Database Diff not working using 3.1 - 64 bit

Hi there,
I have just tried using the utility Database Diff in 3.1 on windows 64-bit and this does not produce any differences between 2 similar schemas. I have just downloaded 3.1 32-bit (Java included) and this works fine. I am running Windows 7 64bit.
Any ideas?
Regards,
VicC

I have managed to sort this out, I was trying to speed up the startup of SQL Developer and disabled some of the extensions. The crucial one here is Versioning support. This must be enabled for Database Diff to work.
Regards,
VicC

Similar Messages

30EA1--Database Diff not working even after changing Tools Preferences

Trying to use Database Diff but even after changing Tools > Preferences > Database > Licensing, I still get the error message saying I have to make changes to the Licensing check box. Anyone have a workaround or experience the same problem?

When you connect to any database error disappears, but still it's a bug.

After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

Hi,
I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
I followed the upgradation path as recomended.
Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
Can anybody pls guide me if anything else to do after the upgradation.
Thanks & Regards
Sachi

Hi Javier,
First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
Do we need to do anything in the AD itself?
Regards
Sachi
Steps for ACS upgrade to 4.2 version
Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
        1)     Take a configuration backup from existing ACS. ACS--->System
configuration----> ACS Backup
2)    now if you have ACS 3.3.2 on server. take backup of the ACS
3)   Insert the cd or if you have the set up on the system then Run the setup of ACS 3.3.4. During the process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
4)     Once you are at 3.3.4, take a backup and keep it handy.
5)     Run the setup of 4.1.1. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
6)Once you are at 4.1.1.24 take a backup and keep it handy.
7)     Run the setup of 4.2. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
8)     Once you are at 4.2 take a backup and keep it handy. Now run the
patch 12 and take a backup again.
9)     Now fresh install 4.2 on your new production server and install patch
12. Restore the 4.2 patch 12 backup and you should be all set.

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

Oracle 10g database homepage not working?

Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck

XML Query works on one database and not working on others with errLPX-00241

I have one query as below
SELECT EXTRACTVALUE
(VALUE (xml_node),
'/inspectionActivityArtifact/ns2:landfillTypes/ns2:type[position()=1]',
'xmlns:ns2="http://dwm.sw.xmlNamespace/InspectionActivity"'
) AS TEST
FROM artifacts a,TABLE (XMLSEQUENCE ((XMLTYPE (NVL (artifact_data, '<empty></empty>'))))) xml_node
this works well on other databases but not working on one database. Everything is same configuration and OS and everything.
I can work on other XML parsing which is working fine but not this query.
Any idea ?
Viral Dave

post versions and patch levels for both databases eg 10.2.0.1.0 and the error message you are getting.

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Database is not started using spfile

Dear Friends ,
I got a strange problem . My databasae is not started using spfile default .
Sequences are as stated below :
1) SQL> startup pfile='/orafs/admin/MISLTEST/pfile/init.ora.082008214648';
ORACLE instance started.
Total System Global Area 1207959552 bytes
Fixed Size 2020456 bytes
Variable Size 318770072 bytes
Database Buffers 872415232 bytes
Redo Buffers 14753792 bytes
Database mounted.
Database opened.
2) SQL> SELECT COUNT(*) FROM v$spparameter WHERE value IS NOT NULL;
COUNT(*)
0
That means , it is running using 'pfile' parameter
3) Now I create spfile following way :
SQL> create spfile='/orafs/app/oracle/10.2.0/db_1/dbs/spfileMISLTEST.ora' from pfile='/orafs/admin/MISLTEST/pfile/init.ora.082008214648';
4)
Now I just shutdown and open the database , Like :
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 1207959552 bytes
Fixed Size 2020456 bytes
Variable Size 318770072 bytes
Database Buffers 872415232 bytes
Redo Buffers 14753792 bytes
Database mounted.
Database opened.
Now the problem is :
It is not strated using the spfile , And when I run the following command then it shows the database runs with the help of 'pfile' .
SQL> SELECT COUNT(*) FROM v$spparameter WHERE value IS NOT NULL;
COUNT(*)
0
Now I dont understand why the database is not running use the 'spfile' ? Can anybody plz help me regarding this issue ....

Hi,
In the platform-specific default location, Oracle locates your initialization parameter
file by examining filenames in the following order:
1. spfile$ORACLE_SID.ora
2. spfile.ora
3. init$ORACLE_SID.ora
You can direct Oracle to read initialization parameters from a traditional text
initialization parameter file, by using the PFILE clause of the STARTUP command.
For example:
STARTUP PFILE = /u01/oracle/dbs/init.ora
Further, you can use this PFILE clause to start an instance with a nondefault server
parameter file as follows:
1. Create a one line text initialization parameter file that contains only the SPFILE
parameter. The value of the parameter is the nondefault server parameter file
location.
For example, create a text initialization parameter file
/u01/oracle/dbs/spf_init.ora that contains only the following
parameter:
SPFILE = /u01/oracle/dbs/test_spfile.ora
2. Start up the instance pointing to this initialization parameter file.
STARTUP PFILE = /u01/oracle/dbs/spf_init.ora
Regards,
Kumar
[www.idatamax.com]

How to check if a database was not being used since past 90 days ?

Team ,
Thanks for your help in advance !
I'm looking out for some pointers to determine if a database was NOT BEING Used since last 90 days so that we can decommission them .
Rajkumar Yelugu

My personal method which I apply after mailing to all users and managers and after using methods fellow answeres have given
Take database offline or in a single user mode and keep it like that for 15-20 days if someone is using it they would surely ping you or mail you. Please mail to all repective persons and app owners before taking it offline. As you said you want to decommission
it so i assume server will be less utilized itself.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

HP Laserjet P1006 is not working on Windows 7 (64-bit).

I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing. It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?
Thanks for helping!

Hi @achieverone ,
I can help you with finding the drivers for the Laserjet P1006.
Just to clarify, you were able to install the printer software, but it just isn't printing correct?
Here are the two drivers available for Windows 7 64 bit.
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid five times quickly. It should print off a page with black lines on it.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

hi guys,
My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
My OS is windows 7
RAM - 8gb
HDD - 1 TB

are you getting any errors?
and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

Why are some of my keys not working when I put a bit of pressure on it?

Hi there, since 4 months ago I've noticed that my a, q, 1, backspace, and volume buttons do not work when theres a little bit of pressure on or under it. It kind of bothers me because I cant lay in bed and do my things, I have to put it on a table. So my question is, why is this and how can I fix this?
5 or more weeks ago, I can't remember, my keys did suddenly work when there was a bit of pressure on / under it, but I don't know how..
I'm running OS X Mavericks 10.9.4
Processor: 1.3 GHz Intel Core i5
Memore: 4 GB 1600 MHz DDR3

What is your operating system? Reader version? How do you convert to PDF?
You write that "some" of the links don't open; what's the difference with links that do open?

Sessions.xml data source not working using toplink

I'm having some difficulty getting a data source to work. I have an ADF selectOneChoice component and I want the list of values available to be bound to a database given by the JNDI name and controlled at the j2ee container level.
I have created a sessions.xml file
<toplink-configuration>
<session>
<name>PIMSSession</name>
<project-xml>META-INF/PIMS_ADF_TLMap.xml</project-xml>
<session-type>
<server-session/>
</session-type>
<login>
<datasource>jdbc/PIMSDS</datasource>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
<connection-pool>
<is-read-connection-pool>true</is-read-connection-pool>
<name>default</name>
<login>
<datasource>jdbc/PIMSDS</datasource>
<platform-class>Oracle10g</platform-class>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
</connection-pool>
</session>
</toplink-configuration>
The sessions.xml points to the toplink mapping file PIMS_ADF_TLMap.xml, which contains information about the database view that is used to populate the drop down list. It also contains a deployment connection:
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class>
<toplink:user-name>pimsdev</toplink:user-name>
<toplink:password>BB742416276274A494F7008B3AE0FB10</toplink:password>
<toplink:driver-class>oracle.jdbc.OracleDriver</toplink:driver-class>
<toplink:connection-url>jdbc:oracle:thin:@yvworad01:1521:PIMSD</toplink:connection-url>
</toplink:login>
The problem I'm having is that my ADF application always binds the selectOneChoice to the connection-url in the toplink mapping file instead of the datasource in the sessions.xml.
If I remove the deployment connection from the mwp file, recompile and deploy I get a JBO-29000 error about not having a suitable driver.
Does anyone know how to get the selectOneChoice to bind to a datasource instead of the toplink mapping connection-url?

Hi Aaakar,
From the error message, please try to change the setting of Credential type for the data source on report manager as follows:
Go to the Data Sources properties page.
For the Connect Using option, select Credentials stored securely in the report server.
In User Name and Password, type credentials that can be used to access the database. If you are using SQL Server as the data source, the user name must be valid for both logging on to the server and for accessing the database that contains the data for
the report.
If the user name and password are credentials for a Windows account, select Use as Windows Credentials.
If you want the report server to pass the credentials of the user accessing the report to the server hosting the external data source, click Windows Integrated Security. In this case, the user is not prompted to type a user name or password.
For more details about Configure Data Source Properties, please see:
http://technet.microsoft.com/en-us/library/ms155882.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Database Diff not working using 3.1 - 64 bit

Similar Messages

Maybe you are looking for