Database error whn refreshing planning.

hi frnds please help me with this issue,
I added a few new members. They are dynamic calc with member formulas. It appears only one of the members is causing an error. I am not sure what I have done incorrectly on this one member. It appears to be set up exactly as the others.
error message in planinng desktop is ---- > (COR , 5) member cannot be set to specified data storage attribute. Level zero dynamic members must have an associated member formaula.
thanks,
ricky..

Hi,
The error message is pretty much explaining the problem, one of the bottom level members you have created or changed is set to be dynamic calc but it does not have a formula associated with it.
Try deleting the member,refresh and then adding it again as dynamic calc and just put a semi colon ; as the formula, refresh, then try adding the formula in again.
Cheers
John
http://john-goodwin.blogspot.com

Similar Messages

Database Error when refreshing planning.

hi frnds please help me with this issue,
I added a few new members. They are dynamic calc with member formulas. It appears only one of the members is causing an error. I am not sure what I have done incorrectly on this one member. It appears to be set up exactly as the others.
error message in planinng desktop is ---- > *(COR , 5) member cannot be set to specified data storage attribute. Level zero dynamic members must have an associated member formaula.*
thanks,
ricky..

Hi,
The error message is pretty much explaining the problem, one of the bottom level members you have created or changed is set to be dynamic calc but it does not have a formula associated with it.
Try deleting the member,refresh and then adding it again as dynamic calc and just put a semi colon ; as the formula, refresh, then try adding the formula in again.
Good Luck
John
http://john-goodwin.blogspot.com/

Database Error while refreshing webi report

Hi,
I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
Regards,
PRK

Hi Praveen,
As you are getting error 'IES10901' it is related to database connection issue.
Find below link it might help you.
Database error in Web I ( BO 4.0)
check your universe connections to DB(ODBC connections).
Regards,
Samatha B.

Error when Refresh Planning after adding attribute V9.2.1

Has anyone encountered this and what is the solution:
Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
Career is the dimension and Decanatura is the attribute added
Using 9.2.1
Thanks
Jeff

Hi Jeff,
please find some findings from planning DBAG which may be useful to resolve your issue:
You can assign attributes only to sparse dimensions.
You cannot assign attributes to label-only members.
After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
You must assign attribute values to dimension members at the same member level within a dimension.
You can define attribute values for Entity, user-defined custom dimensions, and Account
members if the Account dimension is designated as a sparse dimension in all plan types. You
can then assign attribute values to members of a dimension.
Attribute values for an attribute must be assigned to the same-level sparse dimension members.
Assigning an attribute value to another level causes an error during the application refresh.
hope this helps.
www.dornakal.blogspot.com
Edited by: Dornakal on May 28, 2009 5:55 AM

Hyperion Planning migration error while refreshing/creating Essbase cube

Hi,
I'm migrating a Hyperion Planning application (11.1.1.4) to a complete other environment (due to the split of the companies). I have read most post on otn, but unfortunately nothing that helped me to solve the issue, yet... I hope someone can help me. Thanks in advance!
I have executed the following steps:
1. Create a new Oracle database
2. Create a datasource to the Oracle database and to Essbase (both tested succesfully)
3. Create a fresh planning application (I have used a native Admin account and not the original owner)
4. Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
5. Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created - I did not do this since I could not delete this value. null is not accepted.
6. Stop Planning
7. Restore the planning application database over the one created in the first step (I had to drop the existing tables first)
8. Go into the HSP_USERS table and update the SID for user id 50001
9. Start planning
10. Log on to planning and I did see the webforms, etc as expected.
11. Now, when I try to refresh the database, I receive an error:
Cube refresh/create in progress
Status failed
Step 4 Adding dimensions
java.lang.NoSuchMethodError: getAttributeType
Does anyone has an idea? Hope someone can help me since the deadline is getting closer and closer.
Thanks!
Kind Regards
Martin

Hi John,
Thanks for your reply.
I have exactly done what you have described. I droped the schema and recreated it with an impdp to import.
But, in the meantime I have been investigating the dimensions and there's indeed something very wrong. Some dimensions have been mixed up. In the 'old' environment I have 10 stored dimensions and 4 attribute dimensions (as well as in EAS as in Planning, offcourse as you expect). In the 'new' environment, two stored dimensions have been mixed up with two attribute dimensions.... How is that possible?
I have never seen that. Could this be caused by the reason that we use a different version of Oracle (11G release 2 vs 10G (10.2.0.4))? Or went something wrong with exporting the schema...? Can you tell me what I can do to investigate this?
Thanks!
Kind Regards,
Martin

Error : database is being refreshed

I am getting this error:
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed....when I try to do anything to the system.
I think the application is stuck in this mode because I tried to refresh it yesterday and the system crashed while it was being refreshed. It has since been rebooted but I'm still getting the error. The whole problem goes back to trying to delete an Enity member. I got the warning that all data and planning units would be deleted...etc., but I want to delete it anyway. I then tried to refresh and it crashed the system. Any ideas?

Hi,
The application is probably locked you can use HspUnlockApp utility to unlock the application, it is in the \planning\bin directory
Cheers
John
http://john-goodwin.blogspot.com/

Com.hyperion.planning.olap.EssbaseException (1060122) Error during refresh

Hello,
We recently upgraded our Hyperion environment from 9.3.1 to 9.3.3 and we are getting this error
com.hyperion.planning.olap.EssbaseException (1060122) when trying to refresh a database. What does this error mean? Any help in this regard is greatly appreciated.
Thanks
Sri

The error stands for :-
1060122 - Name [%s] too long for Non-Unicode mode server
Not sure why you are getting the error though.
Cheers
John
http://john-goodwin.blogspot.com/

Error refreshing Planning

Hi , I got this error when refreshing :
com.hyperion.planning.olap.EssbaseException: Account (1060000)
I search in essbase error documentation , over internet , in oracle support but I never find a way to solve this problem ....
can anyone help giving a suggestion or a solution ?
Thanks
Edited by: 911660 on Oct 1, 2012 8:40 AM

When I look at the app logs when I try to refresh I got this messages :
[Mon Oct 1 17:05:11 2012]Local/ACASECNA///Info(1013210)
User [admin] set active on database [Bud]
[Mon Oct 1 17:05:11 2012]Local/ACASECNA/Bud/admin/Info(1013091)
Received Command [Create location alias] from user [admin]
[Mon Oct 1 17:05:11 2012]Local/ACASECNA/Bud/admin/Error(1023069)
Location alias PnlCube already exists
[Mon Oct 1 17:05:11 2012]Local/ACASECNA/Bud/admin/Warning(1080014)
Transaction [ 0x10009( 0x5069cd47.0x965e1 ) ] aborted due to status [1023069].
[Mon Oct 1 17:05:11 2012]Local/ACASECNA/Bud/admin/Info(1013091)
Received Command [Create location alias] from user [admin]
[Mon Oct 1 17:05:11 2012]Local/ACASECNA/Bud/admin/Error(1023069)
Location alias BsCube already exists
[Mon Oct 1 17:05:11 2012]Local/ACASECNA/Bud/admin/Warning(1080014)
Transaction [ 0x1000a( 0x5069cd47.0x967b7 ) ] aborted due to status [1023069].
[Mon Oct 1 17:05:13 2012]Local/ACASECNA///Info(1013214)
Clear Active on User [admin] Instance [1]

While Refresh the report in webi i got database error.

Hi All,
I try to refresh the report in CMC i got database error . Can any one please help me how to resolve this.
Regards,
Arjun

Hi Mallikarujun,
Try selecting the values using show values for particular column in Universe.
If that is fine and you are using SQL Server then the query is returning more that 2147483647 which is the limit for the return count by SQL Server (4 Bytes).
There may be issue in join condition, if not try applying filter in query

Database error: Error in MDDataSetBW.GetCellData. Error executing physical plan: AttributeEngine: no 6952. (IES 10901)

Hi All,
I'm getting below error when running a webi report in 4.1.
Could you please let me know why and what to do for this error?
Also let me know if any more info required.
Error Message:
Database error: Error in MDDataSetBW.GetCellData. Error executing physical plan: AttributeEngine: no 6952. (IES 10901)
Thanks & Regards,
Karthick.

Are you seeing this error for every report? or just for this report? Looks like it is DB error. Contact your DBAs

Interactive reporting : error while refreshing MSSQL data in Workspace

Hi all,
I recently work with Hyperion and I am facing an issue that makes me crazy.
My configuration is simple :
- 1 win2003 server with Hyperion Interactive Reporting services and workspace installed (both works properly)
- 1 winXP machine with MS Sql Server 2005
- My dev PC an winXP with IR studio.
I created an IR report with a MSSQL query that retrieves data into a Table.
The report is displayed properly and the data is OK.
When I refresh the data in IR studio, everything is OK.
I import the OCE file into the the workspace, following by the BQY file.
The report is displayed properly in workspace with the correct data.
I change the data in the MSSQL server and I try to refresh the report in the workspace.
So, I open the report in the workspace and I click on the refresh button.
But when I do that, I get an error message.
I read somewhere that we have to configure the DAS.
I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
But when I try to add a new connection, I have only 4 choices for the type of database : Essabse, Financial Management, Planning and SAP BW.... No MSSQL Server.
I hope that anyone among you can help me, but anyway, thanks for reading my post.

You need to enter DATABASE details in DAS (Data Access Services) by running Service Configurator.
Then run Remote and Local Service configurator to enter database details.
##I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
This is something related to Financial Reporting.
Hope this helps.
Regards,
Manmohan Sharma

Cannot complete your request because the database is being refreshed

I created provisioned one user in Shared Services and then assigned to a group. After this I went to workspace in advance mode in order to manage security filters, the user does not appear and when I try to "create" an existing user, an error appears: Cannot complete your request because the database is being refreshed
I'm not running any refresh in the database and my EAS does not show anything. What could be happening? It is Hyperion Planning 11.1.1.3
Regards,

Than you John,
I executed the cmd and this appeared after entering the password, I understand that the application has been unlocked, doesn't it?
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
D:\Hyperion\common\config\9.5.0.0\product\planning\9.5.0.0\planning_1.xml
displayName = Planning
componentTypes =
priority = 50
version = 9.5.0.0
build = 1
location = D:\Hyperion\products\Planning
taskSequence =
task =
*******D:\Hyperion\common\config\9.5.0.0\registry.properties
using Java property for Hyperion Home D:\Hyperion
Setting Arbor path to: D:\Hyperion\common\EssbaseRTC\9.5.0.0
Setting HBR Mode to: 2
=2013-11-06 11:07:30,926 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Er
ror retrieving user by identity
d{ISO8601} WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving
user by identity
Embedded HBR initialized.
d{ISO8601} INFO main com.hyperion.audit.client.runtime.AuditRuntime - Audit Clie
nt has been created for the server http://stlwlahyapprd01.na.ds.monsanto.com:280
80/interop/Audit
Reaquired task list lease: Wed Nov 06 11:07:31 CST 2013: 1383757651285
The application has been successfully unlocked
d{ISO8601} INFO pinging com.hyperion.audit.client.cache.AuditConfigFilter - Clie
nt Enable Status false
d{ISO8601} INFO Thread-22 com.hyperion.audit.client.cache.AuditConfigFilter - Cl
ient Enable Status false
d{ISO8601} INFO filterConfig com.hyperion.audit.client.cache.AuditConfigFilter -
Client Enable Status false

Unable to refresh planning

Hi
I recently did a planning database migration from QA to production.
when I tried to refresh database from planning web application I am getting following error in refresh:
*"com.hyperion.planning.olap.EssbaseException (1006068)"*
can anyone suggest me how I can resolve this issue.
Thanks in advance.

Hi,
I think the error relates to an invalid block header, so it might be an issue on the essbase data side.
Is there anything in the essbase logs like :-
Invalid transaction status for block...
Also I would try giving the validate function in maxl a go to see if it comes up with any issues.
Cheers
John
http://john-goodwin.blogspot.com/

BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD.

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Database error whn refreshing planning.

Similar Messages

Maybe you are looking for