Database error 3997 at EXE in ECC 5.0
Hi,
I am getting this error in SAM system log "<b>Database error 3997</b>".
And the OS collector (RSCOLL00) is failling on peak time and its showing the same type of error " SQL error 3997".
Pls suggest me to solve this issues.
--gopi
Hi,
I am getting this error in SM21 system log "Database error 3997".
And the OS collector (RSCOLL00) is failling on peak time and its showing the same type of error " SQL error 3997".
Pls suggest me to solve this issues.
--gopi
Similar Messages
-
In SM21 - Database error 235 at EXE
Hello Gurus,
In sm21 - Database error 235 at EXE this error shown in our test server, while investigating I found this
( I am attaching log for your reference )
Details
Recording at local and central time........................ 25.03.2009 23:02:24
Task................ 15116 / Background Processor No. 18
User................ CSCADMIN_BC
Client.............. 050
Terminal............
Session............. 1
Transaction code....
Program name........ RSORAHST
Problem class....... K SAP Web AS Problem
Development class... SBAC
Module name......... dbds
Line................ 798
Table name.......... 235
Field name.......... EXE
Documentation for system log message BY 2 :
After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
Technical details
File................ 018863
Position............ 0000235620
Entry type.......... h ( Database Error (Non-SQL) )
Message ID.......... BY 2
Variable parts...... 235 EXE dbds 798
The given program associated with this job SAP_PERIODIC_ORACLE_SNAPSHOT but this is run successfully on the test server.
Can somebody tell me the error & the rectification for the same
Thanks & regards
ShishirPlease check
- ST22 for dumps
- alert<SID>.log of the database
- dev_w18 tracefile
Do you use the same patches on both DEV and this system?
Markus -
Start ALert Router failed with Database Error -444 SQLstate 42724
HI,
When I create a stored procedure SAPCL and follow the subsequents steps & Verify SAPCL is running, I get the message SAPCL stored procedure has been successfully installed.
Then when I Load the ALert Router(SUccessful) and start the ALert Router, I get the following message.
Database error -444 at EXE
> [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -444, ERROR: USER
> PROGRAM SAPCL COULD NOT BE FOUND
> DSNT418I SQLSTATE = 42724 SQLSTATE
> RETURN CODE
> DSNT415I SQLERRP = DSNX9CAC SQL
> PROCEDURE DETECTING ERROR
> DSNT416I SQLERRD = 0 0 0 -1 0
> 0 SQL DIAGNOSTIC INFORMATION
> DSNT416I SQLERRD = X'00000000'
> X'00000000' X'00000000' X'FFFFFFFF' X'00000000'
> X'00000000' SQL DIAGNOSTIC INFORMATION
Can you please let me know a few pointers in this regard.Hi,
ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10704] B ***LOG BV3=> severe db error 12154 ; work process is stopped
[dbsh#2 @ 1199] [dbsh 1199 ] B ***LOG BY2=> sql error 12154 performing CON [dblink#3 @ 431] [dblink 0431 ] B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified
Make a connectivity test with: "R3trans -d" and supply trans.log along with dev_w0 and dev_w1 traces.
Please refer Note 443867 - ORA-12154 Collective SAP note and correct your TNSNAME.ora and LISTENER.ORA entries.
Also see Note 34479 - Collective note for problems with SQL-Net V2 ORACLE.
Regards,
Bhavik g. Shroff -
DSO data Activation Time out-DATABASE ERROR-440
Hello all,
We are getting error in one of our standard DSO during activation -Error-Process 000001 did not confirm within the permitted time period,we repeated process chain ,we got the same error,we activated manually -we got the same error, I need to mention that we only have 3278 records which should not take more than few seconds-minutes to activate. we reset RSODSO_SETTINGS wait time by increasing still did do it , we changed data package 10,000 ,50,000 but it didn't correct the error, we even change DSO SID generation setting during activation to never create SID ,it didn't correct the error, we reactivated DSO,we indexed the table both new and active table but we are getting the same error, in a SM21 we are getting error DATABASE ERROR -440 [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAMED > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND... DBA reorg and did some other things but we are still getting the same error and the are not sure what the procedure DSO_VERSION is ,Any body have any idea what that procedure is and why we are getting that in sm21 during one DSO data activation? Has anybody had this kind of experience before? by the way we have researched on google SCN and nothing close to our scenario. By the way we ran the activation with the different settings both in dialog and background.We also got error Background process BCTL_4Z81MSY8311QNTKRYGRDYVFXY terminated due to missing confirmation ...Any suggestions will be of great help and points will be awarded....
Thank you.Error in Sm21-
04:57:20 BTC 036 810 PRGRAU0 BY 2 Database error -440 at EXE
04:57:20 BTC 036 810 PRGRAU0 BY 0 > [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAME
04:57:20 BTC 036 810 PRGRAU0 BY 0 > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND
04:57:20 BTC 036 810 PRGRAU0 BY 1 Database error -440
Background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA terminated due to missing
confirmation
Message no. RSODSO_PROCESSING041
Diagnosis
The confirmation from the background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
did not occur within the set time. It was thus ended by the system.
System Response
Background process: BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
Number: 1
Procedure
Check the package size for the application to be processed or change the
package size. -
Database error text: invalid number
Hi Gurus,
I am calling a procedure proxy from ECC and it is giving me a short dump:
Error 339 has occurred while executing database procedure
""_SYS_BIC"."Krishna_Demo_Proj.Model/KC_GET_MARA"" on the
current database connection "R/3".
Database error text: invalid number: ''
Triggering statement: "dsql_open_proc"
I have created a table with only one field.
Mapped the Data types after creating the Procedure Proxy
Which data type I need to use? I tried with lots of combinations but, still the same error.
Regards,
Krishna ChauhanHi Srinu,
I have used NVARCHAR 18 and corresponding to that CHAR18 is used.
Please see the attached screen shots.
Regards,
Krishna Chauhan -
Potential Windows Update database error detected 0x80070490
This is the response I get when I run the Windows update troubleshooter from the Windows 8.1 Action Center. If I click next it reports the errors have been fixed. However if I run it again it reports exactly the same errors.
After searching the Internet I have found that several users have reported having this issue. As result of the aforementioned search I have tried the following:
1) Run the Fixit tool for Windows 8.1 located at:
http://support.microsoft.com/kb/971058/en-us.
2) Run the System Update Readiness commands: DISM.exe /Online /Cleanup-image /Scanhealth and DISM.exe /Online /Cleanup-image /Restorehealth located at:
http://support.microsoft.com/kb/947821/en-us.
3) Saved contents of C:\Windows\System32\catroot2 to a temp folder and then deleted contents of C:\Windows\System32\catroot2.
4)Renamed C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old
5) Restarted Windows 8.1.
6) Verified that C:\Windows\System32\catroot2 and that C:Windows\SoftwareDistribution folders had been rebuilt.
7) I then ran the Windows update troubleshooter from the Window 8.1 Action Center again and got the same response as listed above. The errors still exist and are not fixed.
8) Finally, I downloaded Windows 8.1 Enterprise Evaluation and I did a completely new clean install of Windows 8.1 and without installing anything else (no updates, no software, no antivirus) the above errors appeared within minutes after connecting
to the internet. I checked using the Windows update troubleshooter several times before connecting to the Internet and each time no problems were found, but shortly after I connected the above errors are shown to exists.
Any suggestions that will help fix this issue will be of great help.Did anyone ever find an actual fix for this problem? I have a very similar problem. I have gone through the same steps for fixing my issues with getting a message of problems found every time I run the Windows Update troubleshooter. It
continually finds what it says are Potential Windows Update Database error detected 0x800700D and says they are fixed, along with another message saying Windows Update components must be repaired and it says they are fixed as well. However, each time
I run the troubleshooter it finds the same issues. I have no problems running Windows Update under Windows 8.1 and them all installing without issue, yet I can't download or update ANY apps within the MS store and like the problem above, when it looks
for my apps it says it's having problems finding them and to try later. If I try to download even a free app, I get an error message that something happened and your purchase can't be completed. Error code: 0x80096004.
I have dug through everything I can find on this error message and tried changing my sign in on my laptop to a local account, created a new MS account to access the store and continue to get the same error message. I have tried it with my Kaspersky
Internet Security 2015 turned completely off. I've also ran SFC scannow and there are no errors and have ran DISM which found a problem but says it was fixed. After running it again, there were no errors. I have no other problems with anything
else (that I know of on my machine). It is an Asus Q400A and came with Windows 8.0. I ran all the updates and then upgraded to 8.1 through the MS store without issue. I have installed all updates since upgrading to 8.1 and have absolutely
no problem running ANY updates, but can't seem to access the store no matter what I try.
If anyone has found a solution to this I'd appreciate your input. Hard to believe MS would put out a product that has such a basic problem that has affected so many users and can't seem to come up with some resolution that doesn't require registry
editing, running commands from elevated command prompts, and a CS degree to resolve--there are soooo many issues online regarding this kind of error and others related to running SFC and DISM...most ending up in their ultimate default answer....renew or reinstall
Windows and all the updates....which still doesn't resolve the problem for many! I've always been a PC guy, but I'm starting to like the MacBook Pro I picked for work related reasons with great hesitation. I've wasted more time chasing this issue
down than I all the time I've spent actually using the Mac without even a hitch!
Thx in advance for any feedback....please no MAC blasting....at this point, it would be not well received!! -
ARGENT:error in java.exe operating server (after updating remote dbase)
Hello,
I am getting big trouble in java.exe which is running server program.
interface : swings
windows: NT 4.0
database: MS access97
jdk 1.3 (jsdk2)
Dr. watson of NT reporting the error in java.exe(of server) that application error has occured and this is happening every time after i update or write something into the database. Currently i am doing it on localhost m/c.Error: "the instruction at "0x77b3cd19"
referenced memory at 0x77b3cd19".The memory could be read/"
//server code
import java.rmi.*;
import java.rmi.server.*;
public class LoginServer {
public LoginServer() {
try {
Login c = new LoginImpl();
Naming.rebind("login", c);
} catch (Exception e) {
System.out.println("Trouble: " + e);
public static void main(String args[]) {
new LoginServer();
//Remote functions implementation
import java.rmi.*;
import java.rmi.server.*;
import java.sql.*;
public class LoginImpl extends UnicastRemoteObject implements Login
public LoginImpl() throws RemoteException
super();
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
} catch(Exception e) { System.err.print("Exception: ");
System.err.println(e.getMessage());}
//register new user take name and password as arguement and creates
// new user and set status OFF (ie user not logged in)
public int NewUser(String n,String p) throws RemoteException
String url = "jdbc:odbc:Authentic";
int i=2;
Connection con;
Statement stmt;
ResultSet rs;
try {
con = DriverManager.getConnection(url, "anything", "anything");
stmt=con.createStatement();
rs = stmt.executeQuery("SELECT NAME FROM TAUTHENTIC");
while (rs.next()) {
String nam = rs.getString("NAME");
if((n.equalsIgnoreCase(nam)))
i=1;
rs.close();
stmt.close();
con.close();
break;
f (i==2) {
stmt.executeUpdate("INSERT INTO TAUTHENTIC "+"VALUES'"+n+"','"+p+"','OFF')");
i=3;
rs.close();
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
return i;
//verifying usre and password and then checking status if off turns on else cant verify.
public int VerifyUser(String s,String p) throws RemoteException
{ int i=0;
String url="jdbc:odbc:Authentic";
String status="OFF";
Connection con;
Statement stmt;
ResultSet rs;
try {
con = DriverManager.getConnection(url, "anything", "anything");
stmt=con.createStatement();
rs = stmt.executeQuery("SELECT NAME, PASSWORD, STATUS FROM AUTHENTIC");
while (rs.next()) {
String nam = rs.getString("NAME");
String pas = rs.getString("PASSWORD");
String sta=rs.getString("STATUS");
if((s.equalsIgnoreCase(nam))&&(p.compareTo(pas)==0))
if(status.compareTo(sta)!=0)
{i=5; break;}
if((s.equalsIgnoreCase(nam))&&(p.compareTo(pas)==0)&&(status.compareTo(sta)==0))
System.out.println("Hi " +nam + " you are in our stock program now");
i=1;
break;
if(i==0)
System.out.println("Sorry either user dont exist or invalid user name or password");
rs.close();
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
return i;
//changes status each time user logged in or logged off
public void cstatus(String name,String status) throws RemoteException
String url="jdbc:odbc:Authentic";
Connection con;
Statement stmt;
try {
con = DriverManager.getConnection(url, "anything", "anything");
stmt=con.createStatement();
stmt.executeUpdate("UPDATE TAUTHENTIC SET STATUS ='" + status + "' WHERE NAME LIKE '" + name + "'");
stmt.close();
con.close();
catch(Exception ex){ System.out.println("Exception: "+ex.getMessage());}
i have used swings to call these functions. Updation is happwning but also bringing runtime server application halt.
//if u need i can mail u my GUI client file from where i am making my RMI connections. my email is [email protected]. Please reply back as soon as possible as i am working on a java project of software agents and have to complete it by this month.
thanx and bye for nowFormat this mess.
http://forum.java.sun.com/faq.jsp#format -
Database error 22001 & database error 22001 FET
Hi
I am not sure, if this is the right forum for this question.
I am getting Database Error: <u>Database error 22001 & Database Error 22001 FET</u> continously in my event log.
Their is an OSS note which suggest that we upgrade R3TRANS.EXE.
I am on CRM 4.O SP8 on Windows/MSSQL 2000 platform. Kernel and R3Trans are upgraded with latest patch.
<b>R3trans is running with no errors.</b>
Any suggestions would be great.
Kind Regards
deekshantHi Ashok,
the SQL-443 indicates an error in a procedure:
-443 ROUTINE routine-name (SPECIFIC NAME specific-name) HAS RETURNED AN
ERROR SQLSTATE WITH DIAGNOSTIC TEXT msg-text
Explanation:
An SQLSTATE was returned by routine routine-name, along with message text msg-text.
System Action:
Execution of the SQL statement is terminated.
Programmer Response:
Contact the author of the routine or your database administrator. Until the problem is resolved, the routine should not be used.
SQLSTATE:
xxxxx (the SQLSTATE that was returned by the routine).
The name SNAPSHOT_DBM leads me to this site
http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsp?topic=/com.ibm.db2.udb.admin.doc/doc/r0007093.htm
So i think your db2 is running under linux/unix/windows so have a look at the DB6 forum.
best regards
Kay -
USMM: Database error reading table TUMRES
Dear Experts,
i want to make an export to LAW file with SAP program RSLAW_PLUGIN.
In some of the systems the export (by downloading a file) works but in this ECC 6.0 the result is an error message:
Database error reading table TUMRES
Message no. BV103
The message contains no other information.
Knows anybody a solution for this error?
For any answers i would be very happy.
Thanks and best regards
MichaelHi All,
I am having similar issue, As mentioned above TUMRES is empty in SE 16.
I have rerun the measurement but background job is cancelling with
28.11.2014 09:48:27 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Thanks
Sam -
Database error: TemSe- RTAB-S/G(8)- 4 for table TCPSBUILD key
Hi,
I am checking in sm21, I getting continously this syslog Database error: TemSe->RTAB-S/G(8)->4 for table TCPSBUILD key.
I deleted records of past 10 days from TST03 table.
but still I am getting this error in SM21.
Would anyone please suggest on this?
MY sap Component is SAP ECC 6.0
Thanks in advance.
Regards,
ManishHi all,
I have the same message but on the Windows event viewer.
Because of this, backups are failing.
When I try to make a consistensy check throught SP12 there is a dump:
The program "RSTS0020" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
I have tried to launch also the RSTS0030 program in dialog, no objects are found.
Can someone help please? -
Database error when updating table ADRC
Hi,
We are on ECC 5.0 & are facing a problem whille maintaining anything relevant to table ADRC.
For eg., if we try to maintain storage location or create a vendor code (XK01), for some inputs it works ...but most times the update just terminates with a message "Database error when changing table ADRC".
Pls. help.
Thanks,
Saba.Hi
You can refer to following SAP Notes in case they help:
385440 Repairing inconsistencies in Customizing addresses
417809 Customizing objects display incorrect addresses
186910 Customers / vendors with incorrect address
Otherwise i want to know more about the error you are getting to help you in better way.
Thanks and Regards
Esha Rajpal -
Single Primary Site running SCCM 2012 SP1 with SQL 2008 SP3 CU14 on Windows Server 2008 SP1.
We are in process of upgrading to SCCM 2012 R2.
Ran the ConfigMgr 2012 R2 setup with the /TESTDBUPGRADE on SQL Server.
F:\SMSSETUP\BIN\X64\setup.exe /testdbupgrade
cm_bc1
Error: SQL Instance hosting an active site database, error cannot run Testdbupgrade on a SQL Instance which host an active site database.
We are using s-syscenter account which has SA rights on SQL and added as local admin.You should run Testdbupgrade on a copy of your database (ie a backup) rather than the "live" database.
Note that you cannot upgrade a database once you have run Testdbupgrade on it.
See here for more information
http://technet.microsoft.com/en-us/library/jj865691.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026ZOK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money. -
BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD. -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.
Maybe you are looking for
-
Burning discs that work in low-end DVD players
Hi everybody. Situation: I'm burning DVDs of a rough cut of a documentary for festivals and various interested parties. I'm burning with DVD SP. I was using Memorex 16X DVDs. The resulting DVDs work on computers and most DVD players. But they don't w
-
How to add Material photo in SAP
Hi folks, Does anybody know how to add material photo to material No? As now, when our old spare parts are bad, maintanance user have to find a new one to replace, so they need to provide the material No to warehouse user or purchase dept.
-
Can changing mime types on server fix QTL in Quicktime X
Can changing mime types on server fix QTL in Quicktime X Is there anything we can do on the server end to make Quicktime X recognize QTL files? We found that changing .qtl files to .mov files fixed it, but we have hundreds of .qtl files and it would
-
hi, I must create a picture (a connected graph exactly) with points and arrows stored somehow on db tables, then display it on a form (Best of all would be the possibility to create and modify the graph in place). I haven't any idea how to handle thi
-
Call Function from SSIS package
Hello. I have a field pulled from an Access database that I need to manipulate before processing. I need to strip out illegal characters. What's the best way to use a function to process the data in the table. I was hoping to do this within the p