Database error when creating a report

Hi all,
When we are creating a report with a universe based on BW, we are getting this error message:
"A database error occurred. The database error text is: An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: 0509-022 Cannot load module /Apps/BOEXI31/bobje/enterprise120/aix_rs6000/libmda_sap.so.
0509-150 Dependent module
/Apps/BOEXI31/bobje/enterprise120/aix_rs6000/librfccm.o could not be loaded.
0509-103 The module has an invalid magic number.
0509-022 Cannot load module
/Apps/BOEXI31/bobje/enterprise120/aix_rs6000/libmda_sap.so
0509-150 Dependent module
/Apps/BOEXI31/bobje/enterprise120/aix_rs6000/libmda_sap.so could not be
loaded.. (WIS 10901)"
When I test the connection of the universe in Designer, the result is ok. Also, when I create a report on Rich Client, the report is created fine.
This is the Environment details:
BusinessObjects XI 3.1 Service Pack 3 Fix Pack 3.2 (distributed installation)
Windows Server 2008 R2 (CMS)
AIX 5.3 Level 10 (Other BO services)
Integration Kit SP3 fp 3.2 installed on both servers
Thanks,
Alvaro

Because the customer wanted the functionallity of single sign-on with Vintela. We used this guide for the installation: http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d0f6ac3c-b3ac-2b10-1b95-c9bd46194977?quicklink=index&overridelayout=true
Regards,
Alvaro

Similar Messages

Error when creating interactive report

Hi everyone,
I get the following error when creating any kind or interactive report, one might say is was a huge amount of data, however it hapens whether is is a small or big reporrt.
ORA-20001: Unable to create modules. ORA-20001: create_table error: ORA-20001: Excel load run ddl error: ORA-01658: unable to create INITIAL extent for segment in tablespace APEX_1241314296468143
I hope that I find help
best,

Hi,
This might help
http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21678/aadm_request.htm#sthref51
Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0

Database error when creating a new ADDM

Hi Guys,
In my dbconsole 10.1.0.4 i got this error when trying to create a snapshot:
Database Error
Task TASK_38223 has been created, but following error occurs during the execution time : ORA-13707: Either the start snapshot 19110 or the end snapshot 19111 is incomplete or missing
key statistics. ORA-06512: at "SYS.PRVT_ADVISOR", line 1283 ORA-06512: at "SYS.DBMS_ADVISOR",
line 190 ORA-06512: at line 1
everything else is OK.
Please advise,
Regards,
Firas

Hi,
I checked the trace files in BDUMP and found this:
Oracle process number: 13
Unix process pid: 21443, image: oracle@xxxxx (m000)
*** ACTION NAME:(Auto-Flush Slave Action) 2008-04-15 12:00:22.103
*** MODULE NAME:(MMON_SLAVE) 2008-04-15 12:00:22.103
*** SERVICE NAME:(SYS$BACKGROUND) 2008-04-15 12:00:22.103
*** SESSION ID:(156.413) 2008-04-15 12:00:22.103
*** KEWROCISTMTEXEC - encountered error:
( ORA-00001: unique constraint (SYS.WRH$_SQLTEXT_PK) violated )
*** SQLSTR: total-len=632, dump-len=240,
STR={INSERT INTO wrh$_sqltext (sql_id, dbid, sql_text, command_type, snap_id, ref_count) SELECT /*+ ord
ered use_nl(s1) index(s1) */ sie.sqlid_kewrsie, :dbid, s1.sql_fulltext, }
*** KEWRAFM1: Error=13509 encountered by kewrfteh
Please advise,
Cheers,
Firas

BI Publisher Javascript error when creating a report

Hello,
I am trying to create a report in BI Publisher and the following comes up:
Message JavaScript Error: Failed to load: io/catalog/read-report
Supplemental Detail fileName: http://<hostname>/xmlpserver/js/xdo_rel.js?cacheBuster=53
lineNumber: 1
I am stuck with this error and cannot find anything about it in the internet. I used to be able to create a Report in BI Publisher. On the other hand when I try to edit an existing report, I can do so without any issues.
Please advise. Thank you.

Ok, so...
The funny thing is that it didn't work the first time I tried to change the name of my column, and now it works !
So it's right that 2 columns can't have the same alias, I'm sorry, I'm new even with the SQL, it's a long story...
I would like to change your message to "Correct" but I can't...
Thanks Roel !

Report template error when creating new report via SAP menu

Hi everybody,
we have the following error on our system:
When trying to create a new crystal report on a SAP query, using the entry "Create new report from a SAP query" in the SAP menu an error occurs: An error ocurred while generating a new report template
The error message appears after the SAP logon and the SAP query selection.
I think this error is related to the report templates of Crystal...
Is there any default template for SAP integrated queries?
We are using Crystal Report 2008 SP2 with SAP Integration Kit.
Thanks for any helps and comments.
Sebastian

The following SAP note might help you
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333363337333633343330%7D.do]
Regards,
Raghavednra.G

Range of Object Worksheet Failed error when creating variable report

I have BO Planning version 11.6 and am running it in conjunction with Excel 2007. Every time I try to use the Report Wizard I can create a report the first time with no problems. However, when I exit out of that report and then try to create a new report using the Report Wizard I receive the following error "The following error has occurred: Error No. 1004, Method 'Range' of obejct'_Worksheet' failed". Then a report pops up with no data in it. The error keeps occuring when I try to create new reports until I exit out of Business Objects and open it up again. Then I can create 1 report with no problems.

Please post this query to the Other Business Objects Products forum:
SAP BusinessObjects BI Legacy Products
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Error when creating a Report with Form component

I am trying to create a new report with form component but when I try to choose the Table/View name I get a web error "404 web not found". I know for a fact that the list is working because I see the list when I create a "simple form". Is this a bug or i need to do something to get it working? thanks

419008,
It is a bug that has been identified and will be corrected in an HTML DB patch. There is nothing you can do to correct it.
This bug is specific to Internet Explorer and utf-8 encoding. It is not a bug with IE, it is a bug with how we handle this for IE.
Joel

Version 3.1 fault - ORA-06502 error when creating SQL Report Region/Page

I usually perfect my query in SQL*PLUS before I create a new report region.
Consequently, I copy the code into the region wizard to create the new page. However, since we have upgraded to Version 3.1, virtually every report I have tried to create has created the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
It would appear that a maximum of 960 characters can be used to create the region/page. Perversely, once the page/region has been created, I can then edit the source and include as much code as I want (so far I've not run up against a limit)
As it's just annoying, but not stopping me doing what I wanted to do, I've not got around to mentioning this error previously, but it occurred to me that I should (so I am!)
David

Hi David,
Thank you for reporting this. Unfortunately, this was a regression introduced in Application Express 3.1. The workaround is to edit the region, as you suggested. This has been filed as Bug 6956070 and will be corrected in the forthcoming Application Express 3.1.1 patch set.
Joel

Database error when creating a web app instance

I'm trying to setup Project 2013 on SharePoint 2013 and am at the point where you create a Project web app instance. I'm on step 3 on this page.
http://alinimer.com/2013/02/28/install-configure-and-deploy-project-server-2013-part-4/
I'm getting an error saying "Provisioning Failed - see the Application event Log." In the event log it says
Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision database.
Database provisioning failed. The database ProjectWebApp contains a non project schema and cannot be used. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: Database provisioning failed. The database ProjectWebApp contains a
non project schema and cannot be used.
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProjectServiceDatabase(ProjectProvisionSettings provset, String collation, ProjectDatabaseStateType& originalDatabaseState)
   --- End of inner exception stack trace ---
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProjectServiceDatabase(ProjectProvisionSettings provset, String collation, ProjectDatabaseStateType& originalDatabaseState)
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
I'm new to Project Server and fairly new to SharePoint so is this something that's easy to fix? The database was created new for Project.
Free computer help and tips http://www.onlinecomputertips.com

Looking at the code, it flags this if the database specified is not empty. Can you validate that the database is either new or does not have any tables, views, sprocs, etc?
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Smart View internal metadata error when creating SmartView reports

Hi all,
I have a really strange problem when trying to use HsGetValue -functions in Smart View (in Excel 2010).
The thing is that I can create a lot of formulas for a sheet that have links to other sheets. However, in some pont (I don't exactly when it happens), I quite randomly get an error in Excel saying "This workbook contains Smart View internal metadata that needs to be repaired. This will automatically be repaired but may take some time". This error box appears a few times, I just click it and then it disappears. Obviously, this is annoying and the Excel is unusable.
Usually it happens when I try to format the sheet or add, e.g., company logo into the sheet, or try to do a bit more difficult linking of the cells.
Any ideas what is going on here? Smart View version is 11.1.2.1.103 (Build 100).
Thanks in advance!

Please take a look at KB ID 1432526.1. I've copied the text below.
Applies to:
Hyperion Financial Management - Version: 11.1.2.1.102 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
The following message is displayed when opening the Smart View files:
This workbook contains Smart View internal metadata that needs to be repaired. This will automatically be repaired but may take some time.
It may take a long time to open or save the Smart View templates.
Changes
Smart View has been installed by a user different, than the one that is currently logged on the workstation, i.e. service account or installation account.
Cause
When the user accesses Smart View for the first time, on a workstation where the SmartView has been installed by another user, the following registry key will be missing in the user's profile:
HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"UseStorageCompression"=hex:01
"SelectedOptionTab"=hex:02
If SmartView is installed by a different user i.e. service account or installation account, then the user profile registry will be missing "UseStorageCompression" and "SelectedOptionTab", resulting in a incorrect saving of file metadata.
Solution
Follow the steps below to automatically create the required registry keys for the current user profile:
1.Open Excel and select Smart View menu.
2.Click the "Options" icon to open the Options window.
3.In the "Advanced" tab, under the "Compatibility" section make sure the "Reduce Excel File Size" option is selected and click OK.
4.The following Windows Registry keys will be created under user profile, enabling proper compression of the metadata:
[HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"UseStorageCompression"=hex:01
"SelectedOptionTab"=hex:025.Now the user should be able to open the smartview template without the error message.
6.Additionally it is also recommended to select the "Improve Metadata Storage" option in the Smart View Options window which will create the following registry key:
[HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"IgnoreShapes"=hex:01

Performance issues when creating a Report / Query in Discoverer

Hi forum,
Hope you are can help, it involves a performance issues when creating a Report / Query.
I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = Posted we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
Please see attached the SQL Inspector Plan:
Before Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
AND-EQUAL
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_N1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
After Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
TABLE ACCESS FULL GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
Many thanks,
Lance

Hi Rod,
I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
Ive been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
I think the problem is with the column using DECODE. When querying the column in TOAD the value of P is returned. But in discoverer the condition is done on the value Posted. Im not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
Lance
DECODE( JOURNAL_BATCH1.STATUS,
'+', 'Unable to validate or create CTA',
'+*', 'Was unable to validate or create CTA',
'-','Invalid or inactive rounding differences account in journal entry',
'-*', 'Modified invalid or inactive rounding differences account in journal entry',
'<', 'Showing sequence assignment failure',
'<*', 'Was showing sequence assignment failure',
'>', 'Showing cutoff rule violation',
'>*', 'Was showing cutoff rule violation',
'A', 'Journal batch failed funds reservation',
'A*', 'Journal batch previously failed funds reservation',
'AU', 'Showing batch with unopened period',
'B', 'Showing batch control total violation',
'B*', 'Was showing batch control total violation',
'BF', 'Showing batch with frozen or inactive budget',
'BU', 'Showing batch with unopened budget year',
'C', 'Showing unopened reporting period',
'C*', 'Was showing unopened reporting period',
'D', 'Selected for posting to an unopened period',
'D*', 'Was selected for posting to an unopened period',
'E', 'Showing no journal entries for this batch',
'E*', 'Was showing no journal entries for this batch',
'EU', 'Showing batch with unopened encumbrance year',
'F', 'Showing unopened reporting encumbrance year',
'F*', 'Was showing unopened reporting encumbrance year',
'G', 'Showing journal entry with invalid or inactive suspense account',
'G*', 'Was showing journal entry with invalid or inactive suspense account',
'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
'I', 'In the process of being posted',
'J', 'Showing journal control total violation',
'J*', 'Was showing journal control total violation',
'K', 'Showing unbalanced intercompany journal entry',
'K*', 'Was showing unbalanced intercompany journal entry',
'L', 'Showing unbalanced journal entry by account category',
'L*', 'Was showing unbalanced journal entry by account category',
'M', 'Showing multiple problems preventing posting of batch',
'M*', 'Was showing multiple problems preventing posting of batch',
'N', 'Journal produced error during intercompany balance processing',
'N*', 'Journal produced error during intercompany balance processing',
'O', 'Unable to convert amounts into reporting currency',
'O*', 'Was unable to convert amounts into reporting currency',
'P', 'Posted',
'Q', 'Showing untaxed journal entry',
'Q*', 'Was showing untaxed journal entry',
'R', 'Showing unbalanced encumbrance entry without reserve account',
'R*', 'Was showing unbalanced encumbrance entry without reserve account',
'S', 'Already selected for posting',
'T', 'Showing invalid period and conversion information for this batch',
'T*', 'Was showing invalid period and conversion information for this batch',
'U', 'Unposted',
'V', 'Journal batch is unapproved',
'V*', 'Journal batch was unapproved',
'W', 'Showing an encumbrance journal entry with no encumbrance type',
'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
'X', 'Showing an unbalanced journal entry but suspense not allowed',
'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
'Z', 'Showing invalid journal entry lines or no journal entry lines',
'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),

Error when running a report in BPC NW

I am getting the following error when running a report for my application in BPC NW.
EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could not make much out of it.
Appreciate any assistance.

Sanjay,
This is a very generic error...Couple of places to look for....
1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
3)Create a "evdataserver_debug.txt" in user's private publication folder on server side to populate very detail level logging and check the log on client side EVDRE_LOG.txt for further peek into where things are getting messed up.
if evdataserver_debug.txt does not get populated on BPC 5.x...it is an issue with IIS authetication on Application server.
4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
BPC\Logging for further details ..
Hope this helps..
Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Invalid Year error when refreshing the report with date prompt

Hi All,
I am working on BO XI 3.1 with Informix database.
When refreshing the report without any date prompt the report is running fine,but when applying the date prompt it is giving the error message
"Invalid year in the date".
I have tried changing the value in the advance tab of the object property to 'yyyy-mm-dd hh:mm:ss'
But it also din't work for me.
Please suggest.
Thanks and Regards,
Rishabh

Hi Experts,
Thanks for your suggestions.
Since changing the PRM file was not a fesiable solution for us.
We have manged to find a work around to solve this issue
We have created the filters at universe level with following formula for all the date objects which we ere using at report level as a prompt:
@Select(classname\objectname)=TO_DATE(@Prompt('Enter Date:','D',,mono,free,not_persistent), '%Y/%m/%d')
Although when we parse this formula it wil give an error message saying 'illigle operation',
still it will work when we use this at report level.
Thanks and Regards,
Rishabh

Error in creating expense report

Hi All,
We are getting an error when creating travel expense reports via ESS. Upon clicking Save, wwe get the following error msg:
java.lang.NullPointerException
at com.sap.xss.ser.xssconfview.vc.VcLinksView.wdDoModifyView(VcLinksView.java:167)
at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksView.wdDoModifyView(InternalVcLinksView.java:354)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:488)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
However, in the backend when we check transaction PR05, the trip has been created and updated (despite the error msg on portal). From this, we can conclude that atleast JCo connections are working fine.
Any clues from the gurus out there on how to troubleshoot this? Thanx a ton!
cheers
Prachi

Hi Markus,
here you go...
java.lang.NullPointerException
     at com.sap.xss.ser.xssconfview.vc.VcLinksView.wdDoModifyView(VcLinksView.java:167)
     at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksView.wdDoModifyView(InternalVcLinksView.java:354)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:488)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:779)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:714)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:69)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1259)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:324)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:830)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
thanks!

Database error when creating a report

Similar Messages

Maybe you are looking for