Database Error when refreshing planning.

hi frnds please help me with this issue,
I added a few new members. They are dynamic calc with member formulas. It appears only one of the members is causing an error. I am not sure what I have done incorrectly on this one member. It appears to be set up exactly as the others.
error message in planinng desktop is ---- > *(COR , 5) member cannot be set to specified data storage attribute. Level zero dynamic members must have an associated member formaula.*
thanks,
ricky..

Hi,
The error message is pretty much explaining the problem, one of the bottom level members you have created or changed is set to be dynamic calc but it does not have a formula associated with it.
Try deleting the member,refresh and then adding it again as dynamic calc and just put a semi colon ; as the formula, refresh, then try adding the formula in again.
Good Luck
John
http://john-goodwin.blogspot.com/

Similar Messages

Error when Refresh Planning after adding attribute V9.2.1

Has anyone encountered this and what is the solution:
Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
Career is the dimension and Decanatura is the attribute added
Using 9.2.1
Thanks
Jeff

Hi Jeff,
please find some findings from planning DBAG which may be useful to resolve your issue:
You can assign attributes only to sparse dimensions.
You cannot assign attributes to label-only members.
After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
You must assign attribute values to dimension members at the same member level within a dimension.
You can define attribute values for Entity, user-defined custom dimensions, and Account
members if the Account dimension is designated as a sparse dimension in all plan types. You
can then assign attribute values to members of a dimension.
Attribute values for an attribute must be assigned to the same-level sparse dimension members.
Assigning an attribute value to another level causes an error during the application refresh.
hope this helps.
www.dornakal.blogspot.com
Edited by: Dornakal on May 28, 2009 5:55 AM

Database error whn refreshing planning.

hi frnds please help me with this issue,
I added a few new members. They are dynamic calc with member formulas. It appears only one of the members is causing an error. I am not sure what I have done incorrectly on this one member. It appears to be set up exactly as the others.
error message in planinng desktop is ---- > (COR , 5) member cannot be set to specified data storage attribute. Level zero dynamic members must have an associated member formaula.
thanks,
ricky..

Hi,
The error message is pretty much explaining the problem, one of the bottom level members you have created or changed is set to be dynamic calc but it does not have a formula associated with it.
Try deleting the member,refresh and then adding it again as dynamic calc and just put a semi colon ; as the formula, refresh, then try adding the formula in again.
Cheers
John
http://john-goodwin.blogspot.com

Invalid Year error when refreshing the report with date prompt

Hi All,
I am working on BO XI 3.1 with Informix database.
When refreshing the report without any date prompt the report is running fine,but when applying the date prompt it is giving the error message
"Invalid year in the date".
I have tried changing the value in the advance tab of the object property to 'yyyy-mm-dd hh:mm:ss'
But it also din't work for me.
Please suggest.
Thanks and Regards,
Rishabh

Hi Experts,
Thanks for your suggestions.
Since changing the PRM file was not a fesiable solution for us.
We have manged to find a work around to solve this issue
We have created the filters at universe level with following formula for all the date objects which we ere using at report level as a prompt:
@Select(classname\objectname)=TO_DATE(@Prompt('Enter Date:','D',,mono,free,not_persistent), '%Y/%m/%d')
Although when we parse this formula it wil give an error message saying 'illigle operation',
still it will work when we use this at report level.
Thanks and Regards,
Rishabh

JCS-122017 Error When refreshing Application List

JCS-122017 Error When refreshing Application List
This issue started occurring when we migrated CPS from M28 to M33
We currently have M33.45 in Dev and are still experiencing the same error when refreshing the application list.
To replicate the issue, I can login, click applications, click the redwood folder, then click the refresh button within CPS and receive the below error.
[Errors found]      11:35:27 AM: JCS-122017: Trying to use non-attached object Application:2,472
Has anyone else had this issue, this appears to happen to all of the application lists when refreshing
JCS-122017: Trying to use non-attached object Application:2,472
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkHasSession(BaseSchedulerEntityImpl.java:853)
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkCanRead(BaseSchedulerEntityImpl.java:859)
     at com.redwood.scheduler.model.NamedRootObjectImpl.getName(NamedRootObjectImpl.java:143)
     at com.redwood.scheduler.ui.meta.page.MetaOverviewPage.getTabName(MetaOverviewPage.java:227)
     at com.redwood.scheduler.ui.meta.page.MetaTabPage.setTabPageNameType(MetaTabPage.java:94)
     at com.redwood.scheduler.ui.meta.MetaTabPageSetNameAction.performModelAction(MetaTabPageSetNameAction.java:49)
     at com.redwood.scheduler.ui.meta.MetaModelAction$ModelActionImpl.performModelAction(MetaModelAction.java:62)
     at com.redwood.scheduler.ui.model.impl.FormImpl.modelActions(FormImpl.java:730)
     at com.redwood.scheduler.ui.model.impl.LifeCycle.run(LifeCycle.java:226)
     at com.redwood.scheduler.ui.servlet.Servlet.handleRequest(Servlet.java:98)
     at com.redwood.scheduler.ui.servlet.Servlet.doPost(Servlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.redwood.scheduler.module.impl.ModuleFilter.doFilter(ModuleFilter.java:157)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.security.filter.SecurityFilter.doFilter(SecurityFilter.java:613)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.servlet.RequestCharsetFilter.doFilter(RequestCharsetFilter.java:197)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The error is in the admin guide
No timezone could be found to calculate this TimeWindowElement. This means
that the object that includes the TimeWindow should set the TimeZone to use
for the calculation of the TimeWindow, or a TimeZone must be set on the
TimeWindow or TimeWindowElement.
I do not see how this would occur within the application list.
Thanks,
Edited by: Nick Katsoulis on Jan 17, 2012 6:39 PM

Hi Nick,
I think you have already received this info via OSS - In case anyone else encounters this same problem - This issue will be fixed in a future version of CPS, planned for the M33-April release.
David

P3 Project Manager Crashing with EBDClient error, when refreshing (F5)

My company has 3 sql databases for Prima on a server; 2 are approximately 1.5GB, and the third is just over 2GB
We have 5 client machines (xp sp3 32bit), that use the following setup:
P3 Project Manager version 5 (no service packs installed, but have tried sp1-3 on my machine with the same error)
oracle client 9.2 with tnsnames pointing to the sql server with the prima databases
each machine has 2GB memory with a 3-4GB pagefile
I do not have issues refreshing the other smaller databases.
both the client and server do not take a significant hit on resources while refreshing.
both the server and client are not reporting any errors under event viewer.
they all receive the following error when refreshing (F5) while logged in the third and largest database:
Message (Tab)
Application exception
type: EDBClient
Event code: IMFTO-3501-8
Description: Insufficient memory for this operation
Context (tab)
app title: primavera project management
exe: pm.exe
object: tmainmenu
context:
     1. tfrmmain.refreshVDBengine
     2. tfrmmain.actrefreshExecute
     3. tfrmmain.actProjectActivitiesExecute
     4. tfrmmain.actProjectsExecute
     5. tfrmmain.actProjectsActivitiesExecute
     6. tfrmmain.actProjectWBSExecute
     7. tfrmmain.actProjectActivitiesExecute
Evironment (tab)
Components
=============
ORI: ORI Win32 #
ORI/DB: PMDB,0500.0024.0001.0002
IMG: IMG win32 #1000
SYS INFO
=============
username: "user's name" Hostname: "their computer name"
OS version:     winNT 5.1, build 2600, SP3

...\OracleBI\web\catalogmanager\catalogmanager.ini
-vmargs
-Xmx1024M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true
amend---------------------------------------------------------
-vmargs
-Xmx512M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Error when refreshing web intelligence document less then every minute

Hi all,
I get the following error, when refreshing document via javascript more often then every minute:
Server Error in '/Dashboard' Application.
FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: BusinessObjects.Enterprise.OcaFramework.ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Source Error:
Line 121:
Line 122:                    //Session["StorageToken" + strDocId] = doc.StorageToken;
Line 123:               doc = reportEngine.OpenDocument(intDocID);
Line 124:               //doc = reportEngine.GetDocumentFromStorageToken(storageToken);
Line 125:               doc.Refresh();
Source File: c:\inetpub\wwwroot\dashboard\document.aspx.cs    Line: 123
Stack Trace:
[ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
   at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA._WICDZProxy.initInstance(Byte[] p0, UTF8StringHolder p1)
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
[CommunicationException: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
   BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.InitInstance(String clientInfo)
   BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
   BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.OpenDocument(Int32 documentId)
   Dashboard.document.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\dashboard\document.aspx.cs:123
   System.Web.UI.Control.OnLoad(EventArgs e)
   System.Web.UI.Control.LoadRecursive()
   System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407
I searched forum and google for this error, but I didn't find anything. Did you heard of this error? How can I fix it?
My BO Version is BusinessObjects Enterprise XI (without any ServicePacks). Is there a SP which fix this error?
Thank you for every idea!!!

Hi,
Copy File from Client system to server in same folder location .
Make sure in Edit Query option Editable & Refreshable options are checked .
Please check the links below .
Webi Excel Personal Data Provider Dynamic Data
How to create a webi report using excel as source
Excel as datasource in Infoview
Excel source located in Infoview

Error when refreshing workbook in BEx: Specific Macro CallBack not found

One of our users is getting the following error when refreshing any BEx workbook (in BI7):
Problems while calling the exit on refresh: Specified Macro 'CallBack' is not found in the workbook
This error suddenly started this week, everything was fine before that, and no changes have been made to the user's PC. The problem is specific to this one user's PC.
Any ideas?
-Jason

Hi,
It seems a common error.
There is a note that mentions the error, and was fixed since BI addons SP 8
Note: 1267942 - Custom macro not being executed on a workbook
Download and test the latest version: bi710sp12_1200-10004472.exe
This should fix the issue.
FYI: SAPGUI 640 is not supported by SAP since 2008. If you are using this version, please download the SAPGUI 7.10 as well.
Thanks
Edward John

Database error when updating table ADRC

Hi,
We are on ECC 5.0 & are facing a problem whille maintaining anything relevant to table ADRC.
For eg., if we try to maintain storage location or create a vendor code (XK01), for some inputs it works ...but most times the update just terminates with a message "Database error when changing table ADRC".
Pls. help.
Thanks,
Saba.

Hi
You can refer to following SAP Notes in case they help:
385440   Repairing inconsistencies in Customizing addresses
417809    Customizing objects display incorrect addresses
186910    Customers / vendors with incorrect address
Otherwise i want to know more about the error you are getting to help you in better way.
Thanks and Regards
Esha Rajpal

Error when refresh security filter in Planning 11.1.1.3

Dear All,
I found a error when I refresh securty filter in planning.
The error is related to the user who deleted in Microsoft Active Directory.
The shared service cannot find the user. How can I solve the error?
Regards

Have a read of this post :- Removing 'msad' strings for invalid users in Planning as it covers the same area.
Cheers
John
http://john-goodwin.blogspot.com/

Getting error when refreshing the WebI report

Hi,
I am building WebI reports using a universe which is constructed over a BI cube.
Initially I am building the report and uploading it into CMS.
When I am importing the report from CMS and refreshing it, I am getting an error
"A database error has occured. The database error text is: A runtime exception has occured. (Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
What could be the reason for this kind of behaviour?
The version of BO is 3.1.

Hi,
Your answer was really helpful, and it worked upto some extent. I have updated the lisence key and the following error is no longer coming.
"(Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
But now I have a new error popping up when ever I import a report from CMS and refreshing it.
The error is "A database error occured. The database text is: The supplied XML is not valid.[SYMTNKEY].[LEVEL 01]. (WIS 10901)."

Database error when trying to view Crystal Report from InfoView

I am receiving the following error when I try to view or run a Crystal Report from the InfoView. The report is based on an SAP InfoSet.
"Failed to load database information."
The report data can be refreshed with no trouble from within the Crystal Reports designer on my local machine, but the error occurs after it is published to the InfoView. The same error appears when trying to import into Excel using LiveOffice.
Server details:
-Edge 3.1
-Windows 2003 64-bit
-SAP Integration kit installed
Local Crystal Reports machine details:
-Windows XP
-SAP Integration kit installed
-Crystal Reports 2008
My steps to troubleshoot so far:
-Checked Database Logon details in CMC for the report. Username and password are entered correctly.
-Cycled all CrystalReports background services off and on again from the CMC
-Rebooted server
Have I missed anything? Any help would be appreciated.

Hi,
do you have any connectivity from your EDGE to the SAP System ? Like can you import roles or run a WebI ?
Regards
-Seb.

Database Error while refreshing webi report

Hi,
I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
Regards,
PRK

Hi Praveen,
As you are getting error 'IES10901' it is related to database connection issue.
Find below link it might help you.
Database error in Web I ( BO 4.0)
check your universe connections to DB(ODBC connections).
Regards,
Samatha B.

Database error when creating a new ADDM

Hi Guys,
In my dbconsole 10.1.0.4 i got this error when trying to create a snapshot:
Database Error
Task TASK_38223 has been created, but following error occurs during the execution time : ORA-13707: Either the start snapshot 19110 or the end snapshot 19111 is incomplete or missing
key statistics. ORA-06512: at "SYS.PRVT_ADVISOR", line 1283 ORA-06512: at "SYS.DBMS_ADVISOR",
line 190 ORA-06512: at line 1
everything else is OK.
Please advise,
Regards,
Firas

Hi,
I checked the trace files in BDUMP and found this:
Oracle process number: 13
Unix process pid: 21443, image: oracle@xxxxx (m000)
*** ACTION NAME:(Auto-Flush Slave Action) 2008-04-15 12:00:22.103
*** MODULE NAME:(MMON_SLAVE) 2008-04-15 12:00:22.103
*** SERVICE NAME:(SYS$BACKGROUND) 2008-04-15 12:00:22.103
*** SESSION ID:(156.413) 2008-04-15 12:00:22.103
*** KEWROCISTMTEXEC - encountered error:
( ORA-00001: unique constraint (SYS.WRH$_SQLTEXT_PK) violated )
*** SQLSTR: total-len=632, dump-len=240,
STR={INSERT INTO wrh$_sqltext (sql_id, dbid, sql_text, command_type, snap_id, ref_count) SELECT /*+ ord
ered use_nl(s1) index(s1) */ sie.sqlid_kewrsie, :dbid, s1.sql_fulltext, }
*** KEWRAFM1: Error=13509 encountered by kewrfteh
Please advise,
Cheers,
Firas

Database Error when refreshing planning.

Similar Messages

Maybe you are looking for