Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Similar Messages

Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Database creation problems

Help!! I have installed 8i on RH Linux 6.1 and followed the "Friendly" guide steps, it worked perfectly. However when I try to create a database using the Database assistant, I get an error "Oracle Not Logged on" I've reinstalled twice and still have the same problems - can anyone help?
Thanks for any suggestions/help!
null

This problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts.

User profile creation problem for windows 7 clients with eap-fast

Hi All,
In our clients locations we implemented eap-fast authentication with domain integration in ACS for wlan users.Every thing working fine.We are facing problem with windows 7 laptops, in which client utility is not available to configure the user profiles.
In xp laptops client utility softwares are available with all makes, but with win 7 utilitys are not coming by default......
So what are options and available sourses for creating user profile with EAP-FAST in windows 7 laptops.
Any free univarsal client utility is available for windows 7 laptop.
Please guide me..............
-Subhash

Windows 7 should be able to do EAP-fast by default. If not you could download the latest Anyconnect client that also has the Cisco wireless supplicant in it.
HTH,
Steve
Sent from Cisco Technical Support iPad App

LiveCache Installation (Database creation) problems

We are trying to install liveCache 7.6.29 (SCM 5.0 SR2), during the database creation phase we are encountering the below error;
Execute Command : /sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Start subprocess as user with uid: root
> Subprocess stops at 20070522205211
ERR
-24875,ERR_NEEDADMI: The operating system user is not a member of the database administrators group
-24994,ERR_RTE: Runtime environment error
20145,UNIX password ********
Please let me know if any of you have faced this issue and resolved the same.
Eagerly waiting for your reply, as this is a high priority for me.
Regards,
Thilaka

Hi Thilaka,
hm, why are you now askig the forum when you've direct email contact with me?
Anyway, this really should be handled over OSS...
Just fyi:
It seems that SAPINST is trying to issue the following command:
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Can you try and see if you can issue it from the commandline on your machine (with the same user, i.e. probably root)? Please do not forget to add the password of the ql1adm, which is either not visible in the above command or forgotten (by SAPINST):
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,<b><password></b>
After issueing this, please try to continue using SAPINST (and please update the OSS message accordingly).
Regards,
Roland

Manual database creation on 9i; Windows 2000, SP 2

Hi, I am unable to generate database using generated sripts by Database Configuration Assistant. I also tried to modify them to be similar to those generated in version Oracle 8.0.5. The main problem is I cannot connect through SQLPLUS utility using usename SYS with CHANGE_ON_INSTALL password. I miss user INTERNAL :-). Please, help.
Thanks, Trsik.

Hi, thank you for suggestions. The problem was I didn't have a pwd<SID>.ora file and I had to change REMOTE_LOGIN_PASSWORDFILE to SHARED value in init<SID> file. Then there was no problem with DB creation.
Trsik

DATABASE CREATION PROBLEM

I followed the oracle press dba 8 book 2.
I create the password file with password a.
I also create the database with instance u16.
When i start with my database using svrmgrl
the said password does not work.
what may be the possible reason.
null

yes u are right, i check my initu16.ora
and it is shared, i will change it
then i will be able to send the right
reply.
but very very thnaks for so quick reply.
if u don't mind if u will tell me in which
category i will place my dba problems questions because the list is so completed that
oracle 8i value is not available
null

BAM database creation problem in Enterprise Server

Hi,
We are trying to create a new database and config BAM inside the Enterprise Server. We have already created the engine db and the directory service db but we did not start the BAM or create any db or configure anything for BAM inside the Enterprise Server.
Now when we create a new external resource to create a new db for BAM and then goto Process Monitoring ---> Manage Database
and then create a new database and a new data structure and enter the Database Administrator User and the Database Administrator Password, it gives us an error:-
Username and password already exists and it could not be created..
We have tried all usernames and passwords but could not create the BAM..
We also used the system user and the password..
What could be the possible problem? Do we have to create the BAM db while configuring the engine db and directory service db or can we start and configure BAM later?
How do we resolve this problem?
The documents do not specify what is the
Database Administrator Password
and
Database Administrator User is?
What are these?
Anybody knows?

Hi,
Lilach's tip should get you going.
Suspect you won't need it, but here's a link to a BAM installation document I wrote that might also help you with your Oracle BPM 10g installation - http://www.4shared.com/file/136283546/ca086174/ALBPM_60_-Configuringthe_BAM_Updater.html. It's an update of the excellent ALBPM 5.7 BAM installation document that Gustavo in Customer Support wrote a few years ago. Although it was written for ALBPM 6.0, the steps will work with Oracle BPM 10g.
Here's another thread on this forum regarding BAM installation - Re: Problems with the albpmwarehouse service
Hope this helps,
Dan

New database creation problem

While we are trying to create new database in test server it getting below error.
Error:

Hello,
There may be session accessing the model database, and that prevents the creation of the new database. This is by design; an exclusive lock is required on model database by SQL Server, since it needs to create the new database from a copy of the model database.
Run the sp_who2 to know which session has opening the model database.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

File datastore creation problem from window installed ODI in AIX server

HI all,
My question is how to represent file folder name of that server
my file folder in AIX server and i want to access that file in window s machine.
* is this the right way to represent the data folder in physical schema declaration
file:///<aix server IP>/usr/oracledi/oracldi/data

HI Julien,
It's really working ..........
Thanx a lot
For other people it will be helpfull info
Only change that I have made for that task are
1. I have created an new agent for that AIX machine
2. I have updated the ODIPARAM.bat
3. I have changed record separator as UNIX while creating data store for that file
4. While executing particular interface ,I have used the agent which is local to AIX machine ..................
Steps for execution:
At the time of designing you must have local copy of that file so that you can perform your mapping once it's executing well wid your local or no agent .
then come to the Topology manager change the location for that folder in physical schema declaration of that file server of AIX machine.
Now execute the same wid ur AIX agent u have created earlier..............
while U have changed the data store location from local directory to other AIX directory don't try to reverse the same otherwise u'll get "Execution query failed "or file not found kinda error as because odi system system searching local systems file.................
Julien can u provide me ur mail Id so that I can contact U for further assistance ofcourse
if u want................
regards
palash

Standby Database Creation problem

Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616

Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Problem during Database Creation of 8.1.7 in Linux7.2

hello folks,
i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
after successful installation,,and after even successfull listener configuration,,
when database creation assistant is creating database; On 82%
At "Initializing database"
it comes::
ORA-03114: not connected to ORACLE
and if we keep on ignoring it ,then it comes:
end of file communication channel.
plz help me what i would do,,
regards.

Hi,
seems that your oracle database went down. just check if oracle is running or not by using ps command.
if its not running go to $ prompt and start the database either using sys or internal user i.e
$svrmgrl
connect internal
$startup or startup force
let me know the result.
Yogi
[email protected]

Database Connection Problem via a Windows Form

I am having a problem getting a database connection using a windows form. The strange thing is I can use the same connection string in the sister web application and the database connection works perfectly fine.
I am using:
.NET 1.1
ODP.NET 9.2.0.700
Oracle 9i PatchSet 11
Here is an example of the connection string:
_oraConnStringMain = "Data Source=mydb;User Id=myid;Password=mypass"
The error is: "ORA-12154: TNS:could not resolve service name" and remember the same connection string and implementation is the web application works fine.
Offending code:
          public bool ValidateOracleConnection(string connectionString)
               bool _success = false;
               OracleConnection oraConn = new OracleConnection(connectionString);
               try
                    oraConn.Open();
                    _success = true;
               catch (Exception ex)
                    MessageBox.Show(ex.Message.ToString(), "MYAPP", MessageBoxButtons.OK,
                         MessageBoxIcon.Information);
                    _success = false;
               return _success;
Any ideas?

Hi Steven,
My only WAG is that a different sqlnet.ora or tnsnames.ora might be used for the two different apps. Search your machine for both files. Are they only in the OH\network\admin directory?
You may want to run a client side sqlnet trace of both apps, and compare them. It should tell you what tnsnames.ora file it's using, and may give a clue as to why the difference.
Hope that helps,
Greg

Database creation problem on Windows XP

Similar Messages

Maybe you are looking for