Database error says connect by clause for Oracle10g
Hi All,
I am trying to select details from anodestable where error says SQLException connect by clause is required in this query block.
Please respond if you know how to resolve this error.
Thanks in advance.
Bye
Katheresh wrote:
Hi All,
I am trying to select details from anodestable where error says SQLException connect by clause is required in this query block.
Please respond if you know how to resolve this error.
Thanks in advance.
ByeCould you post the SQL code and the error you got?
Similar Messages
-
Database error: TemSe- XRTAB(3)- 1 for table TST01 key
Hi Sap Gurus,
BZ Y Unexpected return value 1 when calling up DbSlR
BY J Function ROLLBACK on connection R/3 failed
R3 9 Error in DB rollback/SyFlush, return code 016384
BY 4 Database error 0 at UPD access to table TST01
BY 0 >
F6 H Database error: TemSe->XRTAB(3)->1 for table TST01 key
Q0 2 Stop Workp. 14, PID 4186340
Q0 1 Start Workp. 14, 16 times since system startup. PID 9 646770
F6 F TemSe object JOBLGX22303300X49850 was closed remotely
F6 V Invalid address (NULL) was transferred
EC F Failed to create the log for job No joblog, 4C412205C6C80300E1008
R4 7 Delete session 001 after error 023
Q0 I Operating system call getaddrinfo failed (error no. 0 )
Q0 I Operating system call getaddrinfo failed (error no. 0 )
BZ Y Unexpected return value 1 when calling up DbSlR
BY J Function ROLLBACK on connection R/3 failed
R3 9 Error in DB rollback/SyFlush, return code 016384
BY 4 Database error 0 at UPD access to table TST01
BY 0 >
F6 H Database error: TemSe->XRTAB(3)->1 for table TST01 key
Any idea to avoid the system log entries.
Regards
Munish JindalHi Munish,
For TemSe error first point of resolution will be at T - Code : SP12. In there select,
TemSe Data Storage --> Consistency Check. This will run for a while depending on the number of recored within the TSTO1 table. Once the execution is completed delete all the records displayed in red.
Apart from above step, you can use T - Code: SPAD. In there, you will find two tabs
a) Devices/servers
b) Admin.
within admin tab select "Delete Old Spool Request". You will see a popup. In there you can select "Request already printed" check box and Minimum Age in day <> depends on your requirement. I sugest for 7 days and execute. This also takes certain amount of time to get executed.
In the same T - Code: SPAD, Select Administration --> Check Consistency
Make sure Spool re-organizing job is scheduled that will be executed daily at night to clear spool requrest that are older than 10 days in age.
I guess this helps to some extent.
Regards,
Nani Chowdary -
Database Error: RSR0009: Resource not available for pool. Wait-time expired
i am occassionally receiving the following error during database connections in my servlet:
Database Error: RSR0009: Resource not available for pool [webAdvisorTestPool]. Wait-time expired
i understand that this is a result of a connection leak from improper closure of my Connection object, but i thought that i was properly closing my connection.
i can get the error if i do the following steps:
1) access my login page and enter login credentials.
2) submit the login which then hits the Authentication servlet.
3) Authentication servlet authenticates and takes me to home page.
4) hit the back button to get back to the login page.
5) repeat this process until i hit the Max Pool Size (from web server).
6) then i get the error message
here are some details:
i have an Authentication servlet; here is the pertinent code from that servlet:
try { // retrieve the user and add the User object to the session DAO dao = new DAO(); Person authenticUser = dao.getPerson(userID, password); session.setAttribute("validUser", authenticUser); redirectPage = mapping.findForward("success"); }
i also have a DAO object that handles all of my DB transactions (and you can see from my code above that the Authentication servlet is using that object); here is the pertinant code from that servlet:
public DAO() { datasource = "java:comp/env/jdbc/webAdvisorTest"; } public Person getPerson(String userID, String password) throws ObjectNotFoundException { // JDBC variables DataSource ds = null; Connection conn = null; PreparedStatement stmt = null; ResultSet results = null; // User variables Person validUser = null; try { // Retrieve the DataSource from JNDI InitialContext ctx = new InitialContext(); // if this statement fails, NamingException is thrown ds = (DataSource)ctx.lookup(datasource); // get DB connection and perform SQL operations conn = ds.getConnection(); // User variables String validUserID = null; String validFName = null; String validLName = null; String validEmail = null; // get DB connection and perform SQL operations conn = ds.getConnection(); stmt = conn.prepareStatement(PERSON_QUERY); stmt.setString(1, userID); stmt.setString(2, password); results = stmt.executeQuery(); // iterate through the results if (results.next()) { validUserID = results.getString("id"); validFName = results.getString("first_name"); validLName = results.getString("last_name"); validUser = new Person(validUserID, validFName, validLName); } } // handle SQL errors catch(SQLException e) { e.printStackTrace(System.err); throw new RuntimeException("Database Error: " + e.getMessage()); } // handle JNDI errors catch(NamingException e) { throw new RuntimeException("JNDI Error: " + e.getMessage()); } // clean up resources finally { doClosure(results, stmt, conn); } // if the user was not found, throw ObjectNotFoundException if(validUser == null) { throw new ObjectNotFoundException(); } return validUser; } protected void doClosure(ResultSet results, PreparedStatement stmt, Connection conn) { if (results != null) { try { results.close(); } catch (SQLException e) { e.printStackTrace(System.err); } } if (stmt != null) { try { stmt.close(); } catch (SQLException e) { e.printStackTrace(System.err); } } if (conn != null) { try { System.out.println("R18Resources.conn before close: " + conn); conn.close(); System.out.println("R18Resources.conn after close: " + conn); System.out.println("R18Resources.conn is closed? " + conn.isClosed()); } catch (SQLException e) { System.out.println("R18Resource conn close error: " + e.getMessage()); } } }
as you can see, i've added some print statements in my connection closure block. based on my output log, each connection is being properly closed and i am not encountering any errors during that closing block.
any ideas???
Message was edited by:
millerandPlease try the following code in your doClosure method. Replace your code with the following code.
public void doClosure(ResultSet pResultSet, Statement pStmt, Connection pConn) throws Exception {
try {
if (pResultSet != null) {
pResultSet.close();
pResultSet = null;
} catch (SQLException se) {
logger.error( se );
} finally {
try {
if (pStmt != null) {
pStmt.close();
pStmt = null;
} catch (SQLException se) {
logger.error(se);
} finally {
try {
if (pConn != null) {
pConn.close();
pConn = null;
} catch (SQLException se) {
logger.error(se);
And let me know if you still face this issue. What is the application server you are using? -
I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.
I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.
-
I upgraded to iOS 7 yesterday on my iphone and now none of my apps shows me any new message and when i open the apps it says "Connect to itunes for push notifications". Please help!!!
Same here. I don't know how to solve the problem, but I figured out a way to close the app without re-starting or resetting the phone. If you click ok and then press the home button twice really fast before the dialog box shows back up, you can put the phone in multi-tasking mode and close the app without having the shut the phone off or reset it. Anxiously awaiting the fix for this since I have several apps I use that I can access at the moment.
-
I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet ExplorerI keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer -
Database error: TemSe- XRTAB(0)- 1 for table TST01
Dear All
following error is showing in system log from yesterday every 3 minute intreval
SQL error 3114 . Work processes in reconnect status
Database error: TemSe->XRTAB(0)->1 for table TST01 key
[900]JOBLGX09372801X60922,1
Failed to read status entry for job SWWERRE
Failed to create log for job SWWERRE
Failed to read status entry for job SWWERRE
SQL error 3114 . Work processes in reconnect status
Database error: TemSe->XRTAB(0)->1 for table TST01 key
[900]JOBLGX09212801X09555,1
Failed to read status entry for job SWWDHEX
Failed to create log for job SWWDHEX
Failed to read status entry for job SWWDHEX
pl replyHi Baikerikar,
As per I see, the particular log getting appened in the log when a given workprocess trying to perform a 'WORKFLOW' related task. Both tasks SWWERRE and SWWDHEX are two reports; report SWWERRE helps in clean-up error out workflow items and report SWWDHEX helps in monitoring the deadlines of workflow items.
so please check the following
- TempSec (SP12) - consistence check -> Delete All (if systems lists any entries)
- Printer Consistence (SPAD)->Administration->Check Consistence -> Delete All (if systems lists any entries)
- SM12 for locks.- -> Delete All (if systems lists any entries)
- And also check 'SAP_REORG_JOB' running fine in the system.
You perhaps respond back if the above key tasks does not resolve the issue.
Regards
Sekhar -
Database error: TemSe- XRTAB(2)- 1 for table TST01 key [400]JOBLGX13132201X
Hi
We are getting the next erros with the jobs:
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS GZZ > retry creation JOBLGX btctlgow216#
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key [400]JOBLGX13132201X28173,1
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS GZZ > retry creation JOBLGX btctlgow216#
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key [400]JOBLGX13132201X28173,1
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS GZZ > retry creation JOBLGX btctlgow216#
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key [400]JOBLGX13132201X28173,1
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS ECF Failed to create log for job POLCASHWIN
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS EBC > Job POLCASHWIN
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS EAY Failed to read status entry for job POLCASHWIN
13:13:51 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS EBC > Job POLCASHWIN
13:24:21 PRDAUNE2_PRD_02 BTC 22 000 SAPSYS BYM SQL error 0 . Work processes in reconnect status
We make a consistency check of spool and temse but nothing is wrong, but if we apply Check Status in the SM37 some jobs change to Active and run but other are in same status Ready
We olny found the note 67055 but recommended the consistency check.
Best Regards
Reynaldo RebolledoHi Reynaldo,
Check for Tablespace PSAPTEMP size for Oracle database when job is running.
If tablespace is full try adding datafile and run the job.
Award Points if Helpful -
Database error: TemSe- XRTAB(4)- 64 for table TST01 key,
Hi all,
We are getting the following system logs regarding TEMSE,kindly suggest the solution.
=============================================================
Database error: TemSe->XRTAB(4)->64 for table TST01 key /usr/sap/RP1/SYS/global/400JOBLG/0001X00314003X87008
Database error: TemSe->&A(&B)->&C for table &D key &a
! ! ! Table name
! ! Error number
! Function number
Database access module
Possible database access modules
RTAB
Direct access with entire or partial primary key
XRTAB
direct access with entire or partial primary key for all clients
INCLUDE 'RSTS_RTAB_FUNCTIONS' OBJECT DOKU ID TX
INCLUDE 'RSTS_RTAB_ERRORS' OBJECT DOKU ID TX
INCLUDE 'RSTS_TABLES' OBJECT DOKU ID TX
=================================================================
Error in TemSe Management
Error in the C coding of the spooler.Message is no longer output.
==================================================================
Spool: RT_DELETE Reports Error 64 for Table
The RTAB interface has reported an unexpected error return code to the
spool. The RTAB function used was 'RT_DELETE'. The error number used in
the message can be translated using 'dbrtab.h' and 'dbglobal.h'.
Check whether there has been a syslog entry from the RTAB interface
before this.
===================================================================
Regards
RamHello Siobhan,
There is an inconsistency in data .Check if you are able to find an entry for SPOOL0000028682 in table TST01.
Check the OSS note 67055.
TemSe->XRTAB(4)->64 means that SAP is not able to find a key entrySPOOL0000028682 in the tableTST01 for updating records. If you dont need. Check errors in Sm13 as well for this table.
If you dont need 28682 go ahead and delete it and do a temse reorganization.
Before this do a TEMSE check using report RSTS0020.
regards.
Ruchit.
Message was edited by:
Ruchit Khushu -
Akonadi database error code: 1062 Duplicate entry for key
Since my email provider migrated their webmail platform, I keep getting an error each time kmail attempts to get emails from their imap server: could not create collection INBOX resourceid: 17
I double checked the provided imap settings have not changed and are correct : imap.laposte.net port 993 using SSL/TLS
As you can see in the pasted akonadi self-test report below, I have a few errors related to innodb, the absence of mysql tables in local/share/akonadi/db_data/ and the table performance_schema having the wrong structure. Those have been there for several months but I've been unable to fix them and I didn't care because my email was working. I suppose they are unrelated to my current issues.
Any help I can get is much welcome.
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/the_user/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-the_user.kKTLSR/mysql.socket"
ServerPath=/usr/bin/mysqld
StartServer=true
User=
Password=
[Debug]
Tracer=null
[QPSQL]
StartServer=true
Name=akonadi
Host=
User=
Password=
Port=5432
[SQLITE]
Name=akonadi
Test 2: SUCCESS
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/bin/mysqld'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
MySQL server is executable.
Details: MySQL server found: /usr/bin/mysqld Ver 10.0.14-MariaDB-log for Linux on x86_64 (MariaDB Server)
Test 5: ERROR
MySQL server log contains errors.
Details: The MySQL server error log file '<a href='/home/the_user/.local/share/akonadi/db_data/mysql.err'>/home/the_user/.local/share/akonadi/db_data/mysql.err</a>' contains errors.
File content of '/home/the_user/.local/share/akonadi/db_data/mysql.err':
141129 9:34:33 [Warning] You need to use --log-bin to make --binlog-format work.
2014-11-29 09:34:33 7f5b81d0b780 InnoDB: Warning: Using innodb_additional_mem_pool_size is DEPRECATED. This option may be removed in future releases, together with the option innodb_use_sys_malloc and with the InnoDB's internal memory allocator.
141129 9:34:33 [Note] InnoDB: Using mutexes to ref count buffer pool pages
141129 9:34:33 [Note] InnoDB: The InnoDB memory heap is disabled
141129 9:34:33 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
141129 9:34:33 [Note] InnoDB: Memory barrier is not used
141129 9:34:33 [Note] InnoDB: Compressed tables use zlib 1.2.8
141129 9:34:33 [Note] InnoDB: Using Linux native AIO
141129 9:34:33 [Note] InnoDB: Using CPU crc32 instructions
141129 9:34:33 [Note] InnoDB: Initializing buffer pool, size = 80.0M
141129 9:34:33 [Note] InnoDB: Completed initialization of buffer pool
141129 9:34:33 [Note] InnoDB: Highest supported file format is Barracuda.
141129 9:34:33 [Note] InnoDB: The log sequence numbers 66340678877 and 66340678877 in ibdata files do not match the log sequence number 66344113222 in the ib_logfiles!
141129 9:34:33 [Note] InnoDB: Database was not shutdown normally!
141129 9:34:33 [Note] InnoDB: Starting crash recovery.
141129 9:34:33 [Note] InnoDB: Reading tablespace information from the .ibd files...
141129 9:34:33 [Note] InnoDB: Restoring possible half-written data pages
141129 9:34:33 [Note] InnoDB: from the doublewrite buffer...
141129 9:34:34 [Note] InnoDB: 128 rollback segment(s) are active.
141129 9:34:34 [Note] InnoDB: Waiting for purge to start
141129 9:34:34 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.20-68.0 started; log sequence number 66344113222
141129 9:34:34 [Note] Plugin 'FEEDBACK' is disabled.
141129 9:34:34 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
141129 9:34:34 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
141129 9:34:34 [ERROR] Native table 'performance_schema'.'cond_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'host_cache' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'mutex_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'objects_summary_global_by_type' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'performance_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'rwlock_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_actors' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_consumers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_instruments' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_objects' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_index_usage' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_lock_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'threads' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_digest' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'users' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'accounts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'hosts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_connect_attrs' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_account_connect_attrs' has the wrong structure
141129 9:34:34 [Warning] Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist
141129 9:34:34 [Note] Reading of all Master_info entries succeded
141129 9:34:34 [Note] Added new Master_info '' to hash table
141129 9:34:34 [Note] /usr/bin/mysqld: ready for connections.
Version: '10.0.14-MariaDB' socket: '/tmp/akonadi-the_user.kKTLSR/mysql.socket' port: 0 MariaDB Server
2014-11-29 09:34:34 7f5b81c77700 InnoDB: Error: Table "mysql"."innodb_table_stats" not found.
141129 15:14:56 [Warning] Aborted connection 58 to db: 'akonadi' user: 'the_user' host: '' (Unknown error)
Test 6: SUCCESS
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/usr/share/config/akonadi/mysql-global.conf'>/usr/share/config/akonadi/mysql-global.conf</a>.
File content of '/usr/share/config/akonadi/mysql-global.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
Test 7: SUCCESS
MySQL server custom configuration found.
Details: The custom configuration for the MySQL server was found and is readable at <a href='/home/the_user/.config/akonadi/mysql-local.conf'>/home/the_user/.config/akonadi/mysql-local.conf</a>
File content of '/home/the_user/.config/akonadi/mysql-local.conf':
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 8: SUCCESS
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/the_user/.local/share/akonadi/mysql.conf'>/home/the_user/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/the_user/.local/share/akonadi/mysql.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 9: SUCCESS
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.13.0
Test 10: SUCCESS
Akonadi control process registered at D-Bus.
Details: The Akonadi control process is registered at D-Bus which typically indicates it is operational.
Test 11: SUCCESS
Akonadi server process registered at D-Bus.
Details: The Akonadi server process is registered at D-Bus which typically indicates it is operational.
Test 12: SKIP
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 13: SUCCESS
Resource agents found.
Details: At least one resource agent has been found.
Directory listing of '/usr/share/akonadi/agents':
akonadibalooindexingagent.desktop
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
followupreminder.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
kolabresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
migrationagent.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share:/usr/local/share'
Test 14: ERROR
Current Akonadi server error log found.
Details: The Akonadi server reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error'>/home/the_user/.local/share/akonadi/akonadiserver.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Test 15: ERROR
Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error.old'>/home/the_user/.local/share/akonadi/akonadiserver.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error.old':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Control process died, committing suicide!
Test 16: ERROR
Current Akonadi control error log found.
Details: The Akonadi control process reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error'>/home/the_user/.local/share/akonadi/akonadi_control.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!
Test 17: ERROR
Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error.old'>/home/the_user/.local/share/akonadi/akonadi_control.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error.old':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!After Upload you can delete the Duplicates comparing the employee Id.
It Will be Possible only when you use OLE and read the file records line by Line. I am not sure of the error Handling with OLE control. It may lead to some performance issues.. -
Getting strange error with connect by clause
Hi Everyone,
I have a 2 test oracle databases and each of them contain a table called department (dept_no,dept_name, main_dept_no) where each department entry is connected to main department by dept_no in the MAIN_DEPT_NO column.
The strange problem is when I execute the query on the 1 ^st^ database I get D.DEPT_NO is not available column (D.* all columns from department table) but it is there and what is more strange this query works fine on 2 ^nd^ database.
Is there any settings I have to do in the database so that it can work with connect by clause ?
SELECT SUBSTR(LPAD(' ', 4*(LEVEL)) || '· ' ||DEPT_NAME,1,50) DEPT_NAME_HY, D.*
FROM PERSONEL.DEPARTMENT D
START WITH MAIN_DEPT_NO IS NULL
CONNECT BY PRIOR DEPT_NO=MAIN_DEPT_NOThank you.SSU wrote:
Hi Everyone,
I have a 2 test oracle databases and each of them contain a table called department (dept_no,dept_name, main_dept_no) where each department entry is connected to main department by dept_no in the MAIN_DEPT_NO column. Did you mean two SCHEMAs or tow databases?
Please post DB version.
The exact error message you are getting.
output of the below from the DB rom where you are getting the error
DESC PERSONEL.DEPARTMENT -
It also says underneath "Connection was reset" "The connection to the server was reset while the page was loading." Despite doing what the articles said to do in this situation it hasn't solved it yet.
HI, and thank you for your reply. I am a bit confused however as I would have thought that once I turned off the engine of my car the transmitter and ipod would be also off???? Is there still power coming into the cigarette lighter when the car is off>????? i have a mercedes c class. The cigarette lighter is still working and the transmitter is still working. Are you saying that by leaving them still plugged in even though the car was idle and not running it still destroyed the hard drive???? Also could this happen if a person leaves it docked in a radio cd player but is not listening to it, is it still charging and could this have burned out the hard drive. (i always left it docked) until i bought the transmitter for the car.
Your thoughts would be much appreciated as obviously I do not want to make the same mistake again.
kind regards -
Error to connecting business rules for Planning application outline
Hi all,
I recently migrated database schemas from uat to prod.i configured evrything successfully.when
I loged into EAS console with user(other than admin)that user has all acces to create business rules,
I tried to create new business rule to select planning application.
I am getting this error" error connecting to essbase server<servername>:<appname>
in error details "error connecting to pllanning server<servername>:<appname>"
and "error loading objects from data source:java.sql.SQLException: [Hyperion][Oracle JDBC Driver]Object has been closed."
Please anybody help on these
regards
vashi john,
we are using hyperion planning 9.3.1.1.11 version,
we were new installatalled Production server and configured,but i did not test the business rules in production server,
next my DBA exported Oracle Dabase Schemas from UAT server to Production sever those scema names are same in UAT and Production server,so my DBA droped The Schemas in production and replaced the UAT scemas in production server,
After i manually configured the production server with Migrated scemas, in configuration i changed the server names with production sever and Database names while configuration ,Hyperion planning datasource names are same in UAT and Production ,i manually edited the server names and Database names, i configured to For EAS ,Shared Services,Planning
Everything configured sucessfully,i am able to log on to application Planning url,and refreshed everything,
But i am logon to EAS console, i tried to create the Business rule with associate Planning Application I am getting this error Connecting to essbase server<server name>:<appname>
In error details "error connecting to pllanning server,servername>:<appname.
and error loading objects from datasource:com.java.sqlexception;[hyperion][oracle jdbc driver]object has been close.
please help on these
thanking you
srini -
Invalid security certificate error when connecting from office for iPad
Hi,
I have Alfresco Community running on my NAS including the SharePoint protocol support and can access it from any desktop Microsoft Office application but when I try to "Add a Place" in any of the Microsoft Office for iPad apps I get the following
error message: "Cannot Connect to Site - The site doesn't have a valid security certificate." followed by "Cannot connect to Server - The server may be unavailable. Check your internet connection and try again".
I have the following configuration
- Qnap NAS with QTS 4.1.3
- JRE 8.6.0
- Tomcat 7.0.50
- Alfresco 5.0.c with Share and SPP installed
- Tomcat, Alfresco and Share configured for SSL on 8443 using a self-signed certificate
- SPP configured for SSL on 7070
- iPad Air 2, iOS 8.2 and latest office apps
- CA and server certificate installed on the desktop computers and the iPad
Share and SPP can be reached on the respective ports and I get the websites as expected. And as mentioned desktop MS office applications can access Alfresco via SPP. But I cannot get it to work with the iPad office apps.
Can anybody help with this, please? I know I am not running SharePoint but I assume the problem with the iPad office app is the same?
Thanks
Peter1. I can't say if it is sequential or not, I have never seen a message like that myself when doing add-on update checks - but I have seen other messages, like the update server not using a secure HTTPS address after that became a requirement for updates. <br />
Plus, I have never used anything from Conduit - ''the founder of that company has a shady past with different internet companies puling all dorts of "stuff", IMO. And all Conduit add-ons were removed and banned from the official add-ons website a few years ago because of their "antics" and major user uproar at the time - just recently have we seen a few return''.
2. Right-click individual addons and use ''Visit Homepage''' to see if that feature is being used as intended and where it takes you. Or use '''Find Update''' and see if that triggers that message, to discover which extensions are fro Conduit.
3. IMO, you are better off updating each extension one at a time with '''Find Update''', as I mentioned above. -
Error when connecting to BPC for Office
Hi experts,
We are using BPC 7.5 MS SP06. We are in the following configuration :
Windows 7 - 64bits
.Net 4.5.2
Office 2010 - 32bits
When we launch the SAP BPC for Office (Excel) we receive the following error message :
The system cannot connect to the
(HTTP://servername) Application server. Verify that you have specified a valid
Application server name, or see if the Application server is unavailable at
this time.
Automation error
The system cannot find the file specified. (Assembly: OSoftComLibClient.dll, Object:OSoft.Consumers.Common.WebServiceCall50.WebServiceCall)
We try to register the dll by running a command
%systemroot%\SysWoW64\regsvr32 <complete path to the OSoftComLibClient.dll>
without any success.
We also tried to copy the dll from another PC but it has failed the same way.
Please, be aware that we succeed in connecting with the same user from another machine with the following configuration:
Windows 7 - 32bits
Net 4.5.2
Office 2010 - 32bits
Can you help ?
Best regards,
AnneDear Roberto,
We are working on a test PC where we installed Windows 7 Enterprise - 64 bits from scratch with the .Net Framework 3.5.1 included.
The client diagnostic don't show anything wrong:
Windows System Directory:C:\Windows\system32\
Language
System default language:ENGLISH
User default language:ENGLISH
Installed Planning and Consolidation program language:ENGLISH
[Prerequisite software]
Microsoft Windows
Windows Version:
Windows Build Number:7600
Windows Service Pack:Not installed
Internet Explorer Version
Required:6.0 or higher
Currently:8.0.7600.16385
Status:OK
Microsoft Excel Version
Required:Excel 2000(9.0) or higher
Currently:Microsoft Excel 2003 higher
Status:OK
Microsoft XML Version
Required:8.10.8308.0 or higher
Currently:8.110.7600.16385
Status:OK
Microsoft .Net Framework Version
Required:2.0.50727
Status:OK
[Internet Explorer Option setting]
Proxy server
No proxy setting
Use HTTP 1.1
Required:TRUE
Currently:TRUE
Status:OK
Do not save encrypted pages to disk
Required:TRUE
Currently:FALSE
Status:Error
[Application server IIS information]
Server location: http://<servername>
Allow: OPTIONS, TRACE, GET, HEAD, POST
Server: Microsoft-IIS/7.5
Public: OPTIONS, TRACE, GET, HEAD, POST
X-Powered-By: ASP.NET
Date: Thu, 10 Jul 2014 12:04:48 GMT
Content-Length: 0
[Files]
Planning and Consolidation for Office client Folder:C:\Program Files (x86)\SAP BusinessObjects\PC_MS\
File: C:\Windows\system32\msvbvm60.dll
File Version:6.0.98.15
Status:OK
File: C:\Windows\system32\stdole2.tlb
Status:OK
File: C:\Windows\system32\scrrun.dll
File Version:5.8.7600.16385
Status:OK
File Check Result:OK
End of file
How can we go ahead ?
Thanks for your answer,
Anne
Maybe you are looking for
-
FIM Sync and SharePoint Foundation 2013
I'm looking into syncing to SharePoint via the FIM synchronisation engine, not using the FIM Portal at all. There's a connector(MA) for SharePoint but it requires UPA, User Profile Service, which isn't in the foundation version. I want to use foundat
-
Questions on Premiere CS4 4.2.1 and Media Encoder 4.2.0.006
What I am trying to do is take a single long captured file and break it into individual clip files. I know I could have used timecode based scene selection when importing to break up the clips into individual files, but the timecode was messed up a
-
I have accidentally "disconnected" from the Internet in Airport Utility. How do I reverse what I have done? I clicked on the globe and clicked where it said "connected" and now it says "disconnected" HELP!
-
Hi All, Oracle version 10.2.0 O/S Linux There are few users who are trying to connect from the application to the database. However, they are not able to connect to the db. Tracing is not enabled on the database. How can I check who are the users who
-
Create manual demand in planning book
Please, can someone tell me how to create manual demand in the interactive planning book. Thanks!!!