Database file 1 failed verification check on standby

Hi ,
i m getting a trouble on my physical standby database(Oracle 10g Enterprise edition).
I have taken standby controlfile backup from production . And Restored it on Standby database then i m getting following errors :
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: 'E:\ORACLE\PRODUCT\ORADATA\TESTDR\SYSTEM01.DBF'
ORA-01206: file is not part of this database - wrong database id
My production aND standby database ID are same :
Edited by: user12045405 on Nov 6, 2012 11:16 AM

Check this
http://oracleinstance.blogspot.in/2010/08/ora-01122-ora-01110-ora-01206-after.html

Similar Messages

  • ORA-01122: database file 58 failed verification check

    Hi All,
    I have lost one of my datafile while moving them from 1 drive to another. I am getting the following error while trying to start the database:
    ORA-01122: database file 58 failed verification check
    ORA-01110: data file 58: 'G:\ORACLE\R3E\SAPDATA7\R3E700_25\R3E700.DATA25'
    ORA-01251: Unknown File Header Version read for file number 58
    Please suggest what can be done to correct the error. Also I don't have a backup.
    Suman

    - open http://service.sap.com/notes
    - enter "ORA-01251"
    - you will find Note 696141 - Composite SAP Note: ORA-01122
    and that section:
          10. ORA-01251: Unknown File Header Version read for file number <file_id>
    Reason: The file header cannot be correctly read.
    Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
               Otherwise: Restore/recovery
    Markus

  • ORA-01122: database file 30 failed verification check

    SQL*Plus: Release 10.1.0.4.2 - Production on Wed Feb 13 20:33:13 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    when starting the DB for 10gAS get following error, db is started but cannot sign in
    SQL> SQL> Connected.
    SQL> ALTER DATABASE open
    ERROR at line 1:
    ORA-01122: database file 30 failed verification check
    ORA-01110: data file 30: 'D:\ORACLE\ORADATA\PRT\APPS003_A.DBF'
    ORA-01203: wrong incarnation of this file - wrong creation SCN
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
    With the Partitioning, OLAP and Data Mining options

    You have a mismatch in the control file and data file scn numbers. What was done before the database was getting started? I once saw this error when some one moved one file from another munt point to another and there was no rename give to the control file and the control file got no idea which is this new file and where it had come from?
    Try finding the control file which is of the same backup as of this datafile.
    Aman....

  • Database file 4 failed verification check

    Hello,
    When I start database, message displayed as
    follows:
    ORA-01122: database file 4 failed verification check
    ORA-01110: data file 4: '/usr/nas/databases/D1/DADM/oracle/datafiles/DADM_rollback1.dbf'
    ORA-01251: Unknown File Header Version read for file number 4
    Database is not started up.
    I need help how to fix it.
    Thanks in advance
    null

    Dear,
    This error says that urs current datafile is corrupted their are two to three solution on which we can work out.......
    1.if urs database is in Archive log then do the following
    a) shutdown the database
    b) start mount
    c) make sure that u have all the archive log file in the directory where they should be
    d) recover database, then it will ask all archive log file just press enter or write Auto their,
    2) If urs database is not in Archive log then u have restore from urs lsat backuup.
    3) If this datafile if not very much in use u can make it offline and start urs database.
    null

  • Error:server return code 0x8002000E: file failed crc check

    Hi Experts,
                         I am trying to connect to repository in MDM through MDM ABAP API after all the configuration settings in MDMAPIC on execution of the report it gives the error   server return code 0x8002000E: file failed crc check, can anyone provide some helpfull in puts on this problem.
    Thanks,
    Vinay Yadav

    hi,
    follow this link:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=4119
    hope this may help you,
    Regards,
    srinivas

  • ORA-01122: database file 8 failed verification check

    trc file: "dev_w0", trc level: 1, release: "700"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Tue Apr 29 17:57:51 2014
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
    B  New connection 0 created
    M sysno      00
    M sid        DEV
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    75
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        2816
    M
    M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2816) [dpxxdisp.c   1299]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
    M  DpShMCreate: sizeof(wp_adm) 18304 (1408)
    M  DpShMCreate: sizeof(tm_adm) 3994272 (19872)
    M  DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    M  DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm) 528064 (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064
    M  DpShMCreate: sizeof(file_adm) 208064 (72)
    M  DpShMCreate: sizeof(vmc_adm) 18720 (1440)
    M  DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm) 48
    M  DpShMCreate: SHM_DP_ADM_KEY (addr: 08750040, size: 4880152)
    M  DpShMCreate: allocated sys_adm at 08750040
    M  DpShMCreate: allocated wp_adm at 08751E40
    M  DpShMCreate: allocated tm_adm_list at 087565C0
    M  DpShMCreate: allocated tm_adm at 087565F0
    M  DpShMCreate: allocated wp_ca_adm at 08B25890
    M  DpShMCreate: allocated appc_ca_adm at 08B2B650
    M  DpShMCreate: allocated comm_adm at 08B2D590
    M  DpShMCreate: allocated file_adm at 08BAE450
    M  DpShMCreate: allocated vmc_adm_list at 08BE1110
    M  DpShMCreate: allocated gw_adm at 08BE1150
    M  DpShMCreate: allocated vmc_adm at 08BE1180
    M  DpShMCreate: allocated ca_info at 08BE5AA0
    M  DpShMCreate: allocated wall_adm at 08BE5AA8
    M  DpSesCreateTable: attached session table at 06440040 (len=138424)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X 
    X Tue Apr 29 17:57:52 2014
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  DpVmcInit2: o.k.
    M 
    M Tue Apr 29 17:57:53 2014
    M  ThInit: running on host sapecc6
    M 
    M Tue Apr 29 17:57:54 2014
    M  calling db_connect ...
    C  Prepending D:\usr\sap\DEV\DVEBMGS00\exe to Path.
    C  Oracle Client Version: '10.2.0.1.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   06C34308   06C398A4   06C3912C
    C  Attaching to DB Server DEV (con_hdl=0,svchp=06C39078,svrhp=06C4A944)
    C  Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
    C 
    C Tue Apr 29 17:57:55 2014
    C  Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
    C  Got SAPSR3's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=06C39078,usrhp=06C979A8)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   06C34308   06C398A4   06C3912C
    C  Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
    C  Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  Database instance DEV is running on SAPECC6 with ORACLE version 10.2.0.2.0 since 20140429
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20140429 175754 SAPECC6        
    M  db_connect o.k.
    M  ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
    M  ThVmcSetParam: switch vmcj/vm_auto_restart 0 -> 0 sec
    J 
    J Tue Apr 29 17:57:57 2014
    J  extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:2756)
    J  extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:2587)
    J  extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:2624)
    J  extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:2643)
    J  extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:1941)
    J  extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2019)
    J  extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2070)
    J  extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2097)
    J  extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2124)
    J  extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2149)
    J  extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:2662)
    J  extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:2688)
    J  extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:2833)
    J  extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:2845)
    J  extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:2857)
    J  extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:2902)
    J  extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:2914)
    J  extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:2926)
    J  extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:2710)
    J  extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1410)
    J  extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1437)
    J  extGetPid is set to disp+work.ThJGetPid(thxxjava.c:7663)
    J  extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1178)
    J  extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1190)
    J  extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1202)
    J  extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6095)
    J  extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
    J  extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
    J  extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6065)
    J  extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:545)
    J  extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:551)
    J  extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:641)
    J  extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:665)
    J  extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:685)
    J  extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:780)
    J  extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:853)
    J  extMtxForceUnlock is set to disp+work.ThJMtxForceUnlock(thxxvmemu.c:928)
    J  extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:975)
    J  extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:981)
    J  extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1013)
    J  extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1046)
    J  extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1101)
    J  extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
    J  extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
    J  extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
    J  extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
    J  extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
    J  extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
    J  extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
    J  extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
    J  extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
    J  extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
    J  extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
    J  extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
    J  extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
    J  extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
    J  extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
    J  extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
    J  extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
    J  extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:798)
    J  extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1147)
    J  extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1569)
    J  extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:985)
    J  extConnect is set to disp+work.ThSoConnect(thxxsock.c:809)
    J  extBind is set to disp+work.ThSoBind(thxxsock.c:1804)
    J  extAccept is set to disp+work.ThSoAccept(thxxsock.c:1985)
    J  extListen is set to disp+work.ThSoListen(thxxsock.c:2230)
    J  extPoll is set to disp+work.ThSoPoll(thxxsock.c:2381)
    J  extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2633)
    J  extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2787)
    J  extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:2963)
    J  extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3122)
    J  extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3305)
    J  extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3464)
    J  extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3099)
    J  extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3113)
    J  extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6147)
    J  extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:7500)
    J  extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:7508)
    J  extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:7513)
    J  extAlarm is set to disp+work.ThJAlarm(thxxjava.c:6215)
    J  setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:6386)
    J  getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:6374)
    J  getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2002)
    J  getWpNoHook is set to disp+work.DpWpAdmEntry(dpxxtool.c:3215)
    J  getVmCount is set to disp+work.ThJGetVmcCount(thxxjava.c:3154)
    J  getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1099)
    J  selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:335)
    J  rollOut is set to disp+work.ThJRollOut(thxxjava.c:5737)
    J  sleepFunc is set to disp+work.ThJSleep(thxxjava.c:6901)
    J  selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:7292)
    J  proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:7610)
    J  extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:7423)
    J  getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:7675)
    J  getVmType is set to disp+work.ThJGetVmType(thxxjava.c:7687)
    J  getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3049)
    J  getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:9681)
    J  isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3075)
    J  getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3059)
    J  createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3084)
    J  statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:7830)
    J  openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:7852)
    J  closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:7868)
    J  intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:7885)
    J  extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3129)
    J  extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:6250)
    J  extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3150)
    J  extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:6264)
    J  extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:6276)
    J  extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:2500)
    J  extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:6288)
    J  extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:6309)
    J  extCheckForCleanup is set to <null>
    J  extJvmxInit2 is set to <null>
    J  extJvmxCleanup is set to <null>
    M  ThVmcInitWaitForVm: th_maxWaitForVmTime=30
    I 
    I Tue Apr 29 17:58:05 2014
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF (addr: 0BD30040, size: 4400000)
    M  SHM_ROLL_AREA (addr: 59250040, size: 61440000)
    M  SHM_PAGING_AREA (addr: 0C7D0040, size: 32768000)
    M  SHM_ROLL_ADM (addr: 0C170040, size: 615040)
    M  SHM_PAGING_ADM (addr: 0C210040, size: 525344)
    M  ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C2A0040
    M  ThCreateNoBuffer index size: 3000 elems
    M  ThCreateVBAdm allocated 12160 bytes (50 server) at 0C330040
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    X  ES initialized.
    C 
    C Tue Apr 29 17:58:06 2014
    C  *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
    [dbsloci.c    12548]
    C  sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT                        
    C  SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
    C  sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT                        
    C  prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06C51FC0
    C  IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
    C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
    C  OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05637578,vda_p=06C5DB68
    C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
    C  SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
    B  ***LOG BYL=> DBQ action required because of database error            [dbsh#2 @ 1100] [dbsh    1100 ]
    B  SQL code: 376, SQL text: ORA-00376: file 8 cannot be read at this time
    B  ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5'
    B  ***LOG BY4=> sql error 376    performing SEL on table DDNTT      [dbstat#4 @ 693] [dbstat  0693 ]
    B  ***LOG BY0=> ORA-00376: file 8 cannot be read at this time
    ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5' [dbstat#4 @ 693] [dbstat  0693 ]
    B  init: Got no entries from DDNTT !
    B  init failed
    B  db_stinit failed
    M  *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c  260]
    M  *** ERROR => ThIPCInit: hook failed [thxxhead.c   2047]
    M  ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1494]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sapecc6_DEV_00 on host sapecc6 (wp 0)
    M  *  ERROR       ThInit: ThIPCInit
    M  *
    M  *  TIME        Tue Apr 29 17:58:06 2014
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          17
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2816) [dpnttool.c   327]
    sql>select status from v$datafile;
    status
    One of my datafile status is 'RECOVER'
    SQL>recover datafile 8;
    ora_00283 recover session cancelled due to errors
    ora_01110:datafile 8:'d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
    ora_01122:database file 8 failed cerification check
    ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
    ora_01251:unknown file header version read for file number 8
      Please give me the suggestion..
    Best regards
    nani

    Hi K Nani,
    From your error message
    ora_01122:database file 8 failed cerification check
    ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
    ora_01251:unknown file header version read for file number 8
    Looks like Data file is corrupted.
    You may refer SAP note 696141 - Composite SAP Note: ORA-01122
    10. ORA-01251: Unknown File Header Version read for file number <file_id>
    Reason: The file header cannot be correctly read.
    Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
               Otherwise: Restore/recovery
    Only solution here is restore the database from backup.
    Alternate solution If it is a non-production system.
    If the file is corrupted, then take the datafile offline and open the database.
    Hope this helps
    Regards,
    Deepak Kori

  • Update file fails verification

    Hi..
    When running software update the files all download then fail verification and so won't install. I've tried downloading the files manually from the site with the same result. I've tried both about 3 times each.
    I've downloaded other things from the web that seem ok.
    Any ideas?

    The resolution was a faulty internet router corrupting the file.

  • Database file changed ora-01251   how to solve?

    hai all,
    database file changed ora-01251 how to solve?
    suddenly changed when i try to connect Oracle Management server(OMS)
    thanks
    rcs
    =======
    os:winxp
    db:Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
    SQL> Recover database
    ORA-00283: recovery session canceled due to errors
    ORA-01110: data file 9: 'F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA'
    ORA-01122: database file 9 failed verification check
    ORA-01110: data file 9: 'F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA'
    ORA-01251: Unknown File Header Version read for file number 9
    WRONG FILE TYPE
    F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA
    ========

    Hi..
    Would like to know if any changes were done before this error popped up..
    From metalink :--
    >
    Error:     ORA-1251
    Text:     Unknown File Header Version read for file number %s
    Cause:     Read of the file header returned a record but its version cannot be
         identified. Either the header has been corrupted, or the file is not a
         valid database file.
    Action:     Have the operating system make the correct file available to the
         database, or recover the file.
    >
    If the file is corrupted, then take the datafile offline and open the database.If it was renamed, then you can check metalink Doc ID:      230449.1
    if the database is in archive log mode, you can refer to metalink Doc ID: 333620.1
    HTH
    Anand

  • J2EE Engine start error: Database initialization failed!

    My J2EE engine now fails to start - jcontrol stays yellow.  I've followed Troubleshooting pages from help.sap.com Admin manual topic "starting J2EE Engine".
    Background:
    I was running through JDI Scenario 2+ on a fresh installed WebAS 6.40 at SP9.  Using NWDevStudio2.09, I attempted to load a DC, but servers stopped responding.  So I downed everything (in MMC) including offlining the DB, then put DB back online and restart the J2E engine, and now jcontrol stays yellow. 
    I find this in the file log_bootstrap_ID0014430.0.log:
    Apr 7, 2005 3:10:23 PM  ] Bootstrap MODE:
    [Apr 7, 2005 3:10:23 PM  ] <INSTANCE GLOBALS>
    [Apr 7, 2005 3:10:23 PM  ]  determined by parameter [ID0014430].
    [Apr 7, 2005 3:10:23 PM  ] -
    [Apr 7, 2005 3:10:26 PM  ] Exception occured:
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
    .........a few lines cut out here..........
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:344)
    ............ a few lines cut out here..........
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://PHI21811/J2E [Cannot connect to host PHI21811 [Connection refused: connect], -813.].
         at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:183)
         at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:570)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:294)
         ... 14 more
    [Apr 7, 2005 3:10:26 PM  ] [Bootstrap module]> Problem occured while performing synchronization.
    [Apr 7, 2005 3:22:24 PM  ] -
    ANYONE HAVE ANY SUGGESTIONS?????

    Using the Database Administration section of the help.sap.com library, I found the location of SAPDB/MySQL log files.  They are in C:\sapdb\data\wrk\J2E.  In 'knldiag' I found entries complaining of Log files being full and tasks put in suspension.
    So I figured out to do a full back up of the DB and/or backup the log files.  The log file bar (in MMC) still showed 100% full, but I figured out to refresh the view and voila it was empty (so one of the backups emptied it, not sure which one).
    After that the DB comes up fine and now my J2E WebAS goes all green.
    Message was edited by: Michael W Rains

  • Database initialization failed after attach the database.

    Hello Everyone,
    I have a problem after detaching the database and attaching it again (I moved the database to another partition because of shortage of disk space). Then, I find that the system can not start. (I've two systems and now neither of them could start). The error seems very similar.
    In the pure java system(netweaver 04s) log: jvm_bootstrap.out,
    com.sap.engine.bootstrap.synchronizationException: Database Initializtion Failed! Check database properties.
    com.sap.engine.frame.core.configuration.configurationException: Error while connecting to DB.
    Caused by: java.sql.SQLException: [NWMss] [SQLServer JDBC Driver] [SQLServer] Login failed for user 'SAPBP0DB'.
    In pure ABAP system(Netweaver 04s) log: dev_w12:
    openoledbConnection: MARS property was not set.
    openoledbConnection: line 23722. hr: 0x8000ffff login failed for user 'CNDT50083414\SAPServiceBE0'.
    sloledb.cpp [openoledbConnection, line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    sloledb.cpp [openoledbConnection, line 23722]: Error/Message: (err 0, sev 0), Invalid string connection attribute.
    Is this because the DB not started? In Windows Services, I found 'MSSQLServer' is started.
    How can I trace down to this problem? I don't have much idea on DB...
    All your kindly help is greatly appreciated.
    Best Regards,

    Hi Karan,
    Thank you for your reply. I attach the dev_w0 file here:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Tue Sep 23 13:16:15 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll' is "700.08", patchlevel (0.158)
    B  New connection 0 created
    M sysno      02
    M sid        BE0
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    159
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        1704
    M
    M  kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1704) [dpxxdisp.c   1316]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          21008     (1616)
    M  DpShMCreate: sizeof(tm_adm)          5912624     (29416)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000011080050, size: 6604928)
    M  DpShMCreate: allocated sys_adm at 0000000011080050
    M  DpShMCreate: allocated wp_adm at 0000000011082150
    M  DpShMCreate: allocated tm_adm_list at 0000000011087360
    M  DpShMCreate: allocated tm_adm at 00000000110873C0
    M  DpShMCreate: allocated wp_ca_adm at 000000001162ABF0
    M  DpShMCreate: allocated appc_ca_adm at 00000000116309B0
    M  DpShMCreate: allocated comm_adm at 00000000116328F0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 00000000116B9580
    M  DpShMCreate: allocated gw_adm at 00000000116B9600
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 00000000116B9630
    M  DpShMCreate: allocated wall_adm at 00000000116B9640
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host CNDT50083414
    M 
    M Tue Sep 23 13:16:16 2008
    M  calling db_connect ...
    C  Thread ID:6104
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      158
    C    patchcomment Corrections of odbc-based dbsl: dsql: optype, DSN (1135165)
    C  np:(local) connection used on CNDT50083414
    C  CopyLocalParameters: dbuser is 'be0'
    C 
    C Tue Sep 23 13:16:17 2008
    C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
    C  Using provider SQLOLEDB instead.
    C  OpenOledbConnection: MARS property was not set.
    C  OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
    C  Using provider SQLOLEDB instead.
    C  OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
    C  Using provider SQLOLEDB instead.
    C  OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn to np:(local).
    C  Retrying without protocol specifier: (local)
    C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
    C  Using provider SQLOLEDB instead.
    C  OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
    C  Using provider SQLOLEDB instead.
    C  OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
    C  Using provider SQLOLEDB instead.
    C  OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> Login failed for user 'CNDT50083414\SAPServiceBE0'. [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error -1     performing CON [dblink#5 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Login failed for user 'CNDT50083414\SAPServiceBE0'. [dblink#5 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10504]
    M 
    M  Info for wp 0
    M 
    M    pid = 1704
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server CNDT50083414_BE0_02 on host CNDT50083414 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Tue Sep 23 13:16:17 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10724
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 1704) [dpnttool.c   333]

  • How do the application servers connect the new database after failing over from primary DB to standby DB

    How do the application servers connect the new database after failing over from primary DB to standby DB?
    We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
    When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround. 
    Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
    Oracle support provides us the answer as following:
    ==================================================================
    Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
    After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
    Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
    JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
    FAN server-side callouts can be configured on the database tier.
    FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
    =======================================================================================
    Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
    Thank very much in advance.

    Hi mesbeg,
    Thanks alot.
    For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
            <subsystem xmlns="urn:jboss:domain:datasources:1.0">
            <datasources>
                    <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                        <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                        <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                        <driver>oracle</driver>
                        <pool>
                            <min-pool-size>2</min-pool-size>
                            <max-pool-size>10</max-pool-size>
                            <prefill>true</prefill>
                        </pool>
                        <security>
                            <user-name>TEST_USER</user-name>
                            <password>Password1</password>
                        </security>
                        <validation>
                            <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                            <validate-on-match>false</validate-on-match>
                            <background-validation>false</background-validation>
                            <use-fast-fail>false</use-fast-fail>
                            <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                            <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                        </validation>
                    </datasource>
                    <drivers>
                        <driver name="oracle" module="com.oracle.jdbc">
                            <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                        </driver>
                    </drivers>
                </datasources>
            </subsystem>
    If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

  • Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

    I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
    gave same error. I browsed msdn blog. But nothing help me out.
    Below is the error log details--
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2061893606
      Start time:                    2013-10-21 12:58:05
      End time:                      2013-10-21 13:52:30
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for RS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for DQ:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for FullText:        Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  CROY-TOSH
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
      Installation edition:          Developer
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLSERVERAGENT
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
      ASCOLLATION:                   Latin1_General_CI_AI
      ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
      ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
      ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  NT Service\MSSQLServerOLAPService
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            CRoy-TOSH\CRoy
      ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   ROY
      CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
      CLTSTARTUPTYPE:                Manual
      CLTSVCACCOUNT:                 NT Service\SQL Server Distributed Replay Client
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               Manual
      CTLRSVCACCOUNT:                NT Service\SQL Server Distributed Replay Controller
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     CRoy-TOSH\CRoy
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                true
      FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
      FILESTREAMLEVEL:               2
      FILESTREAMSHARENAME:           MSSQLSERVER
      FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  false
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT Service\MsDtsServer110
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              SharePointFilesOnlyMode
      RSSVCACCOUNT:                  NT Service\ReportServer
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  Latin1_General_CI_AI
      SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           CRoy-TOSH\CRoy
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    0
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Complete
      Status:                        Passed
      Feature:                       Client Tools Connectivity
      Status:                        Passed
      Feature:                       Client Tools SDK
      Status:                        Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Passed
      Feature:                       Management Tools - Basic
      Status:                        Passed
      Feature:                       SQL Server Data Tools
      Status:                        Passed
      Feature:                       Reporting Services - Native
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Data Quality Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Master Data Services
      Status:                        Passed
      Feature:                       Distributed Replay Client
      Status:                        Passed
      Feature:                       Distributed Replay Controller
      Status:                        Passed
      Feature:                       Integration Services
      Status:                        Passed
      Feature:                       Data Quality Client
      Status:                        Passed
      Feature:                       Analysis Services
      Status:                        Passed
      Feature:                       Reporting Services - SharePoint
      Status:                        Passed
      Feature:                       Reporting Services Add-in for SharePoint Products
      Status:                        Passed
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       Documentation Components
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

    Hi,
    This 3rd time I followed this link. But nothing new, same error.
    Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
    Server Configuration Manager(Local) 
    From here I folllowed the steps ---[I cannt insert link/image :-(]
    SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed" 
    If I right clicked on SQL Server Service, there is no option to change the account. 
    Hello,
    Thanks for your patience,did you tried stesp mentioned in below article
    http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
    To resolve it, follow these steps:-
    When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
    been created. Check the Services console.
    If the service is present, perform the following steps:-
    1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
    it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
    Use this link to change sql server service account
    http://technet.microsoft.com/en-us/library/ms345578.aspx
    2. Next, try to start the service. It should come online.
    3. However, you will not be able to log in to the SQL Server
    4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
    5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
    6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
    Also add the builtin/administrators to the sysadmin role
    7. Now stop the service from the command prompt and start it from SQL Server configuration manager
    You should be able to log in to the server now.
    Hope this helps someone.
    Please revert if it helps or even if it does not
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Standby database not configure while keep database files in different place

    Dear Friends ,
    I have to successfully configured "PHYSICAL STANDBY DATABASE" within the TWO databases ("PRIM" and "STAN" Database) when I kept datafile, controlfile and redolog files in the same location (like, "/u01/app/oracle/oradata/prim" location .
    In this successful configuration , I have to add the below two lines into the initprim.ora and initstan.ora both server respectively ...
    initprim.ora:
    ========
    DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
    LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
    initstan.ora:
    ========
    DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
    LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Now , in second scenario , I have to change Primary database server's datafile, controlfile and redolog file in the below folder :
    controlfile --> "/u01/app/oracle/oradata/prim/ctrlfile"
    redologfile --> "/u01/app/oracle/oradata/prim/redofile"
    datafile --> "/u01/app/oracle/oradata/prim/datafile"
    Similarly I have to create same folder in my STAN database server accordingly . and also add the above lines in same way :
    initprim.ora:
    ========
    DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
    LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
    initstan.ora:
    ========
    DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
    LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Keeping the above situation when I run the below command in STAN database server :
    [oracle@test ~]$ sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 15 23:15:43 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> conn / as sysdba
    Connected to an idle instance.
    SQL> startup mount
    ORACLE instance started.
    Total System Global Area 599785472 bytes
    Fixed Size 1220772 bytes
    Variable Size 163581788 bytes
    Database Buffers 427819008 bytes
    Redo Buffers 7163904 bytes
    Database mounted.
    SQL> alter database recover managed standby database disconnect from session;
    Database altered.
    The Command execute successfully but in the alert log of the STAN database server ,I get the below error :
    Completed: alter database recover managed standby database disconnect from session
    Mon Nov 15 22:46:52 2010
    Clearing online redo logfile 1 complete
    Mon Nov 15 22:46:52 2010
    Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    Mon Nov 15 22:46:52 2010
    Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3But I already created the above mention folder "'/u01/app/oracle/oradata/prim/redofile" successfully and the redo log files are also created there successfully , but I cannot understand why this error is showed ? And also no archivelogs are shifted from PRIM database server to STAN database server .
    Would u plz suggest me , why I cannot configure Physical Standby Database when I keep my database fles in the separate location ?
    help me plz ... ...

    Hi,
    I'm missing the steps you took renaming/moving the files on the primary.
    Since the location of datafiles is stored in the control file the controlfile of the standby might not know the new location yet.
    I suggest you read this http://www.cs.bris.ac.uk/maintain/OracleDocs/server.816/a76995/standby.htm#23603 and see if that helps
    Success,
    FJFranken

  • Redo log files are not applying to standby database

    Hi everyone!!
    I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
    My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database.  I run the following command on the standby database.
                SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
    It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
    The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
    1. How to resolve this issue ?
    2.Is it compulsory to have Primary database open ?
    3. I have created standby  control file by using  command
              SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
    So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should  I have different database name for both or existing one is correct ?
    Can anybody help me to come out from this stuck ?
    Thanks & Regards
    Tushar Lapani

    Thank you Girish. It solved  my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
    I did following scenario.
    1.  Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
    2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
    3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
    So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
    Thanks

  • Oracle UCM fails to check in text/xml files

    We have an Oracle UCM server that is failing to check in xml files over a certain size - I haven't narrowed down the size limit yet, but a <100kb file will work 100% of the time, while 300+ Kb xml files fail almost all the time, though there has been some success. Image files and zip file succeed on new check ins 100% of the time as well. We have tried with the SOAP API and the UCM new check in form - in both cases we get an empty repsonse from the server. In firefox we get the "The connection was reset" page. I'm at a loss as to explain why, but I have almost no experience with Oracle UCM. This particular server has been running for over a year happily accepting xml files of all sizes, then one day just stopped - as far as I am aware, nobody changed any
    settings/upgraded anything/changed network topology.
    When I look in the server output, I don't really see any indication of failure or find any mention of the file name or content title like I do when a file successfully checks in.
    I have already asked the DBA to drop and rebuild the database index, started the Collection rebuild cycle (it finished successfully) and turned on the webless file store option on the defaultfilestore provider.
    UCS Version : 10.1.3.3.3 (080807) (Build:7.2.2.188)
    Database : Microsoft SQL Server 09.00.4035 currently using DATABASE.METADATA though I think it was at one point using Full text search, but the database was not.
    Java Version:1.6.0
    Please ask if there is any other information you need, but I do not have physical access to the machine, and I may not be able to reveal certain info due to privacy/security concerns.

    Hello,
    I think you should open an SR with support to help out. Be that as it may, here's some observations/suggestions...
    * You are running a 4-year old content server. There have been numerous fixes since then. Your system may have grown to a point where it's hit one of the older issues.
    * Is it possible the XML encoding may have changed? i.e. that whatever generates the XML files is now generating them slightly differently and therefore the encoding is different so check-in doesn't follow the same rules? I'd look at the first line of older files versus the new files which fail. If there's a difference, refer to KM note 978689.1 in our knowledge base.
    * You say there doesn't appear to be anything in the logs, so let's increase them:
    - Login to UCM as Administrator. Go to Administration->System Audit Information. Switch on the Full Verbose Tracing checkbox. In the Active Sections field, put in:
    systemdatabase - this will show you what queries and inserts are made to the database and should show whether there's a problem at that level.
    requestaudit - this shows you the requests as they come in, as well as a roundup of all requests every 2 minutes. If you see large amounts of time being taken on requests, your server could be creaking because of resources.
    publish - tells you about publishing related issues, most XML file check-ins are related to this.
    - Try to check in a file which should fail.
    - Switch off verbose logging (see above) to reduce overhead.
    If the OS is Windows then the <install>/config.cfg file needs to have UseRedirectedOutput=true in order to generate a log file for this tracing. On Windows the file is the <install>/bin/IdcServerNT.log file. (if the above config is set)
    On *nix it is in the <install>/etc/log file (notice that there is no file extension on the file)
    If none of the logs helps you, an SR is probably in order.
    Regards,
    Frank.

Maybe you are looking for