Database customization requirement
I have doubt that, though Oracle allows for customization, can we create customized table, Views, Procedures etc in the Oracle EBS Database so that our legacy systems can work seamlessly along with Oracle EBS ?
Hi;
I have doubt that, though Oracle allows for customization, can we create customized table, Views, Procedures etc in the Oracle EBS Database so that our legacy systems can work seamlessly along with Oracle EBS ?Yes we are,generaly custom development keep under XXname at database side as schema and also forms etc keep under XXTOP for applications
Please also see:
customizations and personalizations r11 to r12
Re: How to identify the OAF customizations and personalizations
Custom_top
Re: Custom top
Regard
Helios
Similar Messages
-
Database is required for grid?
Hi
I m planning to install the grid control on Linux box , but that box no database .
My question is for grid control database is required ?
If YES then which version downlod for linux (database and grid) ?
My Linux version is
Linux sos02.sias.corp 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux819136 wrote:
Hi
I m planning to install the grid control on Linux box , but that box no database .
My question is for grid control database is required ?
If YES then which version downlod for linux (database and grid) ?
My Linux version is
Linux sos02.sias.corp 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/LinuxPlease do not duplicate post
Grid control required database? -
What version of Database is required to using JHeadstart?
What version of Database is required to using JHeadstart?
Question
========
1) Do you have to upgrade Forms 4.5 character mode to Forms 6i and then Forms 9i before migrating to Java, or can the migration be done directly from either Forms 4.5 or 6i ?
Jheadstart (JDG) only uses the designer repository as input and not forms. So if you have forms generated out of the designer repository, you can use the designer forms modules as jheadstart input. If you don't, you have to reverse engineer (capture) your forms into designer first.
2) What version of Designer is also required ?
You need designer 6i patch 4.2, see also http://otn.oracle.com/consulting/9iServices/install.html#compatibility
Gerrit -
WEB Server And Database Space requirements for deploying Web Application
Hi,
We are in requirement of WEB Server And Database Space requirements for deploying our Web Application in cloud server. We want to know technical requirements and feasibilities laid by Microsoft team for deploying web
application.......
Regards,
Sreenivasa M SHi,
Please refer this link and check if it helps:
http://blogs.technet.com/b/cbernier/archive/2013/09/24/deploy-your-web-application-to-windows-azure-from-with-visual-studio.aspx
Regards,
Azam Khan -
Database componentes required/excluded for RMAN and Grid control repository
I'm planning creation of a centralized 10gR2 RMAN repository for my production/dev environment, and needed a basic, barebones database. We may also use that same database as a repository for 10g OEM Grid Control in the future, so I wanted to ensure I was prepared for that.
None of the documentation says anything about particular required components for RMAN, only that a database is needed. So am I allowed to deselect all items from the following DBCA list? I didn't expect any problems with the optional components, but wanted to make sure that RMAN or Grid control would function, were I to disable Oracle JVM or XML DB. My standard loadout (for better or worse) is to include everything in my production/dev databases, and I didn't want that to be the case with this one.
Database Components:
Oracle Data Mining
Oracle Text
Oracle OLAP
Oracle Spatial
Enterprise Manager Repository
Standard Database Components:
Oracle JVM
Oracle XML DB
Oracle IntermediaThanks. For that matter, do DBA's in the general population install those standard oracle components? I have them there in my default installs just because of the message 'Oracle recommends you have these installed.' in the DBCA screen.
-
Which databases are required to be moved in MOSS 2007 for upgrade to 2010?
Hi,
We are planning to upgrade MOSS 2007 environment to SharePoint 2010. As a next step, I have to move the following databases. Please correct me if we need to also move the Shared Services (SSP) content databases.
Content Databases of Main website (move required)
Content Databases of SSP (move required)
Content Databases of Central Admin. (move not required)
Thanks in advance!
LMContent Database, this is most important stuff.
if you have mysite and User profiles then you need to move the SSP to 2010. check the below blog for steps and understanding:
http://blogs.msdn.com/b/alimaz/archive/2009/11/08/upgrading-moss-2007-ssp-user-profiles-and-mysite-content-to-sharepoint-server-2010-using-db-attach-method.aspx
Yes you dont need the Central admin.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Database Size Required for SOA
I will be installing SOA Suite with OSB in Exalogic for testing. It is not for the production environment and very simple application will be used for testing. Database admin asked me what size database would be required but I did not find clear answer in the documentation anywhere. I would appreciate if some one could provide the answer.
Thanks
P.S: Oracle Database 11.2 will most likely be the preferred choice for the database.Try and have a separate machine for the SOA Suite, e.g. server. Then use the developer machines for JDev.
It really comes down to what load you are going to put on your environment. I would recommend 4GB but I have run it fine with just 2GB. The issue of having JDev on the same machine is that JDev can very very memory hungry and can / will impact the developer experience.
cheers
James -
Is Oracle database companion required for OIM?
Hello,
We have inherited a system with the database companion installed and now we need to build a new OIM environment, do we need to install it prior to OIM installation?
ThanksMoazzam - Posted: Jan 13, 2011 3:22 AM tart the OC4J instance
On machine2, open the browser and enter the following URL:
http://machine-name:port/forms/frmservlet?config=test
>
This suggestion assumes you have the Oracle Developer Suite installed on Machine 2 and requires you to distribute your Forms files to Machine 2 or share them on a common network drive. This is not a good solution!
Oracle Forms 10g only supports "Web Deployment" runtime. As InoL indicated, this means you must have an application server (AS) to "serve" the application to a web client. The best AS to use is the Oracle Application Server (OAS) 10g as it provides the easiest integration with Oracle Forms Services (the component that handles the translation of the Forms compiled binary to Java).
@HamidHelal, you must have a dedicated application server running the OAS. Ideally, it is recommended that you have a 3 tiered solution. Tier 1: Database Server, Tier 2: Application Server, Tier 3: Client. Depending on your needs, Tier 1 and 2 can be hosted on the same physical server.
For more information on setting up an OAS with Forms Services, I recommend you review the Forms Services Deployment Guide in the Oracle Forms 10g Documentation section.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Minimun database version required for oracle application 12.1.3
We are palnning to upgrade from our current applications version 12.0.4 to 12.1.3
We understand it will done in 2 phases ie 12.0.4 - 12.1.1 and 12.1.1 to 12.1.3
but our current database version is 10.2.0.4
My question here is can we upgrade applications to 12.1.3 without upgrading database?
or shall we upgarde atleast to 10.2.0.5 first and then proceed with applications upgrade and then plan for database upgrade to 11g release 2 later.
Please suggest me with proper approach.To upgrade my current environment with oracle application 12.0.4 with database 10.2.0.4 to oracle apllications 12.1.3
Thanks in advance
pavanWe infact are upgrading even our database to 11.2.0.3, but database upgrade will be done by other organisation as our client has outsoursed database support to other organisation.
We have to do only application upgrade from 12.0.4 to 12.1.3, however we have access to database to upgrade it to 10.2.0.5 if required, So my question here is can we proceed upgrading application to 12.1.3 without upgrading the database. (can i use 10.2.0.4 database with 12.1.3)Please see your other thread, I have already answered you.
Thanks,
Hussein -
What further customization required for WORKFLOWS ?
Hello,
I build a workflow and i want to run it when a certain event occurs in the system. But it is not running, the event trace is showing an error, so are there any further customization / linking required to be performed so that the workflow can run when the even occurs in the system ?
Points are awarded
regardsHi Hassan,
you could use transaction SWU3 to check if your customizing is on the right way,
if you haven't done yet.
Hope this helps.
Regards
Bernd
For further checks call SWUD.
Message was edited by:
Bernd Köhn -
Is a database table required for temporary interfaces with flat file data set source ?
Folks, this is the situation I have in ODI 11.1.1.7
I have a temporary interface (yellow), called MJ_TEMP_INT, that pulls data from TWO data sets in the source into a temporary target (TEMP_TARG). The catch is one data set pulls from a from a table whereas the other data set pulls from a flat file. A union is done on the data sets.
I then create another interface, called MJ_INT, that uses the MJ_TEMP_INT as a source and the target is a real db. table called "REAL_TARGET"
Two questions:
When I execute my second interface (MJ_INT), I get a message "ORA-00942: table or view does not exist" because it is looking for a real db table TEMP_TARG. Why must I have one ? because I am pulling from a flat file ?
On my second interface (MJ_INT) when I look at the property sheet of my source interface MJ_TEMP_INT (yellow), the checkbox next to "Use temporary interface as Derived table" is DISABLED. Why ? Is is also because my temporary interface is pulling from a flat file ?
I have attached a file that shows a screen shot of my ODI studio.
By the way, IF my temporary interface source has only one data set pulling from a db. table into a temporary target table, say called MJ_TEMP2_TARG, and then when I use this temporary interface as a source to another other real db. target table (REAL2_TARGET), THEN, every thing works. ODI does not require me to have a real db. table MJ_TEMP2_TARG and the checkbox for "Use temporary interface as Derived table" is NOT DISABLED and my REAL2_TARGET table gets populated.
Thank you in advance.
M. Jamal.Thanks SH. I thought so.
Though I understand the reason to materialize the file in a staging area, but that almost defeats the purpose of having a temporary interface in this case if we have to save the data in a permanent db. table first. I assume the db. table sticks around and is not automatically dropped once the interface executing ends. If the db. table sticks around then I also must truncate it first before executing the temporary interface each time. Right ? -
PI sheet for pharma industry - step by step customization required very urg
Hi,
We are implementing sap PP-PI for pharma industry.Can some one please send some good document explaining the customization for PI sheet , custom pi sheet .
any help is gretaly appreciated.
soniaHi,
Please check with following Baseline Buliding Block link provided by SAP. Here u can select industry type and contry type.
<b>http://help.sap.com/bp_blv1470/BL_UK/index.htm</b>
i hope this will help.
regards
pardeep -
FRM-10060: Database connection required for retrieveing referenced objects
Hi,
When I open a form, I get this error. This form is referencing a form stored in the database for some item properties. How do I get find out which item is being referenced from the database?. This is quite a big form with lots of blocks & canvases.
Thanksafter pressing OK connect to the database.
I think, Check for the pre-form trigger code.
The objects used in the pre-form trigger might be referenced by the database. -
We have a new datasource that I need to write a report against. In order to access the db, I have to install an Oracle wallet on my pc that contains a certificate. I then have an entry in the sqlnet.ora file that references this wallet, and I have an entry in my tnsnames file. I wrote a report successfully on my pc. We then have our Business Objects installation on a Sun Solaris machine with Unix. We installed the wallet, added the sqlnet.ora entry, and the tnsnames.ora entry. I am able to connect to the db from the unix command prompt by typing sqlplus username@dbname successfully. However, when I place my Crystal Report in Bus. Obj. I cannot get it to work. I go to the CMC, select the report, choose Process, Database. I am entering Use custom database logon info and choosing Oracle as my database driver. I then enter the tnsnames entry into the server and enter my username and password and check the use use same database logon as when report is run. I get the error The database logon information for this report is either incomplete or incorrect. I'm guessing the report is not using the certificate in the wallet when it is trying to log on, but I'm not sure. Does anyone have any suggestions or experience with this? Thanks in advance for any help.
Hi Angie,
you should install the 32bit Oracle driver on your Solaris machine and adjust the LD_LIBRARY_PATH environment variable (in the profile of the BOBJ installation user) to point to the path of the 32bit libraries of your Oracle driver.
BOBJ is not a native 64bit software and can therefore work only with the 32bit versions of the database drivers.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Jul 15, 2009 4:49 PM -
Export and Import of Portal Database - Help Required
Hi,
We have a NW04 production portal running on AIX clustered environment (HACMP). We are building another landscape for which i need to export the current portal and import onto new portal which is already clustered (HACMP). Can someone point document to use sapinst (Jload) for export and import for this high availability systems.
Thanks
Murali.Hi ,
Check with below pdfs.
check whther they are helpful or not
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/303af93a-0811-2a10-0687-f3514f0103c8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/508e36c5-5914-2b10-a795-d25997cf3270
EP6 system copy
Koti Reddy
Maybe you are looking for
-
Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstal
-
Ask the Expert: Cisco TelePresence for the Enterprise
Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Telepresence® for the enterprise. Cisco experts Jaret, Fernando, and Fred will be covering all Cisco TelePresence pro
-
IWork Page Hyperlink Not Working In Email & PDF
I use Pages as a template for my standard email reply with many hyperlink contents. I found hyperlink link is missing when i copy the content from Pages to my gmail when i was working on replying an email. How can i keep the hyperlink active during t
-
Best WMA to MP3 batch converter for MacBook Pro
Half of the music that I've collected over the years, and now transferred onto my new MacBook Pro, is in the WMA format. I am looking for a program that can batch convert ALL of these files to MP3, putting the MP3s in the same folders as the WMA file
-
Problem with REGEXP_SUBSTR and the desired results
I have table like below: USERNAME DOCNAME DESCRIPTION user1 doc1 yes|no|none user1 doc2 ok|not user1 doc3 allryt Now I want to display the table like below: USERNAME DOCNAME DESCRIPTION user1 doc1 yes user1 doc1 no user1 doc1 none user1 doc2 ok user1