet 9.2.0.1.0
              Oracle OLAP API 9.2.0.1.0
              Oracle Developer Server Forms Manager 9.2.0.1.0
              Oracle Intelligent Agent Base Component Files 9.2.0.1.0
              Oracle Internet Directory Client Common Files 9.2.0.1.0
              Sun JDK 1.3.1.0.1a
              Oracle Directory Manager 9.2.0.1.0
              Visigenics ORB 3.4.0.0.0
              Assistant Common Files 9.2.0.1.0
              Enterprise Manager Paging and OMS Common Files 9.2.0.1.0
              XML Parser for C 9.2.0.1.0
              Oracle Net Configuration Assistant 9.2.0.1.0
              Character Set Migration Utility 9.2.0.1.0
              Enterprise Manage Website Translated Files 9.2.0.1.0
              Oracle Net Manager 9.2.0.1.0
              Oracle Net 9.2.0.1.0
              Oracle Perl Interpreter 5.00503.0.0.0c
              Apache Web Server files 1.3.22.0.0a
              Oracle JDBC/OCI Driver for JDK 1.4 9.2.0.1.0
              Database Configuration Assistant 9.2.0.1.0
              Oracle JDBC/OCI Driver for JDK 1.2 9.2.0.1.0
              Oracle INTYPE File Assistant 9.2.0.1.0
              SQLJ Runtime 9.2.0.1.0
              Oracle JDBC/OCI Interfaces 9.2.0.1.0
              Advanced Queueing (AQ) API 9.2.0.1.0
              Oracle Caching Service for Java 2.1.0.0.0a
              Recovery Manager 9.2.0.1.0
              JSDK 2.0.0.0.0d
              Apache JServ 1.1.0.0.0g
              Oracle interMedia Java Client 9.2.0.1.0
              Oracle Java Layout Engine 2.0.1.0.0
              Oracle Administration Assistant for Windows NT 9.2.0.1.0
              Oracle XML SQL Utility 9.2.0.1.0
              SQLJ Translator 9.2.0.1.0
              Enterprise Login Assistant 9.2.0.1.0
              Oracle Services For Microsoft Transaction Server 9.2.0.1.0
              Enterprise Manager Paging Server 9.2.0.1.0
              Oracle Java Tools 9.2.0.1.0
              Oracle ODBC Driver 9.2.0.1.0
              Authentication and Encryption 9.2.0.1.0
              Oracle Wallet Manager 9.2.0.1.0
              Oracle Database User Interface 2.2.11.0.0
              Oracle SNMP Agent 9.2.0.1.0
              Oracle Provider for OLE DB 9.2.0.1.0
              Oracle Objects for OLE 9.2.0.4.4
              Oracle C++ Call Interface 9.2.0.1.0
              Oracle OLAP Cube Viewer 9.2.0.1.0
              Oracle OLAP CWM Lite 9.2.0.1.0
              Object Type Translator 9.2.0.1.0
              SQL*Plus 9.2.0.1.0
              Oracle Call Interface (OCI) 9.2.0.1.0
              SQL*Loader 9.2.0.1.0
              Secure Socket Layer 9.2.0.1.0
              Oracle Internet Directory Client 9.2.0.1.0
              Oracle Net Listener 9.2.0.1.0
              Advanced Replication 9.2.0.1.0
              Oracle Complete DSS Starter Database 9.2.0.1.0
              Oracle Complete OLTP Starter Database 9.2.0.1.0
              Oracle Starter Database 9.2.0.1.0
              Oracle Message Gateway Common Files 9.2.0.1.0
              Oracle Common Schema Demos 9.2.0.1.0
              Change Management Common Files 9.2.0.1.0
              Oracle UIX 2.0.20.0.0
              Oracle Help for the Web 1.0.7.0.0
              XML Class Generator for C++ 9.2.0.1.0
              XML Parser for C++ 9.2.0.1.0
              XML Parser for Oracle JVM 9.2.0.1.0
              XML Transx 9.2.0.1.0
              XML Transviewer Beans 9.2.0.1.0
              XML Class Generator for Java 9.2.0.1.0
              XSQL Servlet 9.2.0.1.0
              XML Parser for PL/SQL 9.2.0.1.0
              Oracle SQLJ 9.2.0.1.0
              Enterprise Manager Common Files 9.2.0.1.0
              Common Files For Generic Connectivity Using OLEDB 9.2.0.1.0
              Oracle SOAP Client 2.0.0.0.0a
              Oracle Workflow Manager 9.2.0.1.0
              Oracle Net Integration 9.2.0.1.0
              Oracle XML Runtime Components 9.2.0.1.0
              Enterprise Manager Database Applications 9.2.0.1.0
              Oracle SOAP Server 2.0.0.0.0a
              Oracle Database Demos 9.2.0.1.0
              Oracle Ultra Search Common Files 9.2.0.1.0
              Enterprise Manager Console 9.2.0.1.0
              Enterprise Manager Integrated Applications 9.2.0.1.0
              Enterprise Manager Client 9.2.0.1.0
              Database Workspace Manager 9.2.0.1.0
              Oracle interMedia Java Advanced Imaging 9.2.0.1.0
              Oracle interMedia Client Compatibility Files 9.2.0.1.0
              Oracle interMedia Java Media Framework Client 9.2.0.1.0
              Oracle interMedia Client Demos 9.2.0.1.0
              Oracle interMedia Web Client 9.2.0.1.0
              BC4J Runtime for Database 9.0.2.692.1
              Oracle Change Management Pack 9.2.0.1.0
              Oracle interMedia Annotator 9.2.0.1.0
              Data Management Services Common Files 9.2.0.1.0
              Oracle interMedia Common Files 9.2.0.1.0
              Oracle interMedia Image 9.2.0.1.0
              Oracle interMedia Audio 9.2.0.1.0
              Oracle interMedia Video 9.2.0.1.0
              Database Upgrade Assistant 9.2.0.1.0
              Oracle Intelligent Agent Config Tool 9.2.0.1.0
              Oracle Intelligent Agent 9.2.0.1.0
              PL/SQL Embedded Gateway 9.2.0.1.0
              Oracle HTTP Server Extensions 9.2.0.1.0
              Oracle eBusiness Management Extensions 9.2.0.1.0
              Oracle EMD Agent Extensions 9.2.0.1.0
              Oracle interMedia Client Option 9.2.0.1.0
              Oracle SOAP for JServ 2.0.0.0.0a
              MIcrosoft SQLServer(TM) Extensions 9.2.0.1.0
              Oracle Management Pack for Oracle Applications 9.2.0.1.0
              Oracle Windows Interfaces 9.2.0.1.0
              Export/Import 9.2.0.1.0
              Apache Configuration for Oracle XML Developer's Kit 9.2.0.1.0
              Oracle Tuning Pack 9.2.0.1.0
              Oracle Forms Extensions 9.2.0.1.0
              Oracle XML Developer's Kit 9.2.0.1.0
              Oracle Java Server Pages 1.1.3.1.0
              Oracle Diagnostics Pack 9.2.0.1.0
              Oracle Ultra Search Middle-Tier 9.2.0.1.0
              Oracle Dynamic Services Server 9.2.0.1.0
              Oracle Mod PL/SQL Gateway 3.0.9.8.3b
              Apache Configuration for Oracle Java Server Pages 1.1.2.3.0
              Oracle Text 9.2.0.1.0
              Generic Connectivity Common Files 9.2.0.1.0
              New Database ID 9.2.0.1.0
              Database SQL Scripts 9.2.0.1.0
              Generic Connectivity Using OLEDB - SQL 9.2.0.1.0
              Oracle HTTP Server 9.2.0.1.0
              XML 9.2.0.1.0
              Generic Connectivity Using OLEDB - FS 9.2.0.1.0
              iSQL*Plus 9.2.0.1.0
              Generic Connectivity Using ODBC 9.2.0.1.0
              Enterprise Manager Webserver Integration 9.2.0.1.0
              Reporting Framework 9.2.0.1.0
              Oracle interMedia Locator 9.2.0.1.0
              Oracle Management Server 9.2.0.1.0
              Oracle Ultra Search Server 9.2.0.1.0
              Oracle interMedia 9.2.0.1.0
              Oracle Trace 9.2.0.1.0
              Oracle9i Syndication Server 9.2.0.1.0
              Enterprise Manager Web Site 9.2.0.1.0
              Oracle Applications Extensions 9.2.0.1.0
              Oracle Intelligent Agent Extensions 9.2.0.1.0
              Oracle Programmer 9.2.0.1.0
              Migration Utility 9.2.0.1.0
              Oracle Enterprise Manager Products 9.2.0.1.0
              Oracle9i Development Kit 9.2.0.1.0
              Oracle Advanced Security 9.2.0.1.0
              Oracle JVM 9.2.0.1.0
              Database Verify Utility 9.2.0.1.0
              PL/SQL 9.2.0.1.0
              Oracle Database Utilities 9.2.0.1.0
              Oracle9i 9.2.0.1.0
              Oracle Net Services 9.2.0.1.0
              Oracle COM Automation Feature 9.2.0.1.0
              Oracle Data Mining 9.2.0.1.0
              Oracle OLAP 9.2.0.1.0
              Oracle Spatial 9.2.0.1.0
              Oracle Partitioning 9.2.0.1.0
              Enterprise Edition Options 9.2.0.1.0
              Oracle9i Database 9.2.0.1.0
    Starting to execute optional autolaunch configuration tools
    Launched configuration tool Oracle Net Configuration Assistant
    Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -Duser.dir=C:\oracle\ora92\network\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\network\jlib\NetCA.jar;C:\oracle\ora92\network\jlib\netcam.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\network\tools" oracle.net.ca.NetCA /orahome C:\oracle\ora92 /orahnam OraHome92 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp,tcps /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\oracle\ora92\network\install\netca_typ.rsp
    Configuration tool Oracle Net Configuration Assistant succeeded
    Result code for launching of configuration tool is 0
    Launched configuration tool Oracle Database Configuration Assistant
    Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -DORACLE_HOME="C:\oracle\ora92" -DJDBC_PROTOCOL="thin" -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\kodiak.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\lib\xmlparserv2.jar;C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\classes;C:\oracle\ora92\jlib\gss-1-1.zip;C:\oracle\ora92\jlib\oembase-9_2_0.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\assistants\jlib\assistantsCommon.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\oracle\ora92\assistants\dbca\jlib\dbca.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\lib\vbjorb.jar;C:\oracle\ora92\lib\vbjtools.jar;C:\oracle\ora92\lib\vbjapp.jar;" oracle.sysman.assistants.dbca.Dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -datafileJarLocation C:\oracle\ora92\assistants\dbca\templates -datafileDestination C:\oracle\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -passwordDialog true Protected value, not to be logged

  • Error in installing Database Control with Database Creation Assistant

    I'm trying to install the Database Control on Win2003 with the Database Creation Assistant. I get the following error. D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora (The system cannot find the path specified).
    Our init.ora file is not in that path and our file is named initECOMDB.ora. How do I tell DBCA the correct path and file name to use?
    By the way I'm a unix guy and this is the first time I've done Oracle on Windows. The database had been created by someone else and the files are sort of slung all over the place.
    Replies appreciated.
    Kirk

    Open initECOMDB.ora, it may be calling D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora which does not exist. Change it to the correct directory or remove it if all the required parameters are already in initECOMDB.ora. The line to look for is ifile
    BTW - if your database has already been created, you can create its database control from the command line:
    emca -config dbcontrol db -repos create

  • Database creation in oracle 9i

    can any one tell me step of database creation in oracle 9i
    i try many times from 2 days through script because my DBCA is not open
    when i click it. DBCA created orcl during instalation but now
    it is not running. will i have to install it ?
    1)i add db_name=mukesh below db_name=orcl and run script but errors
    2)i crete initm.ora by copy init.ora and change db_name=orcl by db_name=mukesh
    in initm.ora but errors
    1)when i use init.ora without adding db_name=mukesh
    i also change undo_management by AUTO to manual i get
    SQL> shutdown immediate;
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup pfile=D:\oracle\admin\orcl\pfile\init.ora nomount
    ORACLE instance started.
    Total System Global Area 135338868 bytes
    Fixed Size 453492 bytes
    Variable Size 109051904 bytes
    Database Buffers 25165824 bytes
    Redo Buffers 667648 bytes
    SQL> create database mukesh
    2 datafile 'D:\oracle\oradata\mukesh\system01.dbf' size 325m
    3 logfile
    4 group 1 ('D:\oracle\oradata\mukesh\redo01.log') size 100m,
    5 group 2 ('D:\oracle\oradata\mukesh\redo02.log') size 100m,
    6 group 3 ('D:\oracle\oradata\mukesh\redo03.log') size 100m;
    create database mukesh
    ERROR at line 1:
    ORA-01501: CREATE DATABASE failed
    ORA-01504: database name 'mukesh' does not match parameter db_name 'orcl'
    after that i add db_name=mukesh below db_name=orcl
    SQL> shutdown immediate;
    ORA-01507: database not mounted
    ORACLE instance shut down.
    SQL> startup pfile=D:\oracle\admin\orcl\pfile\init.ora nomount
    ORACLE instance started.
    Total System Global Area 135338868 bytes
    Fixed Size 453492 bytes
    Variable Size 109051904 bytes
    Database Buffers 25165824 bytes
    Redo Buffers 667648 bytes
    SQL> create database mukesh
    2 datafile 'D:\oracle\oradata\mukesh\system01.dbf' size 325m
    3 logfile
    4 group 1 ('D:\oracle\oradata\mukesh\redo01.log') size 100m,
    5 group 2 ('D:\oracle\oradata\mukesh\redo02.log') size 100m,
    6 group 3 ('D:\oracle\oradata\mukesh\redo03.log') size 100m;
    create database mukesh
    ERROR at line 1:
    ORA-01501: CREATE DATABASE failed
    ORA-00200: controlfile could not be created
    ORA-00202: controlfile: 'D:\oracle\oradata\orcl\CONTROL01.CTL'
    ORA-27038: skgfrcre: file exists
    OSD-04010: <create> option specified, file already exists

    Hi,
    If you getting a problem with DBCA go for manually process:-
    I had listed steps which I follow
    Step 1: Decide on Your Instance's System Identifier (SID)
    Step 2: Create the Initialization Parameter File
    Note:- Name the copied init.ora file init<SID>.ora because this is the default naming convention that the Oracle server looks for when it tries to start up the instance ORACLE_HOME/dbs directory (exists over the prefered path)
    Edit this file's parameters so that your database and your instance will run effectively on your system.
    DB_NAME Must be set to a text string of eight characters or less. During database creation, the value assigned to DB_NAME is recorded in the database's datafiles, redo log files, and control files. If, when you attempt to start the database instance, the value of DB_NAME as recorded in the initialization parameter file and the database name in the control files are not the same, the database will not start.
    DB_DOMAIN A text string that specifies the network domain where the database is created.
    CONTROL_FILES Is assigned the comma-separated list of control file names to use for the new database. When you execute the CREATE DATABASE statement, the control files listed as values assigned to this parameter are created. If you fail to specify a filename for the CONTROL_FILES parameter, Oracle creates a file with a default operating system dependant filename.
    DB_BLOCK_SIZE Specifies the standard block size of the database. This size is used in the creation of the system tablespace and by default in any other tablespaces created. Take care when determining what this value should be because after the database is created, the value cannot be changed.
    UNDO_MANAGEMENT Determines whether the database starts in automatic undo management mode. A value of AUTO enables automatic undo management; MANUAL enables manual undo management mode. In 9i, AUTO is suggested, but MANUAL is default.
    UNDO_TABLESPACE When the instance starts in automatic undo management mode, it needs to have a tablespace in which to store its undo information. The default is SYS_UNDOTBS and is automatically created if you execute a CREATE DATABASE statement with the UNDO_MANAGEMENT initialization parameter set to AUTO and no UNDO TABLESPACE statement in the CREATE DATABASE statement.
    Step 3: Connect to and Start the Instance
    Connect to the instance as SYSDBA either using operating system authentication or the password file method of authentication and start up the instance using the STARTUP command.
    sqlplus '/ as sysdba'
    If your parameter file is not in the default location or is not named init<SID>.ora, you may need to specify the PFILE clause in the STARTUP command for the instance to start.
    Because you do not yet have a database attached to the instance, you need to start up the instance in NOMOUNT state:
    startup nomount;
    The instance is now started and ready for the CREATE DATABASE command.
    Step 4: Issue the CREATE DATABASE Statement
    create database mydb1 controlfile reuse
    Logfile
    Group 1 ('/mydb1/log1/log01a.log',
    '/mydb2/mydb1/log01b.log') size 50M,
    Group 2 ('/mydb1/log1/log02a.log',
    '/mydb2/log1/log02b.log') size 50M,
    Group 3 ('/mydb1/log1/log03a.log',
    '/mydb2/mydb1/log03b.log') size 50M
    Datafile '/mydb1/mydb1_system.dbf' 250M
    AUTOEXTEND ON MAXSIZE 500M
    Undo tablespace mydb1_undo1
    Datafile '/mydb/mydb1/mydb1_undo1.dbf' 50M
    Default temporary tablespace mydb1temp tempfile
    '/mydb/mydb1/mydb1temp1.dbf' size 75M
    Extent management local
    Character set US7ASCII
    MAXLOGFILES 10
    MAXLOGMEMBERS 10
    MAXLOGHISTORY 1
    MAXDATAFILES 500;
    Thanks
    Pavan Kumar N

  • Database creation in oracle 8.0.4

    Hi,
    I'm creating a database in Oracle 8.0.4. I choose the custom option to give all the parameters. One of these parameters is the password of internal user. I give it as oracle. After giving all the other parameters and then click on finish to create the database, i get ORA-01017 error and i'm being forced to abort the database creation.
    After this error has occured, i've created another two databases with a different names and all went fine. I didnt have any problems while creating the databases. Again after the creation of the new databases, i tried to create the old database. Even then i got the same error.
    can anyone let me know what might be the reason for this and the solution to overcome this problem.
    Thanks in advance,
    Jaikanth V Garlapati.

    Found this in Oracle Doc,
    NLS_DATABASE_PARAMETERS is the one you set when you do Create Database.
    NLS_INSTANCE_PARAMETERS is the one you set in your spfile when you start instance.
    So if you didn't set NLS_INSTANCE_PARAMETERS in spfile, then instance will start with NLS_DATABASE_PARAMETERS
    And alter session will over write them all.
    It's not new behavior in 10.2.0.4
    ==============================================
    NLS Database Parameters
    When a new database is created during the execution of the CREATE DATABASE statement, the NLS-related database configuration is established. The current NLS instance parameters are stored in the data dictionary along with the database and national character sets. The NLS instance parameters are read from the initialization parameter file at instance startup.
    You can find the values for NLS parameters by using:
    NLS Data Dictionary Views
    NLS Dynamic Performance Views
    OCINlsGetInfo() Function
    NLS Data Dictionary Views
    Applications can check the session, instance, and database NLS parameters by querying the following data dictionary views:
    NLS_SESSION_PARAMETERS shows the NLS parameters and their values for the session that is querying the view. It does not show information about the character set.
    NLS_INSTANCE_PARAMETERS shows the current NLS instance parameters that have been explicitly set and the values of the NLS instance parameters.
    NLS_DATABASE_PARAMETERS shows the values of the NLS parameters for the database. The values are stored in the database.

Maybe you are looking for