Database does not exist, but visible in EAS console

Dear Sir/Madam,
We had a problem with a corrupted security file. We have replaced the corrupted essbase.sec with an older version. Now it all works again, but when I open the tree in EAS console, I can see two databases which didn't exist before the corrupted file.
When I try to open the 'ghost' database, EAS displays the following message:
Error: 1013015: Unable to Connect to Database [WM_MFIN2]
On the server there isn't a folder named WM_MFIN2. I have tried to delete it in EAS, but than it states:
Error: 1053005: Database directory does not exist: WM_MFIN2
How can I delete this fake database?
Thanks in advance for the help!
Regards,
Chris Pennings

On the server copy an existing stopped database and name it to be the ghost db, then you should be able to delete it from EAS. (choose a small db to copy)

Similar Messages

Error:domain database does not exist

Hi we are running Iplanet mssaging Server 5.2 p1 running in dirsync mode and iplanet directory server 5.1.We have configured th ldap settings of some of the users using the maildeliveryoption to mailbox and forward & we have set the mailforwarding attribute to forward the mail to a set of users.Now yesterday our smtp server panic & service stopped working.After removing the lock files in ../imta/tmp/ directory the service started working.But now for all the users for whom this forwarding of mails has been sent are getting there mails bounced.for other users for whom this option is not there the mail is getting delivered.The error recived is Illegal host / domain name.
I ran imsimta test -rewrite -debug for a user whose mail is getting bounced and i get the following output.here attaching some of the lines Can anyone please guide me as to what the problem is?(nslookup is working).
Does the imsimta cleandb might have corrupted the entries?
Regards and thanks in advance
Script started on Tue Nov 30 16:45:02 2004
# imsimta test -rewrite -debug
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
Address: [email protected]
*** Debug output from initializing MM for submission:
16:45:17.33: mmc_winit('l','[email protected]','[email protected]') called.
16:45:17.33: Queue area size 9236824, temp area size 3202696
16:45:17.33: 2309206 blocks of effective free queue space available; setting disk limit accordingly.
16:45:17.33: 1601348 blocks of free temporary space available; setting disk limit accordingly.
16:45:17.33: Rewriting: Mbox = "postmaster", host = "mail1.hathway.com", domain = "$*", literal = "", tag = ""
16:45:17.33: Rewrite: "$*", position 0, hash table -
16:45:17.33: Failed.
16:45:17.33: Rewrite: "$*", position 0, rewrite database -
16:45:17.33: (domain database does not exist)
16:45:17.33: Failed
16:45:17.33: Rewriting: Mbox = "postmaster", host = "mail1", domain = "mail1.hathway.com", literal = "", tag = ""
16:45:17.33: Rewrite: "mail1.hathway.com", position 0, hash table -
16:45:17.33: Found: "$U%[email protected]"
16:45:17.33: New mailbox: "postmaster".
16:45:17.33: New host: "mail1.hathway.com".
16:45:17.33: New route: "mail1.hathway.com".
16:45:17.34: New channel system: "mail1.hathway.com".
16:45:17.34: Looking up host "mail1.hathway.com".
16:45:17.34: - found on channel l
16:45:17.34: Routelocal flag set; scanning for % and !
16:45:17.34: Rewriting: Mbox = "postmaster", host = "mail1.hathway.com", domain = "$*", literal = "", tag = ""
16:45:17.34: Rewrite: "$*", position 0, hash table -
16:45:17.34: Failed.
16:45:17.34: Rewrite: "$*", position 0, rewrite database -
16:45:17.34: (domain database does not exist)
16:45:17.34: Failed
16:45:17.34: Rewriting: Mbox = "postmaster", host = "mail1", domain = "mail1.hathway.com", literal = "", tag = ""
16:45:17.34: Rewrite: "mail1.hathway.com", position 0, hash table -
16:45:17.34: Found: "$U%[email protected]"
16:45:17.34: New mailbox: "postmaster".
16:45:17.34: New host: "mail1.hathway.com".
16:45:17.34: New route: "mail1.hathway.com".
16:45:17.34: New channel system: "mail1.hathway.com".
16:45:17.34: Looking up host "mail1.hathway.com".
16:45:17.34: - found on channel l
16:45:17.34: Routelocal flag set; scanning for % and !
16:45:17.34: Mapped return address: [email protected]
*** Debug output from rewriting a forward header address:
16:45:17.34: Rewriting: Mbox = "systeam", host = "hathway.net", domain = "$*", literal = "", tag = ""
16:45:17.35: Rewrite: "$*", position 0, hash table -
16:45:17.35: Failed.
16:45:17.35: Rewrite: "$*", position 0, rewrite database -
16:45:17.35: (domain database does not exist)
16:45:17.35: Failed
16:45:17.35: Rewriting: Mbox = "systeam", host = "hathway", domain = "hathway.net", literal = "", tag = ""
16:45:17.35: Rewrite: "hathway.net", position 0, hash table -
16:45:17.35: Found: "$U%[email protected]"
16:45:17.35: New mailbox: "systeam".
16:45:17.35: New host: "hathway.net".
16:45:17.35: New route: "mail1.hathway.com".
16:45:17.35: New channel system: "mail1.hathway.com".
16:45:17.35: Looking up host "mail1.hathway.com".
16:45:17.35: - found on channel l
16:45:17.35: Routelocal flag set; scanning for % and !
16:45:17.35: Rewrite rules result: [email protected]
16:45:17.35: Applying reverse database to: [email protected]
16:45:17.35: No match -- no such entry.
forward channel = l
channel description =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITMULTIPARTS
channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
channel flags #5 =
channel flags #6 = LOCALUSER REPORTHEADER
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = hathway.com hathway.com
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = mail1.hathway.com
channel queue 0 name = LOCAL_POOL
channel queue 1 name = LOCAL_POOL
channel queue 2 name = LOCAL_POOL
channel queue 3 name = LOCAL_POOL
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = [email protected] (route (mail1.hathway.com,mail1.hathway.com)) (host hathway.net)
envelope From: address = [email protected]
name =
mbox = systeam
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
systeam.hathway.net@ims-ms-daemon
nasser.hathway.net@ims-ms-daemon
sayed.hathway.net@ims-ms-daemon
sameerm.hathway.net@ims-ms-daemon
daji.hathway.net@ims-ms-daemon
umanga.hathway.net@ims-ms-daemon
6 expansion total.
*** Debug output from submitting an envelope address:
16:45:17.37: mmc_wadr(0x0005ef70,'[email protected]','[email protected]') called.
16:45:17.37: Copy estimate before address addition is 1
16:45:17.37: Parsing address [email protected]
16:45:17.37: Rewriting: Mbox = "systeam", host = "hathway.net", domain = "$*", literal = "", tag = ""
16:45:17.37: Rewrite: "$*", position 0, hash table -
16:45:17.37: Failed.
16:45:17.37: Rewrite: "$*", position 0, rewrite database -
16:45:17.37: (domain database does not exist)
16:45:17.37: Failed
16:45:17.37: Rewriting: Mbox = "systeam", host = "hathway", domain = "hathway.net", literal = "", tag = ""
16:45:17.37: Rewrite: "hathway.net", position 0, hash table -
16:45:17.37: Found: "$U%[email protected]"
16:45:17.37: New mailbox: "systeam".
16:45:17.37: New host: "hathway.net".
16:45:17.37: New route: "mail1.hathway.com".
16:45:17.37: New channel system: "mail1.hathway.com".

Your first mistake. . .
Hi we are running Iplanet mssaging Server 5.2 p1 running in dirsync mode
please get off dirsync mode. There are bugs with dirsync that will never be fixed. 5.2p1 is well over a year old, and there're hundreds of fixed bugs there. 5.2p2 is available for free, on Sun's web site.
You still have some dirsync problems.

Database does not exist in the specified path

Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working. Can anyone help??

Jared,
It sounds like VI Logger somehow lost its association with its
database. Please open MAX and check out the "Historical
Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
right-hand pane, you should have a database called "VI Logger Data". It
must be spelled, spaced, and capitalized the exact same way. If you do
not have this database (which I suspect you do not), right click on "My
Computer" and select "Create/Attach Database..." The default database
path (if you want to have access to your old data) is C:\Documents and
Settings\All Users\Application Data\National Instruments\VI Logger,
with the database name as "VI Logger Data". If you want to create a new
database, then specify a new path.
If "VI Logger Data" does appear, a possible fix is to detach and
reattach it. Right click on "VI Logger Data," select
"Detach/Delete...," and chose the "Detach" option. Finally, reattach
the database as described above.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

Error 1065 database does not exist

while starting the concurrent manager service in windows 2003
im getting this error
solution plz

error 1065 database does not exist Check the CM log file and the Event Viewer for more details about the error.

Database could not be opened. May be caused because database does not exist or lack of authentication to open the database.

Hello,
I've been running the DMV 'sys.event_log', and have noticed that I am getting a lot of errors about connection issues to some of my SQL Azure databases saying "Database could not be opened. May be caused because database does not exist or lack of authentication
to open the database."
The event type column says: 'connection_failed' and the event_subtype_desc column says: 'failed_to_open_db' both are associated with the above error message.
I know that these databases are on-line as I have numerous people connected to them, all of whom are not experiencing any issues. My question is, is there a query that you can run on SQL Azure to try and find out a bit more information about the connection
attempts?
If this was a hosted SQL solution it would be much easier.
Marcus

Hello,
As for Windows Azure SQL Database, we can't access the error log file as On-premise SQL Server. Currently, it is only support troubleshooting the connection error with the following DMV. The SQL database connections events are collected and aggregated in
two catalog views that reside in the logical master database: sys.database_connection_stats and sys.event_log. We can use sys.event_log view to display the details if there is error occurs.
Just as the connection failed describe, it may ocurrs when user didnot has login permission when connect to the SQL Database. If so, please verify the user has logon permission.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

My cursor frequently stops working. It still moves but nothing happens when I click with it. Also, when I go for support Apple tells me my serial number does not exist but I am sure I am entering the correct one.

My arrow cursor changes unexpectedly to the "tall I" cursor and then I can't open links.
My two delete buttons only work one letter/number at a time.
When I go for Apple support it says my serial number does not exist? But I know it is correct!

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Error in pakcage table or view does not exist but on sql prompt query works

Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
The below package compiled in system user and trying to query on view v$session_wait however getting below error.
PACKAGE BODY SYSTEM.PK_DB_ALERT
On line: 212
PL/SQL: ORA-00942: table or view does not exist
I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
SELECT SID, seq#, event, wait_time
FROM v$session_wait
WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
ORDER BY 2

SDD wrote:
Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
SY.
Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

Wrong error message no. F6556 - Fund Centre does not exist but it do exists

Hello Gurus,
I am trying to transfer an Old PO to Funds Centre by changing the delivery quantity in PO but the delivery date in the PO is of June 2014. I have defined the derivation strategy and system is deriving fund centre correctly but it says that Fund Centre does not exists on delivery date which is 30.06.2014. I have created fund centre from 01/01/1900 till 31/12/9999.
I tried to use FMCN it also gives the error message saying that fund centre does not exist even on current date.
For testing I posted some FI document to that fund centre and it posted.
I am not sure why it is giving error only for PO (PO has a account assignment to project/WBS).
Thanks in advance!
Regards
Rohit Goel

Hello Eli,
The problem was that WBS was using the wrong cost centre with two leading zeros (User created wrong cost centre in test system with 8 character which means 2 leading zeros as prefix) but as per the cost centre structure it should have only one leading zero and rest nine characters must be numeric. I have created a fund centre with one leading zero and that's why system was giving error when using derivation strategy as it is picking cost centre from WBS master data but fund centre was created with one leading zero hence the error was coming. when I was defualting the fund centre specifically for the WBS it was picking because I was giving the correct fund centre.
You also recommended something about leading zeros but it was not fully applicable in our case as we have defined the derivation startegy of populating the cost centre in fund centre field and our cost centre is of 9 chararcter (in table it shows with a leading zero to make it full 10 character) but when it gets populated in fund centre field it gets populated with leading zero means it takes a leading zeros into consideration when it gets derived from cost centre. For example if my cost centre is '123456789' the fund centre gets populated as '0123456789'
But I got the clue to my problem from your hint of leading zeros.
Thanks Once again!
Regards
Rohit Goel

G/L account does not exist but cannot create G/L account.

Hi Guys
i got this error which says G/L account NO. 121000 does not exist in the chart of accounts INT, but when i tried to create the G/L account in FS00, the system says ths G/L account exists in company code PS01.this company code PS01 has the chart of accounts INT. suggestions are welcome.
Thanks and Regards
Vignesh

Hi,
interesting... the message means GL account is not created in chart of accounts INT (FSP0) but if its availabe in another comp. code with the same chart of accouns it MUST be created in INT. Try to create it for your particular company code (FSS0).
T-Code FS00 covers both views.
Best regards, Christian

Why can i not add my file to an attachment, it keeps saying it does not exist, but when i use explorer it works fine?

I was trying to upload my written assignment for a class to attach it to an email. The document was in Microsoft work 2007 version. It would not attach it just kept saying that the file is invalid or does not exist. I downloaded explorer and that browser attached the file just fine.

Kaplan university online it is my assignment for school the url is kucampus/kaplan.edu it is for students of kaplan. I have never had this issue.

Database link does not exists but possible to access

Hi All
I have a case that I don't get.
I have these database links
select owner, db_link from dba_db_links
OWNER DB_LINK
OWBUSER OWB_34.REGRESS.RDBMS.DEV.US.ORACLE.COM
OWBUSER OWB_22.REGRESS.RDBMS.DEV.US.ORACLE.COM
AP2DW TEST.AP2.SE
AP2DW SCPROD.AP2.SE@AP2DW_CONN1
AP2DW DW_VISMA.AP2.SE@VISMA_LOCATION_0
AP2DW DWDEV_AP2DW.AP2.SE
I have a sql that refrences this database_link SCPROD@AP2DW_CONN1
If I execute a simple select using the link I got rows back, shouldn't I get
ORA-02019: connection description for remote database not found
select count(1) from SCDAT.A_HOLKEYS@SCPROD@AP2DW_CONN1;
COUNT(1)
407615
Obviously I'm missing something but right now I can't figure it out
Global_name = false
domain_name is unset
Anyone that can help me ?
Thanks
Magnus

>
AP2DW SCPROD.AP2.SE@AP2DW_CONN1
AP2DW DW_VISMA.AP2.SE@VISMA_LOCATION_0
AP2DW DWDEV_AP2DW.AP2.SE
I have a sql that refrences this database_link SCPROD@AP2DW_CONN1
If I execute a simple select using the link I got rows back, shouldn't I get
ORA-02019: connection description for remote database not found
select count(1) from SCDAT.A_HOLKEYS@SCPROD@AP2DW_CONN1;
COUNT(1)
407615
Obviously I'm missing something but right now I can't figure it out
Global_name = false
domain_name is unset
Anyone that can help me ?
Thanks
MagnusFrom the Create Database Link doc:
USING 'connect string'
Specify the service name of a remote database. If you specify only the database name, then Oracle Database implicitly appends the database domain to the connect string to create a complete service name. Therefore, if the database domain of the remote database is different from that of the current database, then you must specify the complete service name.So the domain .AP2.SE is implicitly being appended to your connect string. I think somewhere in the older upgrade docs it explains the default domain changed in 8i or net8 or something.

Container passwd does not exist

Hello
I have a problem with the Directory Server 5.2 on a Solaris 10 System.
I have make following steps:
1. idsconfig started with this options:
1 Domain to serve : mthnet.local
2 Base DN to setup : dc=mthnet,dc=local
3 Profile name to create : default
4 Default Server List : 192.168.42.102
5 Preferred Server List :
6 Default Search Scope : one
7 Credential Level : proxy
8 Authentication Method : simple
9 Enable Follow Referrals : FALSE
10 iDS Time Limit :
11 iDS Size Limit :
12 Enable crypt password storage : TRUE
13 Service Auth Method pam_ldap :
14 Service Auth Method keyserv :
15 Service Auth Method passwd-cmd:
16 Search Time Limit : 30
17 Profile Time to Live : 43200
18 Bind Limit :
When i testing the server with ldapsearch is this the output:
ou=profile,dc=mthnet,dc=local
ou=profile
objectClass=top
objectClass=organizationalUnit
cn=proxyagent,ou=profile,dc=mthnet,dc=local
cn=proxyagent
sn=proxyagent
objectClass=top
objectClass=person
userPassword={crypt}c7O14yBojLda2
cn=default,ou=profile,dc=mthnet,dc=local
objectClass=top
objectClass=DUAConfigProfile
defaultServerList=192.168.42.102
defaultSearchBase=dc=mthnet,dc=local
authenticationMethod=simple
followReferrals=FALSE
defaultSearchScope=one
searchTimeLimit=30
profileTTL=43200
cn=default
credentialLevel=proxyThe server is also running! Then i add a client to ldap, but, it is only possibal manual. When i testing the client i have following output:
ou=profile,dc=mthnet,dc=local
ou=profile
objectClass=top
objectClass=organizationalUnit
cn=proxyagent,ou=profile,dc=mthnet,dc=local
cn=proxyagent
sn=proxyagent
objectClass=top
objectClass=person
userPassword={crypt}c7O14yBojLda2
cn=default,ou=profile,dc=mthnet,dc=local
objectClass=top
objectClass=DUAConfigProfile
defaultServerList=192.168.42.102
defaultSearchBase=dc=mthnet,dc=local
authenticationMethod=simple
followReferrals=FALSE
defaultSearchScope=one
searchTimeLimit=30
profileTTL=43200
cn=default
credentialLevel=proxyOkay, now i will add the /etc files to the server with this command:
ldapaddent -D "cn=Directory Manager" -w dm_test -f /var/tmp/passwd passwdIt's not possible, i give a error message:
Container passwd does not exist
But, where is the problem? I have no idea where the probelm is.
Can you help me?
Sorry for my bad english!
Message was edited by:
MTH

I think you got to run idsconfig and add SSDs (container for name service databases).
Do you wish to setup Service Search Descriptors (y/n/h)? [n] y
A Add a Service Search Descriptor
D Delete a SSD
M Modify a SSD
P Display all SSD's
H Help
X Clear all SSD's
Q Exit menu
Enter menu choice: [Quit] A
Enter the service id: passwd
Enter the base: ou=People,dc=example,dc=com
Enter the scope: one
A Add a Service Search Descriptor
D Delete a SSD
M Modify a SSD
P Display all SSD's
H Help
X Clear all SSD's
Q Exit menu
Enter menu choice: [Quit] A
Enter the service id: group
Enter the base: ou=group,dc=example,dc=com
Enter the scope: one
A Add a Service Search Descriptor
D Delete a SSD
M Modify a SSD
P Display all SSD's
H Help
X Clear all SSD's
Q Exit menu
Enter menu choice: [Quit] A
Enter the service id: shadow
Enter the base: ou=People,dc=example,dc=com
Enter the scope: one
A Add a Service Search Descriptor
D Delete a SSD
M Modify a SSD
P Display all SSD's
H Help
X Clear all SSD's
Q Exit menu
Enter menu choice: [Quit] A
Enter the service id: netgroup
Enter the base: ou=netgroup,dc=example,dc=com
Enter the scope: one
A Add a Service Search Descriptor
D Delete a SSD
M Modify a SSD
P Display all SSD's
H Help
X Clear all SSD's
Q Exit menu
Enter menu choice: [Quit]
Summary of Configuration
1 Domain to serve : example.com
2 Base DN to setup : dc=example,dc=com
3 Profile name to create : default
4 Default Server List : ldap1.example.com ldap2.example.com
5 Preferred Server List :
6 Default Search Scope : one
7 Credential Level : proxy
8 Authentication Method : simple
9 Enable Follow Referrals : FALSE
10 iDS Time Limit :
11 iDS Size Limit :
12 Enable crypt password storage : TRUE
13 Service Auth Method pam_ldap :
14 Service Auth Method keyserv :
15 Service Auth Method passwd-cmd:
16 Search Time Limit : 30
17 Profile Time to Live : 43200
18 Bind Limit : 10
19 Service Search Descriptors Menu
Enter config value to change: (1-19 0=commit changes) [0] 19
Do you wish to setup Service Search Descriptors (y/n/h)? [n] y
A Add a Service Search Descriptor
D Delete a SSD
M Modify a SSD
P Display all SSD's
H Help
X Clear all SSD's
Q Exit menu
Enter menu choice: [Quit] P
Current Service Search Descriptors:
==================================
passwd:ou=People,dc=example,dc=com?one
group:ou=group,dc=example,dc=com?one
shadow:ou=People,dc=example,dc=com?one
netgroup:ou=netgroup,dc=example,dc=com?one
=====
If you have done correctly, later you should be seeing a line:
5. Top level "ou" containers complete.
...

Table does not exists.

I M TRYING TO TAKE EXPORT OF A TABLE BUT I M GETTING ERROR THAT TABLE DOES NOT EXISTS BUT ACTUALLY TABLE EXISTS... PLEASE SUGGEST Y I M GETTING THIS ERROR.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options
SQL> select table_name from user_tables where table_name='CSCNF';
TABLE_NAME
CSCNF
SQL> select object_name,object_type from user_objects where object_name='CSCNF';
OBJECT_NAME OBJECT_TYPE
CSCNF TABLE
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options
[oracle@~]$exp musr/musr file=tab.dmp tables=CSCNF
Export: Release 11.2.0.1.0 - Production on Thu Jun 17 16:28:51 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing option
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
EXP-00011: MUSR.CSCNF does not exist
Export terminated successfully with warnings.

[oracle@~]$sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Jun 17 16:40:48 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options
SQL> conn musr/musr
Connected.
SQL> sho user
USER is "musr"
SQL> select table_name from user_tables where table_name='CSCNF'
2 ;
TABLE_NAME
CSCNF
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options
[oracle@~]$

Error message: "KNA1 does not exist, KNVI does" at Customer creation

Hi all,
I have created a new Account group (copy of an existing) and assigned an external number range.
I have no problems entering the General data or Company code data but when going to Sales area data I get the following error message:
Check: Table KNA1 does not exist, table KNVI does
Message no. F2 061
Please let me know if you have any idea around the error.
Thanks,
//anders

Have you archived the previous customer?
If so the records in the table KNA1 was archieved and KNVI was not archieved.
In other words, There is inconsistencies in the database tables KNA1 and KNVI, that is table KNA1 that is main table for customer says that the customer does not exists but table KNVI for tax classification gives tax details for the customer.

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Database does not exist, but visible in EAS console

Similar Messages

Maybe you are looking for